Forward and reverse electron transport properties across a CdS/Si multi-interface nanoheterojunction

The electron transport behavior across the interface plays an important role in determining the performance of op- toelectronic devices based on heterojunctions. Here through growing CdS thin film on silicon nanoporous pillar array, an untraditional, nonplanar, and multi-interface CdS/Si nanoheterojunction is prepared. The current density versus voltage curve is measured and an obvious rectification effect is observed. Based on the fitting results and model analyses on the forward and reverse conduction characteristics, the electron transport mechanism under low forward bias, high forward bias, and reverse bias are attributed to the Ohmic regime, space-charge-limited current regime, and modified Poole-Frenkel regime respectively. The forward and reverse electrical behaviors are found to be highly related to the distribution of inter- facial trap states and the existence of localized electric field respectively. These results might be helpful for optimizing the preparing procedures to realize high-performance silicon-based CdS optoelectronic devices.     

Preparation, structural and electrical properties of zinc oxide grown on silicon nanoporous pillar array

Polycrystalline thick film of zinc oxide (ZnO) is grown on a unique silicon substrate with a hierarchical structure, silicon nanoporous pillar array (Si-NPA), by using a vapour phase transport method. It is found that as-grown ZnO film is composed of closely packed ZnO crystallites with an average size of $\sim$10\,\mu$m. The film resistivity of ZnO/Si-NPA is measured to be $\sim$8.9\Omega\cdot$\,cm by the standard four probe method. The lengthwise $I$-$V$ curve of ZnO/Si-NPA heterostructure is measured. Theoretical analysis shows that the carrier transport across ZnO/Si-NPA heterojunction is dominated by two mechanisms, i.e. a thermionic process at high voltages and a quantum tunnelling process at low voltages.     

氧化锌/硅纳米孔柱阵列的结构和光致发光特性研究

以硅纳米孔柱阵列(Si-NPA)为衬底、用化学气相沉积法制备了具有规则阵列结构特征的ZnO/Si-NPA纳米复合体系，并对其结构和光致发光性质进行了表征. 实验结果显示，组成ZnO/Si-NPA表面阵列的每个柱子均呈现层壳结构. 不同于衬底Si-NPA的红光和蓝光发射，ZnO/Si-NPA在紫外光区和蓝绿光区呈现出两个强的宽发光峰. 分析表明，紫外光发射应归因于ZnO晶体的带边激子跃迁；而蓝绿光发射则来自于ZnO晶体本征缺陷所形成的两类深能级复合中心上载流子的辐射跃迁.     

银/硅纳米孔柱阵列活性基底的SERS效应研究

以硅纳米孔柱阵列(Si-NPA)为衬底,采用浸渍法制备出一种具有规则表面形貌特征的银/硅纳米孔柱阵列(Ag/Si-NPA),并以R6G为探测目标材料,对其表面增强拉曼(SERS)效应进行了研究。结果表明,对于R6G浓度低至10-15M,Ag/Si-NPA均能表现出清晰的特征SERS峰。随着浓度的降低,R6G的荧光淬灭,所测拉曼光谱的基线降低,但特征峰峰位基本保持不变。在低浓度10-15M时得到的SERS光谱,理论上证明为单分子光谱。此外,Ag/Si-NPA活性基底具有较好的稳定性,在长达28天的自然老化过程中,Ag/Si-NPA能够保持对R6G较高的探测水平,光谱具有较好的信噪比和分辨率。Ag/Si-NPA是一种理想的SERS活性基底。     

Microstructure and blue photoluminescence enhancement of silicon nanoporous pillar array embedded in ferroelectric barium strontium titanate

A silicon nanoporous pillar array (Si-NPA) with micrometer/nanometer hierarchical structure was fabricated by hydrothermal etching, followed by spin-coating barium strontium titanate (BST) on Si-NPA substrate. The photoluminescence (PL) spectra of the Si-NPA and BST/Si-NPA thin film were investigated. The emission band of freshly prepared Si-NPA located at 630 nm, and a blueshift at 425 nm as well as degradation in intensity after annealing at 600 °C for 1 h was observed, which might be explained by a quantum confinement effect model. BST ferroelectric material provided a static-electric field and induced the excited carriers in Si-NPA to migrate toward the opposite direction and recombine in an interfacial oxide layer. Therefore, BST enhanced blue emission of Si-NPA as well as passivated Si-NPA.     

Electronic band structure and optical properties of silicon nanoporous pillar array

Silicon nanoporous pillar array (Si-NPA) is fabricated by hydrothermally etching single crystal silicon (c-Si) wafers in hydrofluoric acid containing ferric nitrate. Microstructure studies disclosed that it is a typical micron/nanometer structural composite system with clear hierarchical structures. The optical parameters of Si-NPA were calculated by general light-absorption theory and Kramers–Kronig relations based on the experimental data of reflectance and the variations compared with the counterparts of c-Si were analyzed. The features of the electronic band structure deduced from the optical measurements strongly indicate that Si-NPA material is a direct-band-gap semiconductor and possesses separated conduction sub-bands which accords with conduction band splitting caused by silicon nanocrystallites several nanometers in size. All these electronic and optical results are due to the quantum confinement effect of the carriers in silicon nanocrystallites.     

Excitation mechanisms and localization sites of erbium-doped porous silicon

Porous silicon (PS) is doped with erbium by electrochemical anodisation. The penetration of erbium into the PS layer is confirmed by Rutherford backscattering spectroscopy (RBS) and energy dispersive X-ray (EDX) measurements. Efficient green and infrared emissions were observed at room temperature. The investigations are focused on the evolutions versus temperature and pump intensity of the green photoluminescence (PL) corresponding to the ⁴S_3/2 → ⁴I_15/2 transition. It was found that an erbium related level defect can be involved on the excitation and emission processes of erbium. Pump intensity dependent PL studies revealed that for the electrochemical incorporation, most of the Er³⁺ ions are localized inside the Si nanocrystallites and not in stoichiometric SiO₂. The optical cross-section is close to that of erbium in Si nanocrystallites.     

硅纳米孔柱阵列的结构和光学特性研究

采用水热腐蚀技术在单晶硅衬底上制备出一种新的硅微米／纳米结构复合体系——硅纳米孔柱阵列(Si-NPA)，并对其表面形貌、结构及光学特性进行研究.Si-NPA的结构复合性体现为 在微米和纳米两个尺度上形成了三个分明的结构层次，即微米尺度的硅柱阵列结构、硅柱上 的纳米多孔结构以及组成孔壁的硅纳米晶粒.积分光反射谱和荧光光谱测试表明，Si-NPA具 有良好的光吸收和光致发光特性.依据Si－NPA积分反射谱的实验数据，采用Kramers-Kronig 变换关系计算得到了Si-NPA的复折射率和复介电函数、吸收系数等光学常数，并由此讨论了 Si-NPA相对于单晶硅的光学特性发生显著变化的原因.最后，通过分析Si-NPA的光吸收系数 与入射光子能量之间的关系，揭示出Si-NPA具有直接带隙半导体的电子结构特征，而且理论 计算得到的Si-NPA的带隙能与其光致发光谱的峰位能很好符合. 关键词： 硅纳米孔柱阵列 光学特性 电子结构 水热腐蚀     

Low-bias visible photodetection realized by graphite nanostructures grown on silicon nanoporous pillar array

A graphite nanostructure (nano-graphite) with the morphology of nanoparticles and nanowires which are composed of graphite nanocrystallites (nc-graphite) was grown on silicon nanoporous pillar array (Si-NPA) by a simple chemical vapor deposition method. The structural characterizations disclosed a complex interface configuration made of nc-graphite, nc-Ni (pre-deposited on Si-NPA as catalyst for nc-graphite growth), nc-NiO₂, and nc-Si. The designed nano-graphite/Si-NPA exhibits strong light absorption and sensitive photoresponsivity under low-bias potential in the visible region of 400–800 nm. For example, it shows a switching ratio of 75, a photoresponsivity of ~?0.16 AW^?1 and a rise/fall time of 12.24/5.66 s with an ultralow bias of 0.1 mV under the visible illumination of 5 mWcm^?2. The high switching ratio and responsivity were ascribed to the complexity of the interface nanostructures and the formation of a thick and compact graphite nanofilm. The results illustrate that nano-graphite/Si-NPA might be a promising candidate material for fabricating high-performance low-power Si-based visible photodetectors.     

CdS纳米带和纳米锯的热蒸发法的合成和光学性质研究

利用氢气辅助的一步热蒸发法,在镀有金膜的硅片上制备出大量的CdS纳米结构. CdS纳米结构由纤锌矿结构的CdS纳米带和纳米锯组成. 研究表明沉积温度对CdS纳米结构的形貌和尺寸具有重要影响. 用气-液-固和气-固复合生长机理解释了CdS纳米结构的形成过程.光致发光测试表明CdS纳米带和纳米锯均发射出波长为512 nm的很强的绿色发光峰,对应于CdS的带-带跃迁. 同时对CdS纳米结构的光波导性质也进行了观察和讨论.     

氧对于在Ar/O氛围下用近空间升华法制备的CdS薄膜的影响

采用近空间升华法（CSS）在氩/氧气氛中制备了硫化镉（CdS）多晶薄膜.利用XRD,XPS,AFM,UV-VIS光谱和四探针技术等测试和分析手段系统研究了氧对薄膜的成分、结构、光学和电学等性质的影响.结果表明,用近空间升华法制备的CdS薄膜具有六方相结构,膜层致密、均匀,平均晶粒大小约为40 nm,富硫.氧掺入后部分与镉生成氧化镉,并随着氧含量的增加,薄膜的成分有趋于化学计量比的趋势,光学带隙加宽,光暗电导比增加.此外,还利用扫描电镜（SEM）观察了CdS/CdTe断面结合光谱响应（QE）的结果讨论了氧对CdS/CdTe界面互扩散的影响.发现,随着CdS薄膜制备气氛中氧分压的升高,CdS/CdTe界面的互扩散程度降低,有利于提高器件在500—600 nm波长范围内的光谱响应.认为,氧含量的增加不但使CdS薄膜在光伏应用方面的质量得到改善,而且CdTe太阳电池器件中的CdS/CdTe界面也得到了优化. 关键词： CdS多晶薄膜 近空间升华法 窗口层 界面     

CdSe/CdS核壳量子点复合材料合成及其在白光发光二极管中的应用

采用有机化学合成法,利用正三辛基膦(TOP)辅助的快速注入生长方法,改进传统的制备工艺,实现了CdSe/CdS厚壳层核壳(8.6 ML)量子点复合材料的合成制备,并对所合成的核、核壳量子点及其复合材料的晶格结构、形貌特点与发光性质进行了XRD、TEM、SEM、UV-Vis、PL表征和红光补偿效果测试。测试结果表明,CdSe核具有立方纤锌矿晶格结构;CdSe/CdS量子点复合材料直径为45~75μm,呈菱形规则形貌,且颗粒分散性良好。采用该方法,可以提高量子产率,产率由4%(CdSe核)升至48%(CdSe/CdS核壳量子点);可以增强激子态发光能力,CdSe/CdS核壳量子点复合材料的荧光强度约为CdSe核的13倍。将该材料与YAG∶Ce~(3+)黄色荧光粉组合应用,获得了高光效(148.29 lm/W)、高显色指数(Ra为90.1,R9为97.0)的白光发光二级管,表明按照上述方法获得的CdSe/CdS核壳量子点复合材料在白光发光二极管中深红光波段具有较好的补偿效果。     

核/壳结构ZnS : Mn/CdS纳米粒子的制备及发光

利用溶剂热法制备了Mn离子掺杂的ZnS纳米粒子(ZnS : Mn),利用沉淀法对ZnS ∶ Mn纳米粒子进行了不同厚度的CdS无机壳层包覆。采用X射线衍射(XRD)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)及光致发光(PL)光谱等手段对样品进行了表征。TEM显示粒子为球形,直径大约在14~18 nm之间。由XRD结果可以看出CdS壳层的形成过程受到了ZnS ∶ Mn核的影响,导致其结晶较差。XRD和XPS测量证明了ZnS : Mn/CdS的核壳结构。随着CdS壳层的增厚,样品的发光强度呈现一直减弱的现象。     

采用紫外光照法在磷酸盐玻璃中合成CdS/Ag复合微粒

掺杂有Ⅱ-Ⅵ族半导体纳米颗粒(如CdS)或者过渡金属(如Ag)的玻璃由于其较大的非线性光学效应而引起人们的极大兴趣,而同时掺杂有半导体/金属的复合微粒则可以进一步增强玻璃的三阶非线性效应,因此成为目前的研究热点。我们利用玻璃沉淀技术及随后的热处理和紫外光还原技术制备了含高浓度(1%)Ag微粒的玻璃,并采用X射线衍射分析了其物相,用高分辨扫描电镜分析了其形貌,以及测试了其吸收和发光性能。从CdS/Ag复合微粒的扫描照片可以发现晶粒均匀分布在玻璃中,尺寸约为1μm。X射线衍射发现经过热处理和紫外光照的样品衍射峰中含有CdS和Ag,而只进行热处理的样品则只含有CdS,未处理的样品则显非晶态。CdS/Ag复合微粒的吸收峰呈现典型的表面等离子共振峰(420nm)以及CdS的峰(600nm),只含有CdS微粒的样品的吸收峰则在480nm附近,未处理的样品在320nm附近有一个吸收峰,这可能是由于样品在快速冷却过程中的微小晶化造成的。只含有CdS微粒的样品有三个明显的发光峰,然而CdS/Ag复合微粒的发过峰则消失。我们提出了共振能量转移机制来解释该现象。讨论了紫外光照还原Ag微粒的机制。可以认为通过紫外光照,CdS表面的电子被激发出来还原Ag+,从而形成银颗粒,伴随着空穴则被表面缺陷所捕获。     

Optical Analysis of Nanocrystalline ZnO Films Coated on Porous Silicon by Radio Frequency (RF) Magnetron Sputtering

Zinc oxide thin films have been deposited onto porous silicon (PSi) substrates at high growth rates by radio frequency (RF) sputtering using a ZnO target. The advantages of the porous Si template are economical and it provides a rigid structural material. Porous silicon is applied as an intermediate layer between silicon and ZnO films and it contributed a large area composed of an array of voids. The nanoporous silicon samples were adapted by photo electrochemical (PEC) etching technique on n-type silicon wafer with (111) and (100) orientation. Micro-Raman and photoluminescence (PL) spectroscopy are powerful and non-destructive optical tools to study vibrational and optical properties of ZnO nanostructures. Both the Raman and PL measurements were also operated at room temperature. Micro-Raman results showed that the A₁(LO) of hexagonal ZnO/Si(111) and ZnO/Si(100) have been observed at around 522 and 530 cm^–1, re- spectively. PL spectra peaks are distinctly apparent at 366 and 368 cm^–1 for ZnO film grown on porous Si(111) and Si(100) substrates, respectively. The peak luminescence energy in nanocrystalline ZnO on porous silicon is blue-shifted with regard to that in bulk ZnO (381 nm). The Raman and PL spectra pointed to oxygen vacancies or Zn interstitials which are responsible for the green emission in the nanocrystalline ZnO.     

Ground state of excitons in quantum-dot quantum-well nanoparticles： stochastic variational method

Within the framework of effective mass approximation, the ground state of excitons confined in spherical core-shell quantum-dot quantum-well (QDQW) nanoparticles is solved by using the stochastic variational method, in which the finite band offset and the heavy (light) hole exciton states are considered. The calculated 1s_e－1s_h transition energies for the chosen CdS/HgS/CdS QDQW samples are in good agreement with the experimental measurements. Moreover, some previous theoretical results are improved.     

反应前驱物中n(S)∶n(Cd)对CdS薄膜结构及发光特性的影响

采用化学水浴以CdCl2·H2O、CS( NH2)2、NH4Cl、NH3·H2O和去离子水作为反应前驱物制备CdS纳米晶薄膜.采用扫描电镜( SEM)、X射线衍射(XRD)、透射光谱和稳态荧光光谱,研究了反应前驱物中不同的n(S)∶n(Cd)对所制备的CdS薄膜的形貌、结构和光学性能的影响.结果表明:反应前驱物中n(S...     

Low temperature ferromagnetic properties of CdS and CdTe thin films

The magnetic property in a material is induced by the unpaired electrons. This can occur due to defect states which can enhance the magnetic moment and the spin polarization. In this report, CdS and CdTe thin films are grown on FTO glass substrates by chemical bath deposition and close-spaced sublimation, respectively. The magnetic properties, which are introduced from oxygen states, are found in CdS and CdTe thin films. From the hysteresis loop of magnetic moment it is revealed that CdS and CdTe thin films have different kinds of magnetic moments at different temperatures. The M–H curves indicate that from 100 K to 350 K, CdS and CdTe thin films show paramagnetism and diamagnetism, respectively.A superparamagnetic or a weakly ferromagnetic response is found at 5 K. It is also observed from ZFC/FC curves that magnetic moments decrease with temperature increasing. Spin polarized density functional calculation for spin magnetic moment is also carried out.     

Effect of the laser fluence on structural and optical characterization of thin CdS films synthesized by femtosecond pulsed laser deposition

CdS thin films have been grown on Si(1 1 1) and quartz substrates using femtosecond pulsed laser deposition. X-ray diffraction, atomic force microscopy, photoluminescence measurement, and optical transmission spectroscopy were used to characterize the structure and optical properties of the deposited CdS thin films. The influence of the laser fluence (laser incident energy in the range 0.5–1.5 mJ/pulse) on the structural and optical characterizations of CdS thin films has been studied. The results indicate that the structure and optical properties of the CdS thin films can be improved as increasing the per pulse output energy of the femtosecond laser to 1.2 mJ. But when the per pulse output energy of the femtosecond laser is further increased to 1.5 mJ, which leads to the degradation of the structure and optical properties of the CdS thin films.     

Preparation of water-soluble CdTe/CdS core/shell quantum dots with enhanced photostability

CdTe/CdS core/shell quantum dots (QDs) have been synthesized in an aqueous phase using thioacetamide as a sulfur source. The quantum yield was greatly enhanced by the epitaxial growth of a CdS shell, which was confirmed by X-ray photoelectron spectroscopy (XPS) results. The quantum yield of as-prepared CdTe/CdS core/shell QDs without any post-preparative processing reached 58%. The experimental results illustrate that the QDs with core/shell structure show better photostability than thioglycolic acid (TGA)-capped CdTe QDs. The cyclic voltammograms reveal higher oxidation potentials for CdTe/CdS core/shell QDs than for TGA-capped CdTe QDs, which explains the superior photostability of QDs with a core/shell structure. This enhanced photostability makes these QDs with core/shell structure more suitable for bio-labeling and imaging.