番红花红T敏化的新型光致聚合物全息存储材料

制备了一种以番红花红T为光敏剂的新型全息存储材料,实验结果表明,该材料具有较高的衍射效率、曝光灵敏度和较大的折射率调制度等,最大衍射效率约38.5%,折射率调制度为0.547×10－3,在存储介质膜中存储了模拟全息图像,再现图像有较好的保真度,说明该材料适合用作高密度体全息存储介质。     

在光致聚合物中采用脉冲激光记录全息图的记录条件研究

在蓝绿敏光致聚合物材料中,用532 nm激光器作为光源,在等光强不同重复频率和等重复频率不同光强条件下分别进行全息记录,用红光进行动态读出,获得两种记录条件下的衍射效率曲线.实验结果表明,在近连续脉冲光下进行全息记录时,较低重复频率和较低光强的脉冲激光能够明显提高光致聚合物光栅的最高衍射效率,通过优化脉冲激光的重复频率和平均光强,可以在材料中记录衍射效率最高的全息图.     

Study of effective optical thickness in photopolymer for application

The impact of the effective optical thickness of a photopolymer on its holographic performance was studied. To overcome the attenuation of gratings for a better uniformity, a multilayer approach was introduced, by adjusting concentrations of dye along the depth of photopolymer to compensate the attenuation of recording light due to absorption. Multilayer photopolymers with thicknesses over 500 μm were designed, fabricated, and characterized experimentally, exhibiting better Bragg selectivity. More holograms were stored in multilayer material by angular multiplexing, and the cumulative grating strength was enhanced, leading towards larger holographic storage capacity.     

Distortions in pixel-matched holographic data storage due to lateral dimensional change of photopolymer storage media

Dimensional changes in polymerizable storage materials during exposure are a source of pixel misregistration in digital holographic storage. Lateral shrinkage or expansion of photopolymer recording materials can be deduced from quantitative measurement of the shift and the magnification errors of reconstructed holograms.     

A wideband sensitive holographic photopolymer

A novel wideband sensitive dry holographic photopolymer sensitized by rose bengal (RB) and methylene blue (MB) is fabricated, the holographic storage characteristics of which are investigated under different exposure wavelengths. The result shows that the sensitive spectral band exceeds 200 nm in visible light range, the maximum diffraction efficiency under different exposure wavelengths is more than 40% and decreases with the decrease of exposure wavelength, the exposure sensitivity is not change with the exposure wavelength.This photopolymer is appropriate for wavelength multiplexing or multi-wavelength recording in digital holographic storage.     

多路角度复用体全息三维显示技术

为满足高分辨率真三维大数据显示的空间带宽积要求,提出一种基于多通道角度复用模式的体全息三维显示技术。通过对三维场景进行波前编码,获得相位计算全息图,并将计算全息图依次按照不同角度复用记录到掺杂金纳米颗粒体全息光致聚合物材料的同一区域,获得复用体全息图,再现时可以在不同角度观察三维场景。在体全息三维显示实验系统中,实现体全息材料记录区域的单点像素总数为120×1 920×1 080,显示的空间带宽积达到了2.5×108,相对于空间光调制器显示提升了120倍。     

紫光至红光敏感的多波长复用全息存储材料

制备了一种对紫光至红光波段敏感的光致聚合物全息存储材料,用476 nm、488 nm、496 nm、514.5 nm及632.8 nm五种波长曝光对其进行光全息性能的研究.研究表明,该材料在各种波长下的最大衍射效率均不低于45%,曝光灵敏度大于4.22×10－3 cm2·mJ－1,折射率调制度高于1.62×10－4,光栅频率接近3 000 lp/mm等.     

Holographic recording in a photopolymer by optically induced detachment of chromophores

We demonstrate holographic recording in a new photopolymer system. The recording material is created by copolymerization of an optically inert monomer, methyl methacrylate, and a second monomer that is optically sensitive. On exposure of the recording material to light, a portion of the optically sensitive component detaches from the polymer matrix and causes hologram amplification through diffusion of the free molecules. We measured postrecording grating amplifications as high as 170% by this process. The recorded holograms are persistent at room temperature under continuous illumination at the recording wavelength.     

含氟红敏光致聚合物全息材料的组成优化

用低折射率的含氟共聚物为光致聚合物全息材料的成膜物,以增加全息记录材料折射率的空间可调制程度。用溶液聚合法合成了低折射率的水溶性甲基丙烯酸2,2,3,3-四氟丙酯-甲基丙烯酸共聚物(折射率为1.441),以该共聚物为成膜物质,丙烯酰胺为单体、亚甲基蓝为光敏染料、三乙醇胺为引发剂配制了光致聚合物薄膜;经过对光致聚合物组成构成的优化,在空间分辨力为1580lp/mm时,光致聚合物薄膜的灵敏度约为19 mJ/cm2,衍射效率可达93%,两者均优于以聚乙烯醇(PVA)为成膜物质的光致聚合物材料。     

Experimental study of multiplexed holographic gratings recorded in a photopolymerizable silica glass

Recently the capability of photopolymerizable sol–gel materials to angular multiplex holographic gratings has been demonstrated [1, 2]. In this study, holographic transmission gratings were recorded using angular multiplexing in a silica glass doped photopolymer holographic recording material. The time interval between exposures and the angular selectivity were analyzed, in particular their effects on the dynamic range. By using the optimal parameters gratings of similar response were achieved with values of M/#=4.8, as well as good values of diffraction efficiency with high photosensitivity. PACS 42.40.Pa; 42.70.Ln     

光致聚合物的高密度数字全息存储特性综述

文章综述了光致聚合物的高密度数字全息存储特性,可以看到光致聚合物将是高密度数字全息存储最有希望最先获得突破的材料。     

抗水性光致聚合物的体全息存储研究

提出了基于酞菁染料的全息记录材料,与目前已报道的基于丙烯酞胺基单体光聚合型全息记录介质相比,该聚合体系显示了优良的全息特性：全“干”热后处理,良好的抗水性和环境稳定性,制备过程简单和低毒性,并可制备成较厚的感光膜层。针对存储过程的页间和页内串扰做了理论分析和MTALAB仿真,采用自主研制的抗水性光致聚合物材料记录多幅不同图像的实验方案,分析了本抗水性全息材料的角度复用性能。     

国产KL全色全息干板感光特性研究

为了用国产KL型全色全息干板制作真彩色反射全息图,对KL全息干板的感光特性进行了实验研究.介绍了实验的光路,化学处理方法,三基色的选择.测试了底片单波长记录的感光特性和波长灵敏度,对三基色波长记录的特性进行了实验和分析,结果表明KL全息干板可用于记录真彩色反射全息图.     

双染料敏化光致聚合物的光化动力学研究

研究了光致聚合物的光化学反应理论模型及其动力学参量。合成了染料藻红B和亚甲基蓝作为联合光敏剂共同敏化的全息光存储光致聚合物材料。对材料测试分别得到在曝光波长为633 nm与曝光强度为65 mW/cm2时,透射率随曝光条件的变化关系以及材料各光化学参量。结果表明,随着曝光波长与曝光强度的增加,光致聚合物的光化漂白速率常数k与量子产率Φ增大,当曝光强度为65 mW/cm2时透射率在短波长下出现了下降,光化漂白速率常数k出现负值,而摩尔吸收系数ε在条件不同时则表现了不同的变化趋势。     

Photochemical kinetics for holographic grating formation in phenanthrenequinone doped poly (methyl methacrylate) photopolymer

The photochemical kinetics of phenanthrenequinone (PQ) doped poly (methyl methacrylate) photopolymer in holographic recording was studied theoretically and experimentally. The diffusion of PQ molecules during holographic recording was negligible because of its small diffusion coefficient at room temperature. A photochemical reaction kinetics model of PQ/PMMA was established. The analytical expressions for the temporal variations of transmittance and diffraction efficiency were derived. By fitting the experimental curves, some parameters related with the polymer components were obtained by the proposed model, which can be used to analyze the photochemical process and will be helpful to the optimization of material preparation.     

High-density holographic recording parameters under different wavelength of a two dyes-sensitized photopolymer

The high-density holographic recording parameters of a novel two dyes-sensitized photopolymer under different exposure wavelengths are studied. The results show that the maximum diffraction efficiency, exposure sensitivity, maximum refraction index modulation, dynamic range, and the exposure time constant increases with the increase of the exposure wavelength. The analysis indicates that the scattering has an important role in the forming of the holographic grating.     

Formation of Holographic Transmission Diffraction Gratings in Absorbing Photopolymer Media

The formation of holographic transmission gratings in absorbent photopolymer materials (PPM) is studied theoretically. Analytical model describing a spatiotemporal transformation of holographic grating field during record is developed with allowance for optical absorption and diffusion processes. It is demonstrated that optical attenuation during record causes the spatial inhomogeneity of refractive index grating profile and of the its growth kinetics. A degree of influence of optical attenuation on the integral diffraction characteristics is evaluated based on numerical simulation. The kinetics of record of high-efficient transmission holograms in PPM is experimentally investigated. Based on a comparison of theoretical and experimental time dependences of diffraction efficiency, physical parameters of the examined PPM are determined and adequacy and tendency in the development of the suggested mathematical model are evaluated.     

红敏光聚合物干板的使用特性

光聚合物是一种新的光全息记录材料.本文介绍了红敏光聚合物干板在学生全息实验中的使用情况,实验测定了该干板的曝光均匀性、全息图的稳定性以及异丙醇溶液和热风吹干的作用.     

碱性品红敏化的光致聚合物在441nm短波长的全息存储特性研究

制备了一种以碱性品红为光敏剂的新型全息存储材料,且使用波长为441nm的He—Cd激光器成功研究了材料的全息特性。研究表明,该材料在短波长处仍具有较高的衍射效率、曝光灵敏度和较大的折射率调制度,衍射效率近60％,灵敏度为2．93×101c群／mJ,折射率调制度为8．85×10．。。在存储介质膜中存储了全息图像,再现图像较为清晰,对比度与保真度较为理想,说明该材料具有较好的全息存储性能,适合作为高密度全息存储介质。     

Fabrication and characterization of poly(methyl methacrylate) photopolymer doped with 9,10-phenanthrenequinone (PQ) based derivatives for volume holographic data storage

We present our studies on the photopolymer of poly(methyl methacrylate) (PMMA) doped with 9,10-phenanthrenequinone based derivatives for volume holographic storage. By introducing different functional groups on the side-chain of 9,10-phenanthrenequinone molecule, the holographic characteristics of the material can be modified. The photoreaction involved with the holographic recording in the samples was investigated by measuring UV-Vis absorption spectrum and mass spectrum. The experimental results show that the similar behaviors were exhibited in these photopolymers. It is found that phase hologram recording in our PQ derivatives doped PMMA photopolymer involves a structure change of the quinone based molecule, which induces a strong change of the refractive index. Experimental characterizations on holographic data storage, including material sensitivity, dynamic range (M#) and bit-error-rate have been performed. We found that, by selecting appropriate functional groups, an improvement in sensitivity and M# for holographic data storage can be achieved.