Fe、F掺杂Zn O的电子结构和光学性质研究

本文采用密度泛函理论框架下的第一性原理平面波超软赝势法，建立了Zn_(16)O_(16)、Zn_(15)Fe_1O_(16)、Zn_(16)O_(15)F_1、Zn_(15)Fe_1O_(15)F_1超晶胞，对掺杂前后ZnO超晶胞的能带结构分布、光学性质进行了计算与分析.计算结果表明:共掺杂Fe、F体系的形成能比单掺杂更小，稳定性更高;共掺杂体系的共价性最弱，更利于光生电子-空穴对的分离，且共掺杂体系的杂质能级数变得更为密集，电子更容易从低能级跃迁到高能级，进而提高光催化活性; Fe~(3+)的掺入导致费米能级进入导带，产生莫特相变，使之导电性增强;共掺杂体系的介电函数虚部向低能方向移动，在可见光区域的吸收峰值明显增大，说明Fe、F共掺杂是一种很好的光催化材料.     

Fe、F掺杂ZnO的电子结构和光学性质研究

本文采用密度泛函理论框架下的第一性原理平面波超软赝势法,建立了Zn_(16)O_(16)、Zn_(15)Fe_1O_(16)、Zn_(16)O_(15)F_1、Zn_(15)Fe_1O_(15)F_1超晶胞,对掺杂前后ZnO超晶胞的能带结构分布、光学性质进行了计算与分析.计算结果表明:共掺杂Fe、F体系的形成能比单掺杂更小,稳定性更高;共掺杂体系的共价性最弱,更利于光生电子-空穴对的分离,且共掺杂体系的杂质能级数变得更为密集,电子更容易从低能级跃迁到高能级,进而提高光催化活性;Fe~(3+)的掺入导致费米能级进入导带,产生莫特相变,使之导电性增强;共掺杂体系的介电函数虚部向低能方向移动,在可见光区域的吸收峰值明显增大,说明Fe、F共掺杂是一种很好的光催化材料.     

Al和N共掺p型Zn1-xMgxO电子结构的第一性原理计算

采用密度泛函理论下的第一性原理平面波超软赝势方法,对Zn1-xMgxO超晶胞和掺杂Al,N后的Zn1-xMgxO超晶胞分别进行了优化计算.结合广义梯度近似计算了Al和N共掺杂后Zn1-xMgxO的能带结构、电子态密度和Mulliken电荷布居分布.计算表明:掺入N原子的2p态电子为Zn1-xMgxO价带顶提供空穴载流子,使Zn1-xMgxO价带顶向高能方向移动;掺入Al原子的3p态电子则与N原子的2p态电子在费米能级附近发生轨道杂化,使费米能级处价带能级展宽,Al和N共掺杂可获得p型Zn1-xMgxO.     

Hf、N以不同比例掺杂ZnO的第一性原理计算

基于第一性原理密度泛函理论,计算分析了Hf、N以不同掺杂比例掺杂ZnO（Zn16O16）形成Zn15O16-xHfNx（x=1,2,3,4）体系的结构参数、电子结构、Mulliken电荷布居和光学方面的性质。计算结果表明,掺杂体系晶胞体积不同程度增大;x=1时体系的费米能级上移进入导带使其呈现n型半导体特征,吸收峰和反射峰红移较小,尤其是反射峰,主要表现为强度的变化;但x=2,3,4体系的费米能级均在价带顶附近,且随掺杂比例的增大,掺杂体系的费米能级进入价带的深度逐渐增大,N 2p态的贡献作用也越来越显著,使掺杂体系呈现p型半导体特征,吸收峰和反射峰均有较大的红移,这将有利于ZnO体系在可见光领域的应用。     

Zn,O共掺杂实现p型AlN的第一性原理研究

基于密度泛函理论(density functional theory),采用第一性原理平面波超软赝势法,研究了纤锌矿AlN,Zn掺杂和Zn,O共掺杂AlN的晶体结构、能带、电子态密度、差分电荷分布及电荷布居数.计算结果表明:Zn,O共掺杂方法中引入激活施主O原子,能使受主能级向低能方向移动,形成了浅受主能级.同时,受主能带变宽、非局域化特征明显、从而提高了Zn原子的掺杂浓度和系统的稳定性.Zn,O共掺杂更有利于获得p型AlN. 关键词： 第一性原理 AlN 电子结构 p型共掺杂     

Zn，O共掺杂实现p型AIN的第一性原理研究

基于密度泛函理论（density functional theory），采用第一性原理平面波超软赝势法，研究了纤锌矿AIN，Zn掺杂和Zn，O共掺杂AIN的晶体结构、能带、电子态密度、差分电荷分布及电荷布居数,计算结果表明：Zn，O共掺杂方法中引入激活施主O原子，能使受主能级向低能方向移动，形成了浅受主能级,同时，受主能带变宽、非局域化特征明显、从而提高了Zn原子的掺杂浓度和系统的稳定性,Zn，O共掺杂更有利于获得P型AIN．     

Mn2+、N2-共掺杂Zn2GeO4晶体电子结构和光学性质的研究

采用基于密度泛函理论的平面波超软赝势方法对本征Zn2GeO4，Mn2+掺杂Zn2GeO4，Mn2+/N2-共掺杂Zn2GeO4超晶胞进行了几何结构优化，计算了掺杂前后体系的晶格常数、能带结构、态密度和光学性质。结果表明，Mn离子掺入后，Mn离子3d轨道与O离子2p轨道之间有强烈的轨道杂化效应，掺杂系统不稳定，而Mn/N离子共掺后，Mn离子和N离子之间的吸引作用克服了Mn离子之间的排斥作用，能够明显地提高掺杂浓度和体系的稳定性。光学性质计算结果表明，Mn离子与N离子共掺杂能改善Zn2GeO4电子在低能区的光学跃迁特性，增强电子在可见光区的光学跃迁；吸收谱计算结果显示，Mn离子与N离子掺入后体系对低频电磁波吸收增加。     

Mn,Fe,Co掺杂GaAs电子结构与光学性质的第一性原理研究

采用基于密度泛函理论的平面波超软赝势方法对本征GaAs以及3d过渡金属Mn、Fe、Co单掺杂GaAs晶体的电子结构及其光学性质进行理论计算以及对比研究.计算结果表明:能带结构中三种掺杂体系均引入新的能级,能带条数增多,导带底与价带底顶向深能级移动,带隙减小;费米能级附近出现了杂质能级,导致掺杂体系光子能量位于0时介电函数虚部便有所响应,掺杂体系相较于本征体系的静介电常数有所提升;Mn、Fe、Co三种掺杂体系相较于本征体系在红外以及远红外区域吸收系数得到了明显的提升,其中Fe掺杂GaAs的光催化特性最好.     

AgSnO2触头材料在Ni-S共掺杂下的第一原理性计算

该研究采用掺杂的方式对SnO₂的导电性能进行改良,基于密度泛函理论的第一性原理,运用CASTEP软件对单掺杂Ni-SnO₂、S-SnO₂和共掺杂Ni-S-SnO₂的晶格参数、能带结构、电子态密度进行了计算,并对其电荷布居进行了分析.结果表明：S单掺杂时,晶胞体积略微增大;Ni单掺杂时,晶胞体积略微减小;而Ni-S共掺杂时,晶胞体积略微增大但增大幅度小于S单掺杂时的晶胞体积.与未掺杂相比,掺杂使得晶胞禁带减小、杂质能级增多、电子跃迁能减小,使其导电性增强,同时,掺杂使得费米能级附近峰值减小,局域性下降,原子间成键更强,材料更稳定.     

N-F共掺杂锐钛矿二氧化钛(101)面纳米管的第一性原理研究

共掺杂是提高二氧化钛纳米管可见光催化性能的一种有效方式. 采用基于密度泛函理论的第一性原理方法, 研究了N单掺杂、F单掺杂及N-F共掺杂二氧化钛纳米管的原子结构、电子性质和光学性质. 计算结果表明, 相比N单掺杂和F单掺杂, N-F共掺杂二氧化钛纳米管的形成能更低, 掺杂后的体系热力学稳定性更好. 此外, 相比未掺杂时的带隙, N-F共掺杂后体系的带隙变化最多, 减少了0.557 eV, 而这主要源于价带顶附近的杂质能级的贡献. 此外, 通过分析掺杂后的光催化活性发现, N-F共掺杂时纳米管的还原性和氧化性都有所降低, 但并没有丧失活性, 并且光吸收谱表明, 共掺杂体系的红移现象最为明显. 因此, N-F共掺杂可有效提高二氧化钛纳米管可见光的光催化性能.     

白光和红绿蓝光LED可调光源研制

为了提高LED光源色温和亮度的调节精度和准确度,结合色温由低向高变化时光色所呈现的渐变特点,提出了一种低色温白光LED灯珠、高色温白光LED灯珠加红绿蓝光LED灯珠补偿式调光的方法.将色温分成三个部分进行调节,每个部分选用不同的LED灯珠组合来进行调光.实验结果表明:不同组合情况下的LED光源的初始输出色温相对于目标值的偏差范围在1％以内;亮度可以在保证色温不变的情况下独立进行调节,初始输出值与目标值的偏差范围在1％以内;经过微调之后可以达到目标值;达到了色温和亮度独立调节的要求;光源发光稳定,不会因为长时间工作而影响调节精度.     

Visualization and interferometry for cylindrical and spherical sample tomography and profilometry

A technique combining image processing and laser interferometry for visualizing and detecting the deformation of transparent cylindrical and spherical sample is proposed. This deformation includes geometric deformation such as volume transition in profilometry and physical deformation such as refractive index change in tomography. Phase contour lines are used for quantitative analysis and graphical representation of the deformation. This method allows us to visually detect the spatial variation of the deformation field and to evaluate the test quality such as misalignment of optical system. A theoretical analysis using phase contour map to characterize the deformation field is described in detail. A method using phase contour map to qualify the interferometric test is proposed. Analysis of test examples is carried out. Suggestions on using phase contour line method to ameliorate test system design are finally discussed.     

Quantum and Classical Disparity and Accord

Discrepancies and accords between quantum (QM) and classical mechanics (CM) related to expectation values and periods are generally found for both the harmonic oscillator (SHO) and a free particle in a box (FPB), which may apply generally. These indicate non-locality is expected throughout QM. The FPB energy states violate the Correspondence Principle. Previously unexpected accords are found and proven that 〈x ²〉 _CM =〈x ²〉 _QM and τ _CM =τ _QMb (beat period i.e. beats between the phases for adjoining energy states) for the SHO for all quantum numbers, n. However, for the FPB the beat periods differ at small n. It is shown that a particle’s velocity in an infinite square well varies, no matter how wide the box, nor how far the particle is from the walls. The quantum free particle variances share an indirect commonality with the Aharonov-Bohm and Aharonov-Casher effects in that there is a quantum action in the absence of a force. The concept of an “Expectation Value over a Partial Well Width” is introduced. This paper raises the question as to whether these inconsistencies are undetectable, or can be empirically ascertained. These inherent variances may need to be fixed, or nature is manifestly more non-classical than expected.     

黑克、布劳、及伯曼-温采尔代数的诱导及分导系数和量子经典李代数的耦合与重新耦合系数

本文总结了计算黑克、布劳、及伯曼 温采尔代数在各种工数链下诱导及分导系数的线性方程方法(LEM)。特别强调了关于A,B,C,D型李代数及其量子情形与其中心代数之间的舒尔 魏尔 布劳双关性关系。这一关系使我们能够利用相应中心代数的诱导及分导系数计算出经典李代数及其量子情形的耦合与重新耦合系数。讨论了从该方法得到B,C,D型李代数不可约表示克罗内克积分解的应用。基于LEM还得到了处理对应于置换群CG系列问题的黑克代数张量积的方法。     

Rapid and flexible laser marking and engraving of tilted and curved surfaces

We present a novel method for rapid and flexible laser marking and engraving of tilted, curved and freeform work-piece surfaces. The method is based on integrating a three-dimensional (3D) laser measurement system into a 3D laser marking system. We use the same laser source and optics for measurement and processing with a minimum of additional hardware components. A low power CW laser regime is used to measure the 3D shape of a work-piece surface while a high-peak power-pulsed laser regime is used for processing. The acquired 3D surface data are used to determine the 3D trajectory of the processing beam focus. Neither the 3D shape of the work-piece nor its orientation needs to be known in advance as long as the processed surface lies within the working range of the 3D laser processing system. This eliminates the need for exact work-piece positioning before processing and substantially improves processing flexibility (allowing, e.g. variations in work-piece shape or/and orientation from mark to mark). This paper discusses key issues concerning an implementation of the method and presents typical examples of markings and engravings, which demonstrate the advantages of the method with respect to the existing industrial 2D and 3D laser marking and engraving methods. The method can also be applied to flexible laser structuring and microprocessing of curved surfaces.     

国外超导材料技术研究政策和方向

超导材料技术是21世纪具有战略意义的高新技术,极具发展潜力和市场前景。世界各发达国家纷纷制定研发计划,给予高度重视和大力支持,加快超导材料技术的基础研究和产业化发展。主要从美国、日本、欧洲国家、韩国等国家的相关研发计划、政策以及主要科研机构的研发概况出发,阐明目前国外超导材料技术的研究政策和方向。     

Spectroscopy and Photophysics of Iso- and Alloxazines: Experimental and Theoretical Study

We present a systematic study of the effect of methyl substitution on iso- and alloxazines in acetonitrile solutions. Substitution patterns have profound effects on both spectral and photophysical properties, with fluorescence quantum yields varying by more than an order of magnitude. TD-DFT calculation were used for the first time to correlate electronic structure changes with the substitution patterns, with good agreement between calculated and theoretical band positions and oscillator strengths. Both n-pi* and pi-pi* states in these compounds are predicted, with the oscillator strengths indicating that only the pi-pi* states should be observable in the absorption spectra. Substitution patterns are shown to be responsible for energy order inversion between these states.     

Nano and micro-scale fluid and plasma dynamics: present and future applications

In this letter, we illustrate the importance of fluid dynamics research by considering two particular areas of study: nano- and micro-scale fluid and plasma dynamics. We show how improved scientific knowledge of nano- and micro-fluid dynamics can significantly enhance our future. Application is also discussed regarding environmental aspects.     

Divergence- and Curl-Preserving Prolongation and Restriction Formulas

We present new second-order prolongation and restriction formulas which preserve the divergence and, in some cases, the curl of a discretized vector field. The formulas are suitable for adaptive and hierarchical mesh algorithms with a factor-of-2 linear resolution change. We examine both staggered and collocated discretizations for the vector field on two- and three-dimensional Cartesian grids. The new formulas can be used in combination with numerical schemes that require a divergence-free solution in some discrete sense, such as the constrained transport schemes of computational magnetohydrodynamics. We also obtain divergence-preserving interpolation functions which may be used for streamline or field line tracing.