共查询到19条相似文献,搜索用时 109 毫秒
1.
2.
3.
介绍了用恒流法自制仪器精确测定液体的黏度.该自制仪器,能有效地保证底部的密封性、液体水位恒定和可操作性.另外,还增设一个玻璃管连通器,并附加一根标尺和游标,可使液体水位的测量精确度提高.在接毛细管输出液体的量筒处加上光电计时,可使测量液体的流速的精确度提高.再将相关数据送入已编好程序的电子仪器进行计算并显示出黏度.另外该仪器可调换不同管径的毛细管,因此应用本方法能快速准确地测量多种液体的黏度. 相似文献
4.
5.
6.
7.
在毛细管法测定液体表面张力系数的实验中,利用被测液体导电的性质,在螺旋测微计的测微螺杆上沿轴线方向加装一根金属探针,通过电学方法探测毛细管内液面及容器内液面的位置,实现液体在毛细管内上升高度的测量.利用探针法分别测量了蒸馏水在几个不同温度下的毛细上升高度,利用瑞利公式计算表面张力系数.实验结果表明,探针法测量毛细上升高度的重复性好,所测得蒸馏水的表面张力系数与其公认值的百分误差约小于0.12%. 相似文献
8.
9.
本文提出了一种利用受激布里渊散射(SBS)能量反射率的变化测定不同温度时的液体介质运动黏度的方法.液体介质的运动黏度随温度而变化,这导致了介质增益系数和SBS能量反射率的变化,因此通过SBS能量反射率的变化可测定不同温度时的液体介质的运动黏度.在Countinuum Nd: YAG种子注入激光系统中测定了不同温度时的水的运动黏度并与运动黏度计测定的结果进行了比较.用本方法获得的不同温度时的水的运动黏度测量值与运动黏度计测量值很接近,相对误差小于5%.
关键词:
受激布里渊散射
SBS能量反射率
温度
运动黏度 相似文献
10.
11.
利用毛细管法测定水的粘度,探讨了毛细管两端不同压强差对水粘度测量的影响。结果表明不同压强差对测量粘度有一定的影响,压差的减小使测量结果的误差增大,与理论相符。 相似文献
12.
本文提出了一种测量液相扩散系数的新方法. 该方法用透明毛细管构成液相扩散池, 利用毛细管成像法特有的折射率空间分辨测量能力, 通过直接观察和记录扩散介质的等折射率薄层在毛细管中的移动规律, 基于扩散过程遵循的Fick第二定律计算出液相扩散系数. 在25 ℃下研究了丙三醇和纯水间的扩散过程, 扩散系数的测量值与全息干涉法的文献报道值之间的相对误差为4.47%, 论文同时分析了折射率测量精度和毛细管管壁黏滞力对扩散系数的影响. 用毛细管成像法测量液相扩散系数具有样品需要量少、测量速度快、系统稳定性好的特点, 为快速测定微量样品的扩散系数提供了一种有效的新方法.
关键词:
扩散系数
液体折射率
毛细管成像法 相似文献
13.
筛网通道式液体获取装置是低温推进剂在轨管理的关键技术之一,其中具有高蒸发速率的低温推进剂在金属筛网的毛细性能是影响筛网通道式液体获取装置工作性能的主要因素。以筛网通道式液体获取装置的常用金属筛网——荷兰斜纹编织网为研究对象,以乙醇和丙酮为工质,采用红外热像仪实验研究了在高蒸发率下易挥发工质在荷兰斜纹编织网经丝方向的毛细性能,通过分析经纬丝密度与工质种类对毛细性能的影响并结合毛细爬升理论模型,系统评价了荷兰斜纹编织网经丝方向的毛细性能,分析比较不同易挥发工质毛细性能参数,并与文献结果相对比,证实了所得到参数的准确性,为筛网通道式液体获取装置的设计提供了技术基础。 相似文献
14.
Yasuo Minami 《Applied physics. B, Lasers and optics》2014,117(3):969-972
Thermally excited capillary waves propagate everywhere on a liquid surface. The relationship between the frequency and wavelength of the capillary wave reflects the surface tension of the liquid, and the lifetime of the capillary wave reflects the shear viscosity of the liquid. By observing a capillary wave with inelastic light-scattering spectroscopy, we can obtain the surface tension and the viscosity from the frequency modulation of the light and the spectral width of the scattered light. In this study, we observed capillary waves on liquid metal using high-resolution spectroscopy, and successfully measured their properties in a non-contact manner. In the experiment, values were obtained at a frequency of about 20 kHz. The values were equivalent to those at 0 Hz, since the properties of liquid metals are constant at least in the frequency region from 0 to several tens of kilohertz. 相似文献
15.
Whether a thin filament of liquid separates into two or more droplets or eventually condenses lengthwise to form a single larger drop depends on the liquid's density, viscosity, and surface tension and on the initial dimensions of the filament. Surface tension drives two competing processes, pinching-off and shortening, and the relative time scales of these, controlled by the balance between capillary and viscous forces, determine the final outcome. Here we provide experimental evidence for the conditions under which a liquid filament will break up into drops, in terms of a wide range of two dimensionless quantities: the aspect ratio of the filament and the Ohnesorge number. Filaments which do not break up into multiple droplets demand a high liquid viscosity or a small aspect ratio. 相似文献
16.
本文采用去离子水和无水乙醇两种工质,利用微通道流动沸腾同步测量实验系统,研究了液膜厚度的瞬态变化规律,实验发现流动沸腾形成的初始液膜厚度在毛细数Ca很宽的范围内都遵循Taylor流动原理;液膜形成后,在蒸发和蒸汽流动携带的耦合作用下,厚度迅速减薄直至蒸干;由于水的汽液黏度比小,速度梯度小,剪切作用带来的液膜厚度减少量小,且水的汽化潜热大,吸收相同热量时蒸发量小,导致水的液膜厚度变化斜率较小,通过理论分析提出了沸腾液膜厚度变化的计算模型,计算结果与实验结果的误差小于20%。 相似文献
17.
18.
利用落塔的短时微重力条件, 实验研究了与容器连通的毛细管中的流体在微重力条件下的毛细流动过程, 并通过理论分析建立了相应的毛细管中弯月液面高度随时间变化的微分方程. 结果表明, 对于不同的接触角和不同的容器/毛细管参数, 由建立的理论公式得到的数值解结果都与实验结果在定量上较为一致. 此外, 实验中发现, 改变乙醇和去离子水混合液的比例可以明显地改变接触角参数, 但对毛细流动的影响很小, 建立的理论公式也对这一现象给出了合理的解释. 该研究对于预测和分析微流道及空间微重力条件下的毛细流动行为具有明显的应用价值. 相似文献
19.
An analytical expression of the second order of smallness in wave amplitude-to-wavelength ratio is derived for a horizontal flow arising in a finite-depth layer of a viscous liquid under the action of a periodic nonlinear capillary wave. It is found that the liquid flow is determined by the nonlinear component of the velocity field vortex part and the flow rate increases with increasing viscosity and decreasing wavelength irrespective of the layer thickness. In thin layers, the flow rate rapidly drops from its maximal value with increasing viscosity, wavelength, and surface charge density. If the liquid surface is charged, the horizontal liquid flow decreases rapidly as the surface charge density approaches the threshold of the Tonks-Frenkel instability. 相似文献