空化泡液体外围压强的分布

本文从空化泡动力学理论出发,分别讨论了空化泡在压缩和膨胀时液体中的压强分布情况,并作了数值模拟。研究结果表明,空化泡在膨胀和压缩时其外围压强分布明显不同,不能将其一并而论。发现当空化泡的半径增大时液体的压强在不断变化,压强是先变小后变大。而且这个压强的变化还与待测点距空化泡的距离有关。当空化泡的半径在不断变小时外界的压强在不断增大,当空化泡刚开始压缩时液体中的压强变化情况不是很明显,但当空化泡的半径变到1μm时,空化泡外界压强出现明显变化。当空化泡压缩到较小时,此时再增加外界压强空化泡的半径也不会在有很大的变化。     

Liquid jet directionality and droplet behavior during emulsification of two liquids due to acoustic cavitation

The present study numerically investigates liquid-jet characteristics of acoustic cavitation during emulsification in water/gallium/air and water/silicone oil/air systems. It is found that a high-speed liquid jet is generated when acoustic cavitation occurs near a minute droplet of one liquid in another. The velocity of liquid jet significantly depends on the ultrasonic pressure monotonically increasing as the pressure amplitude increases. Also, the initial distance between cavitation bubble and liquid droplet affects the jet velocity significantly. The results revealed that the velocity takes maximum values when the initial distance between the droplet and cavitation bubble is moderate. Surprisingly, the liquid jet direction was found to depend on the droplet properties. Specifically, the direction of liquid jet is toward the droplet in the case of water/gallium/air system, and vice versa the jet is directed from the droplet in the case of water/silicone oil/air system. The jet directionality can be explained by location of the high-pressure spot generated during the bubble contraction.     

声场中双空化泡的运动特性

空化泡的运动特性是声场作用下的动力学行为,受空化泡初始半径,声压幅值,驱动声压频率,液体特性等众多因素的影响,是个复杂工程。本文从双空化泡运动方程出发,考虑到液体粘滞系数、空化泡辐射阻尼项的影响,研究了不同初始半径、驱动声压频率、驱动声压幅值、液体粘滞系数下空化泡泡壁的运动情况,研究结果表明不同初始半径、外界驱动声压频率、驱动声压幅值、液体粘滞系数均会对空化泡的膨胀比和空化泡的溃灭时间有一定影响。     

声场中水力空化泡的动力学特性

以水为工作介质,考虑了液体黏性、表面张力、可压缩性及湍流作用等情况,对文丘里管反应器中空化泡在声场作用下的动力学行为特性进行了数值研究.分析了超声波频率、声压及喉径比对空化泡运动特性以及空化泡崩溃时所形成泡温以及压力脉冲的影响.结果表明,超声将水力空化泡运动调制成稳态空化,有利于增强空化效果. 关键词： 超声波 水力空化 湍流 气泡动力学     

Theoretical model of ice nucleation induced by inertial acoustic cavitation. Part 2: Number of ice nuclei generated by a single bubble

In the preceding paper (part 1), the pressure and temperature fields close to a bubble undergoing inertial acoustic cavitation were presented. It was shown that extremely high liquid water pressures but quite moderate temperatures were attained near the bubble wall just after the collapse providing the necessary conditions for ice nucleation. In this paper (part 2), the nucleation rate and the nuclei number generated by a single collapsing bubble were determined. The calculations were performed for different driving acoustic pressures, liquid ambient temperatures and bubble initial radius. An optimal acoustic pressure range and a nucleation temperature threshold as function of bubble radius were determined. The capability of moderate power ultrasound to trigger ice nucleation at low undercooling level and for a wide distribution of bubble sizes has thus been assessed on the theoretical ground.     

A study on the effect of ultrasound on electrochemical phenomena

We have employed microelectrodes in order to resolve single transient cavitation events. High time resolution studies of individual current time transients were shown. Distance and temperature dependencies proved to be in agreement with both the acoustic pressure field generated by the ultrasonic horn and cavitation bubble collapse violence with decreasing vapour pressure within the bubble, respectively. Measurements of electrode kinetics at the point of impact of the transient events were shown for the first time by the employment of sampled voltammetry.     

声驻波场中空化泡的动力学特性

以水为工作介质, 考虑了液体的可压缩性, 研究了驻波声场中空化泡的运动特性, 模拟了驻波场中各位置处空化泡的运动状态以及相关参数对各位置处空化泡在主Bjerknes力作用下运动方向的影响. 结果表明: 驻波声场中, 空化泡的运动状态分为三个区域, 即在声压波腹附近空化泡做稳态空化, 在偏离波腹处空化泡做瞬态空化, 在声压波节附近, 空化泡在主Bjerknes 力作用下, 一直向声压波节处移动, 显示不发生空化现象; 驻波场中声压幅值增加有利于空化的发生, 但声压幅值增加到一定上限时, 压力波腹区域将排斥空化泡, 并驱赶空化泡向压力波节移动, 不利于空化现象的发生; 当声频率小于初始空化泡的共振频率时, 声频率越高, 由于主Bjerknes 力的作用将有更多的空化泡向声压波节移动, 不利于空化的发生, 尤其是驻波场液面的高度不应是声波波长的1/4; 当声频率一定时, 空化泡初始半径越大越有利于空化现象的发生, 但当空化泡的初始半径超过声频率的共振半径时, 由于主Bjerknes力的作用将有更多的空化泡向声压波节移动, 不利于空化的发生.     

亚临界水中超声激励空化泡动力学分析

考察亚临界水中压力和温度对超声空化泡动力学的影响。应用非线性Rayleigh-Plesset方程模拟空化泡运动过程,并利用Matlab软件编程求数值解,用碘量法测定超声在亚临界水中的声空化产额。结果表明:当亚临界水的压力相似文献   

Luminescence induced by spherically focused acoustic pulses in liquids

The determination of the phase of the bubble oscillation at the instant of light emission, which is a key issue for understanding the origin of cavitation luminescence of liquids, is discussed. The observation of luminescence in the course of the nucleation and growth of a bubble up to its collapse is performed in a bipolar wave consisting of a compression phase followed by a rarefaction phase in the regime of a two-fraction bubble cluster formation. The space-time distributions of the luminescence intensity and pressure and the dynamics of the cluster in water and a glycerin solution are investigated at the early stage of cavitation. A correlation between the maximal density of light flashes and the positive pressure pulses in the field of superposition of the initial and secondary cavitation compression waves is revealed. It is shown that the spherical focusing of acoustic pulses both away from the boundaries of the liquid and near its free surface makes it possible to compare the luminescence intensities for different rates of the pressure decrease.     

Dynamics of a cavitation bubble near a solid wall

The cavitation bubble dynamics, the variation of pressure and velocity fields of the surrounding liquid in the process of the bubble axisymmetric compression near a planar solid wall are considered. It is assumed that the liquid is at rest at the initial moment of time, and the bubble has a spheroidal shape. The liquid is assumed inviscid and incompressible, its motion being potential. The bubble surface deformation and the liquid velocity on the surface are computed by the Euler scheme using the boundary element method until the moment of the collision of some parts of the bubble surface with one another. The influence of the distance of the bubble from the wall and its initial nonsphericity on the liquid pressure and velocity fields, the bubble shape, and the pressure inside the bubble at the end of the time interval under consideration are studied. The maximum pressure in liquid is shown to realize at the bottom of the cumulative jet arising at the bubble collapse with direction to the wall. In the upper part of this jet, the velocity and pressure are practically constant, and the pressure in the jet is approximately equal to the pressure in the bubble.     

导电流体中气泡径向振动行为的磁场控制

液态金属中气泡行为是磁流体力学的重要方面。为对磁场条件下导电流体中气泡动力学行为作全面理解,基于磁流体动力学方法建立了磁场条件下导电流体中气泡径向振动的无量纲化动力学方程,数值研究了磁场对导电流体中气泡径向非线性振动稳定性、泡内温度、泡内气压及液体空化阈值的影响。结果显示:磁场增强了气泡非线性振动的稳定性,随着磁场增强且当作用在泡上的电磁力与惯性力数量级可比时,气泡运动为稳定的周期性振动;同时,磁场引起泡内温度、泡内压力及液体空化阈值变化。研究表明,可用磁场调节和控制液态金属中气泡的运动使其满足工程应用需求。      

A study of cavitation nucleation in pure water using molecular dynamics simulation

To discover the microscopic mechanism responsible for cavitation nucleation in pure water, nucleation processes in pure water are simulated using the molecular dynamics method. Cavitation nucleation is generated by uniformly stretching the system under isothermal conditions, and the formation and development of cavitation nuclei are simulated and discussed at the molecular level. The processes of energy, pressure, and density are analyzed, and the tensile strength of the pure water and the critical volume of the bubble nuclei are investigated. The results show that critical states exist in the process of cavitation nucleation. In the critical state, the energy, density, and pressure of the system change abruptly, and a stable cavitation nucleus is produced if the energy barrier is broken and the critical volume is exceeded. System pressure and water density are the key factors in the generation of cavitation nuclei. When the critical state is surpassed, the liquid is completely ruptured, and the volume of the cavitation nucleus rapidly increases to larger than 100 nm³; at this point, the surface tension of the bubble dominates the cavitation nucleus, instead of intermolecular forces. The negative critical pressure for bubble nucleation is -198.6 MPa, the corresponding critical volume is 13.84 nm³, and the nucleation rate is 2.42×10³² m^-3·^-1 in pure water at 300 K. Temperature has a significant effect on nucleation: as the temperature rises, nucleation thresholds decrease, and cavitation nucleation occurs earlier.     

曲面固壁附近空化泡溃灭动力学的 流体体积数值研究*

流体体积法(VOF)可以便捷、高效地实现对多相流界面的捕捉和追踪。本文基于VOF方法,对单个空化泡在曲面固壁附近的运动进行了数值模拟,从实验对比、压力场、速度场、温度场演化、溃灭时间、射流速度、固壁温度等方面分析了空化泡溃灭过程的热动力学影响。结果表明,数值模拟得到的空化泡形态演化与实验观测到的现象一致,随着位置参数、泡内外压差及曲面固壁尺寸的改变,空化泡热动力学行为也将发生变化,受到流体运动及射流冲击的影响,溃灭瞬间产生的高温高压使得曲面固壁温度升高。本文研究的曲面固壁附近空化泡溃灭效应,揭示了空化泡与曲面固壁间的相互作用规律,对学术研究及工程应用都具有重要意义。     

声场中气泡运动的混沌特性

以水为工作介质,考虑了液体的可压缩性,研究了声场中气泡的运动特性,模拟了声波频率、声压幅值、气泡初始半径以及液体的表面张力和黏滞系数的变化对气泡运动状态的影响. 分析了空化处理效果与气泡运动状态之间关系. 结果表明:气泡运动处于混沌状态,是提高声空化降解有机污染物能力的最重要因素. 关键词： 声空化 混沌 相图 功率谱图     

A two-dimensional nonlinear model for the generation of stable cavitation bubbles

Bubbles appear by acoustic cavitation in a liquid when rarefaction pressures attain a specific threshold value in a liquid. Once they are created, the stable cavitation bubbles oscillate nonlinearly and affect the ultrasonic field. Here we present a model developed for the study of bubble generation in a liquid contained in a two-dimensional cavity in which a standing ultrasonic field is established. The model considers dissipation and dispersion due to the bubbles. It also assumes that both the ultrasonic field and the bubble oscillations are nonlinear. The numerical experiments predict where the bubbles are generated from a population of nuclei distributed in the liquid and show how they affect the ultrasonic field.     

Ultrasonic cavitation at liquid/solid interface in a thin Ga–In liquid layer with free surface

Cavitation in thin layer of liquid metal has potential applications in chemical reaction, soldering, extraction, and therapeutic equipment. In this work, the cavitation characteristics and acoustic pressure of a thin liquid Ga–In alloy were studied by high speed photography, numerical simulation, and bubble dynamics calculation. A self-made ultrasonic system with a TC4 sonotrode, was operated at a frequency of 20 kHz and a max output power of 1000 W during the cavitation recording experiment. The pressure field characteristic inside the thin liquid layer and its influence on the intensity, types, dimensions, and life cycles of cavitation bubbles and on the cavitation evolution process against experimental parameters were systematically studied. The results showed that acoustic pressure inside the thin liquid layer presented alternating positive and negative characteristics within 1 acoustic period (T). Cavitation bubbles nucleated and grew during the negative-pressure stage and shrank and collapsed during the positive-pressure stage. A high bubble growth speed of 16.8 m/s was obtained and evidenced by bubble dynamics calculation. The maximum absolute pressure was obtained at the bottom of the thin liquid layer and resulted in the strongest cavitation. Cavitation was divided into violent and weak stages. The violent cavitation stage lasted several hundreds of acoustic periods and had higher bubble intensity than the weak cavitation stage. Cavitation cloud preferentially appeared during the violent cavitation stage and had a life of several acoustic periods. Tiny cavitation bubbles with life cycles shorter than 1 T dominated the cavitation field. High cavitation intensities were observed at high ultrasonication power and when Q235B alloy was used because such conditions lead to high amplitudes on the substrate and further high acoustic pressure inside the liquid.     

On the physical origin of conical bubble structure under an ultrasonic horn

The cavitation field generated by an ultrasonic horn at low frequency and high power is known to self-organize into a conical bubble structure. The physical mechanism at the origin of this bubble structure is investigated using numerical simulations and acoustic pressure measurements. The thin bubbly layer lying at horn surface is shown to act as a nonlinear thickness resonator that amplifies acoustic pressure and distorts acoustic waveform. This mechanism explains the self-stabilization of the conical bubble structure as well as the generation of shock wave and the focusing at very short distance.     

Some aspects of the design of sonochemical reactors

The magnitudes of collapse pressures and temperatures as well as the number of free radicals generated at the end of cavitation events are strongly dependent on the operating parameters of the equipment namely, intensity and frequency of irradiation along with the geometrical arrangement of the transducers and the liquid phase physicochemical properties, which affect the initial size of the nuclei and the nucleation process. In the present work, the effect of these parameters on the collapse pressure generated and the maximum size of the cavity during the cavitation phenomena have been studied using the bubble dynamics equation, which considers the compressibility of the medium and a single bubble in isolation. The different liquid phase properties considered include, liquid vapor pressure, viscosity, bulk liquid temperature, surface tension and nature of dissolved gases (polytropic constant of the gas). The theoretical predictions have been also compared with the experimental results observed in the literature qualitatively and some recommendations have been made for the selection of the operating parameters so as to achieve maximum benefits. The work presented here is novel in sense that no earlier studies have considered the compressibility of the liquid medium and tried to evaluate the effect of all the operating parameters on the cavitational activity.     

Numerical simulations of stable cavitation bubble generation and primary Bjerknes forces in a three-dimensional nonlinear phased array focused ultrasound field

We present a model developed for studying the generation of stable cavitation bubbles and their motion in a three-dimensional volume of liquid with axial symmetry under the effect of finite-amplitude phased array focused ultrasound. The density of bubbles per unit volume is determined by a nonlinear law which is a threshold-dependent function of the negative acoustic pressure reached in the liquid, in which nuclei are initially distributed. The nonlinear mutual interaction of ultrasound and bubble oscillations is modeled by a nonlinear coupled differential system formed by the wave and a Rayleigh-Plesset equations, for which both the pressure and the bubble oscillation variables are unknown. The system, which accounts for nonlinearity, dispersion, and attenuation due to the bubbles, is solved by numerical approximations. The nonlinear acoustic pressure field is then used to evaluate the primary Bjerknes force field and to predict the subsequent motion of bubbles. In order to illustrate the procedure, a medium-high and a low ultrasonic frequency configurations are assumed. Simulation results show where bubbles are generated, the nonlinear effects they have on ultrasound, and where they are relocated. Despite many physical restrictions and thanks to its particularities (two nonlinear coupled fields, bubble generation, bubble motion), the numerical model used in this work gives results that show qualitative coherence with data observed experimentally in the framework of stable cavitation and suggest their usefulness in some application contexts.     

Oscillation and Migration of Bubbles within Ultrasonic Field

The oscillation and migration of bubbles within an intensive ultrasonic field are important issues concerning acoustic cavitation in liquids.We establish a selection map of bubble oscillation mode related to initial bubble radius and driving sound pressure under 20 kHz ultrasound and analyze the individual-bubble migration induced by the combined effects of pressure gradient and acoustic streaming.Our results indicate that the pressure threshold of stable and transient cavitation decreases with the increasing initial bubble radius.At the pressure antinode,the Bjerknes force dominates the bubble migration, resulting in the large bubbles gathering toward antinode center,whereas small bubbles escape from antinode.By contrast,at the pressure node,the bubble migration is primarily controlled by acoustic streaming,which effectively weakens the bubble adhesion on the container walls,thereby enhancing the cavitation effect in the whole liquid.