多孔弹性介质三层夹心板的隔声性能研究

应用Biot关于流体饱和多孔弹性介质的声传播理论,采用传递矩阵的分析方法,就复合多孔弹性材料夹心三层板在不同结构情况下的隔声性能进行了理论研究和实验分析,并与同等条件下双层夹心板的隔声性能进行了比较。数值计算和实验结果均表明,与双层夹心板相比,三层夹心板在中高频段隔声性能有明显优势,但低频段隔声性能有一定程度上的下降。研究还表明不同结构的复合三层夹心板在隔声效果上也各有特色。     

Evaluation of the acoustic and non-acoustic properties of sound absorbing materials using a three-microphone impedance tube

This paper presents a straightforward application of an indirect method based on a three-microphone impedance tube setup to determine the non-acoustic properties of a sound absorbing porous material. First, a three-microphone impedance tube technique is used to measure some acoustic properties of the material (i.e., sound absorption coefficient, sound transmission loss, effective density and effective bulk modulus) regarded here as an equivalent fluid. Second, an indirect characterization allows one to extract its non-acoustic properties (i.e., static airflow resistivity, tortuosity, viscous and thermal characteristic lengths) from the measured effective properties and the material open porosity. The procedure is applied to four different sound absorbing materials and results of the characterization are compared with existing direct and inverse methods. Predictions of the acoustic behavior using an equivalent fluid model and the found non-acoustic properties are in good agreement with impedance tube measurements.     

Estimation method for parameters of construction on predicting transmission loss of double leaf dry partition

For improving sound insulation of a double leaf dry partition, each leaf is often consisted of more than one panel. Previous study on predicting a transmission loss of double leaf partition, treats with the leaf varied just two kinds of panels and restricted to a leaf having same kind and same thickness. These restrictions are unfit for variety of current building materials and constructions. This study makes a prediction formula for a transmission loss of the double leaf partition with laminated leaves by a theoretical analysis and an experiment, and will discuss the predicted value with measured value in previous studies and catalogs.     

Sound transmission loss of foam-filled honeycomb sandwich panels using statistical energy analysis and theoretical and measured dynamic properties

Comparisons between the experimental and predicted sound transmission loss values obtained from statistical energy analysis are presented for two foam-filled honeycomb sandwich panels. Statistical energy analysis (SEA) is a modeling procedure which uses energy flow relationships for the theoretical estimation of the sound transmission through structures in resonant motion. The accuracy of the prediction of the sound transmission loss using SEA greatly depends on accurate estimates of: (1) the modal density, (2) the internal loss factor, and (3) the coupling loss factor parameters of the structures. A theoretical expression for the modal density of sandwich panels is developed from a sixth-order governing equation. Measured modal density estimates of the two foam-filled honeycomb sandwich panels are obtained by using a three-channel spectral method with a spectral mass correction to allow for the mass loading of the impedance head. The effect of mass loading of the accelerometer is corrected in the estimations of both the total loss factor and radiation loss factor of the sandwich panels.     

Comparison of various decentralised structural and cavity feedback control strategies for transmitted noise reduction through a double panel structure

This paper compares various decentralised control strategies, including structural and acoustic actuator–sensor configuration designs, to reduce noise transmission through a double panel structure. The comparison is based on identical control stability indexes. The double panel structure consists of two panels with air in between and offers the advantages of low sound transmission at high frequencies, low heat transmission, and low weight. The double panel structure is widely used, such as in the aerospace and automotive industries. Nevertheless, the resonance of the cavity and the poor sound transmission loss at low frequencies limit the double panel's noise control performance. Applying active structural acoustic control to the panels or active noise control to the cavity has been discussed in many papers. In this paper, the resonances of the panels and the cavity are considered simultaneously to further reduce the transmitted noise through an existing double panel structure. A structural–acoustic coupled model is developed to investigate and compare various structural control and cavity control methods. Numerical analysis and real-time control results show that structural control should be applied to both panels. Three types of cavity control sources are presented and compared. The results indicate that the largest noise reduction is obtained with cavity control by loudspeakers modified to operate as incident pressure sources.     

The finite layer method for modelling the sound transmission through double walls

The finite layer method (FLM) is presented as a discretisation technique for the computation of noise transmission through double walls. It combines a finite element method (FEM) discretisation in the direction perpendicular to the wall with trigonometric functions in the two in-plane directions. It is used for solving the Helmholtz equation at the cavity inside the double wall, while the wall leaves are modelled with the thin plate equation and solved with modal analysis. Other approaches to this problem are described here (and adapted where needed) in order to compare them with the FLM. They range from impedance models of the double wall behaviour to different numerical methods for solving the Helmholtz equation in the cavity. For the examples simulated in this work (impact noise and airborne sound transmission), the former are less accurate than the latter at low frequencies. The main advantage of FLM over the other discretisation techniques is the possibility of extending it to multilayered structures without changing the interpolation functions and with an affordable computational cost. This potential is illustrated with a calculation of the noise transmission through a multilayered structure: a double wall partially filled with absorbing material.     

Vibro-acoustic behaviors of an elastically restrained double-panel structure with an acoustic cavity of arbitrary boundary impedance

An analytical study on the vibro-acoustic behaviors of a double-panel structure with an acoustic cavity is presented. Unlike the existing studies, a structural–acoustic coupling model of an elastically restrained double-panel structure with an acoustic cavity having arbitrary impedance on sidewalls around the cavity is developed in which the two dimensional (2D) and three dimensional (3D) modified Fourier series are used to represent the displacement of the panels and the sound pressure inside the cavity, respectively. The unknown expansions coefficients are treated as the generalized coordinates and the Rayleigh–Ritz method is employed to determine displacement and sound pressure solutions based on the energy expressions for the coupled structural–acoustic system. The effectiveness and accuracy of the present model is validated by numerical example and comparison with finite element method (FEM) and existing analytical method, with good agreement achieved. The influence of key parameters on the vibro-acoustic behaviors and sound transmission of the double-panel structure is investigated, including: cavity thickness, boundary conditions, sidewall impedance, and the acoustic medium in the cavity.     

An indirect hybrid sound transmission loss controller

The control of sound transmission through panels is an important noise control problem in the aerospace, aeronautical, and automotive industries. The trend towards using lightweight composite materials that have lower sound insulation performance is a negative factor regarding low frequency transmission loss. Double-panel partitions with the gap filled with sound absorption materials are often employed to improve the sound insulation performance with reduced added weight penalty. However, in the low frequency range, the strong coupling between the panels through the air cavity and mechanical paths may greatly reduce the sound transmission performance, making it even lower than the performance of a single panel in some frequency ranges. In this work, an experimental investigation of a new kind of hybrid (active/passive) acoustic actuator is presented. The idea consists of replacing the acoustic absorption material by a hybrid actuator aiming at improving the transmission loss at low frequencies without altering the passive attenuation. A prototype of the system is tested in a plane wave acoustic tube setup. Different kinds of SISO feedforward control implementations were used to attenuate the sound power transmitted through the hybrid active–passive panel using an error microphone or a particle velocity sensor placed downstream with respect to the sample panel. Measurement results of the transmission loss with active and hybrid attenuation are presented and discussed.     

On the acoustic modes in a cylindrical duct with an arbitrary wall impedance distribution

The present paper considers the propagation of sound in a cylindrical duct, with a wall section of finite length covered by an acoustic liner whose impedance is an arbitrary function of position. The cases of (i) uniform wall impedance, and wall impedance varying along the (ii) circumference or (iii) axis of the duct, or (iv) both simultaneously, are explicitly considered. It is shown that a nonuniform wall impedance couples modes with distinct azimuthal l or axial m wave numbers, so that their radial wave numbers k can no longer be calculated separately for each pair (m,l). The radial wave numbers are the roots of an infinite determinant, in the case when the wall impedance varies either (i) circumferentially or (ii) radially. If the wall impedance varies (iv) both radially and circumferentially, then the radial wave numbers are the roots of a doubly infinite determinant, i.e., an infinite determinant in which each term is an infinite determinant. The infinite determinants specifying the radial wave numbers are written explicitly for sound in a cylindrical nozzle with a uniform axial flow, in which case the radial eigenfunctions are Bessel functions; the method of calculation of the radial wave numbers applies equally well to a cylindrical nozzle with shear flow and/or swirling flows, with the Bessel functions replaced by other eigenfunctions. The radial wave numbers are calculated by truncation of the infinite determinants, for several values of the aspect ratio, defined as the ratio of length to diameter. It is shown that a nonuniform wall impedance will give rise to additional modes compared with a uniform wall impedance. The radial wave numbers specify the eigenfrequencies for the acoustic modes in the duct; the imaginary parts of the eigenfrequencies specify the decay of the sound field with time, and thus the effectiveness of the acoustic liner.     

Effect of wall aperture on sound propagation within a tube

I.IntroductionInmanycasesthecontinuityofsoundpropagationwithinatubeisbrokenbyaperturesonthetubewallsuchastoneholesonthemainboreofwoodwindmusicalinstruments,rectangularsound-windowofChineseinstrumentshengetc.Thediscontinuityhaseffectonwavccncoun-tCringit.Keefestudicdasing1etoneholeofwoodwindinstrumentandrepresenteditbyaT-sectionequiva1entcirc.it[11.Inthispaper,theapertureontubewa1lisstudiedfromdifferentpointofview,a1thoughtheGreen'sfunctionmethodisalsousedinthetheoreticalana1ysis.Moresimp1er…     

基于散射矩阵法的飞机壁板声学优化设计

采用散射矩阵法分析夹层板结构声学特性,并对典型的夹层板结构即飞机壁板进行声学优化,预计飞机壁板隔声特性,获得蒙皮、隔声隔热层、内饰板及它们的组合结构的声学性能。针对尾吊飞机客舱后部噪声过大问题,通过增加铺设隔热隔声层以及部分区域优化安装阻尼层等一系列被动降噪处理方法,对主要传递路径的飞机壁板结构进行优化,降低客舱后部噪声水平,并进行试验验证。试验结果表明:散射矩阵法可快速准确获得夹层结构的隔声性能,并与混响室法测试结果吻合较好;在厚度不变的前提下,改变隔热隔声层的铺设方式和材料密度对壁板隔声性能影响较小,但在蒙皮内侧粘贴阻尼层能在一定频段范围提高壁板隔声性能;将优化的壁板构型应用到飞机后舱段侧壁板,舱内噪声水平可降低约3 dB。     

Assessment of sandwich models for the prediction of sound transmission loss in unidirectional sandwich panels

The consistent higher-order approach and the two-parameter foundation formulation are used for the derivation of sound transmission loss in symmetric unidirectional (infinitely wide) sandwich panels with isotropic face sheets. In both models, transmission loss is calculated using decoupled equations representing symmetric and anti-symmetric motions of a sandwich panel. The closed-form expressions for impedances and transmission coefficient of a symmetric sandwich panel with an isotropic core are derived for the two-parameter foundation model. A comparison between the numerical predictions based on the two sandwich models and available experimental data shows that the consistent higher-order formulation can be used to predict the transmission loss in symmetric sandwich panels with both honeycomb and isotropic cores. For prediction of transmission loss of symmetric sandwich panels with an isotropic core, the two-parameter foundation model is more convenient, while the consistent higher-order approach is more accurate.     

Analysis of the sound transmission loss of panels with resonant systems on the basis of equivalent representations

Effects of increasing the sound transmission loss of panels with the help of resonant systems on the basis of equivalent representations are analyzed. Emphasis is placed on the least-studied resonant systems, the inertial bodies of which simultaneously interact with media on each side of the panels. A universal expression for the sound transmission loss of panels with an arbitrary system of resonant elements with one degree of freedom is presented. It includes the parameters common to all types of resonators (the total mass, compressibility, quality factor, and characteristic frequencies). The expression can be directly used to compare the efficiency of different types of resonant systems mounted on a panel and to determine their optimum parameters.     

改进型磁绝缘线振荡器的设计和数值模拟

 综合两种现有磁绝缘线振荡器的优点，对器件进行改进，将双渐变结构、轭流片和阻抗渐变三种增大功率的机制综合考虑，利用二维半全电磁PIC程序进行数值模拟，设计了一种新的改进型磁绝缘线振荡器，当外加电压为550kV，电流为35kA左右时，在L波段获得了6GW的峰值输出功率。     

Non-resonant sound transmission through double walls using statistical energy analysis

Although SEA is a suitable framework for predicting sound transmission through double walls it has been found that the standard method of computing the non- resonant coupling loss factor from a room to cavity underestimates the coupling. A revised model for computing this coupling loss factor is presented which gives much better agreement with measured data. This allows better predictions to be made of sound transmission through lightweight double walls.     

Mechanism and calculation of the niche effect in airborne sound transmission

The goal is to interpret and calculate the "niche effect" for the airborne sound transmission through a specimen mounted inside an aperture in the wall between the source and receiving reverberation rooms. The low-frequency sound insulation is known to be worse for the specimen placed at the center than for the specimen mounted at either edge of the aperture. As shown, the aperture with a tested specimen can be simulated at low frequencies as a triple partition where the middle element is the specimen and the role of the edge leaves is played by the air masses entrained at the aperture edges. With a centrally located specimen, such a triple system is symmetric and has two main natural frequencies close together. In this case, the resonant transmission is higher than for the edge arrangement simulated as a double system with one natural frequency. Analogous resonant phenomena are known to reduce the low-frequency transmission loss for symmetric triple windows or solid walls with identical air gaps and lightweight boards on both sides. The theoretical results obtained for the mechanical and acoustical models are in a good agreement with the experimental data.     

Sound transmission through finite lightweight multilayered structures with thin air layers

The sound transmission loss (STL) of finite lightweight multilayered structures with thin air layers is studied in this paper. Two types of models are used to describe the vibro-acoustic behavior of these structures. Standard transfer matrix method assumes infinite layers and represents the plane wave propagation in the layers. A wave based model describes the direct sound transmission through a rectangular structure placed between two reverberant rooms. Full vibro-acoustic coupling between rooms, plates, and air cavities is taken into account. Comparison with double glazing measurements shows that this effect of vibro-acoustic coupling is important in lightweight double walls. For infinite structures, structural damping has no significant influence on STL below the coincidence frequency. In this frequency region, the non-resonant transmission or so-called mass-law behavior dominates sound transmission. Modal simulations suggest a large influence of structural damping on STL. This is confirmed by experiments with double fiberboard partitions and sandwich structures. The results show that for thin air layers, the damping induced by friction and viscous effects at the air gap surfaces can largely influence and improve the sound transmission characteristics.     

An investigation into the acoustic insulation of triple-layered panels containing Newtonian fluids: Theory and experiment

Sound insulation of triple-layered panels consisting of two impervious layers with the middle layer being a Newtonian fluid is studied here both theoretically and experimentally. The progressive impedance model is used to predict the transmission loss (TL) provided by the panel in a normal incidence field. Corrections are then made to obtain the TL values of such panels in random incidence field. A modified B&K impedance tube was constructed for experimental evaluation. Results are presented for a Pyrex glass cylindrical tube containing motor oil, a ferromagnetic nanoparticles fluid (in the absence of a magnetic field) and air. Good agreement is obtained between the measured and analytical results for a wide range of frequencies. Also, a significant difference in TL values, particularly at low frequencies (f ? 4 kHz), is observed once the air is replaced by the fluid layer.     

Inversion for acoustic impedance of a wall by using artificial neural network

A new approach for measuring acoustic impedance is developed by using artificial neural network (ANN) algorithm. Instead of using impedance tube, a rectangular room or a box is simulated with known boundary conditions at some boundaries and an unknown acoustic impedance at one side of the wall. A training data basis for the ANN algorithm is evaluated by similar source method which was developed earlier by Too and Su [Too G-PJ, Su T-K. Estimation of scattering sound field via nearfield measurement by source methods. Appl Acoust. 1999;58:261-81 (SCI) (EI)] for the estimation of interior and exterior sound field. The training data basis is constructed by evaluating of acoustic pressure at a field point with various acoustic impedance conditions at one side of the wall. Then, the inversion for unknown acoustic impedance of a wall is performed by measuring several field data and substituting these data into ANN algorithm. The simulation result indicates that the prediction of acoustic impedance is very accurate with error percentage under 1%. In addition, one field point measurement in the present approach for acoustic impedance provides more straightforward and easier evaluation than that in the two point measurement of impedance tube.     

Analytical evaluation of the acoustic insulation provided by double infinite walls

The acoustic insulation provided by infinite double panel walls, when subjected to spatially sinusoidal line pressure loads, is computed analytically. The methodology used extends earlier work by the authors on the definition of the acoustic insulation conferred by a single panel wall. It does not entail any simplification other than the assumption that the panels are of infinite extent. The full interaction between the fluid (air) and the solid layers is thus taken into account and the calculation does not involve limiting the thickness of any layer, as the Kirchhoff or Mindlin theories require. The problem is first formulated in the frequency domain. Time domain solutions are then obtained by means of inverse Fourier transforms using complex frequencies.The model is first used to compute the sound reduction provided by a double homogeneous brick wall, with identical panels, when illuminated by plane sound waves. The results are then compared with those provided by the simplified method proposed by London, which was later extended by Beranek (London-Beranek method). The limitations of the simplified London-Beranek model, namely, its applicability only to double walls with identical mass, subjected to plane waves, and its failure to account for the coincidence effect, are overcome by the method proposed.Time signatures are produced to illustrate the different sound transmission mechanisms. Several types of body and guided waves are originated, giving rise to a complex dynamic system with multiple reflections within the solid and fluid layers and the global resonance of the system. The effect of the cavity absorption is considered by attributing a complex density to the air filling the space between the two wall panels. Absorption attenuates the dips of insulation controlled by the cavity resonances. Several simulations are then performed for different combinations of wall and air layer thickness to assess the influence of this variable on the final acoustic insulation. The influence of the air cavity on sound reduction was found to be dependent on the frequency. At low frequencies a better performance was achieved for thicker air layers, while at higher frequencies a thinner air layer is preferable. The use of wall panels with different mass resulted in the wall performing better, particularly for high frequencies.