二维光子晶体波导与单模平面介质波导间的喇叭波导接头

提出并优化了用于二维介质柱光子晶体波导与单模平面介质波导对接的基于分布布拉格反射波导的喇叭波导接头，提高了这两种波导之间的传输效率.二维时域有限差分仿真结果表明，在大部分光子晶体波导导模的频谱范围内，传输效率高于98％.传输效率最高可以达到99.85％. 关键词： 光子晶体波导 平面介质波导 时域有限差分     

Electromagnetic modes in semi-infinite photonic crystals

In a real photonic crystal, there exist three modes: propagation mode, evanescence mode and surface mode. Using ideal modal, semi-infinite photonic crystals, we study their effects on the transmission spectrum of photonic crystals, respectively. Because there exists only one air–crystal interface in a semi-infinite photonic crystal, no multiple reflection occurs and no evanescent modes and backward-propagating modes exist in this structure. The effects of the evanescence modes are studied by comparing the transmission spectrum of a finite-thickness photonic crystal slab and that of a semi-infinite photonic crystal. In addition, the effects of the backward-propagating modes are investigated using a coated semi-infinite photonic crystal structure. Finally, we study the effects of the surface modes, and find that the transmission spectrum of a semi-infinite photonic crystal is strongly dependent on its termination.     

Applications of the finite difference mode solution method to photonic crystal structures

The finite difference waveguide mode solution method, which has been popularly employed in the study of waveguide modes on various optical and dielectric waveguides, is utilized to calculate the modal characteristics of photonic crystal fibers (PCFs) and planar photonic crystal waveguides and the band diagrams of two-dimensional photonic crystals. Vector guided modes on both PCFs based on the total internal reflection guiding mechanism ('holey fibers') and those resulting from photonic band gap effect are accurately computed, with their effective indexes and field distributions compared with other methods. Calculated dispersion of a single-core holey fiber and coupled-power behavior of a two-core holey fiber are found to agree with measured results. For applications to band diagram calculation and planar photonic crystal waveguide analysis, the finite difference scheme is modified simply by imposing suitable periodic boundary condition. Numerical results for air-column crystals and dielectric-rod crystals are both found to agree well with calculations using other methods.     

On‐demand photonic crystal resonators

Recent progress in the field of re‐locatable photonic crystal resonators is discussed with a particular emphasis on the flexible scheme that employs highly‐curved microfiber. In this scheme a spectrally‐tunable high‐quality‐factor resonator can be defined repeatedly by physically moving a curved microfiber to a new position. When a curved microfiber is placed on top of a photonic crystal waveguide (or photonic crystal), a photonic well is newly created in the vicinity of the contact point. Inside of this photonic well, high‐quality‐factor resonant modes are generated at frequencies below the cutoff edge of the guided mode. The tapered microfiber is an integral part of a single mode optical fiber and efficient out‐coupling is naturally obtained. The sub‐nanometer spectral tuning capability that is available by changing the curvature of the microfiber is also an important characteristic and discussed. This spectrally‐ and spatially‐reconfigurable photonic crystal resonator is expected to be a potential platform for photonic crystal based single photon sources, which enables accurate spatial overlap and spectral overlap with a single quantum dot, together with straightforward photon out‐coupling to the fiber with high efficiency.     

激光泵浦碲化物产生中红外超连续谱数值模拟

对2 m波段脉冲激光泵浦碲化物光子晶体光纤产生中红外超连续谱进行了数值研究。通过材料的拉曼增益谱间接求得了对应的拉曼响应函数;由光子晶体光纤的材料折射率和波导结构,通过COMSOL软件获得了碲化物光子晶体光纤中基模等效折射率,计算了相应的色散曲线和限制损耗 ;利用自适应的分步傅里叶算法,模拟了中心波长为1.96m、峰值功率为20 kW的50 fs脉冲光泵浦碲化物光子晶体光纤时超连续谱的产生,当光纤长度为6 cm时,产生的中红外超连续谱波长范围为1.0~4.5 m。     

非线性一维光子晶体波导光双稳

利用非线性折射率系数较大且非线性时间响应较快的CdS_xSe_1-x玻璃为材料,设计并制备了非线性一维光子晶体波导光双稳器件,该器件的折射率空间分布呈正弦形式。实验测得双稳开关的阈值功率密度为1.60×10⁵W/cm²,开关时间为63ps。采用时域有限差分方法讨论了光子晶体带隙随入射光强变化而移动的情况,随着入射光功率密度的增加,光子晶体的带隙中心向短波方向移动。同时计算了该器件的双稳特性,理论计算得到双稳开关的阈值功率密度为1.40×10⁵W/cm²,开关时间约为50ps。获得了理论与实验基本一致的结果。     

Adiabatic coupling between conventional dielectric waveguides and waveguides with discrete translational symmetry

We study adiabatic transformation in optical waveguides with discrete translational symmetry. We calculate the reflection and transmission coefficient for a structure consisting of a slab waveguide that is adiabatically transformed into a photonic crystal waveguide and then back into a slab waveguide. The calculation yields high transmission over a wide frequency range of the photonic crystal waveguide band and indicates efficient coupling between the slab waveguide and the photonic crystal waveguide. Other applications of adiabatic mode transformation in photonic crystal waveguides and the coupled-resonator optical waveguides are also discussed.     

光子晶体光纤模式特征的研究

从基空间填充模出发，将光子晶体光纤的包层等效成均匀介质，从而将光子晶体光纤等效为阶跃折射率光纤。利用等效折射率模型，对光子晶体光纤的模式特征进行了详尽的研究，主要包括模式特性、传输常量、模场分布、功率限制特性、瑞利散射损牦特性、色散特性，等等。并通过功率限制因子这一参量将它与单模光纤进行比较。结果表明，光子晶体光纤单模工作波长范围比较宽，功率限制因子比较高，可用于制作更高抽运效率的光纤放大器。     

用级联缓变结构实现光子晶体波导和传统波导的耦合

为了提高光子晶体波导与传统介质波导的耦合效率,设计了级联缓变结构.先将传统介质波导中的光耦合进尺寸相当的光子晶体W5波导中,然后W5波导中的光被耦合进尺寸较小些的W3波导中,最后光被耦合进尺寸最小的W1波导.各级波导之间由半径逐渐增大的空气孔连接,空气孔半径逐渐变化相当于波导有效折射率在变化,所以各级波导可以看作是被折射率缓变结构连接起来.由于折射率的缓变,使得光从前一级波导耦合进相邻的后一级波导时反射很小,从而能有效地提高耦合效率.数值计算表明,在光子晶体禁带范围内,除了波导有限长度和波导微小禁带造成的微小不通带外,耦合系数一般能达80%左右,最高可达到95%.     

基于低非线性系数光子晶体光纤的全光纤高效超连续谱光源

 报道了一种基于低非线性系数光子晶体光纤的全光纤高效率超连续谱产生系统。将光纤锁模激光器输出的脉宽5 ps、重复频率20 MHz、平均功率50 mW的脉冲,输入到15 μm的大模场光纤中进行放大,通过与两级芯径较小的短光纤模场匹配缩小输出的模场直径后,输入到20 m低非线性系数的光子晶体光纤,获得的超连续谱波长覆盖范围宽于650～1 700 nm。输入光子晶体光纤的泵浦光功率为740 mW,输出超连续光功率为670 mW,转换效率大于90%。实验研究了超连续光谱展宽的过程,从理论上进行了分析解释。     

双包层大模场面积保偏掺镱光子晶体光纤研究

采用改进的化学气相沉积法和溶液掺杂法制备出掺镱石英光纤预制棒,以该预制棒为有源纤芯制备芯区直径约为30μm的双包层保偏掺镱光子晶体光纤.模拟计算得到该保偏光纤的模场面积约232μm2,双折射系数B为5×10-5.利用该光纤分别进行了脉冲激光和连续激光的放大测试实验,在国内首次实现了高效率的飞秒激光放大,2 m长的光子晶体光纤可得到1.64 W的激光输出,激光放大斜率效率为49.8%.同时5 m长的光纤还能够实现8.12 W的连续激光放大输出,斜率效率达到55.9%,具有较高的斜率效率.此外,该光纤消光比约10 dB,具有良好的保偏特性.     

光控液晶光子晶体微腔全光开关

设计了一种缺陷模迁移光子晶体微腔全光开关. 两条二维三角晶格空气孔光子晶体波导由一个光子晶体微腔连接, 在微腔的点缺陷中填充掺有少量偶氮聚合物的苯乙炔类液晶. 通过调节控制光的偏振态, 使偶氮聚合物发生顺-反异构化反应, 带动液晶分子重新取向, 从而改变光子晶体微腔的谐振波长, 进而实现光的通过与截止. 运用时域有限差分法和平面波展开法分析 了二维光控液晶光子晶体微腔全光开关的光学特性. 数值计算结果表明: 对于1.55 μ通信波段通过外界偏振光控制所填充的向列相液晶 的折射率可以实现对光波的导通与截止. 分析结果显示, 此开关具有阈值低, 消光比较大, 体积小等优点. 关键词： 二维光子晶体微腔 波导 时域有限差分(FDTD) 液晶     

Coupling into the slow light mode in slab-type photonic crystal waveguides

Coupling external light signals into a photonic crystal (PhC) waveguide becomes increasingly inefficient as the group velocity of the waveguiding mode slows down. We have systematically studied the efficiency of coupling in the slow light regime for samples with different truncations of the photonic lattice at the coupling interface between a strip waveguide and a PhC waveguide. An inverse power law dependence is found to best fit the experimental scaling of the coupling loss on the group index. Coupling efficiency is significantly improved up to group indices of 100 for a truncation of the lattice that favors the appearance of photonic surface states at the coupling interface in resonance with the slow light mode.     

Optical surface modes of photonic crystals for dual-polarization waveguide

In this study, the design of a polarization-independent (dual-polarization) waveguide is presented by utilizing surface modes of photonic crystals. The waveguide structure operates in a frequency interval that is commonly shared by both transverse-electric (TE) and transverse-magnetic (TM) polarizations. The numerical calculations based on plane wave expansion and finite-difference time-domain methods are carried out to design and demonstrate a surface mode waveguide that provides confinement and guiding for both TE and TM modes. Once the relevant modes are properly excited, the high transmission efficiency of the photonic crystal surface waveguide is ensured. The demand to have polarization-insensitive devices makes our proposed design an important component for the photonic integrated circuit applications. Finally, we also propose a broadband surface mode photonic crystal waveguide with a bandwidth value of 28% for only TE polarization.     

Influence of a holey cladding structure on spectral characteristics of side-polished endlessly single-mode photonic crystal fibers

We experimentally investigate the spectral characteristics of side-polished endlessly single-mode photonic crystal fibers of different polishing depths and radii of curvature that are important to mode field diameter, evanescent coupling, waveguide losses, higher-order mode excitation, and dispersion slopes of photonic crystal fiber components. A polished photonic crystal fiber with a greater polishing depth or a larger radius of curvature shows a more dispersive characteristic. In contrast to conventional single-mode fibers, in photonic crystal fibers the evanescent field is more strongly localized, and the propagating light can be more efficiently guided within the deformed core.     

Tapered microstructured fibers for efficient coupling to optical waveguides: a numerical study

We report the possibility of using tapered microstructured fibers to improve the coupling efficiency from a standard single-mode fiber to a photonic crystal waveguide. The tapered microstructured fiber allows for the reduction of the mode mismatch between the output of the standard fiber and the input of the waveguide while maintaining single-mode guidance, which results in an enhanced coupling efficiency. Numerical simulations are conducted in order to optimize the cross section of the microstructured fiber as well as the taper profile. An improvement of more than 4 dB is obtained compared to non-tapered fibers. For further improvement, an elliptical-core tapered microstructured fiber is analyzed. The effect of misalignment between the tapered microstructured fiber and the waveguide is also studied.     

基于硅纳米线波导的两级光子晶体缩束器

鉴于在微观领域光波的缩束对实现光电集成的重要意义,提出了基于硅纳米线波导的两级光子晶体缩束器。其中一级压缩基于W5型和W1型光子晶体波导间的高效耦合。二级压缩则由宽为0.1μm,长为3.06μm的纳米线波导和W1型光子晶体波导构成,通过二者的高效耦合实现光束压缩。当W1型光子晶体波导和纳米线波导间介质柱的半径为0.04μm时,对于1550nm波长的电磁波,缩束器的通光效率可达93.4%,压缩比为16.08,出射光束半峰全宽仅为0.148μm。     

Optimization the coupling coefficient of large mode area PCF using 2D FDTD method

The 2D FDTD method is used to design a tapered photonic crystal fiber, where large mode area is prominently coupled to optical fiber. For the first time, we observed that the mode area is stabilized with respect to possible fabrication tolerance by implementing a secondary surrounding waveguide with configuration of large air holes in the outer ring. The mode field area can be obtained in tapered region using a full vectorial H field technique. Beside these, the coupling coefficient can be optimizing by using least square boundary residual technique.     

高品质因子和高传输效率的二维光子晶体耦合腔波导研究

基于时域有限差分方法,通过仿真计算设计了一种具有较高品质因子和传输效率的二维光子晶体耦合腔波导结构。通过改变二维光子晶体波导微腔结构中隔绝波导与微腔的空气孔的半径和数量,在获得近似90%的传输效率的同时,使得品质因子达到了8.20×104。为了使品质因子在大幅度提高的同时,传输效率只有小幅度的降低,在波导微腔结构中引入了链式微腔。将链式微腔结构与传统的波导微腔结构相结合,使这种新形式的耦合腔结构的品质因子提高了1个数量级,传输效率仅下降了约40%。     

并联谐振腔光子晶体单通道侧面耦合波导

分析了多光子晶体谐振腔的并联耦合模理论,并根据该理论设计了单通道光子晶体侧面耦合波导以实现光子晶体器件与光源间的高效耦合。理论研究表明并联谐振腔的耦合效率与谐振腔数量、间距以及品质因子相关。经优化耦合面积和耦合效率,最终选择了5个谐振腔并联作为单通道侧面耦合波导的耦合部分。通过设置谐振腔间距改变其对称性,从而实现侧面耦合波导的单通道传播。在1.55μm工作波长下,单通道侧面耦合波导的耦合效率可达94.49%。