Synthesis and characterization of carbon nanotubes on carbon microfibers by floating catalyst method

In this paper, carbon nanotubes were synthesized on carbon microfibers by floating catalyst method with the pretreatment of carbon microfibers at the temperature of 1023 K, using C₂H₂ as carbon source and N₂ as carrier gas. The morphology and microstructure of carbon nanotubes were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). The composition of carbon nanotubes was determined by energy dispersive X-ray spectroscopy (EDX). The results showed that the surface of treated carbon microfibers was thickly covered by carbon nanotubes with diameters of about 50 nm. EDX image indicated that the composition of carbon nanotubes was carbon. In comparison with the sample grown on untreated carbon microfibers surface, it was found that after carbon microfibers were boiled in the solution of sulfur acid and nitric acid (VH₂SO₄:VHNO₃ = 1:3) and immersed in the solution of iron nitrate and xylene, carbon nanotubes with uniform density can be grown on carbon microfibers surface. Based on the results, we concluded that the pretreatment of carbon microfibers had great effect on the growth of carbon nanotubes by floating catalyst method.     

Synthesis and characterization of vanadium nanoparticles on activated carbon and their catalytic activity in thiophene hydrodesulphurization

Vanadium nanoparticles (∼7 nm) stabilized on activated carbon were synthesized by the reduction of VCl₃·3THF with K[BEt₃H]. This material was characterized by inductive coupled plasma-atomic emission spectroscopy (ICP-AES), high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) analyses. The catalytic performance of the carbon-supported vanadium was studied using thiophene hydrodesulfurization (HDS) as model reaction at 300 °C and P = 1 atm. The catalytic activity of the vanadium carbide phase on the activated carbon carrier was more significant than that of the reference catalysts, alumina supported NiMoS. The method proposed for the synthesis of such a catalyst led to an excellent performance of the HDS process.     

Hydrogen storage in sonicated carbon materials

The hydrogen storage in purified single-wall carbon nanotubes (SWNTs), graphite and diamond powder was investigated at room temperature and ambient pressure. The samples were sonicated in 5 M HNO₃ for various periods of time using an ultrasonic probe of the alloy Ti-6Al-4V. The goal of this treatment was to open the carbon nanotubes. The maximum value of overall hydrogen storage was found to be 1.5 wt %, as determined by thermal desorption spectroscopy. The storage capacity increases with sonication time. The sonication treatment introduces particles of the Ti alloy into the samples, as shown by X-ray diffraction, transmission electron microscopy, and chemical analysis. All of the hydrogen uptake can be explained by the assumption that the hydrogen is only stored in the Ti-alloy particles. The presence of Ti-alloy particles does not allow the determination of whether a small amount of hydrogen possibly is stored in the SWNTs themselves, and the fraction of nanotubes opened by the sonication treatment is unknown. Received: 18 December 2000 / Accepted: 18 December 2000 / Published online: 9 February 2001     

Selective hydrogenation of cinnamaldehyde to cinnamyl alcohol with carbon nanotubes supported Pt-Co catalysts

The Pt-Co catalysts supported on carbon nanotubes (CNTs) have been prepared by wet impregnation and the selective hydrogenation of cinnamaldehyde (CMA) to the corresponding cinnamyl alcohol (CMO) over the catalysts has been studied in ethanol at different reaction conditions. The results show that Pt-0.17 wt%Co/CNTs catalyst exhibits the highest activity and selectivity at a reaction temperature of 60 °C under a pressure of around 2.5 MPa, and 92.4% for the conversion of CMA and 93.6% for the selectivity of CMA to CMO, respectively. The selective hydrogenation for the CO double bond in CMA would be improved as increasing the H₂ pressure, and the selective hydrogenation for the CC double bond in CMA is enhanced as increasing the reaction temperature. In addition, these catalysts have also been characterized using transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDS), X-ray photoelectron spectroscopy (XPS), H₂-temperature programmed reduction (H₂-TPR) and H₂-temperature programmed desorption (H₂-TPD) techniques. The results show that Pt particles are dispersed more homogeneously on the outer surface of the nanotubes, while the strong interaction between Pt and Co would improve the increasing of activated hydrogen number because of the hydrogen spillover from reduced Pt⁰ onto CNTs and increase the catalytic activity and selectivity of CMA to CMO.     

Physico-chemical properties of titania nanotubes synthesized via hydrothermal and annealing treatment

Titania nanotubes are synthesized via hydrothermal treatment of TiO₂ powders in NaOH solution at 110 °C for 90 h, followed by annealing at 400 °C. The morphology of nanotubes is characterized by field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). Microscopic observations on the transformation process indicate that the nanotubes retain their shapes after the annealing process. The crystalline structure and composition are examined by X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDX). The results confirm the absence of impurity peaks and the crystal structure change from nanotubes to anatase phase after annealing treatment. The average specific surface area of the particles is probed using gas adsorption-desorption measurements. The prepared tubular samples exhibit greater specific surface areas and higher pore volumes than the precursor. Moreover, it is apparent that the hydrothermal treatment modifies the optical properties of the titania samples and red-shifts the UV absorption to a band gap energy of 3.04 eV after annealing treatment.     

A green synthetic approach to graphene nanosheets for hydrogen adsorption

A green and facile strategy of preparing graphene by reducing exfoliated graphite oxide (GO) with glucose was developed in this study. The as-prepared samples were characterized by X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and Atomic force microscopy (AFM). The characterization results indicated that the graphene sheets (GS) were of high quality with smooth surface, rich pore structure and few layer graphene. The samples have a BET specific surface area of 1205.8 m² g⁻¹ measured by N₂ adsorption at 77 K. The hydrogen storage capacity of 2.7 wt.% at 298 K and 25 bar demonstrated that the as-prepared graphene employing glucose as reductant is supposed to be a promising material with outstanding property for hydrogen storage.     

Quality improvement of single-walled carbon nanotubes by doping B in Fe/MgO catalyst

We demonstrate that the quality of the as-grown single-walled carbon nanotubes (SWCNTs) can be effectively improved by the addition of the B ingredient in the Fe/MgO catalyst. The as-grown SWCNTs were characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and Raman spectroscopy. The SWCNTs prepared by the pure Fe/MgO catalyst have relatively low graphite crystallinity and are coated by much amorphous carbon. The intensity ratio of the D- and G-bands (I_D/I_G) in Raman spectra is relatively high (0.098 for laser 532 nm and 0.075 for laser 785 nm). The SWCNTs grown from the Fe/MgO catalyst doped with 0.1 part of B have more regular graphite structure with little amorphous carbon. The I_D/I_G values reduced remarkably (0.041 for laser 532 nm and 0.040 for laser 785 nm). The effect would be attributed to the inhibitory action of the doped B on the formation of radical hydrocarbon species for the formation of SWCNTs.     

Preparation, characterization of Au (or Pt)-loaded titania nanotubes and their photocatalytic activities for degradation of methyl orange

TiO₂ nanotubes were prepared by hydrothermal method and Au (or Pt) was loaded on TiO₂ nanotubes by photodeposition method. The photocatalysts were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS) and N₂ adsorption technique, respectively. The photocatalytic properties of the samples were also investigated. The results show that TiO₂ nanotubes with uniform diameter were prepared, and they have specific surface areas over 400 m²/g. The specific surface areas of TiO₂ nanotubes decrease with the increasing of calcining temperature, and crystalline phase of TiO₂ in the wall of nanotubes was transformed from anatase into rutile phase in calcination process. The photocatalytic activities of TiO₂ nanotubes are higher than that of nanosized TiO₂, and the photocatalytic activities of TiO₂ nanotubes were enhanced after loading Au (or Pt). After irradiation for 40 min under a 300 W of middle-pressure mercury lamp (MPML), the degradation rate of methyl orange solution using the Au/TiNT-500 (or Pt/TiNT-500) as a catalyst can reach 96.1% (or 95.1%). On the other hand, Au-loaded sample has evident adsorption peak in visible range, indicating that Au-loaded TiO₂ nanotubes are hopeful to become visible light photocatalyst.     

Improving the surface properties of multi-walled carbon nanotubes after irradiation with gamma rays

The effects of gamma-irradiation on the modification of the surface and structure of multi-walled carbon nanotubes were studied. Gamma-irradiation affected the graphitization properties of functional groups, and decreased the diameter of multi-walled carbon nanotubes. The irradiated multi-walled carbon nanotubes with the absorbed dose of 100 kGy exhibited a larger specific surface area and microporous volume as compared with the other samples. The Raman spectroscopy and X-ray photoelectron spectroscopy showed that the interaction between the gamma-irradiation and the multi-walled carbon nanotubes with the absorbed dose of 150 kGy destroyed the nanostructure of carbons, leading to the formation of diamond-like structures and carbon oxides. In addition, gamma-irradiation with the absorbed dose of 100 kGy improved multi-walled carbon nanotubes graphitization and surface properties while at higher absorbed dose (150 kGy), it induced damaged structures (sp³ bonds and oxygen compositions).     

Catalytic activity of Fe, Co and Fe-Co-MCM-41 for the growth of carbon nanotubes by chemical vapour deposition method

Iron, cobalt and a mixture of iron and cobalt incorporated mesoporous MCM-41 molecular sieves were synthesised by hydrothermal method and used to investigate the rules governing their nanotube producing activity. The catalysts were characterised by XRD and N₂ sorption studies. The effect of the catalysts has been investigated for the production of carbon nanotubes at an optimised temperature 750 °C with flow rate of N₂ and C₂H₂ is 140 and 60 ml/min, respectively for a reaction time 10 min. Fe-Co-MCM-41 catalyst was selective for carbon nanotubes with low amount of amorphous carbon with increase in single-walled carbon nanotubes (SWNTs) yield at 750 °C. Formation of nanotubes was studied using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectroscopy. Transmission electron microscope and Raman spectrum was used to follow the quality and nature of carbon nanotubes formed and the graphitic layers and disordered band, which shows the clear evidence for the formation of SWNTs, respectively. The result propose that the diameter of the nanotubes in the range of 0.78-1.35 nm. Using our optimised conditions for this system, Fe-Co-MCM-41 showed the best results for selective SWNTs with high yield when compared with Fe-MCM-41 and Co-MCM-41.     

Sonochemical growth of antimony selenoiodide in multiwalled carbon nanotube

This paper presents, for the first time, the nanocrystalline, semiconducting antimony selenoiodide (SbSeI) grown in multi-walled carbon nanotubes (CNTs). It was prepared sonochemically using elemental Sb, Se, and I in the presence of ethanol under ultrasonic irradiation (35 kHz, 2.6 W/cm²) at 323 K for 3 h. The CNTs filled with SbSeI were characterized by using techniques such as powder X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis, high-resolution transmission electron microscopy, selected area electron diffraction, and optical diffuse reflection spectroscopy. These investigations exhibit that the SbSeI filling the CNTs is single crystalline in nature and in the form of nanowires. It has indirect allowed energy band gap E_gIf = 1.61(6) eV.     

Oxygen contaminants affecting on the electronic structures of the carbon nano tubes grown by rapid thermal chemical vapor deposition

Oxygen-related electronic structures of CNTs (carbon nanotubes) grown by rapid thermal chemical vapor deposition (RT-CVD) have been investigated by using partial electron yield near edge X-ray absorption spectroscopy (PEY-NEXAFS) and X-ray photoelectron spectroscopy (XPS). On the CNT surface with increased oxygen resulting from e-beam irradiation under the O₂ gas environment, C k-edge NEXAFS spectra showed an increase of the oxygen-related resonance peaks ranging from 287 to 289 eV whereas the sp² related peak at 285.4 eV was nearly unchanged. After the complete removal process of the oxygen atom on the surface by annealing the sample at 500 °C for 30 min, C K-edge spectra showed an abrupt decrease of the oxygen-related resonance peaks in 287-289 eV and an increase of the sp² related peak at 285.4 eV, indicating that the degree of crystallinity in the CNT sample was improved.     

From crystalline V2O5 to nanostructured vanadium oxides using aromatic amines as templates

Nanoneedles, nanorods of B-VO₂, and vanadium oxide nanotubes with high crystallinity were synthesized via a one-step hydrothermal treatment using crystalline V₂O₅ as a precursor and aromatic amines (C₆H₅-(CH₂)_n-NH₂ with n=0, 1, 3) as structure-directing templates. Samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), thermal analysis, nitrogen adsorption/desorption isotherms and infrared spectroscopy. Nanoneedles, 0.5-5 μm in length and about 50 nm in average diameter and VO₂(B) nanorods about 20-100 nm wide and up to 2.5 μm long, have been obtained. The inner and the outer diameters of the vanadium oxide nanotubes vary, respectively, between 15-25 and 70-100 nm with a length up to 4 μm.     

Growth of Y-junction bamboo-shaped CNx nanotubes on GaAs substrate using single feedstock

Nitrogen-doped Y-junction bamboo-shaped carbon nanotubes were synthesized by chemical vapor deposition of monoethanolamine/ferrocene mixture on GaAs substrate at 950 °C. The use of monoethanolamine as the C/N feedstock simplifies the experimental arrangement by producing ammonia during the growth process. The structure, morphology and graphitization of as-grown nitrogen-doped carbon nanotubes (CN_x) were examined by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectroscopy analysis. TEM analysis indicates that nanotubes have a bamboo-like structure. The nitrogen concentration on as-grown CN_x nanotube was found to be 7.8 at.% by X-ray photoelectron spectroscopy (XPS) analysis. XPS analysis also indicated that there are two different types of nitrogen atoms (pyridinic and graphitic) in these materials. The possible growth mechanism of formation of Y-junction CN_x nanotubes was briefly discussed. Field emission measurement suggested that as-grown CN_x nanotubes are excellent emitters with turn-on and threshold fields of 1.6 and 2.63 V/μm, respectively. The result indicated that monoethanolamine proves to be an advantageous precursor to synthesize Y-junction nitrogen-doped carbon nanotubes and such nanotubes might be an effective material to fabricate various field emission devices.     

Selective growth, characterization, and field emission performance of single-walled and few-walled carbon nanotubes by plasma enhanced chemical vapor deposition

Single-walled carbon nanotubes (SWCNTs) and few-walled carbon nanotubes (FWCNTs) have been selectively synthesized by plasma enhanced chemical vapor deposition at a relative low temperature (550 °C) by tuning the thickness of iron catalyst. The parametric study and the optimization of the nanotube growth were undertaken by varying inductive power, temperature, catalyst thickness, and plasma to substrate distance. When an iron film of 3-5 nm represented the catalyst thickness for growing FWCNT arrays, SWCNTs were synthesized by decreasing the catalyst thickness to 1 nm. The nanotubes were characterized by field emission scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. Electron field emission properties of the nanotubes indicate that the SWCNTs exhibit lower turn-on field compared to the FWCNTs, implying better field emission performance.     

Hot filament CVD of Fe-Cr catalyst for thermal CVD carbon nanotube growth from liquid petroleum gas

A hot filament chemical vapor deposition (HFCVD) method was used to prepare Fe-Cr thin film on Si substrate. The produced layers were used as catalysts for growing carbon nanotubes (CNTs) from liquid petroleum gas (LPG) at 825 °C by thermal CVD (TCVD) method. To characterize the obtained catalysts or CNTs, X-ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Raman spectroscopy were used. CNTs were grown on HFCVD derived Fe-Cr catalyst with the LPG as carbon source successfully. It was found that an annealing process on catalysts enhances the surface concentration of Cr atoms and reduces the sizes of catalyst particles. The grown CNTs on annealed sample were morphologically denser with smaller diameters compared to the as deposited one. In addition, the effect of filament temperature on CNTs was investigated. By increasing the filament temperature from 850 to 1050 °C the surface density and diameters of CNTs were improved.     

Selective growth of carbon nantoubes on SiO2/Si substrate

Three-step raising temperature process was employed to fabricate carbon nanotubes by pyrolysis of ferrocene/melamine mixtures on silica and single crystalline silicon wafers respectively. Then the morphologies, structures and compositions of obtained carbon nanotubes are investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscope (EDX) and electron energy-loss spectroscopy (EELS). TEM and SEM observation shows that on silica substrate, high-oriented carbon nanotube can grow compactly to form continuous film on both frontal and cross-section surfaces, but on silicon substrate, only can form on cross-section surface. These carbon nanotubes have much irregular cup-like structure, and with outer diameter varying from 25 nm to 35 nm. At the top end of carbon nanotube there is a catalyst particle. EDX analysis reveals that the particle are iron cluster, and EELS spectrum indicates that the nanotube is composed of pure carbon. Finally, the effect of substrate surface roughness on the growth behavior of carbon nanotubes has been discussed.     

Surface modification of HMS material with silica sol leading to a remarkable enhanced catalytic performance of Cu/SiO2

Cu/SiO₂ catalysts with different bimodal pore structures adjusted by the ratio of HMS and silica sol were prepared via modified impregnation method. Structure evolutions of the catalyst were systematically characterized by N₂-physisorption, X-ray diffraction, H₂ temperature-programmed reduction, N₂O titration and X-ray photoelectron spectroscopy. The results show that the composite silica supported copper catalysts showed remarkably enhanced catalytic performance in the selective hydrogenation of dimethyl oxalate to ethylene glycol compared to the individual silica supported ones obtained by the same method. The dimethyl oxalate conversion and the ethylene glycol selectivity can reach 100% and 98% at 473 K with 2.5 MPa H₂ pressure and 1.5 h⁻¹ liquid hour space velocity of dimethyl oxalate over the optimized Cu/SiO₂ catalyst. The remarkably enhanced catalytic performance of Cu/SiO₂ catalysts might be attributed to the homogeneous dispersion and uniformity of the active copper species and to the larger copper surface areas attained on the HMS supports with large pore diameters and surface areas.     

High-field electron emission of carbon nanotubes grown on carbon fibers

Carbon nanotubes with uniform density were synthesized on carbon fiber substrate by the floating catalyst method. The morphology and microstructure were characterized by scanning electron microscopy and Raman spectroscopy. The results of field emission showed that the emission current density of carbon nanotubes/carbon fibers was 10 μA/cm² and 1 mA/cm² at the field of 1.25 and 2.25 V/μm, respectively, and the emission current density could be 10 and 81.2 mA/cm² with the field of 4.5 and 7 V/μm, respectively. Using uniform and sparse density distribution of carbon nanotubes on carbon fiber substrate, the tip predominance of carbon nanotubes can be exerted, and simultaneously the effect of screening between adjacent carbon nanotubes on field emission performance can also be effectively decreased. Therefore, the carbon nanotubes/carbon fibers composite should be a good candidate for a cold cathode material.     

Synthesis of a composite consisting of carbon nanotubes and graphite shell-encapsulated cobalt nanoparticles using plasma-enhanced chemical vapor deposition

We report a simple and effective one-step synthesis route for synthesizing a composite consisted of carbon nanotubes (CNTs) and graphite shell-encapsulated cobalt nanoparticles using plasma-enhanced chemical vapor deposition on Si (1 0 0) substrate covered with catalyst Co particles, discharging a mixture of H₂ and CH₄ gas, and characterize the obtained composite by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscope, and X-ray photoelectron spectroscopy. The results show that CNTs align perpendicularly to the substrate and graphite shell-encapsulated Co nanoparticles clung to the external surfaces of aligned CNTs. The diameter of the graphite shell-encapsulated Co nanoparticles increases with increasing the H₂ content in H₂ and CH₄ carbonaceous gas. A possible growth mechanism of the CNTs and graphite shell-encapsulated cobalt nanoparticles composite has been explored.