Atomic force microscopy and transmission electron microscopy of biocompatible magnetic fluids: A comparative analysis

The present study provides a comparative analysis of the size dispersity of magnetic nanoparticles (MNPs) within magnetic fluids as obtained from atomic force microscopy (AFM) and transmission electron microscopy (TEM). Whereas the mean particle diameter obtained from the AFM data presented a reduction of about 34% as compared to the value obtained from the TEM data, the standard deviation obtained from the AFM data is twice the value found from the TEM data. Similarities and differences in the size dispersity parameters are discussed in terms of sample preparation and tip characteristics. A two-dimensional mode for the deposition of the MNPs on top of the mica substrate is discussed as well.     

Magnetic/non-magnetic nanoparticles films with peculiar properties produced by ultrashort pulsed laser deposition

Films of magnetic nanoparticles uniformly mixed with non-magnetic nanoparticles have been produced by ultrashort pulsed laser deposition. These films present innovative characteristics with respect to their counterparts produced by standard techniques, as for example nanosecond laser ablation or sputtering, due to the peculiar shape and preferential distribution of their constituent nanoparticles. In the present investigation, the difficult coalescence among the deposited nanoparticles, specific characteristic of the ultrashort pulsed laser deposition, is particularly stressed for what concerns its effect on the collective magnetic behaviour. In particular, we observed that, even for a significant fraction of magnetic particles, the films exhibit an unusual high remanent magnetization, together with relatively low values of saturation and coercive fields, showing a strong squareness of the hysteresis loops. In perspective, these nanogranular films appear very promising for potential application as permanent magnets and in magnetic recording.     

A comparison of ferromagnetic resonance and magneto optical Kerr effect on thin Fe films on InAs(001)

A combination of STM, SQUID magnetometry, FMR and MOKE is used to study the structural and magnetic properties of thin iron films grown on InAs(001) (4×2)/c(8×2). The different magnetic characterization methods of this paper allow measurements of the magnetic anisotropies in the saturated and non-saturated state. Here we show results of a SQUID/FMR investigation on a 12 monolayer thick Fe film. As expected, FMR measurements find a four-fold symmetry of the magneto crystalline anisotropy, but with an additional uniaxial contribution. The dependence of the remanence on the magnetization angle computed from the magnetic parameters obtained in the saturated state is compared to experimental remanence data measured using MOKE. Good agreement is found. The InAs-substrate quality prior to growth, the nucleation behavior and the thickness-dependent granular structure of the Fe-layer are studied with STM. The origin of the magnetic anisotropies is discussed in terms of these structural data.     

Mo/Si多层膜小角X射线衍射结构表征

为了实现对Mo/Si多层膜的结构表征,测量了多层膜样品的小角X射线衍射谱。介绍了小角X射线衍射谱的分析方法,包括Bragg峰值拟合法,傅里叶变换法,反射谱拟合法。Bragg峰值拟合法和反射谱拟合法得到多层膜的周期厚度为7.09nm,两种模型的反射谱拟合法得到界面的粗糙度(扩散长度)为0.40～0.41nm(Si在Mo上),0.52～0.70nm(Mo在Si上),前者要比后者小,这与透射电镜法(TEM)得到的结果0.40nm(Si在Mo上),0.6～0.65nm(Mo在Si上)是一致的。通过基于扩散模型的反射谱拟合法得到的折射率剖面也与由高倍率透射电镜(HRTEM)积分得到的灰度值剖面在趋势上是一致的。通过X射线衍射谱和TEM图像对Mo/Si多层膜进行综合表征,得到了多层膜的精细结构信息,这对多层膜制备工艺的优化具有十分重要的意义。     

Quantification of magnetic domain disorder and correlations in antiferromagnetically coupled multilayers by neutron reflectometry

The in-plane correlation lengths and angular dispersion of magnetic domains in a transition metal multilayer have been studied using off-specular neutron reflectometry techniques. A theoretical framework considering both structural and magnetic disorder has been developed, quantitatively connecting the observed scattering to the in-plane correlation length and the dispersion of the local magnetization vector about the mean macroscopic direction. The antiferromagnetic domain structure is highly vertically correlated throughout the multilayer. We are easily able to relate the neutron determined magnetic domain dispersion to magnetization and magnetoresistance experiments.     

Preparation and Characterization of Polypyrrole/Ferrospinel Nanocomposite by W/O Microemulsion Pathway

A polypyrrole/ferrospinel(NiFe₂O₄) nanocomposite was prepared by the in situ chemical oxidizing of pyrrole in the presence of NiFe₂O₄ nanoparticles in water-in-oil (w/o) microemulsion. The structural, morphological, and magnetic properties of the as-prepared polypyrrole/NiFe₂O₄ nanocomposite were characterized by X-ray diffraction (XRD), Fourier transform infrared spectra, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and magnetic measurements. XRD and FTIR revealed the presence of NiFe₂O₄ in the nanocomposite. SEM and TEM images illustrated that polypyrrole was coated on the NiFe₂O₄ surface. The electromagnetic parameters, such as conductivity, saturation magnetization, and coercivity of NiFe₂O₄ nanoparticles varied after coating with polypyrrole.     

Imaging the Magnetic Reversal of Isolated and Organized Molecular‐Based Nanoparticles using Magnetic Force Microscopy

In the race towards miniaturization in nanoelectronics, magnetic nanoparticles (MNPs) have emerged as potential candidates for their integration in ultrahigh‐density recording media. Molecular‐based materials open the possibility to design new tailor‐made MNPs with variable composition and sizes, which benefit from the intrinsic properties of these materials. Before their implementation in real devices is reached, a precise organization on surfaces and a reliable characterization and manipulation of their individual magnetic behavior are required. In this paper, it is demonstrated how molecular‐based MNPs are accurately organized on surfaces and how the magnetic properties of the individual MNPs are detected and tuned by means of low‐temperature magnetic force microscopy (LT‐MFM) with variable magnetic field. The magnetization reversal on isolated and organized MNPs is investigated; in addition, the temperature dependence of their magnetic response is evaluated.     

Colloidal Flower‐Shaped Iron Oxide Nanoparticles: Synthesis Strategies and Coatings

The assembly of magnetic cores into regular structures may notably influence the properties displayed by a magnetic colloid. Here, key synthesis parameters driving the self‐assembly process capable of organizing colloidal magnetic cores into highly regular and reproducible multi‐core nanoparticles are determined. In addition, a self‐consistent picture that explains the collective magnetic properties exhibited by these complex assemblies is achieved through structural, colloidal, and magnetic means. For this purpose, different strategies to obtain flower‐shaped iron oxide assemblies in the size range 25–100 nm are examined. The routes are based on the partial oxidation of Fe(OH)₂, polyol‐mediated synthesis or the reduction of iron acetylacetonate. The nanoparticles are functionalized either with dextran, citric acid, or alternatively embedded in polystyrene and their long‐term stability is assessed. The core size is measured, calculated, and modeled using both structural and magnetic means, while the Debye model and multi‐core extended model are used to study interparticle interactions. This is the first step toward standardized protocols of synthesis and characterization of flower‐shaped nanoparticles.     

原子尺度材料三维结构、磁性及动态演变的透射电子显微学表征

原子表征与操控是实现原子制造必须突破的物理瓶颈之一.像差校正电子显微学方法因其优异的空间分辨率,为实现原子精细制造提供了有力的表征手段.因此,利用电子显微学手段,在原子尺度对原子制造的材料及器件进行三维结构和性能的协同表征,对于深入理解原子水平材料操控的物理机理具有非常重要的意义.纳米团簇及纳米颗粒是原子制造材料与器件研究的主要对象之一,具有丰富的物理化学性质和较高的可操纵性.本文探讨纳米团簇/颗粒结构三维定量表征、使役条件下纳米团簇/颗粒结构演变定量表征、纳米颗粒/晶粒结构-成分-磁性协同定量表征等诸多方法与实例,阐明了电子显微学表征手段的突破和发展为实现精细控制的原子制造材料提供了坚实基础.     

Microwave properties and surface topography of softmagnetic films with high resistivity

A single layer of CoFeB and a multilayer of CoFeB--MgO films are prepared by means of DC/RF magnetron sputter deposition. The excellent microwave properties and high electrical resistivity are simultaneously achieved in the discontinuous multilayer structure of [Co₄₄Fe₄₄B₁₂(0.7nm)/MgO(0.4nm)]_{40} film. This film has a high permeability ({μ \prime }) (larger than 100 below 2.1GHz), a high magnetic loss (μ') (larger than 100 in a range from 1.5 to 3.3GHz), a resistivity of 3.3× 10^*     

Structural and magnetic properties of turmeric functionalized CoFe_2O_4 nanocomposite powder

The structural and magnetic properties of the synthesized pure and functionalized CoFe_2O_4 magnetic nanoparticles(NPs) are studied by analyzing the results from the x-ray diffraction(XRD), transmission electron microscopy(TEM), FT–IR spectroscopy, thermogravimetry(TG), and vibrating sample magnetometer(VSM). To extract the structure and lattice parameters from the XRD analysis results, we first apply the pseudo-Voigt model function to the experimental data obtained from XRD analysis and then the Rietveld algorithm is used in order to optimize the model function to estimate the true intensity values. Our simulated intensities are in good agreement with the experimental peaks, therefore, all structural parameters such as crystallite size and lattice constant are achieved through this simulation. Magnetic analysis reveals that the synthesized functionalized NPs have a saturation magnetization almost equal to that of pure nanoparticles(PNPs). It is also found that the presence of the turmeric causes a small reduction in coercivity of the functionalized NPs in comparison with PNP. Our TGA and FTIR results show that the turmeric is bonded very well to the surface of the NPs. So it can be inferred that a nancomposite(NC) powder of turmeric and nanoparticles is produced. As an application, the anti-arsenic characteristic of turmeric makes the synthesized functionalized NPs or NC powder a good candidate for arsenic removal from polluted industrial waste water.     

Janus Multicolored Photonic Crystal Beads for Real‐Time Magnetic Responsive Patterns

Photonic Janus particles that can change colors in different stimuli have shown great promise in various applications, such as optical probes, catalyst supports, sensors, and display materials. However, it remains a challenge to produce Janus structural colored particles with a simple method. Inspired from ecsenius bicolors, a facile preparation of Janus structural colored beads (JSCBs) using sub‐micrometer‐sized colloidal particles and magnetic nanoparticles composed of Fe₃O₄ is established. A mixed emulsion is prepared by monodispersed colloidal particles and magnetic nanoparticles and initiator of PDMS precursor. Subsequent self‐assembly of the emulsion in the room temperature environment provides two different structural colors, thanks to the gravity deposition of colloidal particles and Fe₃O₄ nanoparticles. The photonic bandgap of JSCBs can be precisely controlled with varying size of monodispersed colloidal nanoparticles, and the high optical quality and mechanical strength of the structural colored face are attributed to the existence of PDMS. In the presence of a magnet, the JSCBs can change their orientation simultaneously between two different structural colors. Moreover, the JSCBs are capable of encoding and angle‐independent displaying, which are crucial to their applications in anticounterfeiting, information coding, and pattern display.     

Field-and Current-Driven Magnetization Reversal and Dynamic Properties of CoFeB-MgO-Based Perpendicular Magnetic Tunnel Junctions

We report a perpendicular magnetic tunnel junction(p MTJ) cell with a tunnel magnetoresistance(TMR) ratio of nearly 200% at room temperature based on Co Fe B/Ta/Co Fe B as the free layer(FL) and a synthetic antiferromagnetic(SAF) multilayer [Pt/Co]/Ru/[Pt/Co]/Ta/Co Fe B as the reference layer(RL). The field-driven magnetization switching measurements show that the p MTJs exhibit an anomalous TMR hysteresis loop. The spin-polarized layer Co Fe B of SAF-RL has a lower critical switching field than that of FL. The reason is related to the interlayer exchange coupling(IEC) through a moderately thick Ta spacer layer among SAF-RLs, which generates a moderate and negative bias magnetic field on Co Fe B of RL. However, the IEC among RLs has a negligible influence on the current-driven magnetization switching of FL and its magnetization dynamics.     

Structural and magnetic studies on transition metal (Mn, Co) doped ZnO nanoparticles

We report on the structural and magnetic properties of the nanocrystalline samples of Zn_1−x(TM)_xO (TM=Mn, Co and x=0.02, 0.05, 0.10) synthesized by chemical vapor deposition (CVD) method using different carrier gases i.e., Argon (Ar), Oxygen (O₂) and Nitrogen (N₂). X-ray diffraction (XRD) and transmission electron microscopy (TEM) studies reveal wurtzite structure of pure ZnO in all the samples and particle sizes in the range of 15-40 nm. No evidence of any secondary phases having room temperature ferromagnetic behavior has been observed through XRD and TEM studies. Magnetic measurements reveal presence of mixed magnetic phases in the samples, which may be the reason for the low saturation magnetization in the nanoparticles.     

Synthesis and magnetic properties of Mn–Zn ferrite nanoparticles

Mn–Zn ferrite nanoparticles (Mn_1−xZn_xFe₂O₄) are synthesized by a hydrothermal precipitation approach using metal sulfate solution and aqueous ammonia. The analysis methods of XRPD, TEM, TGA, and VSM are used to characterize the magnetic nanoparticles. Through the characterization of the precipitated nanoparticles, the effects of the reacting component proportions and preparation techniques on the Curie temperature, the magnetization, and the size distribution of Mn–Zn ferrite nanoparticles are discussed. Furthermore, the Mn–Zn ferrite nanoparticles are used to prepare ferrofluid. Variation of the magnetic properties of the ferrite nanoparticles with the composition content x of Zn and the magnetic moment of the nanoparticles are discussed.     

Structural, static and dynamic magnetic properties of dextran coated γ-Fe(2)O(3) nanoparticles studied by (57)Fe NMR, M?ssbauer, TEM and magnetization measurements

The structural and magnetic properties and spin dynamics of dextran coated and uncoated γ-Fe(2)O(3) (maghemite) nanoparticles have been investigated using high resolution transmission electron microscopy (HRTEM), (57)Fe nuclear magnetic resonance (NMR), M?ssbauer spectroscopy and dc magnetization measurements. The HRTEM observations indicated a well-crystallized system of ellipsoid-shaped nanoparticles, with an average size of 10 nm. The combined M?ssbauer and magnetic study suggested the existence of significant interparticle interactions not only in the uncoated but also in the dextran coated nanoparticle assemblies. The zero-field NMR spectra of the nanoparticles at low temperatures are very similar to those of the bulk material, indicating the same hyperfine field values at saturation in accord with the performed M?ssbauer measurements. The T(2) NMR spin-spin relaxation time of the nanoparticles has also been measured as a function of temperature and found to be two orders of magnitude shorter than that of the bulk material. It is shown that the thermal fluctuations in the longitudinal magnetization of the nanoparticles in the low temperature limit may account for the shortening and the temperature dependence of the T(2) relaxation time. Thus, the low temperature NMR results are in accord with the mechanism of collective magnetic excitations, due to the precession of the magnetization around the easy direction of the magnetization at an energy minimum, a mechanism originally proposed to interpret M?ssbauer experiments in magnetic nanoparticles. The effect of the surface spins on the NMR relaxation mechanisms is also discussed.     

Quadrupole magnetic field-flow fractionation: A novel technique for the characterization of magnetic nanoparticles

Quadrupole magnetic field-flow fractionation (MgFFF) is an analytical separation and characterization technique for nano- and micro-sized magnetic particles. It fractionates particles according to their content of magnetite or other magnetic material. The potential and versatility of MgFFF for separation and characterization of magnetic nanoparticles, such as those used for immunospecific labeling of biological cells for magnetic separation, is demonstrated. A broadly polydisperse sample of dextran-coated magnetite nanoparticles was eluted under programmed field decay conditions, and quantitative data concerning the distribution of magnetite content were determined from the elution profile using a data reduction method.     

Dimensional analysis of aqueous magnetic fluids

A comparison of the synthesis and characterization of three aqueous magnetic fluids intended for biomedical applications is presented. Stable colloidal suspensions of iron oxide nanoparticles were prepared by a co-precipitation method with the magnetite cores being coated with β-cyclodextrin, tetramethylammonium hydroxide and citric acid. Rheological properties of the fluids were investigated, i.e. viscosity (capillary method) and surface tension (stalagmometric method) in correlation with their density (picnometric method). The dimensional distributions of the ferrophase particles physical diameter of these three magnetic fluids – revealed on the basis of transmission electron microscopy (TEM) data – as well as the diameter distributions of some other magnetic fluids presented in the literature, were comparatively analyzed using the box-plot statistical method. In order to extract complementary data on the magnetic diameter of an iron oxide core, magnetization measurements as well as X-ray diffraction pattern analysis were carried out. Interpretation of all the measurement data was accomplished by assessing the suitability of the three magnetic fluid samples from the viewpoint of their stability and biocompatibility. PACS 75.50.Mm; 61.46.Df; 68.37.Lp; 96.15.Pf; 75.75.+a     

Mössbauer study of Cu1−xZnxFe2O4 catalytic materials

In the present work, we have synthesized and characterized magnetic nanoparticles of maghemite γ-Fe₂O₃ to study their structural and magnetic properties. For the preparation, magnetite precursor, were oxidized by adjusting the pH = 3.5 at about 80 °C in an acid medium, The mean size of the maghemite particles calculated from the X-ray diffractogram was around 5.7 nm. Mössbauer spectroscopy measurements at room temperature show their superparamagnetic behavior. Furhermore, Mössbauer measurements were carried out at 77 K and 4.2 K in order to find the typical hyperfine fields of the maghemite. Magnetite phase was not found. FC and ZFC magnetization curves measured at 500 Oe indicate a blocking temperature of 105.3 K. The magnetization measurements also show almost zero coercivity at RT. TEM images show nanoparticles with diameter smaller than 10 nm, which are in good agreement with the X-ray pattern and the fitting of the magnetization data.     

Structural and magnetic study of swift heavy ion irradiated W/Fe multilayer structure

The present study reports the effect of swift heavy ion irradiation on structural and magnetic properties of sputtered W/Fe multilayer structure (MLS) having bilayer compositions of [W(10 Å)/Fe(20 Å)]_10BL. The MLS is irradiated by 120 MeV Au⁹⁺ ions of fluences 1×10¹³ and 4×10¹³ ions/cm². Techniques like X-ray reflectivity (XRR), cross-sectional transmission electron microscopy (X-TEM) and DC magnetization with a vibrating sample magnetometer (VSM) are used for structural and magnetic characterization of pristine and irradiated MLS. Analysis of XRR data using Parratt’s formalism shows a significant increase in W/Fe layer roughness. X-TEM studies reveal that intra-layer microstructure of Fe layers in MLS becomes nano-crystalline on irradiation. DC magnetization study shows that with spacer layer thickness interlayer coupling changes between ferromagnetic to antiferromagnetic.