Nonlinear modeling and analysis of rotors supported by magnetorheological squeeze film journal bearings

Meccanica - The driver coupled to a driven system through mechanical couplings is very common in rotating machinery. These couplings can present angular and parallel misalignments with more or less...     

Diffusion Model of a Non-Integer Order PIγ Controller with TCP/UDP Streams

In this article, a way to employ the diffusion approximation to model interplay between TCP and UDP flows is presented. In order to control traffic congestion, an environment of IP routers applying AQM (Active Queue Management) algorithms has been introduced. Furthermore, the impact of the fractional controller PIγ and its parameters on the transport protocols is investigated. The controller has been elaborated in accordance with the control theory. The TCP and UDP flows are transmitted simultaneously and are mutually independent. Only the TCP is controlled by the AQM algorithm. Our diffusion model allows a single TCP or UDP flow to start or end at any time, which distinguishes it from those previously described in the literature.     

Essential support of Green biset functors via morphisms

Archiv der Mathematik - In this note, we introduce a criterion to detect vanishing of essential algebras of a Green biset functor by means of morphisms. We introduce the inflation morphism and...     

A Vulnerability Parameter of Networks

Mathematical Notes - The vulnerability in a communication network is the measurement of the strength of the network against damage that occurs in nodes or communication links. It is important that...     

Catalytic Asymmetric Syntheses of Alkylidenecyclopropanes from Allenoates with Donor-Acceptor and Diacceptor Diazo Reagents

The first diastereo- and enantioselective cyclopropanation reactions of electron-deficient allenes with donor-acceptor and diacceptor diazo reagents are described. The desired enantioenriched alkylidenecyclopropanes (ACPs) were obtained in high yields with high diastereo- and enantioselectivities in the presence of Rh₂((S)-TCPTAD)₄ or Rh₂((R)-BTPCP)₄ catalysts (up to 95 % yield, >95 : 5 d.r. and 99 : 1 e.r.). This methodology gave a direct access to ACPs bearing multiple electron-deficient substituents and allows to further expand the availability of ACPs chemistry. Interestingly, during the examination of the scope of this reaction, the asymmetric intramolecular C−H insertion reaction into tert-butyl group was observed as a side reaction with up to 94 : 6 e.r.     

An effective method for the reduction of the device utilization amount in experimental realization of a fractional-order system

This study focuses on the experimental realization of the fractional-order FitzHugh–Nagumo (FHN) neuron model. Firstly, a second-order approximation function is included to the FHN neuron model to satisfy the fractional-order definition. Since these approximation functions can meet the response of the ideal system only in a limited frequency band, the identification of their center frequency is very critical. Thus, the center frequency ‘ω_c’ of this second-order approximation functions is swept until getting the spiking responses of this neuron model for the first time in this study. After the center frequency is determined, this approximation function is transferred into the ‘z’ domain by employing the Tustin discretization operator. This achieved discrete defined and fractional-order FHN neuron model becomes suitable for implementation on the digital platforms. To verify the proficiency of the proposed sweeping process experimentally, the fractional-order FHN model in ‘z’ domain is implemented on the FPGA platform. After these applications, the order of the approximation function is reduced to one. Once this followed frequency sweeping process is repeated for the first-order approximation, the fractional-order FHN neuron model, which is built by this least-order approximation function, is also implemented with the FPGA. Therefore, the reductions of the device utilization amounts by using this least-order approximation function and the importance of the specific frequency identification process are seen clearly.

     

Nanomaterials for electrochemical detection of pollutants in water: A review

The survival of living beings, including humanity, depends on a continuous supply of clean water. However, due to the development of industry, agriculture, and population growth, an increasing number of wastewaters is discarded, and the negative effects of such actions are clear. The first step in solving this situation is the collection and monitoring of pollutants in water bodies to subsequently facilitate their treatment. Nonetheless, traditional sensing techniques are typically laboratory-based, leading to potential diminishment in analysis quality. In this paper, the most recent developments in micro- and nano-electrochemical devices for pollutant detection in wastewater are reviewed. The devices reviewed are based on a variety of electrodes and the sensing of three different categories of pollutants: nutrients and phenolic compounds, heavy metals, and organic matter. From these electrodes, Cu, Co, and Bi showed promise as versatile materials to detect a grand variety of contaminants. Also, the most commonly used material is glassy carbon, present in the detection of all reviewed analytes.     

A sharp integral inequality for closed spacelike submanifolds immersed in the de Sitter space

Archiv der Mathematik - In this paper, we establish a sharp integral inequality for n-dimensional closed spacelike submanifolds with constant scalar curvature immersed with parallel normalized mean...     

A type III porous-thermo-elastic problem with quasi-static microvoids

Meccanica - In this work we study, from the numerical point of view, a one-dimensional thermoelastic problem where the thermal law is of type III. Quasi-static microvoids are also assumed within...