Cu(221)和CuZn(221)表面甲醇合成的基于第一性原理微观动力学的理论研究（英文）

本文基于第一性原理的微观动力学模拟方法,对Cu(221)和CuZn(221)上一氧化碳和二氧化碳加氢到甲醇进行了系统的理论计算研究.研究发现,碳转化率在两个表面上均表现出相同的活性顺序:CO加氢活性CO/CO_2混合加氢活性CO_2加氢活性.CO的高转化活性源于其基元反应能垒低于CO_2甲醇合成的基元反应能垒.相比于Cu(221)表面,Zn的掺杂显著降低了甲醇合成活性,尤其是CO加氢的活性,对于CO和CO_2共存的情况,研究发现CO是Cu(221)甲醇合成的主要碳源,而CuZn(221)上的碳源则由CO和CO_2共同提供.反应速控度分析表明,CO/C02混合气甲醇合成的速控步在Cu(221)表面是HCO、HCOO的加氢,而在CuZn(221)表面速控步则是HCOOH的加氢.这些研究结果表明铜基催化剂上Zn的表面合金效应、以及合成气组分对甲醇合成的活性和反应通道具有重要的影响.     

使用金属掺杂SnO2(110)作为表面催化剂的电催化CO2还原反应：通过调控Sn:O原子比例来控制产物

电催化CO₂还原反应可以产生HCOOH和CO,目前该反应是将可再生电力转化为化学能存储在燃料中的最有前景的方法之一. SnO₂作为将CO₂转换为HCOOH和CO的良好催化剂,其反应发生的晶面可以是不同的. 其中(110)面的SnO₂非常稳定,易于合成. 通过改变SnO₂(110)的Sn:O原子比例,得到了两种典型的SnO₂薄膜：完全氧化型(符合化学计量)和部分还原型. 本文研究了不同金属(Fe、Co、Ni、Cu、Ru、Rh、Pd、Ag、Os、Ir、Pt和Au)掺杂的SnO₂(110),发现在CO₂还原反应中这些材料的催化活性和选择性是不同的. 所有这些变化都可以通过调控(110)表面中Sn:O原子的比例来控制. 结果表明,化学计量型和部分还原型Cu/Ag掺杂的SnO₂(110)对CO₂还原反应具有不同的选择性. 具体而言,化学计量型的Cu/Ag掺杂的SnO₂(110)倾向于产生CO(g),而部分还原型的表面倾向于产生HCOOH(g). 此外,本文还考虑了CO₂还原的竞争析氢反应. 其中Ru、Rh、Pd、Os、Ir和Pt掺杂的SnO₂(110)催化剂对析氢反应具有较高的活性,其他催化剂对CO₂还原反应具有良好的催化作用.     

密度泛函理论研究α-MoC(100)在甲醇水蒸汽重整中的催化作用

本文通过密度泛函理论计算方法探究了α-MoC催化甲醇水蒸气重整(CH₃OH+H₂O→CO₂+3H₂)反应,系统地研究了甲醇水蒸气重整反应中相关中间体的吸附行为和基本步骤的动力学. 结果表明,在α-MoC(100)表面,甲醇容易裂解形成CH₃O中间体,CH₃O进一步脱氢为CH₂O. 通过比较CH₂O和OH缔合过程和CH₂O直接分解过程,发现CH₂O和OH之间更容易形成CH₂OOH而不是分解成CHO和H. 计算结果表明,CH₂OOH中间体的连续脱氢对CO₂有很高的选择性. 相反,在α-MoC(111)表面,由于CH₂O中间体的强吸附使其更偏向于脱氢生成CHO,最后生成产物CO. 此外,高水解离产生的OH物种可以促进中间体O-H键的断裂,并显著降低反应能垒. 本文不仅揭示了α-MoC(100)晶面在甲醇水蒸气重整反应中的催化作用,也为α-MoC基催化剂的设计提供了理论指导.     

NH3在Ni/Pt(111)和Ni/WC(001)表面上分解的第一性原理研究

采用密度泛函理论和slab模型,研究NH₃在Ni单原子层覆盖的Pt（111）和WC（001）表面上的物理与化学行为,计算了Ni单原子覆盖表面的电子结构以及NH₃的吸附与分解.表面覆盖的单原子层中,Ni原子的性质与Ni（111）面上的Ni原子明显不同.与Ni（111）相比,Ni/Pt（111）和Ni/WC（001）表面上Ni原子dz²轨道上的电子更多地转移到了其它位置,该轨道上电荷密度降低有利于NH₃吸附.在Ni/Pt（111）和Ni/WC（001）面上NH₃吸附能均大于Ni（111）,NH₃分子第一个N-H键断裂的活化能则明显比Ni（111）面上低,有利于NH₃的分解,吸附能增大使NH₃在Ni/Pt（111）和Ni/WC（001）面上更倾向于分解,而不是脱附.N₂分子的生成是NH₃分解的速控步骤,该反应能垒较高,说明N₂分子只有在较高温度下才能生成.WC与Pt性质相似,但Ni/Pt（111）和Ni/WC（001）的电子结构还是有差异的,与Ni（111）表面相比,NH₃在Ni/Pt（111）表面上分解速控步骤的能垒降低,而在Ni/WC（001）上却升高.要获得活性好且便宜的催化剂,需要对Ni/WC（001）表面做进一步改进,降低N₂分子生成步骤的活化能.     

Pd修饰Cu电极的电化学CO2还原

利用微分电化学质谱和电化学原位衰减全反射红外光谱技术探究了Cu和CuPd催化剂上CO₂和CO的电化学还原行为. 红外光谱观察到了生成甲醇、甲烷与乙烯的CH_x中间物种. 在CuPd电极CO₂还原过程中，红外光谱的CO吸附峰起始电位比Cu正移大约300 mV，说明CuPd能够有效促进CO₂还原；CO饱和溶液中，Cu和CuPd电极CO起始吸附电位基本相同；两电极上CO谱带出现的电位与CO₃^2-的谱带降低的电位基本相同，说明CO的吸附需要CO₃^2-的脱附. 利用电化学在线质谱发现在CuPd电极上CO还原产生CH₄和CH₃OH的起始电位比Cu电极正移约200 mV. 推测催化活性的提升可能是由于Pd的引入改变了Cu的d能带，且Pd吸附更多的H，从而促进CO₂还原，使CO能够与H结合并被深度还原.     

Ti+(CO2)2Ar和Ti+(CO2)n(n=3-7)络合物离子的红外光解离光谱 (cited: 1)

利用脉冲激光溅射-超声分子束载带方法制备了气相Ti⁺(CO₂)₂Ar和Ti⁺(CO₂)_n(n=3-7)络合物离子．采用红外光解离光谱研究了这些选定的质量离子的振动光谱． 对于每一种络合物离子, 在CO伸缩振动频率范围都观察到了振动峰,表明这些离子具有插入的OTi⁺CO(CO₂)_n-1结构． 对于n≦5的OTi⁺CO(CO₂)_n-1离子,其CO振动和CO₂的反对称伸缩振动频率都比自由的CO和CO₂的频率要高,表明CO和CO₂配体与中心金属离子之间主要是静电相互作用．实验结果还表明TiO⁺可以直接络合五个配体(1个CO和4个CO₂分子)．对于n=2络合物体系,除了插入的OTi⁺CO(CO₂)结构以外,还观察到了具有弯曲结构的OCO-Ti⁺-OCO异构体的存在     

利用原位红外光谱与微分电化学质谱联用技术研究在Pt以及PtRu电极上发生的甲醇氧化反应

利用电化学衰减全反射原位傅里叶变换红外光谱与微分电化学质谱联用技术,在流动电解池环境以及恒电位条件下研究了Pt电极和Pt电极通过表面电沉积Ru形成的PtRu电极(Pt_xRu_y)上发生的甲醇氧化反应(反应电解质溶液为0.1 mol/L HClO₄+0.5 mol/L MeOH). 在0.3～0.6 V(参比电极为可逆氢参比)实验用到的所有电极上,CO是唯一能从红外光谱观察到的与甲醇相关的表面吸附物;在Pt_0.56Ru_0.44电极上可以观察到CO吸附在Ru原子形成的岛上和CO线式吸附在Pt电极表面红外波段,而其他电极上只能观察到Pt表面上线式吸附的CO;甲醇氧化活性按Pt_0.73Ru_0.27>Pt_0.56Ru_0.44>Pt_0.83Ru_0.17>Pt的顺序递减;在0.5 V 时,甲醇在Pt_0.73Ru_0.27电极上的氧化反应的CO₂电流效率达到了50%.     

利用双段床反应器从生物油重整合成气合成甲醇

一种组合了合成气在线调整和甲醇合成的双段床反应器,成功应用于由生物油重整得到的富CO₂合成气的高效合成甲醇．在前段催化床反应器内,富含CO2的原始生物质合成气在CuZnAlZr催化剂的催化作用下可以有效地转化为含CO的合成气．经过450 oC的合成气在线调整之后,CO₂/CO的比率由6.3大幅降至1.2．经过调整后的生物质基合成气在后段催化床反应器内由工业CuZnAl催化剂催化合成甲醇,当反应条件为260 oC 和5.5 MPa时得到每小时每kg催化剂的最大甲醇     

铂基团簇Pt3X(X=Al，Si，Cu)催化水制氢及其水解副产物氧化CO

本文基于第一性原理研究了利用具有幻数结构特点的Pt₃X(X=Al，Si，Cu)团簇仅通过一步反应就能催化分解水制氢的反应过程. 吸附物H₂O@Pt₃X团簇在波长300∽760 nm的紫外和可见光范围内有强吸收，表明太阳光可以方便地用于Pt₃X的催化水解制氢的反应. 此外，水解后滞留在团簇上的O原子可在反应活化能为0.34∽0.58 eV内与CO氧化反应生成CO₂. 这个通过氧化消除“毒性”CO的结果表明了反应副产物有能作催化剂的循环再利用能力. 本文发现生成的CO₂分子还可以在323 K的温度下脱离Pt₃X小团簇.     

甲醇分子在金红石TiO2(110)和锐钛矿TiO2(001)表面吸附和反应的活性位点

通过高分辨的扫描隧道显微术研究并比较了金红石型TiO₂(110)-(1×1)和锐钛矿型TiO₂(001)-(1×4)两种表面的活性位点． 在金红石型TiO₂(110)-(1×1)表面, 观察到氧空位缺陷是O₂和CO₂分子的活性吸附位点,而五配位的Ti原子是水分子和甲醇分子的光催化反应活性位点．在锐钛矿型TiO₂(001)-(1×4)表面,观察到完全氧化的表面,Ti原子更可能是六配位的,H₂O和O₂分子均不易在这些Ti原子上吸附．经还原后表面出现富Ti的缺陷位点, 这些缺陷位点对H₂O和O₂分子表现出明显的活性． 锐钛矿型TiO₂(001)-(1×4)表面的吸附和反应活性并不具有很高的活性,某种程度上其表现出的活性似乎低于金红石型TiO₂(110)-(1×1)表面．     

The synthesis of methanol and the reverse water-gas shift reaction over Zn-deposited Cu(100) and Cu(110) surfaces: comparison with Zn/Cu(111)

The catalytic activity of Zn vapor-deposited Cu(100) and Cu(110) surfaces for methanol synthesis by the hydrogenation of CO₂ and the reverse water-gas shift reaction were studied using an XPS apparatus combined with a high-pressure flow reactor (18 atm). At a reaction temperature of 523 K, no promotional effect of Zn was observed for the methanol synthesis on both Zn/Cu(100) and Zn/Cu(110). The results were quite different from those for Zn/Cu(111), on which a significant promotion of methanol synthesis activity appeared to be due to the deposition of Zn, indicating that the promotional effect of Zn was sensitive to the surface structure of Cu. However, hysteresis was observed in the catalytic activity for methanol synthesis over the Zn/Cu(110) surface upon heating above 543 K in the reaction mixture. The activity became twice that measured before heating, which was close to the methanol synthesis activity of Zn/Cu(111) at the same Zn coverage. On the other hand, no such hysteresis was observed for the reverse water-gas shift reaction on Zn/Cu(110), indicating that the active site for methanol synthesis was not identical to that for the reverse water-gas shift reaction. In the post-reaction surface analysis, formate species was detected on both Zn/Cu(100) and Zn/Cu(110), whose coverage increased with increasing Zn coverage at 0<Θ_Zn<0.2. No correlation between the formate coverage and the methanol synthesis activity was obtained, which was in contrast to the results for Zn/Cu(111). Thus, the structure sensitivity observed in the catalytic activity of methanol synthesis over Zn-deposited Cu surfaces is ascribed to the significant difference in the reactivity of the formate intermediate.     

Mechanism of CO2 hydrogenation over Cu/ZrO2(2̅12) interface from first-principles kinetics Monte Carlo simulations

It has been a goal consistently pursued by chemists to understand and control the catalytic process over composite materials. In order to provide deeper insight on complex interfacial catalysis at the experimental conditions, we performed an extensive analysis on CO₂ hydrogenation over a Cu/ZrO₂ model catalyst by employing density functional theory (DFT) calculations and kinetic Monte Carlo (kMC) simulations based on the continuous stirred tank model. The free energy profiles are determined for the reaction at the oxygen-rich Cu/m-ZrO₂ (2?12) interface, where all interfacial Zr are six-coordinated since the interface accumulates oxidative species at the reaction conditions. We show that not only methanol but also CO are produced through the formate pathway dominantly, whilst the reverse-water-gas-shift (RWGS) channel has only a minor contribution. H₂CO is a key intermediate species in the reaction pathway, the hydrogenation of which dictates the high temperature of CO₂ hydrogenation. The kinetics simulation shows that the CO₂ conversion is 1.20%, the selectivity towards methanol is 68% at 500 K and the activation energies for methanol and CO formation are 0.79 and 1.79 eV, respectively. The secondary reactions due to the product readsorption lower the overall turnover frequency (TOF) but increase the selectivity towards methanol by 16%. We also show that kMC is a more reliable tool for simulating heterogeneous catalytic processes compared to the microkinetics approach.     

Formate stability and carbonate hydrogenation on strained Cu overlayers on Pt(1 1 1)

Formate (HCOO) synthesis, decomposition and the hydrogenation of carbonate (CO₃) on Cu overlayers deposited on a Pt(1 1 1) single crystal are investigated to examine the reactivity of a Cu surface under tensile strain with defects present.Formate is synthesized from a 0.5 bar mixture of 70% CO₂ and 30% H₂ at varying temperatures, and the evolution is followed with polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS). Subsequent TPD reveals decomposition of the formate species into CO₂ and H₂ at 420 ± 5 K for strained Cu at sub-monolayer to monolayer coverages. This is a significantly lower decomposition temperature than obtained earlier on pristine Cu(1 1 1) (460 K), as well as for thicker Cu layers where we assign an observed decomposition peak at 440 ± 5 K to relaxed, but defect-rich Cu(1 1 1). However, the thermal stability of formate on strained and defect-rich Cu is similar to previous results obtained for supported, and lattice-strained, Cu nanoparticles.The hydrogenation of carbonate produced by 0.3 bar CO₂ exposure at room temperature was monitored with XPS and TPD showing a significant loss of carbonate when subjected to 0.2 bar H₂ at room temperature. However, the presence of formate on the surface, or any other hydrogenation product, could not be established during or after H₂ exposure by PM-IRRAS, EELS or TPD. Even so, the results suggest that carbonate and its hydrogenation may constitute a relevant pathway to methanol production.     

The effects of power ultrasound (24 kHz) on the electrochemical reduction of CO2 on polycrystalline copper electrodes

The electrochemical CO₂ reduction reaction (CO2RR) on polycrystalline copper (Cu) electrode was performed in a CO₂-saturated 0.10 M Na₂CO₃ aqueous solution at 278 K in the absence and presence of low-frequency high-power ultrasound (f = 24 kHz, P_T ~ 1.23 kW/dm³) in a specially and well-characterized sonoelectrochemical reactor. It was found that in the presence of ultrasound, the cathodic current (I_c) for CO₂ reduction increased significantly when compared to that in the absence of ultrasound (silent conditions). It was observed that ultrasound increased the faradaic efficiency of carbon monoxide (CO), methane (CH₄) and ethylene (C₂H₄) formation and decreased the faradaic efficiency of molecular hydrogen (H₂). Under ultrasonication, a ca. 40% increase in faradaic efficiency was obtained for methane formation through the CO2RR. In addition, and interestingly, water-soluble CO₂ reduction products such as formic acid and ethanol were found under ultrasonic conditions whereas under silent conditions, these expected electrochemical CO2RR products were absent. It was also found that power ultrasound increases the formation of smaller hydrocarbons through the CO2RR and may initiate new chemical reaction pathways through the sonolytic di-hydrogen splitting yielding other products, and simultaneously reducing the overall molecular hydrogen gas formation.     

Surface (electro-)chemistry on Pt(1 1 1) modified by a Pseudomorphic Pd monolayer

The formic acid and methanol oxidation reaction are studied on Pt(1 1 1) modified by a pseudomorphic Pd monolayer (denoted hereafter as the Pt(1 1 1)-Pd_1 ML system) in 0.1 M HClO₄ solution. The results are compared to the bare Pt(1 1 1) surface. The nature of adsorbed intermediates (CO_ad) and the electrocatalytic properties (the onset of CO₂ formation) were studied by FTIR spectroscopy. The results show that Pd has a unique catalytic activity for HCOOH oxidation, with Pd surface atoms being about four times more active than Pt surface atoms at 0.4 V. FTIR spectra reveal that on Pt atoms adsorbed CO is produced from dehydration of HCOOH, whereas no CO adsorbed on Pd can be detected although a high production rate of CO₂ is observed at low potentials. This indicates that the reaction can proceed on Pd at low potentials without the typical “poison” formation. In contrast to its high activity for formic acid oxidation, the Pd film is completely inactive for methanol oxidation. The FTIR spectra show that neither adsorbed CO is formed on the Pd sites nor significant amounts of CO₂ are produced during the electrooxidation of methanol.     

Molecular orbital study of the interaction of carbon monoxide and carbon dioxide with copper (100)

A molecular orbital study is made of the structures and energy levels of CO and CO₂ on Cu(100). The importance of self-consistency is discussed. CO is found to occupy fourfold indentations, in agreement with the semiempirical results of Doyden and Ertl. The C-surface distance is 1.0 Å and the CO bond stretches less than 0.1 Å. Large models of the surface show convergence of the electronic structure with four CO molecules on a twelve Cu atom cluster model of the surface. At coverages up to c(2 × 2) half monolayer, calculated energy levels match Demuth and Eastman's phase I photoemission spectrum. Phase II, as observed by them, has no analog in the calculations. No evidence is found for CO deviating from perpendicular to the surface when tightly bound. CO₂ is found to adsorb more weakly to the surface. This molecule rests in a μ bridging position, bonded through mixing of Cu d with CO₂ π¹ orbitals. It bends, with an angle of 120°, which is significantly similar to 122° for the ¹B₂ excited state of free CO₂, which has an electron promoted to the π¹ orbital. On the basis of this molecular orbital study, extrapolations to Ni and Zn surfaces and OCS, CS₂, CSe₂ and CTe₂ are made.     

In situ XPS and MS study of methanol decomposition and oxidation on Pd(111) under millibar pressure range

The methanol decomposition and oxidation on a Pd(111) single crystal have been investigated in situ using ambient-pressure X-ray photoelectron spectroscopy (XPS) and mass-spectrometry (MS) in the temperature range of 300–600 K. It was found that even in the oxygen presence the methanol decomposition on palladium proceeds through two competitive routes: fast dehydrogenation to CO and H₂, and slow decomposition of methanol via the C–O bond scission. The rate of the second route is significant even in the millibar pressure range, which leads to a blocking of the palladium surface by carbon and to a prevention of the further methanol conversion. As a result, no gas phase products of methanol decomposition were detected by mass-spectrometry at 0.1 mbar CH₃OH in the whole temperature range. The methanol C–O bond scission produces CH_x species, which fast dehydrogenate to atomic carbon even at room temperature and further partially dissolve in the palladium bulk at 400 K with the formation of the PdC_x phase. According to in situ XPS data, the PdC_x phase forms even in the oxygen excess. The application of an in situ XPS–MS technique unambiguously shows a good correlation between a decrease in the surface concentration of all carbon-containing species and the rate of methanol conversion. Since these carbon species have a high reactivity towards oxygen, heating of Pd(111) above 450 K in a methanol–oxygen mixture yields CO, CO₂, and water. The product distribution indicates that the main route of methanol conversion is the dehydrogenation of methanol to CO and hydrogen. However, under the experimental conditions used, hydrogen is completely oxidized to water, while CO is partially oxidized to CO₂. No palladium oxide was detected by XPS in these conditions.     

Methanol decomposition on platinum (111)

The interaction of methanol with clean and oxygen-covered Pt(111) surfaces has been examined with high resolution electron loss spectroscopy (EELS) and thermal desorption spectroscopy (TDS). On the clean Pt(111) surface, methanol dehydrogenated above 140 K to form adsorbed carbon monoxide and hydrogen. On a Pt(111)-p(2 × 2)O surface, methanol formed a methoxy species (CH₃O) and adsorbed water. The methoxy species was unstable above 170 K and decomposed to form adsorbed CO and hydrogen. Above room temperature, hydrogen and carbon monoxide desorbed near 360 and 470 K, respectively. The instability of methanol and methoxy groups on the Pt surface is in agreement with the dehydrogenation reaction observed on W, Ru, Pd and Ni surfaces at low pressures. This is in contrast with the higher stability of methoxy groups on silver and copper surfaces, where decomposition to formaldehyde and hydrogen occurs. The hypothesis is proposed that metals with low heats of adsorption of CO and H₂ (Ag, Cu) may selectively form formaldehyde via the methoxy intermediate, whereas other metals with high CO and H₂ chemisorption heats rapidly dehydrogenate methoxy species below room temperature.     

Characterization of ZrO2-promoted Cu/ZnO/nano-Al2O3 methanol steam reforming catalysts

Three Cu/ZnO/ZrO₂/Al₂O₃ methanol reforming catalysts were investigated using X-ray photoelectron spectroscopy (XPS). The catalysts which contained ZrO₂ from a monoclinic nanoparticle ZrO₂ precursor exhibit both a higher activity toward the methanol steam reforming reaction and a lower CO production rate compared to catalysts composed of an XRD-amorphous ZrO₂ produced by impregnation using a Zr(NO₃)₂ precursor. The presence of a monoclinic phase appears to result in an increased charge transfer between the Zr and Cu species, as evidenced by a relatively electron-rich ZrO₂ phase and a partially oxidized Cu species on reduced catalysts. This electron deficient Cu species is more reactive toward the methanol reforming reaction and partially suppresses CO formation through the reverse water gas shift or methanol decomposition reactions.