Growth and characterization of pine-needle-shaped GaN nanorods by sputtering and ammoniating process

Pine-needle-shaped GaN nanorods have been successfully synthesized on Si(111) substrates by ammoniating Ga₂O₃/Nb films at 950 ^°C in a quartz tube. The products are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and field-emission transmission electron microscope (FETEM). The results show that the pine-needle-shaped nanorods have a pure hexagonal GaN wurtzite with a diameter ranging from 100 to 200 nm and a length up to several microns. The photoluminescence spectra (PL) measured at room temperature only exhibit a strong emission peak at 368 nm. Finally, the growth mechanism of GaN nanorods is also briefly explored.     

Fabrication, morphology, and photoluminescence properties of GaN nanowires and nanorods by ammoniating Ga2O3/V films on Si(1 1 1)

GaN nanowires and nanorods have been successfully synthesized on Si(1 1 1) substrates by magnetron sputtering through ammoniating Ga₂O₃/V films at 900 °C in a quartz tube. X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and photoluminescence (PL) spectrum were carried out to characterize the structure, morphology, and photoluminescence properties of GaN sample. The results show that the GaN nanowires and nanorods with pure hexagonal wurtzite structure have good emission properties. The growth direction of nanostructures is perpendicular to the fringes of (1 0 1) plane. The growth mechanism is also briefly discussed.     

Fabrication,morphology and optical properties of GaN nanorods by ammoniating Ga2O3/Nb films

Wurtzite GaN nanorods have been successfully synthesized on Si(111) substrates through ammoniating Ga₂O₃/Nb films under flowing ammonia atmosphere at 950 ^°C in a quartz tube. The nanorods have been confirmed as hexagonal wurtzite GaN by X-ray diffraction (XRD) and selected-area electron diffraction (SAED). Scanning electron microscopy (SEM) and field-emission transmission electron microscope (FETEM) reveal that the nanorods are straight and uniform, with a diameter of ranging from 100 to 200 nm and lengths up to several microns. The photoluminescence spectra (PL) measured at room temperature only exhibit a strong emission peak at 368.5 nm. Finally, the growth mechanism of GaN nanorods is also briefly discussed.     

High-quality GaN nanowires synthesized using a CVD approach

High-quality GaN nanowires were synthesized on a large-area Si substrate by direct reaction of gallium with ammonia using InCl₃ as a catalyst. The morphology and microstructure of the resulting products were characterized using a field-emission scanning electron microscope (SEM), a high-resolution transmission electron microscope, and X-ray diffraction (XRD). XRD and electron diffraction revealed that the nanowires are of a hexagonal GaN phase with the wurtzite structure. The SEM study showed that the nanowires are straight and have a smooth morphology with lengths up to 500 μm. The present results reveal that InCl₃ is an optimal catalyst in GaN nanowire production. Received: 2 April 2002 / Accepted: 12 April 2002 / Published online: 19 July 2002     

Synthesis and characterization of GaN nanowires

In this work, GaN nanowires were fabricated on Si substrates coated with NiCl₂ thin films using chemical vapor deposition (CVD) method by evaporating Ga₂O₃ powder at 1100 °C in ammonia gas flow. X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscope (HRTEM) and photoluminescence (PL) spectrum are used to characterize the samples. The results demonstrate that the nanowires are single-crystal GaN with hexagonal wurtzite structure. The growth mechanism of GaN nanowires is also discussed.     

Synthesis and characterization of GaN nanowires by ammoniating Ga2O3/Cr thin films deposited on Si(1 1 1) substrates

GaN nanowires have been successfully synthesized on Si(1 1 1) substrates by magnetron sputtering through ammoniating Ga₂O₃/Cr thin films at 950 °C. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), FT-IR spectrophotometer, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (TEM), and photoluminescence (PL) spectrum were carried out to characterize the microstructure, morphology, and optical properties of GaN samples. The results demonstrate that the nanowires are single-crystal GaN with hexagonal wurtzite structure and high-quality crystalline, have the size of 30-80 nm in diameter and several tens of microns in length with good emission properties. The growth direction of GaN nanowires is perpendicular to the fringe of (1 0 1) plane. The growth mechanism of GaN nanowires is also discussed in detail.     

Growth and characterization of GaN nanorods through ammoniating process by magnetron sputtering on Si(111) substrates

GaN nanorods have been successfully synthesized on Si(111) substrates by magnetron sputtering through ammoniating Ga₂O₃/ZnO films at 950 °C in a quartz tube. The GaN nanorods are characterized by X-ray diffraction, scanning electron microscopy, field-emission transmission electron microscopy, X-ray photoelectron spectroscopy and fluorescence spectrophotometry. The results show that the nanorods have a pure hexagonal GaN wurtzite structure with lengths of about several micrometers and diameters of about 200 nm, and the growth direction of the GaN nanorods is parallel to the (101) plane. The photoluminescence spectrum indicates that the nanorods have a good emission property. Finally, the growth mechanism is also briefly discussed. PACS 61.46.+w; 78.55.Cr; 81.15.Cd; 81.07.-b; 82.30.Hk     

Synthesis of aligned GaN nanorods on Si (111) by molecular beam epitaxy

Straight and well-aligned GaN nanorods have been successfully synthesized by molecular beam epitaxy (MBE) method. The GaN nanorods have been characterized by field-emission scanning electron microscopy (FE-SEM) equipped with energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), transmission electron microscopy (TEM) and selected area electron diffraction (SAED). SEM images show that GaN nanorods are constituted with two parts of which shapes are different from each other. The upper part of the nanorod is very thin and its lower part is relatively thick. The XRD and EDS analysis have identified that the nanorods are pure hexagonal GaN with single crystalline wurtzite structure. The TEM images indicate that the nanorods are well crystallized and nearly free from defects. The XRD, HRTEM, and SAED pattern reveal that the growth direction of GaN nanorods is 〈0001〉. The photoluminescence (PL) spectra indicate the good emission property for the nanorods. Finally, we have demonstrated about the two-step growth of the nanorods. PACS 81.07.Bc; 81.05.Ea; 81.15.Hi     

Temperature controlled synthesis of SrCO3 nanorods via a facile solid-state decomposition rout starting from a novel inorganic precursor

Strontium carbonate nanorods have been successfully synthesized via solid-state decomposition of a new precursor, [Sr(Pht)(H₂O)₂]. The obtained nanorods were found to be orthorhombic with the length of 70-100 nm and the diameter of about 10-15 nm. The Effect of calcinations temperature on morphology and purity of the products has been investigated. Strontium carbonate nanorods were formed at 500 °C. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infrared (FT-IR) spectroscopy. In addition, further evidence for the purity and stoichiometry of the product was obtained by XPS (X-ray photoelectron spectroscopy) spectrum.     

Al2O3-Y2O3-ZrO2三相复合陶瓷的介电谱研究

采用传统的固相反应法,在1400–1500 ℃下烧结,制备得到Al₂O₃-Y₂O₃-ZrO₂三相复合陶瓷.样品的结构、形貌和电性能分别用X射线衍射(XRD)、扫描电子显微镜(SEM)及介电谱表征.XRD表明此三相复合体系无其他杂相,加入Y₂O₃及ZrO₂后使得Al₂O₃成瓷温度降低;SEM表明此体系晶粒直径为200–500 nm,并且样品随烧结温度的升高而变得更加致密,晶界更加清晰;介电损耗谱中出现峰值弛豫现象,根据Cole-Cole复阻抗谱得出其为非德拜弛豫. 关键词： 2O₃-Y₂O₃-ZrO₂三相陶瓷')" href="#">Al₂O₃-Y₂O₃-ZrO₂三相陶瓷 介电弛豫 阻抗谱 热导率     

Fabrication of porous BaSnO3 hollow architectures using BaCO3@SnO2 core-shell nanorods as precursors

We present a strategy to synthesize porous BaSnO₃ hollow architectures with that were 150-300 nm in diameter and 1.5-5 μm in length using precursor of BaCO₃@SnO₂ nanorods prepared by hydrothermal treatment. BaCO₃@SnO₂ nanorods, consisting of a BaCO₃ core and a SnO₂ shell, could be used effectively for the solid-state synthesis of polycrystalline BaSnO₃ powder at 800 °C (lower than convention for BaCO₃ and SnO₂ mixtures). The core/shell structure of the precursor could play a role as a structural directing template for preparing BaSnO₃ hollow architectures during the calcination process. The X-ray diffractometer (XRD), scanning electron microscope (SEM), and transmission electron microscope (TEM) are employed to characterize the structures and morphologies. When applied to DSSC, the porous BaSnO₃ hollow architectures exhibit distinct photovoltaic effect.     

Synthesis and characterization of Co3O4 nanorods by thermal decomposition of cobalt oxalate

Cobalt oxalate was used as a precursor to prepare Co₃O₄ nanorods by thermal decomposition. The combinations of triphenylphosphine and oleylamine were added as surfactants to control the morphology of the particles. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS). The diameters of Co₃O₄ nanorods are 20 nm and the average lengths are around 500 nm. The hysteresis loops of the obtained samples reveal the ferromagnetic behaviors, the enhanced coercivity (H_c) and decreased saturation magnetization (M_s) in contrast to their respective bulk materials. The study provides a simple and efficient route to synthesize Co₃O₄ nanorods at low temperature.     

Synthesis of large-scale GaN nanowires by ammoniating Ga2O3 films on Co layer deposited on Si（111） substrates

A mass of GaN nanowires has been successfully synthesized on Si（111） substrates by magnetron sputtering through ammoniating Ga2O3/Co films at 950℃. X-ray diffraction, scanning electron microscopy, high resolution transmission electron microscope and Fourier transformed infrared spectra are used to characterize the samples. The results demonstrate that the nanowires are of single-crystal GaN with a hexagonal wurtzite structure and possess relatively smooth surfaces. The growth mechanism of GaN nanowires is also discussed.     

Synthesis of single crystalline GaN nanoribbons on sapphire (0001) substrates

Single crystalline GaN nanoribbons were synthesized through nitriding Ga₂O₃ thin films deposited on sapphire (0001) substrates by radio frequency magnetron sputtering. The component and structure of nanoribbons were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). The flat and smooth ribbon-like nanostructures are high quality single crystalline hexagonal wurtzite GaN. The thickness and width-to-thickness ratio of the grown GaN nanoribbons are in the range of 8-15 nm and ∼5-10, respectively.     

Synthesis and characterization of GaN nanowires by a catalyst assisted chemical vapor deposition

GaN nanowires have been fabricated on Si(1 1 1) substrates by chemical vapor deposition (CVD) method with NiCl₂ as catalyst and their compositions, microstructures, morphologies and light emitting properties were characterized by X-ray diffraction (XRD), FT-IR spectrophotometer (FTIR), scanning electron microscope (SEM), high-resolution transmission electron microscope (HRTEM), Raman spectroscopy and photoluminescence (PL). The results demonstrate that the nanowires are single-crystal GaN with hexagonal wurtzite structure and high crystalline quality, having the size of 20-50 nm in diameter and several tens of microns in length with some nano-droplets on their tips, which reveals that the growth mechanism of GaN nanowires agrees with vapor-liquid-solid (VLS) process. Five first-order Raman active phonon bands move to low shift and A₁(TO), E₁(TO), and E₂ (high) bands are overlapped and broaden, which is caused by uncertainty in the phonon wave vector. Five non-first-order active Raman phonons also appear, which is caused by the small dimension and high surface disorder degree. A blue-shift of the band-gap emission occurs due to quantum confinement effect.     

Controlled synthesis and luminescence properties of LaPO4:Eu phosphors

Uniform single crystal LaPO₄ phosphors were selectively synthesized using a facile hydrothermal method without the aid of templates or catalysts. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), and photoluminescence (PL) spectra were used to characterize the nanocrystal materials. The morphological evolution from nanorods to nanoparticles was brought about by altering the pH. In addition, the crystal structure was changed from hexagonal phase to monoclinic one by increasing the hydrothermal temperature. We propose a possible growth mechanism for LaPO₄ nanorods based on the results of our analyses. Furthermore, we compared the photoluminescence properties of LaPO₄:Eu with different morphologies. The results showed that the fluorescence intensity of monoclinic LaPO₄:Eu nanorods is stronger than that of nanoparticles.     

Preparation and spectroscopic properties of Nb2O5 nanorods

Nb₂O₅ nanorods have been prepared using water/ethanol media. The samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-visible absorption and photoluminescence spectroscopy. The as-prepared Nb₂O₅ nanorods appeared to be single pseudohexagonal (TT-Nb₂O₅) phase. From the photoluminescence spectrum, two emission bands at 407 and 496 nm, respectively, were observed. The origin of the luminescence was discussed in detail.     

Hydrothermal preparation and characterization of Cd0.9Mn0.1S nanorods

Cd_0.9Mn_0.1S semiconductor nanorods were successfully prepared by the hydrothermal reaction of CdCl₂·2.5H₂O and MnCl₂·5H₂O with (NH₄)₂S in aqueous solution. Atomic absorption spectrometry (AAS) and energy dispersive spectroscopy (EDS) were used to determine the Mn contents of these complex nanorods. The samples were characterized by scanning electron microscopy (SEM-EDS), X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis absorption spectra, photoluminescence (PL) and compared with the undoped CdS nanorods. The results showed that nanostructured multiplex compounds with high aspect ratio were obtained via hydrothermal method. The products showed almost totally rod-like morphology with approximately identical diameter about 20 nm and the maximal length up to 200 nm.     

Growth of β-Ga2O3 nanorods by ammoniating Ga2O3/V thin films on Si substrate

This paper reports that/3-Ga2O3 nanorods have been synthesized by ammoniating Ga2O3 films on a V middle layer deposited on Si（111） substrates. The synthesized nanorods were confirmed as monoclinic Ga2O3 by x-ray diffraction,Fourier transform infrared spectra. Scanning electron microscopy and transmission electron microscopy reveal that the grown β-Ga2O3 nanorods have a smooth and clean surface with diameters ranging from 100 nm to 200 nm and lengths typically up to 2μm. High resolution TEM and selected-area electron diffraction shows that the nanorods are pure monoclinic Ga2O3 single crystal. The photoluminescence spectrum indicates that the Ga2O3 nanorods have a good emission property. The growth mechanism is discussed briefly.     

Influence of ammoniating temperature on Co-catalyzed GaN nanowires

GaN nanowires (NWS) were synthesized at different temperatures by ammoniating Ga₂O₃/Co films deposited on Si (111) substrate. X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscope (HRTEM), Fourier transformed infrared spectra (FTIR) and photoluminence (PL) spectra were used to characterize the influences of the ammoniating temperature on the morphology, crystallinity and optical properties of GaN NWS. Our results indicate that the samples are all of wurtzite structure and also show that the GaN NWS ammoniated at 950 °C have the best morphology and crystallinity with a single-crystalline structure, and at this temperature the PL spectrum with the strongest ultraviolet (UV) peak is observed. PACS 61.46.-w; 71.55.Eq; 81.15.Cd; 81.07.-b; 61.10.Nz