Bidirectional reflectance distribution function modeling of one-dimensional rough surface in the microwave band

In this study, the bidirectional reflectance distribution function(BRDF) of a one-dimensional conducting rough surface and a dielectric rough surface are calculated with different frequencies and roughness values in the microwave band by using the method of moments, and the relationship between the bistatic scattering coefficient and the BRDF of a rough surface is expressed. From the theory of the parameters of the rough surface BRDF, the parameters of the BRDF are obtained using a genetic algorithm. The BRDF of a rough surface is calculated using the obtained parameter values. Further, the fitting values and theoretical calculations of the BRDF are compared, and the optimization results are in agreement with the theoretical calculation results. Finally, a reference for BRDF modeling of a Gaussian rough surface in the microwave band is provided by the proposed method.     

Bidirectional reflectance one-dimensional rough distribution function modeling of surface in the microwave band

In this study, the bidirectional reflectance distribution function （BRDF） of a one-dimensional conducting rough surface and a dielectric rough surface are calculated with different frequencies and roughness values in the microwave band by using the method of moments, and the relationship between the bistatic scattering coefficient and the BRDF of a rough surface is expressed. From the theory of the parameters of the rough surface BRDF, the parameters of the BRDF are obtained using a genetic algorithm. The BRDF of a rough surface is calculated using the obtained parameter values. Further, the fitting values and theoretical calculations of the BRDF are compared, and the optimization results are in agreement with the theoretical calculation results. Finally, a reference for BRDF modeling of a Gaussian rough surface in the microwave band is provided by the proposed method.     

A Novel Contactless Method for Characterization of Semiconductors：Surface Electron Bean Induced Voltage in Scanning Electron Microscopy

We present a novel contactless and nondestructive method called the surface electron beam induced voltage (SEBIV) method for characterizing semiconductor materials and devices.The SEBIV method is based on the detection of the surface potential induced by electron beams of scanning electron microscopy (SEM).The core part of the SEBIV detection set-up is a circular metal detector placed above the sample surface.The capacitance between the circular detector and whole surface of the sample is estimated to be about 0.64pf.It is large enough for the detection of the induced surface potential.The irradiation mode of electron beam (e-beam) influences the signal generation When the e-beam irradiates on the surface of semiconductors continuously,a differential signal is obtained.The real distribution of surface potentials can be obtained when a pulsed e-beam with a fixed frequency is used for irradiation and a lock-in amplifier is employed for detection.The polarity of induced potential depends on the structure of potential barriers and surface states of samples.The contrast of SEBIV images in SEM changes with irradiation time and e-beam intensity.     

Evaluating of Adhesion Property of ULSI Interconnect Films by the Surface Acoustic Waves

The technique of surface acoustic waves （SAWs） is a very promising method for determining film properties such as Young＇s modulus, density and film thickness nondestructively and accurately. The dispersion property of SAWs is also affected largely from the adhesion property of films, which is revealed by the bonding spring assumption described. This SAW method could offer a quantitative evaluation of the film adhesion from the curvature of SAW dispersion lines affected by the normal and shear spring constants. The method is applied to numerically characterize the adhesion property of the typical ultra-large-scale integrated circuit interconnect layered structure of a thin Cu film deposited on the Si substrate as well as a SiO2 thin film on a Si
substrate.     

Molecular dynamics study of the mechanical characteristics of Ni/Cu bilayer using nanoindentation

<正>In the present work,a three-dimensional molecular dynamics simulation is carried out to perform the nanoindentation experiment on Ni single crystal.The substrate indenter system is modeled using hybrid interatomic potentials including the many-body potential embedded atom method(EAM),and two-body morse potential.To simulate the indentation process,a spherical indenter(diameter = 80 A,1 A=0.1 nm) is chosen.The results show that the mechanical behaviour of a monolithic Ni is not affected by crystalline orientation.To elucidate the effect of a heterogeneous interface, three bilayer interface systems are constructed,namely Ni(100)/Cu(111),Ni(110)/Cu(111),and Ni(111)/Cu(111).The simulations along these systems clearly describe that mechanical behaviour directly depends on the lattice mismatch. The interface with the smaller mismatch between the specified crystal planes is proved to be harder and vice versa.To describe the relationship between film thickness and interface effect,we choose various values of film thickness ranging from 20 A to 50 A to perform the nanoindentation experiment.It is observed that the interface is significant only for the relatively small thickness of film and the separation between interface and the indenter tip.It is shown that with the increase in film thickness,the mechanical behaviour of the film shifts more toward that of monolithic material.     

Surface Morphology of GaAs/In0.3Ga0.7As in an Elastic Field of Static Point Defects

The surface morphology InGaAs layers with In composition of 0.3 on GaAs （001） substrates are simulated by the phase field method. We investigate the influence of the strain field induced by static point defects on surface morphology of the InGaAs thin film. Our simulation demonstrates that the rms roughness of the thin film surface is strongly dependent on the density and magnitude of the randomly distributed point defects. Point defects near the thin film surface can produce a relatively large change of the surface morphology. The influences of thin film thickness on the surface morphology with different defect distributions are illustrated in the simulations. Additionally, a combination of experiment and theory is used to examine the influence of the defect density and magnitude on the surface morphology and roughness.     

An iterative analytic–numerical method for scattering from a target buried beneath a rough surface

An efficiently iterative analytical-numerical method is proposed for two-dimensional （2D） electromagnetic scattering from a perfectly electric conducting （PEC） target buried under a dielectric rough surface. The basic idea is to employ the Kirchhoff approximation （KA） to accelerate the boundary integral method （BIM）. Below the rough surface, an iterative system is designed between the rough surface and the target. The KA is used to simulate the initial field on the rough surface based on the Fresnel theory, while the target is analyzed by the boundary integral method to obtain a precise result. The fields between the rough surface and the target can be linked by the boundary integral equations below the rough surface. The technique presented here is highly efficient in terms of computational memory, time, and versatility. Numerical simulations of two typical models are carried out to validate the method.     

Behaviour of Self-Standing CVD Diamond Film with Different Dominant Crystalline Surfaces in Thermal-Iron Plate Polishing

Self-standing CVD diamond films with different dominant crystalline surfaces are polished by the thermal-iron plate polishing method. The influence of the dominant crystalline surfaces on polishing etfficiency is investigated by measuring the removal rate and final roughness. The smallest rms roughness of 0.14 μm is measured with smallest removal rate in the films with the initial （220） dominant crystalline surface. Activation energy for the polishing is analysed by the Arrhenius relation. It is found that the values are 170kJ/mol, 222kJ/mol and 214kJ/mol for the film with three different dominant crystalline surfaces. Based on these values, the polishing cause is regarded as the graphitization-controlling process. In the experiment, we find that transformation of the dominant crystalline surfaces from （111） to （220） always appears in the polishing process when we polish the （111） dominant surface.     

Investigation on electromagnetic scattering from rough soil surface of layered medium using the small perturbation method

Electromagnetic scattering from a rough surface of layered medium is investigated, and the formulae of the scattering coefficients for different polarizations are derived using the small perturbation method. A rough surface with exponential correlation function is presented for describing a rough soil surface of layered medium, the formula of its scattering coefficient is derived by considering the spectrum of the rough surface with exponential correlation function; the curves of the bistatic scattering coefficient of HH polarization with variation of the scattering angle are obtained by numerical calculation. The influence of the permittivity of layered medium, the mean layer thickness of intermediate medium, the roughness surface parameters and the frequency of the incident wave on the blstatic scattering coefficient is discussed. Numerical results show that the influence of the permittivity of layered medium, the mean layer thickness of intermediate medium, the rms and the correlation length of the rough surface, and the frequency of the incident wave on the bistatic scattering coefficient is very complex.     

Characteristics of Photonic Bandgap Fibres with Hollow Core＇s Inner Surface Coated by a Layer Material

Hollow core＇s inner surface coating in a photonic bandgap fibre （PBCF） is investigated by means of finite element method. The coat material and thickness-dependence dispersion curve and group velocity dispersion are numerically studied. The coating with materials of low index or small thickness will rise up the dispersion curve but will not induce surface modes. However, coating with materials of high index or big coat thickness will induce surface modes and avoided-crossings. By varying coat material＇s refractive index and thickness, the appearances of surface modes and avoided-crossings can be changed. It is found that the avoided-crossing can enormously enlarge the negative dispersion which can find applications in dispersion compensation. We numerically achieve a negative dispersion as large as -21416.15ps/nm/km. The results give a physical insight into the propagation properties of PBGFs with the hollow core coated by a layer of material and are of crucial significance in the applications of PBGF coating.     

浅海起伏海面下气泡层对声传播的影响

分析了起伏海面下风浪引起的气泡层对海面反射损失和对声传播的影响.一方面,气泡层会改变原来水中的声速剖面;另一方面,气泡层会对声波产生散射和吸收作用.考虑以上两方面的因素,分析了不同风速下气泡层对海面反射损失和声传播损失的影响,仿真发现,在风速大于10 m/s时,对于2 k Hz以上频率时气泡层对小掠射角下海面反射损失的影响不可忽视.在给定的水声环境中,当声源深度和接收深度都为7 m时,风速为16 m/s的风浪下生成的气泡层,在10 km处对3 k Hz的声传播损失的影响达到8.1 d B.当声源深度和接收深度都为18 m时,风速为16 m/s的风浪下生成的气泡层,在10 km处对3 k Hz的声传播损失的影响达到4 d B.     

Manipulation of plasmonic wavefront and light–matter interaction in metallic nanostructures: A brief review

The control and application of surface plasmons （SPs）, is introduced with particular emphasis on the manipulation of the plasmonic wavefront and light-matter interaction in metallic nanostructures. We introduce a direct design methodology called the surface wave holography method and show that it can be readily employed for wave-front shaping of near-infrared light through a subwavelength hole, it can also be used for designing holographic plasmonic lenses for SPs with complex wavefronts in the visible band. We also discuss several issues of light-matter interaction in plasmonic nanostructures. We show theoretically that amplification of SPs can be achieved in metal nanoparticles incorporated with gain media, leading to a giant reduction of surface plasmon resonance linewidth and enhancement of local electric field intensity. We present an all-analytical semiclassical theory to evaluate spaser performance in a plasmonic nanocavity incorporated with gain media described by the four-level atomic model. We experimentally demonstrate amplified spontaneous emission of SP polaritons and their amplification at the interface between a silver film and a polymer film doped with dye molecules. We discuss various aspects of microscopic and macroscopic manipulation of fluorescent radiation from gold nanorod hybrid structures in a system of either a single nanoparticle or an aligned group of nanoparticles. The findings reported and reviewed here could help others explore various approaches and schemes to manipulate plasmonic wavefront and light-matter interaction in metallic nanostructures for potential applications, such as optical displays, information integration, and energy harvesting technologies.     

Ferromagnetic-insulators-modulated transport properties on the surface of a topological insulator

Transport properties on the surface of a topological insulator （TI） under the modulation of a two-dimensional （2D） ferromagnet/ferromagnet junction are investigated by the method of wave function matching. The single ferromagnetic barrier modulated transmission probability is expected to be a periodic function of the polarization angle and the planar rotation angle, that decreases with the strength of the magnetic proximity exchange increasing. However, the transmission probability for the double ferromagnetic insulators modulated n-n junction and n-p junction is not a periodic function of polarization angle nor planar rotation angle, owing to the combined effects of the double ferromagnetic insulators and the barrier potential. Since the energy gap between the conduction band and the valence band is narrowed and widened respectively in ranges of 0 ≤ 0 〈π/2 and r/2 〈 0 ≤ π, the transmission probability of the n-n junction first increases rapidly and then decreases slowly with the increase of the magnetic proximity exchange strength. While the transmission probability for the n-p junction demonstrates an opposite trend on the strength of the magnetic proximity exchange because the band gaps contrarily vary. The obtained results may lead to the possible realization of a magnetic/electric switch based on TIs and be useful in further understanding the surface states of TIs.     

Analysis and applications of a frequency selective surface via a random distribution method

A novel frequency selective surface （FSS） for reducing radar cross section （RCS） is proposed in this paper. This FSS is based on the random distribution method, so it can be called random surface. In this paper, the stacked patches serving as periodic elements are employed for RCS reduction. Previous work has demonstrated the efficiency by utilizing the microstrip patches, especially for the reflectarray. First, the relevant theory of the method is described. Then a sample of a three-layer variable-sized stacked patch random surface with a dimension of 260 mm x 260 mm is simulated, fabricated, and measured in order to demonstrate the validity of the proposed design. For the normal incidence, the 8-dB RCS reduction can be achieved both by the simulation and the measurement in 8 GHz-13 GHz. The oblique incidence of 30° is also investigated, in which the 7-dB RCS reduction can be obtained in a frequency range of 8 GHz-14 GHz.     

Numerical and analytic study of rough surface morphology on the angular distribution of eroded impurity

The impact of rough surface morphology on the angular distribution of eroded impurities has been investigated with the three‐dimensional (3D ) rough surface code SURO and a newly developed analytic model. The property of the rough surface structure can be described by the shadow angle of the rough surface in SURO , which is defined as the ratio of the horizontal characteristic length to the initial surface roughness. The SURO simulation results show that the influence of the rough surface on the angular distribution of eroded impurities comes into play when the shadow angle is larger than a threshold value. The larger shadow angle of the rough surface leads to a stronger shift of the angular distribution of the eroded impurities. Different rough surface topographies have been used in the SURO code to check the angular distribution of the eroded impurities. It is found that the shift tendency of the angular distribution is similar for different structures of the rough surface. Based on the numerical modelling results, an analytical model has been developed to investigate the impact of the shadow angle on the angular distribution of the eroded impurities, which shows the consistent result as the SURO simulations.     

Designing analysis of the polarization beam splitter in two communication bands based on a gold-filled dual-core photonic crystal fiber

We design a novel kind of polarization beam splitter based on a gold-filled dual-core photonic crystal fiber （DC-PCF）. Owing to filling with two gold wires in this DC-PCF, its coupling characteristics can be changed greatly by the second-order surface plasmon polariton （SPP） and the resonant coupling between the surface plasmon modes and the fiber-core guided modes can enhance the directional power transfer in the two fiber-cores. Numerical results by using the finite element method show the extinction ratio at the wavethlengths of 1.327 μm and 1.55 μm can reach -58 dB and -60 dB and the bandwidths as the extinction ratio better than -12 dB are about 54 nm and 47 nm, respectively. Compared with the gold-unfilled DC-PCF, a 1.746-mm-long gold-filled DC-PCF is better applied to the polarization beam splitter in the two communication bands of λ = 1.327 μm and 1.55 μm.     

Manipulation of extraordinary acoustic transmission by a tunable bull’s eye structure

Extraordinary acoustic transmission （EAT） has been investigated in a tunable bull＇s eye structure. We demonstrate that the transmission coefficient of acoustic waves can be modulated by a grating structure. When the grating is located at a distance of 0.5 mm from the base plate, the acoustic transmission shows an 8.77-fold enhancement compared to that by using a traditional bull＇s eye structure. When the distance increases to 1.5 mm, the transmission approaches zero, indicating a total reflection. Thus, we can make an efficient modulation of acoustic transmission from 0 to 877%. The EAT effects have been ascribed to the coupling of structure-induced resonance with the diffractive wave and the waveguide modes, as well as the Fabry-Perot resonances. As a potential application, the modulation of far-field collimation is illustrated in the proposed bull＇s eye structure.     

Pulsed ion beam-assisted carburizing of titanium in methane discharge

The carburizing of titanium (Ti) is accomplished by utilizing energetic ion pulses of a 1.5 kJ Mather type dense plasma focus (DPF) device operated in methane discharge. X-ray diffraction (XRD) analysis confirms the deposition of polycrystalline titanium carbide (TiC). The samples carburized at lower axial and angular positions show an improved texture for a typical (200)TiC plane. The Williamson-Hall method is employed to estimate average crystallite size and microstrains in the carburized Ti surface. Crystallite size is found to vary from ～ 50 to 100 nm, depending on the deposition parameters. Microstrains vary with the sample position and hence ion flux, and are converted from tensile to compressive by increasing the flux. The carburizing of Ti is confirmed by two major doublets extending from 300 to 390 cm-1 and from 560 to 620 cm-1 corresponding to acoustic and optical active modes in Raman spectra, respectively. Analyses by scanning electron microscopy/energy dispersive x-ray spectroscopy (SEM/EDS) have provided qualitative and quantitative profiles of the carburized surface. The Vickers microhardness of Ti is significantly improved after carburizing.