Cr/O2/Ar体系反应机理的量子化学研究

本文用量子化学从头计算法研究了Cr/O2/Ar气相体系所发生的两个反应的机理.在MP2/SDD水平上优化了反应物、过渡态、中间体和产物的几何构型.在同一水平上计算了能量,同时进行零点能校正,并且计算出反应的热效应、熵变、活化能和绝对速率常数,并与文献数据进行了比较.计算结果与文献数据比较吻合,表明量子化学计算是研究铬等痕量元素气相反应机理和计算热力学及动力学参数的一种有效手段.     

煤燃烧中汞与含氯气体的反应机理研究

预测汞的排放及其形态必须了解燃煤烟气中汞的化学反应机理。本文用量子化学从头计算研究了煤燃烧过程中汞与含氯气体的反应机理,优化得到反应物、过渡态、中间体和产物的几何构型,并计算活化能和反应热效应。采用经典过渡态理论计算反应速率常数,并与文献数据进行比较,结果比较吻合,表明量子化学是研究汞等痕量元素与气体反应的机理和动力学、热力学参数的一种有效手段。     

CH2 CHF与臭氧反应机理的量子化学研究

用量子化学MP2方法 ,在 6 311++G(d ,p)基组水平上研究了烯烃CH2 CHF与臭氧反应的机理 ,对氟代乙烯臭氧化反应Criegee机理进行了系统的计算 ,全参数优化了反应过程中反应物、中间体、过渡态和产物的几何构型 ,在QCISD(T) / 6 311++G(d ,p)水平上计算了它们的能量 .并对它们进行了频率分析 ,以确定中间体和过渡态的真实性 .研究结果表明 ,氟代乙烯与臭氧反应沿Criegee机理是可信的、合理的 .同时研究还发现 ,就氟代乙烯与臭氧反应活性而言 ,其控制步骤的位垒较低 ,可以说氟代乙烯与臭氧反应活性较强 ,也就是说氟代乙烯对臭氧的损耗较大 .     

煤燃烧中HgCl转化为HgCl_2的反应机理研究

本文用量子化学从头计算MP2/SDD方法研究了煤燃烧过程中间产物HgCl与HCl、Cl2的反应机理,优化得到反应途径上的反应物、过渡态、中间体和产物的几何构型。用QCISD(T)方法计算能量,同时进行零点能校正,并以此能量计算活化能,同时计算反应热效应及熵变,采用经典过渡态理论得到反应速率常数。计算所得的反应速率常数与文献值吻合较好。     

三种磺酰脲类除草剂水解反应机理的理论研究

采用量子化学从头算方法在HF/6-31G(d)水平上对氯磺隆、甲嘧磺隆和氟嘧磺隆三种典型的磺酰脲类除草剂在酸性和中性条件下水解反应的机理进行理论研究,分别优化了各反应途径中反应物、过渡态、中间体以及产物的几何构型,并通过振动分析确定反应的过渡态和中间体的真实性。同时,在B3LYP/6-31G(d)水平上计算各驻点的单点能,以及溶剂效应对水解反应的影响。从能量上看,酸性条件更有利于水解反应的进行,与实验结果较为吻合.     

含铬废物焚烧中CrOH+H→CrO+H2反应机理研究

本文用量子化学密度泛函UB3LYP方法,在6-311 G**基组水平上研究了含铬固体废物焚烧过程中CrOH H→CrO H2的微观反应机理。在相同理论水平上用内禀反应坐标理论(IRC)对最小能量途径进行计算,并进行了详细的讨论。分别计算了正、逆反应的活化能。采用经典过渡态理论计算了正、逆反应的反应速率常数。     

2-氨基吡啶气相氟化取代反应的密度泛函理论研究

采用量子化学方法,运用密度泛函理论(DFT)B3LYP方法,在6-311G*基组水平上,以2-氨基吡啶为起始反应物,全优化计算了亚硝酰阳离子NO+对2-氨基吡啶中氨基进攻的重氮化反应及氟硼酸根阴离子BF4-对吡啶重氮正离子进攻的席曼反应的机理,搜索到整个反应过程中的过渡态结构,得到了反应路径并通过IRC验证,并对各反应中间体、过渡态和产物进行分子几何构型优化、振动频率分析和标准热力学函数计算．通过计算,搜索到的过渡态均为环状结构,与配位插入反应类似,利于原子间化学键的断裂及新键的形成;通过热力学及动力学计算,重氮化-席曼反应是剧烈的放热反应,与实验结果相吻合．     

2-氨基吡啶气相氟代反应的密度泛函理论研究

采用量子化学方法,运用密度泛函理论(DFT)B3LYP方法,在6-311G*基组水平上,以2-氨基吡啶为起始反应物,全优化计算了亚硝酰阳离子NO~+对2-氨基吡啶中氨基进攻的重氮化反应及氟硼酸根阴离子BF_4~-对吡啶重氮正离子进攻的席曼反应的机理,搜索到整个反应过程中的过渡态结构,得到了反应路径并通过IRC验证,并对各反应中间体、过渡态和产物进行分子几何构型优化、振动频率分析和标准热力学函数计算.通过计算,搜索到的过渡态均为环状结构,与配位插入反应类似,利于原子间化学键的断裂及新键的形成;通过热力学及动力学计算,重氮化-席曼反应是剧烈的放热反应,与实验结果相吻合.     

NH自由基与臭氧反应机理的理论研究

用量子化学从头计算方法,在HF／6－31＋＋G**水平研究了臭氧与NH三线态活性自由基反应的微观机理,优化得到反应物、过渡态、中间体和产物的几何构型。用MP2／6－31＋＋G**／／HF6－31＋＋G**方法计算能量,同时进行零点能校正。研究结果表明： NH三线态活性自由基与O3反应首先成稳定中间体NHO3,然后中裂解生成HNO和O2。     

煤燃烧中汞与氟化氢的反应机理研究

应用量子化学理论的不同方法和基组分别计算汞/氟体系中分子的几何结构、振动频率和反应焓变,并与美国国家标准技术局的实验数据相比较,以验证量子化学计算所用的理论水平和基组的有效性。在此基础上,应用量子化学从头计算研究了煤燃烧过程中汞与氟化氢的反应机理,优化得到反应物、过渡态和产物的几何构型,计算活化能,应用过渡态理论计算反应速率常数。计算得到的有关动力学参数为深入研究煤燃烧过程中汞的动力学模型提供了依据。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.