吡嗪分子在硅(100)面吸附构型的XPS和NEXAFS谱理论研究（英文）

本文利用X射线谱研究了吡嗪(C_4H_4N_2)分子共价吸附于硅(100)面的几种吸附构型的几何结构和电子结构.利用密度泛函理论结合团簇模型,对预测的吸附结构的碳K壳层(1s)X射线光电子能谱(XPS)和近边X射线吸收精细结构(NEXAFS)谱进行了模拟.计算结果阐明了XPS和NEXAFS谱与不同吸附构型的对应关系.与XPS谱相比,NEXAFS谱对所研究的吡嗪/硅(100)体系的结构有明显的依赖性,可以很好地用于结构鉴定.根据碳原子的分类,研究了在NEXAFS光谱中不同化学环境下碳原子的光谱成分.     

脉冲激光沉积的金属原子团簇的电子状态及生长的研究

 介绍了采用X射线光电子谱(XPS)等技术研究脉冲激光沉积在Ni、Mo、C、NaCl(100)表面的Cu、Au原子团簇的电子状态;结合Cu₂p_3/2 X射线光电子谱峰和Cu L₃M_4,5M_4,5俄歇跃迁分离了电子结合能的初态和终态贡献,得出了它们随Cu表面浓度变化的关系,并对之作出了解释。使用XPS、RBS、TEM三项技术研究了Au在NaCl(100)表面的生长过程,通过计算得出了在不同表面浓度下Au原子团簇的平均高度和表面覆盖率。     

Cr4+:Ca2GeO4激光晶体生长及结构表征

采用助熔剂法,以CaCl₂为助熔剂,生长Cr⁴⁺ :Ca₂GeO₄新型近红外可调谐激光晶体.通过X射线衍射(XRD)、激光Raman光谱、X射线光电子能谱(XPS)等方法对晶体进行结构表征.结果表明,得到的晶体为单斜晶系镁橄榄石结构的低温γ-Cr⁴⁺ :Ca₂GeO₄单晶,晶格参数为a=5.3209 (1 =0.1 nm)     

C2H4/Ni(100)近边X射线吸收谱的多重散射理论研究

本文用多重散射原子集团方法计算并分析了C₂H₄/Ni(100)系统的碳K边近边X射线吸收精细结构(NEXAFS)谱,确定了乙烯吸附在Ni(100)表面上的几何结构。结果表明,乙烯是吸附在垂直桥位上的,其中碳原子与表面最近的镍原子距离是1.70?,而乙烯分子平面倾斜于表面50°,同时发现,氢和镍之间的相互作用对结构的形成有很大的作用,这些结果得到了不同途径的验证。 关键词：     

甲醇在Pt (100)表面吸附与解离的第一性原理研究.

采用基于第一性原理的密度泛函理论结合周期模型方法对甲醇在Pt(100)完整表面的吸附与解离进行了研究. 通过比较不同吸附位置的吸附能与构型参数发现,表面top吸附位为最稳定吸附位,甲醇分子通过氧原子吸附于Pt(100)表面. 同时计算了甲醇分子在top吸附位可能的解离路径,发现在解离过程中OH键首先断裂的路径为最低能量路径. 分解生成的若干产物其吸附稳定性排序为CH₃O>CH₂OH>CH₃>CH₂O.     

三甲基镓在Pd(111)表面吸附解离及表面预吸附H和O的影响

利用X-射线光电子能谱（XPS）和程序升温脱附谱（TPD）研究了三甲基镓在Pd（111）表面的吸附和解离行为,并考察了表面预吸附H和O的影响。结果表明,在吸附温度为140 K时,三甲基镓在Pd（111）上主要为解离吸附,此时表面物种为Ga（CH₃）_x （x=1,2,3）和CH_x物种。加热将导致Ga的甲基化合物中的Ga-C键发生分步断裂,在不同温度下产生CH₄和H₂从表面脱附。同时,XPS结果证实了在275~325 K的温度区间内存在Ga甲基化合物的分子脱附。退火至更高温度,表面只观察到积碳和金属Ga物种,这二者随着温度的继续升高逐渐向体相扩散。在Pd（111）表面预吸附O和H对上述吸附和解离行为存在显著的影响。当表面预吸附H时,脱附产物CH₄和H₂的脱附主要位于315 K,可归属为一甲基镓的解离脱附。当表面预吸附O时,只在258 K观察到CH₄和H₂的脱附峰,可能来自于Pd-O-Ga（CH₃）₂吸附结构的解离.     

分子团簇表面吸附敏化ZnO纳米线的第一性原理研究

ZnO纳米线作为新型太阳能电池结构的重要组成部件之一, 其导电能力直接影响到太阳能电池的性能. 采用密度泛函理论平面波超软赝势方法, 计算并分析了C₂H₆O(乙醇)、 C₆H₅FS(4-氟苯硫酚)、 C₇HF₇S(4-(三氟甲基L)-2, 3, 5, 6-四氟硫代苯酚) 等小分子吸附的六边形结构\langle0001angle ZNWs (ZnO 纳米线) 的几何结构、 吸附能和电子结构. 首先, 通过几何优化得到了不同基团吸附的ZNWs的稳定结构, 同时吸附能计算结果表明C₇HF₇S吸附的体系结构最为稳定, 且吸附呈现放热反应; 其次, 为研究表面敏化对导电性能的影响, 计算了不同小分子基团吸附下的能带结构和态密度, 并利用能带理论分析了表面吸附敏化对禁带宽度的调控机理, 结果分析表明小分子表面吸附敏化对ZNWs的电学性能有一定的影响, 其中C₇H₇FS和C₆H₅FS分子均发生了不同程度的电荷转移.     

有机金属化学气相沉积法制备的Ni/Al2O3纳米复合材料的氢吸附

研究了通过有机金属化学气相沉积技术及单源分子前躯体方法制备的Ni/Al₂O₃纳米复合材料的氢吸附(存储). 在冷壁的有机金属化学气相沉积反应器中,通过降解Ni(acac)₂粉末基底上的[H₂Al(OtBu)]₂制备的Ni/Al₂O₃纳米复合材料. 通过X射线粉末衍射、扫描电镜、透射电镜以及能量色散型X射线荧光光谱等技术表征该复合材料. 采用自制Sievert's设备研究该复合材料的氢吸附(存储),可以储存约2.9%(重量比)的氢.     

焙烧温度对SiO2负载的Co3O4纳米粒子表面氧缺陷浓度和CO氧化催化性能的影响

以传统的浸渍法,在不同焙烧温度下制备了用于CO氧化反应的Co₃O₄/SiO₂催化剂．通过激光拉曼光谱(Raman)、X射线光电子能谱(XPS)、X射线衍射(XRD)、程序升温还原(TPR)和X射线吸收精细结构谱(XAFS)表征了该系列催化剂的结构．在所有的催化剂中,XRD和Raman光谱都只检测到了Co₃O₄晶相的存在．与Co₃O₄体相相比,XPS结果表明在200 oC焙烧的(Co₃O₄(200)/SiO₂)催化剂中Co₃O₄表面上存在着过量的Co²⁺．与XPS的结果一致,TPR结果表明Co₃O₄(200)/SiO₂催化剂中Co₃O₄表面上存在氧缺陷, 并且XAFS结果也表明Co₃O₄(200)/SiO₂催化剂中Co₃O₄具有更多的Co²⁺．提高焙烧温度使得过量的Co²⁺进一步氧化为Co³⁺,同时降低了表面氧缺陷浓度,从而得到计量比的Co₃O₄4/SiO₂催化剂．在所有的负载催化剂中Co₃O₄(200)/SiO₂催化剂表现出了最好的CO氧化催化性能,表明过量Co²⁺和表面氧缺陷的存在能够促进Co₃O₄催化CO氧化反应的活性.     

CO和O2分子与TiO2(110)表面负载Pt单原子的相互作用

Pt单原子在低温CO氧化反应中具有很高的催化活性. 利用扫描隧道显微术与密度泛函理论，研究了Pt单原子在还原性TiO₂(110)表面的吸附行为及其与CO和O₂分子的相互作用. 研究发现在80 K低温下，TiO₂表面的氧空位缺陷是Pt单原子的最优吸附位. 将CO和O₂分子分别通入Pt单原子吸附后的TiO₂表面，研究相应的吸附构型. 实验表明在低覆盖度下，单个Pt原子会俘获一个CO分子，CO分子同时与表面次近邻的五配位Ti原子(Ti_5c)成键，进而形成非对称的Pt-CO 复合物构型. 将样品从80 K升温到100 K后，TiO₂表面的CO分子会迁移到Pt-CO处形成Pt-(CO)₂的复合结构. 对于O₂分子，单个Pt原子同样会吸附一个O₂分子，O₂分子也会与最近邻或次近邻的Ti_5c原子成键形成两种Pt-O₂构型. 这些结果在单分子尺度上揭示了CO和O₂与Pt单原子的相互作用，呈现了CO与O₂反应中的初始状态.     

Predicting and researching adsorption configurations of pyridazine on Si(100) surface by means of X-ray spectroscopies in theory

The landscape of organic molecule on Si(100) surface has a great significance for organic functionalisation of Si semiconductor. Several possible adsorption configurations for pyridazine on Si(100) surface have been forecasted by systemic comparison and investigation. The C1s XPS and NEXAFS spectra of these adsorption systems based on density functional theory and full core-hole potential approximation have been calculated. Although the sensibility of XPS to these adsorption configurations is not very strong, these configurations can be absolutely distinguished by NEXAFS spectra, which will bring tremendous reference to the future experimental study. Mode II, III, V and VI have a significantly higher adsorption energy, which are most likely to be present in experiment. In addition, we have made the research on specific sources of the peaks in spectra by analysing their decomposed NEXAFS spectra, the results show that the Carbon atoms which do not bond to surface atoms, make the most contribute to the intensity of characteristic peaks in spectra.     

Experimentally observed orientation of C60F18 molecules on the nickel single crystal (100) surface

The angular dependence of near edge X-ray absorption fine structure (NEXAFS) spectra has been obtained in the vicinity of carbon and fluorine 1s absorption edges in a monolayer film of polar fullerene fluoride (C₆₀F₁₈) molecules on a Ni(100) substrate. The fine structure of the spectra has been identified according to experimental data via calculations based on the density functional theory, and the angular dependence of the spectra has been explained. The orientations of structural molecular fragments are determined from the angular dependence of the NEXAFS spectra. It is demonstrated that the electric dipole moment of a C₆₀F₁₈ molecule is oriented along the normal to the substrate surface with an accuracy of 5°.     

Investigating the fine structure of near-edge X-ray absorption in the molecular spectra of C60F18 adsorbed on a single nickel crystal

Angular dependences of the fine structure of near-edge X-ray absorption (NEXAFS) of carbon C1s spectra are obtained for a monolayer film of C₆₀F₁₈ polar molecules on a Ni (100) substrate. The fine structure and angular dependences of these spectra are interpreted using calculation data obtained by the density functional method upon fitting NEXAFS spectra by the set of trial functions. It is shown that during deposition, the dipole moment of molecules is oriented perpendicular to the surface and fluorine atoms are the ones closest to the surface.     

Experimental and theoretical studies of interactions between Si<Subscript>7</Subscript> clusters

The possibility of using magic Si₇ clusters to form a cluster material was studied experimentally and theoretically. In experiments Si₇ clusters were deposited on carbon surfaces, and the electronic structure and chemical properties of the deposited clusters were measured using X-ray photoelectron spectroscopy (XPS). A non bulk-like electronic structure of Si₇ was found in the Si 2p core level spectra. Si₇ is suggested to form a more stable structure than the non-magic Si₈ cluster and Si atoms upon deposition on carbon surfaces. Theoretically it was possible to study the interaction between the clusters without the effect of a surface. Density functional theory (DFT) calculations of potential curves of two free Si₇ clusters approaching each other in various orientations hint at the formation of cluster materials rather than the fusion of clusters forming bulk-like structures.     

Landscape of s-triazine molecule on Si(100) by a theoretical x-ray photoelectron spectroscopy and x-ray absorption near-edge structure spectra study

The chemisorbed structure for an aromatic molecule on a silicon surface plays an important part in promoting the development of organic semiconductor material science. The carbon K-shell x-ray photoelectron spectroscopy(XPS) and the x-ray absorption near-edge structure(XANES) spectra of the interfacial structure of an s-triazine molecule adsorbed on Si(100) surface have been performed by the first principles, and the landscape of the s-triazine molecule on Si(100) surface has been described in detail. Both the XPS and XANES spectra have shown their dependence on different structures for the pristine s-triazine molecule and its several possible adsorbed configurations. By comparison with the XPS spectra, the XANES spectra display the strongest structural dependency of all of the studied systems and thus could be well applied to identify the chemisorbed s-triazine derivatives. The exploration of spectral components originated from non-equivalent carbons in disparate local environments has also been implemented for both the XPS and XANES spectra of s-triazine adsorbed configurations.     

Orientation ordering of N<Subscript>2</Subscript> molecules in vertically aligned CN<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> nanotubes

Arrays of vertically aligned nitrogen-doped carbon (CN _x ) nanotubes have been synthesized by decomposition of aerosol mixture of acetonitrile and ferrocene at 850°C. Nitrogen concentration in the outer shells of the CN _x nanotubes was found from X-ray photoelectron spectroscopy (XPS) data to reach ∼6%. The XPS N 1s spectra and N 1s near-edge X-ray absorption fine structure (NEXAFS) spectra identified three chemical forms of nitrogen in the CN _x nanotube arrays: pyridine-like, graphitic, and molecular nitrogen. The π ^* resonance of molecular nitrogen showed clear polarization dependence that indicates predominant orientation of N₂ molecules along the nanotubes axis. The estimated range of the polar angle distribution of the N₂ molecules orientation in the CN _x nanotube array amounts to 15°.     

Interactions between glycine and amorphous solid water nanoscale films

The interactions of glycine (Gly) with amorphous solid water (ASW) nanolayers (≤ 100 ML), vapor-deposited on single crystalline AlO_x surfaces at 100 K, have been investigated by near-edge X-ray absorption fine structure spectroscopy (NEXAFS) at the oxygen K-edge, temperature-programmed thermal desorption (TPD), X-ray photoelectron spectroscopy (XPS), and temperature-dependent work function measurements. Gly-on-ASW, ASW-on-Gly, and Gly on top of ASW-on-Gly ultrathin films have been fabricated. In contrast to the uniform ASW films grown directly on the hydrophilic AlO_x, water molecules adsorb on the hydrophobic Gly films in the form of 3D ASW clusters. This leads to significant differences in the NEXAFS and work function data obtained from ASW-on-AlO_x and ASW-on-Gly films, respectively. Furthermore, these structural differences influence the chemical state of Gly molecules (neutral vs. zwitterionic) adsorbed on top of ASW films. N1s XPS measurements revealed an increased amount of neutral Gly molecules in the film top-deposited on the ASW-on-Gly structure in comparison to the neutral Gly in the films directly condensed on AlO_x or grown on the ASW substrate. H₂O TPD spectra demonstrate that the crystallization and desorption processes of ASW are affected in a different way by the Gly layers, top-deposited on to ASW-on-AlO_x and ASW-on-Gly films. At the same time, Gly adlayers sink into the ASW film during crystallization/desorption of the latter and land softly on the alumina surface in the form of zwitterionic clusters.     

Characterization of BCN films synthesized by radiofrequency plasma enhanced chemical vapor deposition

Boron carbonitride (BCN) films have been synthesized on Si(1 0 0) substrate by radio frequency plasma enhanced chemical vapor deposition using tris-(dimethylamino)borane (TDMAB) as a precursor. The deposition was performed at the different RF powers of 400-800 W, at the working pressure of 2×10⁻¹ Torr. The formation of the sp²-bonded BCN phase was confirmed by Fourier transform infrared spectroscopy. X-ray photoelectron spectroscopy measurements showed that B atoms were bonded to C and N atoms to form the BCN atomic hybrid configurations with the chemical compositions of B₅₂C₁₂N₃₆ (sample 1; prepared at the RF power of 400 W), B₅₂C₁₀N₃₈ (sample 2; at 500 W) and B₄₆C₁₈N₃₆ (sample 3; at 800 W), respectively. Near-edge X-ray absorption fine structure (NEXAFS) measurements indicated that B atoms were bonded not only to N atoms but also to C atoms to form various configurations of sp²-BCN atomic hybrids. The polarization dependence of NEXAFS suggested that the predominant hybrid configuration of sp²-BCN films oriented in the direction perpendicular to the Si substrate.     

Oxygen contaminants affecting on the electronic structures of the carbon nano tubes grown by rapid thermal chemical vapor deposition

Oxygen-related electronic structures of CNTs (carbon nanotubes) grown by rapid thermal chemical vapor deposition (RT-CVD) have been investigated by using partial electron yield near edge X-ray absorption spectroscopy (PEY-NEXAFS) and X-ray photoelectron spectroscopy (XPS). On the CNT surface with increased oxygen resulting from e-beam irradiation under the O₂ gas environment, C k-edge NEXAFS spectra showed an increase of the oxygen-related resonance peaks ranging from 287 to 289 eV whereas the sp² related peak at 285.4 eV was nearly unchanged. After the complete removal process of the oxygen atom on the surface by annealing the sample at 500 °C for 30 min, C K-edge spectra showed an abrupt decrease of the oxygen-related resonance peaks in 287-289 eV and an increase of the sp² related peak at 285.4 eV, indicating that the degree of crystallinity in the CNT sample was improved.     

The interaction between hexahydroxytriphenylene and the rutile TiO2(110)-(1 × 1) surface at UHV conditions

The interaction between 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) and the rutile TiO₂(110)–(1 × 1) surface under ultrahigh vacuum (UHV) conditions was investigated using X-ray photoemission spectroscopy (XPS), ultraviolet photoemission spectroscopy (UPS), near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, and density functional theory (DFT) calculations. The NEXAFS results showed that HHTP molecules formed a submonolayer and a monolayer that aligned along the [001]-direction with, respectively, a more or less flat downward orientation and a more upright orientation to the TiO₂ surface. The HHTP molecules that aligned along the [001]-direction were most likely grafted onto the TiO₂(110) surface by a bidentate bridge between each of the oxygen atoms of one of the catechol units within the HHTP molecule and two adjacent Ti(5f)⁴⁺ ions on the TiO₂(110) surface. The coordination is non-dissociative in the case of the submonolayer, but dissociative in the monolayer, according to the analysis of the C1s XPS, UPS, C1s NEXAFS data and complementary DFT calculations.