13C NMR方法研究聚甲基丙烯酸羟乙酯的立构序列分布

用C_o^oγ-射线辐照聚合方法,在20%(V/V)的乙醇溶液中成功地制备出了线性聚甲基丙烯酸羟乙酯。从在20MHz和35℃条件下获得的¹³CNMR光谱中,观察到该聚合物的二单元组、三单元组和五单元组单体序列分布。将所观察到的各类型碳的强度分布与通过柏努利统计模型所计算出的值进行比较,对各峰进行归了属。其结果表明,该聚合过程符合柏努利过程。用这种方法制备的聚甲基丙烯酸羟乙酯的三单元组规整度分别为:间规立构70.2%;杂规立构27.2%等规立构2.6%。     

无规聚甲基丙烯酸甲酯立构复合的红外光谱研究

用红外光谱研究了无规聚甲基丙烯酸甲酯的丙酮、苯、氯仿溶液成膜样品的立构复合状况。结果表明无规聚甲基丙烯酸甲酯在丙酮和苯中确能形成立构复合结构,结构的形成主要是依靠分子链中间规和等规链段的相互作用。对丙酮样品的退火实验表明,在退火过程中能够发生间规链段的自聚集现象。     

用红外谱带分离技术研究单向拉伸聚对苯二甲酸乙二酯薄膜的取向

用谱带分离技术可将聚对苯二甲酸乙二酯红外光谱中的1020cm~(-1)谱带分解为1204.2、1021.5和1017.8cm~(-1)三条谱带。可分别表征该高聚物中的晶区反式构象、非晶区反式构象和左右式构象三种结构。通过对这三条谱带的二向色性的测量,不需其他物理手段配合即可直接比较在不同拉伸条件下的聚对苯二甲酸乙二酯薄膜中上述三种结构的取向行为。     

PET与SAN/PAN复合膜界面的 FTIR-ATR研究

应用傅里叶衰减全反射红外光谱(FTIR-ATR)技术对聚对苯二甲酸乙二酯(PET)表面形成不同厚度的超薄苯乙烯-丙烯腈共聚物(SAN)和聚丙烯腈(PAN)的共混物膜及其SAN/PAN共混物膜的厚度、界面层PET亚甲基的构像变化等进行研究,结果表明PET表面共混物膜的厚度随共混物混合液中SAN含量的增加而增加,界面层成膜物质与基材的分子链段间发生了相互渗透和扩散,分子链的极性越相近,越容易成膜.对PET红外光谱吸收峰的A1340/A1410进行定量研究表明,在成膜过程中,PET分子链的亚甲基构像由反式向旁式转变,引起界面层PET的结晶度降低.FTIR-ATR是分析复合膜界面层结构信息的有效方法.     

硼酸三甲酯为探针红外光谱定量研究氧化镁的路易斯碱性

采用硼酸三甲酯(BATE)作为探针分子对MgO的路易斯碱性进行了红外光谱定量研究。MgO对硼酸三甲酯的吸附使硼酸三甲酯在1360cm-1的谱峰分裂成1410cm-1和1300cm-1两个峰,1036cm-1的谱峰紫移到1060cm-1。低压下吸收峰高与硼酸三甲酯压力成正比,与MgO含量成正比。结果表明MgO有一定的路易斯碱强度,与硼酸三甲酯之间的吸附是单分子层化学吸附。     

杂环有机锡化合物的谱学表征

合成了八个杂环芳基正丁基有机锡化合物,它们的通式是RnSnBu_(4-n)(R=2-呋喃基或2-噻吩基,n=l,2,3;R=2-(N-甲基)吡咯基或2-吡啶基,n=l)。其中二正丁基-二(2-呋喃基)锡、正丁基-三(2-呋喃基)锡、二正丁基-二(2-噻吩基)锡和正丁基-三(2-噻吩基)锡是新化合物。这些化合物都经过了元素分析和¹H、¹³C和¹¹⁹Sn NMR及IR谱表征,文中重点讨论了它们的谱学特征。     

金纳米颗粒修饰的粉末状多孔材料用于固相萃取及原位超灵敏度表面增强拉曼光谱检测

本文合成了一种基于金纳米颗粒修饰的粉末状聚甲基丙烯酸缩水甘油酯-二甲基丙烯酸乙二酯(GMA-EDMA)材料的表面增强拉曼光谱基底。将此基底作为固相萃取剂用于富集和原位的SERS检测。利用此方法对亚胺硫磷进行检测,可以得到5"g/L的样品分子信号。进一步对橙子表面亚胺硫磷进行检测,结果表明此方法对于农药残留的检测有着好的应用前景。     

磺胺二甲嘧啶分子印迹聚合物制备与光谱特性

本研究以磺胺二甲嘧啶为模板分子,甲基丙烯酸为功能单体,低温紫外引发聚合制备分子印迹聚合物,用紫外光谱法对磺胺二甲嘧啶与甲基丙烯酸的结合作用及磺胺二甲嘧啶印迹聚合物的静态吸附性能和选择性能进行研究,试验结果表明,溶液中的功能单体与印迹分子之间产生了结合作用;与空白印迹聚合物相比,以甲基丙烯酸为功能单体、磺胺二甲嘧啶为模板的分子印迹聚合物展现了较高的结合容量,与其他结构类似的底物磺胺异唑相比,磺胺二甲嘧啶分子印迹聚合物对磺胺二甲嘧啶模板分子显示出明显的选择性和特异性,静态分配系数K_D可达282.3 mg·mL-1,分离因子α可达3.9,并预测磺胺二甲嘧啶分子印迹聚合物结合机理。分析了甲基丙烯酸、二甲基丙烯酸乙二醇酯和磺胺二甲嘧啶分子印迹聚合物的红外谱图,研究结果表明制备的磺胺二甲嘧啶印迹聚合物中CC双键峰很小,并且功能键羧酸键没有明显变化,经交联聚合得到的聚合物确实存在可以同印迹分子相互作用的化学基团。     

无规共聚物与均聚物共混体系的相容性

用核磁共振方法(NMR)及差示扫描量热法(DSC)测定了苯乙烯-丙烯腈(SAN)无规共聚物与均聚物系列聚甲基丙烯酸甲酯(PMMA),聚甲基丙烯酸乙酯(PEMA),聚甲基丙烯酸正丁酯(PnBMA),聚甲基丙烯酸异丁酯(PiBMA)共混体系的有关参数,比较全面地研究了影响SAN与聚甲基丙烯酸酯类(PMAs)相容性的因素,对它们相容性的本质进行了探讨,得出了一些重要结论.     

两种含硅炔基树脂的固化行为研究

综合采用红外光谱（FTIR）、核磁碳谱 (13C NMR)、差示扫描量热（DSC）,热失重测试(TGA)等多种表征手段,研究了聚硅芳炔（PAR）和聚硅乙炔（PMR）两种含硅炔基树脂的固化行为,讨论了树脂固化物的结构与热稳定性的关系。结果表明：PAR和PMR树脂的固化机理不同,PAR主要通过炔基间的加成和Diels-Alder反应实现分子间的固化交联,并最终形成由苯环和稠芳环组成的芳构网络;PMR则主要通过硅氢基、炔基、烯基之间的加成反应实现固化,并成形饱和的碳硅Si—C(sp3)网络结构。固化成型的芳构网络和Si—C(sp3)网络结构分别赋予了PAR和PMR树脂固化物良好的热稳定性能,它们的热分解温度T_d5均大于600 ℃,900 ℃残重率均达到85%以上。     

Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) elastomer via photo-initiated graft polymerization of poly(ethylene glycol)

Poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) copolymer biomedical elastomer was covalently grafted with poly(ethylene glycol) methyl ether methacrylate (PEGMA) via a photo-initiated graft polymerization technique. The surface graft polymerization of SEBS with PEGMA was verified by ATR-FTIR and XPS. Effect of graft polymerization parameters, i.e., monomer concentration, UV irradiation time and initiator concentration on the grafting density was investigated. Comparing with the virgin SEBS film, the PEGMA-modified SEBS film presented an enhanced wettability and a larger surface energy. Besides, the surface grafting of PEGMA imparted excellent anti-platelet adhesion and anti-protein adsorption to the SEBS surface.     

Surface modification of hydroxyapatite with poly(methyl methacrylate) via surface-initiated ATRP

This article describes the fabrication of hydroxyapatite (HAP) nanocomposites grafted with poly(methyl methacrylate) (PMMA). Surface-initiated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was carried out from hydroxyapatite particles derivatized with ATRP initiators. The structure and properties of the nanocomposites were investigated by thermogravimetric analysis (TGA), transmission electron microscopy (TEM), differential scanning calorimeter (DSC) measurements, and contact angle analyses. TGA was used to estimate the grafting density of ATRP initiators (0.49 initiator/nm²) and the amount of grafted PMMA on the HAP surface. The contact angle analyses indicated that grafting PMMA onto the HAP surface dramatically increased the hydrophobicity of the surface. Moreover, the HAP nanocomposites showed excellent dispersibility in both aqueous solution and organic solvent.     

Microstructure,Rheology, and Potential Oil Absorbency of Poly(Butyl Methacrylate) and Poly(Hydroxyethyl Methacrylate) Blends

To prepare oil-absorptive polymers with moderate cross-linking structure, poly(butyl methacrylate) (PBMA) was synthesized as a linear hydrophobic polymer by suspension polymerization. In addition, hydroxyethyl methacrylate (HEMA), as a monomer, which could construct a network structure among the macromolecules via hydrogen bond interactions, was solution polymerized in dimethylacetamide (DMAc) with PBMA, yielding a polymer blend of PBMA and PHEMA. The solution of the polymer blend was investigated by rotational viscometry and extended rheometry. The results showed that the viscosity varied greatly with the temperature and shear rate for three different compositions. Fourier transform infrared (FTIR) spectra indicated that an entanglement or interlocking cross-linking structure of molecular chains was constructed by hydrogen bonds. The results from nuclear magnetic resonance (NMR) spectra exhibited a downfield movement of the proton peak as influenced by end groups or hydroxyls in the polymer chains. The rheological measurements demonstrated that the cross-linking structure greatly affected the rheological behavior of the blend solution. In addition, the cross-linking structure was also evaluated by oil absorbency of films.     

Kinetics of sono-photooxidative degradation of poly(alkyl methacrylate)s

The mechano-chemical degradation of poly(methyl methacrylate) (PMMA), poly(ethyl methacrylate) (PEMA) and poly(n-butyl methacrylate) (PBMA) using ultrasound (US), ultraviolet (UV) radiation and a photoinitiator (benzoin) has been investigated. The degradation of the polymers was monitored using the reduction in number average molecular weight (M(n)) and polydispersity (PDI). A degradation mechanism that included the decomposition of the initiator, generation of polymer radicals by the hydrogen abstraction of initiator radicals, reversible chain transfer between stable polymer and polymer radicals was proposed. The mechanism assumed mid-point chain scission due to US and random scission due to UV radiation. A series of experiments with different initial M(n) of the polymers were performed and the results indicated that, irrespective of the initial PDI, the PDI during the sono-photooxidative degradation evolved to a steady state value of 1.6±0.05 for all the polymers. This steady state evolution of PDI was successfully predicted by the continuous distribution kinetics model. The rate coefficients of polymer scission due to US and UV exhibited a linear increase and decrease with the size of the alkyl group of the poly(alkyl methacrylate)s, respectively.     

Increase of photoluminescence from fullerenes-doped poly (alkyl methacrylate) under laser irradiation

Increase of photoluminescence (PL) from fullerenes (C₆₀ and C₇₀)-doped poly(alkyl methacrylate), such as poly(ethyl methacrylate) (PEMA), poly(isopropyl methacrylate) (PiPMA) and poly(isobutyl methacrylate) (PiBMA), have been studied under laser irradiation with wavelength of in air. After laser irradiation, PL peaks of all fullerenes doped-polymers are broadened and blue-shifted. This PL increase depends on the fullerene concentrations. By comparing with fullerenes-doped PMMA, fullerenes-doped PEMA have the greatest PL increase among the four kinds of polymers, including PEMA, PiPMA, PiBMA and PMMA. PL intensity of C₇₀-doped polymers increases much more quickly than the corresponded C₆₀-doped polymers at the initial stage of laser irradiation. Great change on their UV-visible absorption spectra before and after laser irradiation indicate some great variation on chemical structure of fullerene molecules dispersed in polymer matrix under laser irradiation. This great PL increase may be attributed to formation of fullerene oxide-polymer and oxidized fullerene-polymer adducts due to laser-induced photochemical reactions among fullerene, oxygen and polymer.     

Effect of PMMA on crystallization behavior and hydrophilicity of poly(vinylidene fluoride)/poly(methyl methacrylate) blend prepared in semi-dilute solutions

Films of poly(vinylidene fluoride) (PVDF)/poly(methyl methacrylate) (PMMA) blend were derived from a special procedure of casting semi-dilute solutions. Hydrophilic character and crystallization of PVDF were optimized by variation of PMMA concentration in PVDF/PMMA blends. It was found that a PVDF/PMMA blend containing 70 wt% PMMA has a good performance for the potential application of hydrophilic membranes via thermally induced phase separation. The films presented β crystalline phase regardless of PMMA content existed in the blends. Thermal analysis of the blends showed a promotion of crystallization of PVDF with small addition of PMMA which induced larger lamellar thickness of PVDF, leading to the largest spherulitic crystal of PVDF (10 wt% PMMA) is about 8 μm. SEM micrographs illustrated no phase separation occurred in blends, due to the high compatibility between PVDF and PMMA.     

Kinetics of the ultrasonic degradation of poly (alkyl methacrylates)

The influence of the alkyl group substituents on the ultrasonic degradation of poly (alkyl methacrylate)s, namely poly (methyl methacrylate) (PMMA), poly (ethyl methacrylate) (PEMA) and poly (butyl methacrylate) (PBMA) was studied. The rate coefficient increased with an increase in the number of carbon atoms in the alkyl group: thus the order of degradation was PBMA>PEMA>PMMA. This was attributed to the scission of the main chain, which increases with the length of the side chain. The ultrasonic degradation of PBMA was investigated in various solvents, at different temperatures and at different ultrasound intensities. The degradation rate coefficients increased logarithmically with the decrease in vapor pressure and increased linearly with an increase in viscosity of the solvent and ultrasound intensity. The effect of three different initiators, benzoyl peroxide (BPO), dicumyl peroxide (DCP) and azo-bisisobutyronitrile (AIBN) on the ultrasonic degradation of PBMA was also studied. The degradation of the polymer decreased in the presence of the initiator. A continuous distribution model was developed for the radical mechanism involved in degradation and was used to determine the degradation rate coefficients of PBMA in presence of initiator. The model indicated that the degradation rate coefficient of the interaction of the PBMA radical with the initiator is independent of the dissociation constant of the initiator.     

Preparation and characterization of poly(lactic acid)/poly(methyl methacrylate) blend tablets for application in quantitative analysis by micro Raman spectroscopy

Poly(lactic acid) (PLA) is a biodegradable polymer that has a variety of applications, one of which is as biomaterial in surgery or as functional layers on implants, due to its compatibility with living tissue. This paper reports the possibilities of quantification of poly(lactic acid) (PLA) in a polymer matrix such as poly(methyl methacrylate) (PMMA) by micro Raman spectroscopy (MRS). Blends of amorphous poly(DL‐lactic acid) with poly(methyl methacrylate) were prepared by the procedure of dissolution/precipitation. Thermal properties of the blends such as the glass transition temperature (Tg) were characterized by differential scanning calorimetry (DSC). The PLA/PMMA blends exhibited only a single glass transition region, indicating that this system is miscible. The PLA/PMMA system obeys the Gordon–Taylor equation (Tg versus PLA content). Various concentration ratios of PLA blends were prepared to use as a basis for quantitative analysis by MRS. Intensities of the characteristic bands at 813 cm⁻¹ (νCOC of PMMA) and 873 cm⁻¹ (νC―COO of PLA) were used for the calculation. The calibration graph showed a good linear correlation with an R² value of 0.9985. On the basis of the calibration curve obtained, the determined content of several PLA/PMMA blends was in good agreement when compared with nominal contents. The limit of detection (LOD) and quantification (LOQ) were calculated by the calibration data set as signal‐to‐noise method. The relative standard deviation of this method was lower than 10% and the accuracy better than 4%. This study demonstrated that Raman spectroscopy provides an alternative non destructive method for quantitative analysis of PLA in a PMMA matrix. Copyright © 2015 John Wiley & Sons, Ltd.     

The influence of UV-irradiation and support type on surface properties of poly(methyl methacrylate) thin films

Thin poly(methyl methacrylate) (PMMA) films were prepared by a solution casting on different supports (glass and aluminium plates with different gloss). UV-irradiation (λ = 254 nm) was used for polymer modification. Surface properties of PMMA were studied by contact angle measurements, attenuated total reflection infrared spectroscopy and optical microscopy. It was found that support type has no influence on surface properties of virgin PMMA, however, the changes in these properties were observed during UV modification of polymer film. The most efficient photochemical reactions appeared in sample placed on the rough Al, whereas the smallest effect was observed in polymer on the glass.