SSZ-13分子筛上甲醇转化过程中甲氧基物种的生成与活性研究

本文使用固体核磁共振（NMR）技术研究了SSZ-13分子筛上甲醇制烯烃反应过程中表面甲氧基物种的生成以及反应活性.通过二维¹³C-²⁷Al HMQC NMR方法确证了甲醇在分子筛骨架Brønsted酸位上生成的甲氧基物种,以及在Lewis酸位上生成的另外一种表面甲氧基物种.¹³C NMR结合气相色谱-质谱（GC-MS）实验结果表明,这两种甲氧基物种在甲醇制烯烃反应中均具有较高的反应活性,既可以导致烃池物种的生成,也可以参与烃池反应生成碳氢化合物.     

蚕丝蛋白的NMR研究Ⅱ.桑、柞蚕丝及其丝素的13C CP-MAS NMR研究

本文在Bruker AC-250和MSL-400谱仪上,首次测试了河南桑蚕茧、丝素及柞蚕黄茧、人工白茧和丝素的固态¹³C CP MAS NMR谱,归属了¹³C NMR谱线,并揭示了白茧和黄茧二级结构的差异。     

核磁共振技术在生物质转化中的应用

生物质结构的精确分析研究有利于其各个组分的转化利用,而核磁共振（NMR）技术是生物质解聚及结构演变分析中重要的表征技术.本文主要介绍了¹H NMR、¹³C NMR、³¹P NMR和2D HSQC四种NMR技术在生物质结构、产物定性和定量分析、反应路径和催化解聚机理探究中的应用,然后讨论了NMR技术应用于生物质研究中存在的主要问题,并进行了展望.     

几种N-取代马来酰胺酸辅酶模型的核磁共振研究

我们对8种N-取代马来酰胺酸辅酶模型与不同类型的亲核试剂反应后生成的产物进行了¹H、¹³C NMR的研究, 测得¹H、¹³C谱化学位移,研 究探讨其规律性, 并测试了IR谱和元素分析.     

抗冲聚丙烯微结构的研究

利用¹³C NMR对抗冲聚丙烯的微结构进行了研究.结果表明,由于抗冲聚丙烯聚合工艺的差别,4个抗冲聚丙烯样品中的乙烯链段的序列分布也不同.根据抗冲聚丙烯的¹³C NMR谱,计算出了丙烯段的次甲基和甲基的峰强度,由此建立了表征抗冲聚丙烯共聚物中丙烯链段的立构规整度的方法.     

HR/MAS高分辨魔角微量探头用于天然橡胶固体1H、13C NMR测试及其与液体BBO探头、固体CP/MAS探头测试的比较

采用BRUKER高分辨魔角微量探头（HR/MAS），液相宽带BBO探头和固体CP/MAS探头，对天然橡胶固体、乳液以及天然橡胶溶于氘代苯的溶液进行了¹H、¹³C 1D和2D NMR谱的测试和比较. 发现HR/MAS探头用于天然橡胶固体和乳液时可以得到高分辨的¹H、¹³C谱，克服了CP/MAS探头测试固体¹³C NMR谱或者是固体¹H NMR谱时，谱图存在S/N值可能较小、谱峰可能宽化的弱点.     

糖与氨基酸反应产物结构的EPR和13C NMR研究

应用EPR和¹³C NMR技术系统地研究了糖与氨基酸反应的产物。EPR波谱分析表明,反应产物的结构主要取决于氨基酸的结构。¹³C NMR波谱的化学位移表明、反应产物的结构应该是2,5-哌嗪二酮,糖是作为1,4位取代的配位基。本文还提出了一种可能的反应机制。     

黄酮类天然产物13C NMR数据的计算机检索和辅助解析(Ⅱ)黄酮类天然产物的13C NMR数据规律及其在智能解析中的应用

本文通过对大量的黄酮类化合物¹³C NMR图谱的分析和研究,总结了不同类型的黄酮类化合物的¹³C NMR图谱特征及化学位移规律.对影响黄酮类化合物结构骨架上不同位置碳原子化学位移的因素进行了分析,建立了用于黄酮类天然产物¹³C NMR图谱智能解析的知识库.     

无规立构聚乙烯醇缩酮环结构13C NMR研究

报道了无规立构聚乙烯醇与丙酮、丁酮缩酮化产物的¹³C NMR研究结果,发现丙酮的产物(PVKA)主要生成六元环.而丁酮产物(PVKB)除六元环外还有八元、十元环存在,且这3种环上的CH₃均是以轴立式构象为主.由¹³C NMR求得PVKB中相应的3种环的比例分别为36.3%,14.4%,5.8%.反应的平衡常数分别为1.8×10^-2、2.03×10^-3、2.8×10^-4,并讨论了它们对结晶等性能的影响.     

硫酸交联壳聚糖湿膜的13C CP MAS NMR研究

首次采用¹³C CP MAS NMR技术对接近膜分离状态时的湿膜进行研究.结果表明:温膜的分子构象和分子运动能较全面地反映出膜的分离特性,弱的交联以及过快或过慢的分子运动均不利于膜的分离.     

镜煤吡啶不溶物及其热解加氢产物的NMR研究

本文对镜煤吡啶不溶物、热解加氢后吡啶及四氢呋喃不溶物进行了固体NMR研究,获得了12种结构参数,并对热解加氢产物中的苯可溶各馏份进行了一维、二维液体NMR研究,归属了其¹³C和¹H谱,计算了各馏份的平均分子结构.     

Stationary interphases with extended alkyl chains: A comparative study on chain order by solid-state NMR spectroscopy

Stationary interphases with long n-alkyl chains (n = 18, 22, 30, 34) have been examined by solid-state NMR spectroscopy. The determination of the silane functionality and the degree of cross-linking of silane ligands on the silica surface was performed by ²⁹Si CP/MAS NMR spectroscopy. High-speed ¹H MAS and ¹³C CP/MAS NMR spectroscopy were utilized to assess alkyl chain order and mobility of the different bonded phases. For this purpose, ¹H NMR line widths and ¹³C chemical shifts have been evaluated. It is shown that stationary phase order and rigidity increase with alkyl chain length. In addition, the temperature-dependent trans/gauche conformational change occurs at higher temperatures for a polymeric C₃₄ phase compared with a C₃₀ sorbent. This behaviour is discussed in the context of previously reported Chromatographic (HPLC) shape selectivity differences.     

NMR study of solid C60(γ-cyclodextrin)2

A solid complex of C₆₀ with γ-cyclodextrin (γ-CyD) was examined with NMR spectroscopic methods in order to understand the dynamics of C₆₀, and the interaction between C₆₀ and γ-CyD. A ¹³C solid-state cross-polarization magic angle spinning (CP/MAS) NMR spectra shows C₆₀ resonance at 142.6 ppm. This provides the evidence of interaction between ¹³C spins in C₆₀ and ¹H spins in the γ-CyD host. Ambient temperature experiments on the ¹³C CP/MAS NMR, with varying contact time, shows that the water associated with γ-CyDs plays an important role in the nuclear relaxation processes. The dynamics of C₆₀ in γ-CyD was investigated using temperature and field-dependent ¹³C spin-lattice relaxation time measurements. The influence of water on the dynamics of C₆₀ was less significant below 250 K.     

Solid-state 13C and 1H spin diffusion NMR analyses of the microfibril structure for bacterial cellulose

To obtain further information about the cause for the rather large splitting of the C4 resonance line into the downfield (C4D) and upfield (C4U) lines in CP/MAS ¹³C NMR spectra for native cellulose, ¹³C and ¹H spin diffusion measurements have been conducted by using different types of bacterial cellulose samples. In ¹³C spin diffusion measurements, the C4D resonance line is selectively inverted by the Dante π pulse sequence and the ¹³C spin diffusion is allowed to proceed from the C4D carbons to other carbons including the C4U carbons with use of the ¹³C4-enriched bacterial cellulose sample. The analysis based on the simple spin diffusion theory for the process experimentally observed reveals that the C4U carbons may be located at distances less than about 1 nm from the C4D carbons. In ¹H spin diffusion measurements, poly(vinyl alcohol) (PVA) films in which ribbon assemblies of bacterial cellulose are dispersed are employed and the ¹H spin diffusion process is examined from the water-swollen PVA continuous phase to the dispersed ribbon assemblies by the ¹³C detection through the ¹H–¹³C CP technique. As a result, it is found that the C4D and C4U carbons are almost equally subjected to the ¹H spin diffusion from the PVA phase, indicating that the C4U carbons are not localized in some limited area, e.g. in the surfacial region, but are distributed in the whole area in the microfibrils. These experimental results suggest that the C4U carbons may exist as structural defects probably due to conformational irregularity associated with disordered hydrogen bonding of the CH₂OH groups in the microfibrils.     

取代基效应(SCS)与乙烯-α-烯烃共聚物的序列结构——7.氢化丁苯共聚物(HBS)

测定了两个氢化丁苯共聚物样品的¹H、¹³C NMR谱。通过处理文献中的¹³C NMR谱数据得到了-C₂H₅和-C₆H₅的SCS参数。利用乙烯-α-烯烃共聚物的SCS方法结合DEPT NMR实验技术重新归属了该共聚物的¹³C NMR谱。明确指出,氢化丁苯共聚物分子链中主链任何一个乙烯单元的两个CH₂在序列分布上分属于二元组和三元组。CH则用三元组来表征。最后,对HBS共聚物的序列分布进行了计算。     

晶化时间及硅源对SAPO-5分子筛的结构及模板剂状态的影响

通过改变硅源和晶化时间的方法,采用水热法合成了系列SAPO-5分子筛材料,用X光衍射(XRD)和²⁷Al MAS NMR对产物的晶相结构进行表征,用¹³C CP MAS NMR研究了不同阶段的产物中模板剂的存在状态。结果可见:以SiO₂凝胶为硅源时;薄水铝石反应物有较高的活性,在48h的晶化时间内,延长晶化时间有助于SAPO-5分子筛的完整结晶,当晶化时间超过48h时,其中已形成的SAPO-5的结构部分被破坏,并转化为SAPO-34.且SAPO-34的量随晶化时间的延长而增多。当以Si(OEt)₄为硅源时,铝反应物的反应活性较低,在72h的晶化时间范围内,延长晶化时间有助于SAPO-5产物的形成,使其结构愈加完整,在SAPO-5分子筛的形成过程中,模板剂的状态随分子筛结构的变化而变化,由于三乙胺(Et₃N)模板剂中的甲基和亚甲基所处位置不同,其弛豫时间受分子筛结构的影响较大,可用其中甲基的¹³C MAS NMR诺线的强度及化学位移来表示分子筛结构的完整性。     

Potassium tetracyanoplatinate (II) trihydrate (K2Pt(CN)4·3H2O) studied by high resolution solid state C MAS NMR

Prudent analysis of the solid state ¹³C MAS NMR spectra of polycrystalline K₂Pt(CN)₄ · 3H₂O (KTCP)⁻ reveals that in crystals of this compound there are two types of carbon nuclei with slightly different ¹³C chemical shift tensors, contrary to what is found for the solution NMR spectrum and previous static powder NMR studies on this compound and the high resolution solid state NMR studies on other similar compounds. The ¹³C MAS spectra measured at different rotor spinning speeds are satisfactorily simulated though the use of a newly developed computer program based on a novel density matrix formulation. The present method is eminently successful even though the spectra are rather complicated because of (1) the relatively large anisotropies of the chemical shift tensors; (2) the high-order dipolar interactions between ¹³C and ¹⁴N nuclei because of the strong quadrupolar coupling constants of ¹⁴N nuclei; and (3) the indirect J-coupling between the ¹³C and ¹⁹⁵Pt. The principal elements as well as their orientations of the two ¹³C chemical shift tensors are evaluated from the spectral simulations.     

The surface structure of catalysts activated with hydrogen donors as elucidated by multinuclear solid-state NMR

¹H, ²⁷Al and ³¹P MAS, and ¹³C and ²⁹Si CP/MAS NMR spectroscopies, were used to characterize catalysts of Pd supported on various solids including SiO₂, AlPO₄ and Mg₃(PO₄)₂ that were activated with the chiral hydrogen-donor limonene. The above-mentioned techniques were used to check for the formation of an organopalladium complex between Pd²⁺ atoms and the olefin bonds in the limonene molecule on the catalyst surface. The results are compared with those obtained for catalysts activated in a hydrogen stream.     

蒽加氢产物的结构指认和定量核磁共振分析

本文利用多种液体核磁共振（NMR）技术,综合分析了在三个不同反应条件下蒽催化加氢反应获得的产物混合物.利用二维扩散排序谱（DOSY）和一维选择性激发谱（selTOCSY）确定了产物中含有的二氢蒽、四氢蒽、对称八氢蒽和非对称八氢蒽;利用¹H NMR、¹³C NMR、DEPT135、¹H-¹H COSY、¹H-¹³C HSQC实验对二氢蒽、四氢蒽和对称八氢蒽的¹H和¹³C NMR信号进行了详细归属;利用定量核磁共振氢谱（QNMR）计算得到了蒽的转化率和产物的选择性.本研究可用于指导优化催化反应条件,提高产物对称八氢蒽的选择性,同时为稠环类芳烃催化加氢产物的分析提供系统的NMR技术方案.