罗丹明6G在银纳米线阵列上的SERS光谱研究

制备出有序、均匀的活性衬底一直足表面增强拉曼散射(SERS)研究中的关键.阳极氧化法制备的多孔氧化铝膜的结构有序、均匀,为纳米金属SERS基底的制备提供了模板.以沉积了银的多孔氧化铝组装体为衬底,研究了罗丹明6G(Rh6G)分子的表面增强拉曼散射光谱.结果表明,沉积了银的多孔氧化铝模板是很好的SERS衬底,Rh6G分子在此衬底上的SERS谱强度与银纳米线在表面的显露高度有关,而其拉曼频移未受表面状态的影响,而PO43-离子的存在使SERS强度得到很大提高.     

银纳米颗粒阵列的表面增强拉曼散射效应研究

利用具有高密度拉曼热点的金属纳米结构作为表面增强拉曼散射(SERS)基底,可以显著增强吸附分子的拉曼信号.本文通过阳极氧化铝模板辅助电化学法沉积制备了高密度银(Ag)纳米颗粒阵列;利用扫描电子显微镜和反射谱表征了样品的结构形貌和表面等离激元特性;用1, 4-苯二硫醇(1, 4-BDT)为拉曼探针分子,研究了Ag纳米颗粒阵列的SERS效应.通过优化沉积时间,制备出高SERS探测灵敏度的Ag纳米颗粒阵列,检测极限可达10~(-13)mol/L;时域有限差分法模拟结果证实了纳米颗粒间存在强的等离激元耦合作用,且发现纳米颗粒底端的局域场增强更大.研究结果表明Ag纳米颗粒阵列可作为高效的SERS基底.     

表面等离子激元非线性表面增强拉曼散射效应

本文采用热蒸发法制备得到纳米Ag颗粒作为增强拉曼衬底, 利用入射光子与纳米颗粒表面价电子的相互作用机理, 激发出高能表面等离子激元, 其表面等离子形成的高能"热点"起到表面增强拉曼散射效果. 通过比较不同入射光强下的拉曼峰强, 指出纳米Ag颗粒的增强拉曼散射效果可以实现低探测光强下的高散射强度, 即纳米Ag颗粒的表面等离子激元具有非线性的表面增强拉曼散射效果, 可降低对样品的光、热损伤, 以利于拓展拉曼散射光谱的应用范围. 同时比较不同纳米Ag颗粒衬底的表面增强拉曼散射效果表明, 采用的热蒸发工艺具有较大的工艺域度, 具有较强的工艺兼容性.     

金纳米颗粒阵列基底的化学置换制备及其表面增强拉曼散射特性研究

表面增强拉曼(SERS)作为一种分析手段,具有高灵敏度、高选择性、高重复性、非破坏性等优点,在过去的几十年中,被广泛应用在成分检测、环境科学、生物医药及传感器等领域。其中以金、银等贵金属纳米颗粒薄膜在表面增强拉曼(SERS)活性基底方面得到了更为广泛的应用。SERS技术一个关键的因素是如何制设计并备具有大面积、高增强能力及高重复性、可循环使用的SERS基底。通常,贵金属纳米颗粒规则阵列结构的单元颗粒电磁增强特性及其颗粒间的电磁耦合增强特性的综合作用可大力提升SERS基底的探测性能。然而,利用传统微纳米加工方法如光刻、电子束光刻等方法制备得到的贵金属纳米阵列结构的表面粗糙度不够理想。结合光刻与化学置换方法制备金纳米颗粒四方点阵列孔洞结构,并研究其作为SERS基底的电磁增强特性。具体研究利用光刻法在硅衬底上制备了规则排列的四方点阵列孔洞结构,用磁控溅射在其表面镀上金属铁膜;接着在衬底上旋涂浓度为1.893 8 mol·L-1的氯金酸液膜,在孔洞内铁和氯金酸发生置换反应,进而孔洞生成金纳米颗粒,最终得到金纳米颗粒四方点阵SERS活性基底。采用罗丹明6G(R6G)分子作为探测分子测试不同金纳米颗粒阵列结构基底的SERS谱。实验结果表明,随着化学置换反应时间的延长,金纳米颗粒排列更加紧凑有序,SERS谱增强性能更好。     

纳米结构Si表面增强拉曼散射特性研究

为了实现低成本高灵敏度的表面增强拉曼散射效应,制备了一种基于硅表面纳米结构的表面增强拉曼散射效应（SERS）衬底。首先利用低能反应离子注入的方法对单晶硅进行表面处理,制作高陡值度的墙壁结构。然后采用电子束蒸发的方式在硅片表面蒸镀银膜,高密度的银纳米点阵列出现在侧壁表面,形成大量的热点。实验采用罗丹明6G（R6G）作为探针分子进行表征,发现获得最强拉曼信号的银膜厚度为40 nm,R6G的探测极限能达到10^-14 mol/L;同时分析衬底的重复性和稳定性,发现在614 cm^-1和1 650 cm^-1处的拉曼信号特征峰的相对标准偏差分别达到12.3%和14.3%,保存一个月的衬底测得的拉曼信号强度保持不变。本研究提供了一种操作简单、成本低的制备高灵敏度增强拉曼效应衬底的方法,制备的衬底具有高信号可重复性和高稳定性的优点。     

荧光/表面增强拉曼散射双模式纳米光学探针的构建及性能研究

提出一种新型的荧光及表面增强拉曼散射（SERS）双模式光学纳米探针。首先,通过再沉淀-包覆法合成二氧化硅包覆香豆素6的纳米颗粒,再在二氧化硅表面静电吸附多聚赖氨酸分子形成包覆层,随后通过原位还原的方法在多聚赖氨酸壳层复合银纳米颗粒,最后在银纳米颗粒表面吸附拉曼分子即形成双模式纳米探针。该探针通过二氧化硅包覆的荧光分子产生荧光信号,以多聚赖氨酸表面的银纳米颗粒作为SERS增强基底,利用拉曼分子获得SERS信号,实现了荧光及SERS双模式成像。荧光与表面增强拉曼散射相结合的双模式分析技术可同时发挥二者的优点,提高成像的分辨率和灵敏度,在生物医学领域具有重要的应用价值。     

打印技术制备表面增强拉曼散射活性基底的研究进展

表面增强拉曼散射(SERS)是一种先进的表面分析技术,可以极大提高吸附在金属表面或附近分子的拉曼散射信号。SERS技术由于其快速准确、灵敏度高、选择性好、样品制备要求低等特点,成为当前的研究热点,在化学、食品、生物、医疗等领域展现出重要的应用前景。而利用SERS技术作为一种常规分析和诊断工具面临的一个主要挑战是如何制备均匀、可重复、稳定的活性基底。打印技术操作简单、效率高、成本低,有助于设计等离激元纳米结构。通过优化“热点”增强电磁场,获得重复性好、稳定性高、增强能力强的SERS活性基底。近年来,印刷技术逐渐被应用于SERS基底的制备。主要综述了制备SERS基底的几种常用印刷技术,包括喷墨印刷、凹版印刷、丝网印刷等。分析了衬底表面润湿性、干燥温度、油墨粘度、表面张力、溶剂等因素对SERS性能的影响。总结了印刷技术制备SERS基底的研究进展,并对其潜在应用和未来发展作了展望。     

三维金字塔立体复合基底表面增强拉曼散射特性

表面增强拉曼散射(SERS)是一种广泛应用于化学反应检测、医学诊断和食品分析等领域的高灵敏度光谱技术.基底结构的构建对提高探针分子的SERS信号有非常重要的影响.本文利用聚甲基丙烯酸甲酯(PMMA)包裹银纳米颗粒制备了一种三维金字塔立体复合SERS基底,实现了对罗丹明6G (R6G)分子的高灵敏度检测.通过调节银纳米颗粒在PMMA丙酮溶液中的分散密度,实现了光在金字塔谷内的有效振荡,既保证了三维结构高密度的"热点"效应,又避免了由于金属-分子相互作用引起的吸附探针分子变形导致的信号失真等问题.同时,有效防止了银纳米颗粒的氧化,为探针分子提供更大的电磁增强作用范围,使增强的拉曼信号产生稳定的输出.此研究结果不仅提供了一种高性能、可重复使用的SERS基底的有效策略,也会对未来设计改进三维结构的SERS基底有指导意义.     

分级结构对纳米多孔金属表面增强拉曼散射特性的调控

在单级纳米多孔金属韧带上构建次级介孔,获得具有高密度"热点"的分级纳米多孔结构材料。采用时域有限差分法模拟得到分级纳米多孔结构局域电磁场强度及分布,借助拉曼光谱技术对脱合金所得分级纳米多孔金属的SERS特性进行检测。由实验和模拟结果可见,分级纳米多孔金属结构局域电磁场强度及"热点"密度均高于单级纳米多孔金属结构,表现出更好的表面增强拉曼散射特性,分级纳米多孔金和分级纳米多孔铜对结晶紫分子的检测极限均可达到10~(-11)mol·L~(-1),SERS增强因子相对于单级纳米多孔金属提高了两个数量级。次级结构的引入,可极大提高单级纳米多孔结构表面局域电磁场强度,为制备高性能SERS基底提供了新的方法。     

银纳米有序阵列SERS活性基底的制备及在膀胱肿瘤细胞检测中的应用

以多孔阳极氧化铝(porous anodic alumina,PAA)膜为模板,采用真空电子束蒸镀技术,分别在PAA多孔层以及阻挡层表面形成了银纳米孔和银纳米帽有序阵列表面增强拉曼散射(surface-enhancedRaman scattering,SERS)活性基底,并以膀胱肿瘤细胞作为分子探针,测试和分析了这两种SERS活性基底的表面增强拉曼光谱的特性。结果表明,两种SERS活性基底对膀胱肿瘤细胞的拉曼散射信号均有很好的增强作用。银纳米帽有序阵列SERS活性基底不仅具有较高的SERS增强和荧光猝灭效应,而且不存在与PAA膜中草酸根杂质相关的干扰峰,可获得膀胱肿瘤细胞拉曼散射光谱的更多细节信息。     

Applications of Raman and Surface-Enhanced Raman Scattering Techniques to Humic Substances

This paper highlights the use of Raman, FT-Raman and surface-enhanced Raman scattering (SERS) techniques for the study of humic substances. In contrast to other technologies which reveal information only about the average compositions and the kinds of functional groups present in humic substances, Raman and especially FT-Raman spectroscopies characterize the building blocks of humic substances and their changes in derivation and separation processes. Furthermore, surface-enhanced Raman scattering (SERS) techniques are able to readily detect humic substances and co-existing organic species at low concentrations typically found in natural environments and reveal definitive information about the specific groups in humic substances that bind on metal electrodes. Further applications of both Raman and SERS techniques can be extended to complicated systems as well as real environmental samples. Experiments have demonstrated: (1). the backbones of humic substances are structurally disordered carbon networks in most cases; (2). The backbones of humic substances from different sources and types are similar to each other; (3). Normal Raman spectroscopic study of humic substances should concentrate on the use of near-IR laser(s) resulting from strong fluorescence background and self-adsorption under the excitation with visible laser irradiation; (4). FT-Raman spectroscopy is the required analytical method to assess the effectivity of fractionation methods; (5). SERS spectra of humic substances on metal colloids and films are in most aces very similar to the corresponding Raman spectra of neutralized samples; (6). SERS techniques are very sensitive and highly selective, also both visible lasers and near-IR lasers can be used for SERS study; (7). SERS spectra on metal electrodes may provide additional information about the binding sites and adsorption mechanisms of humic substances on metal surfaces.     

Surface‐enhanced Raman spectra of dimethoate and omethoate

Surface‐enhanced Raman scattering (SERS) spectra are presented and analyzed for two important organophosphate pesticides, dimethoate (DMT) and omethoate (OMT). Very detailed SERS spectra were obtained by aggregated Ag hydrosols, both in aqueous suspension and dried on a glass substrate. The SERS and ordinary Raman spectra of DMT do not resemble each other, suggesting that a chemical reaction immediately occurs when DMT is adsorbed onto the metal surface. We propose that the reaction product is OMT, which is the oxygen analog of DMT, on the basis of the Raman and SERS spectra of OMT. Further support is derived from the calculated Raman spectra of DMT and OMT. Minor wavenumber and intensity differences that are observed between the SERS spectra of DMT reaction product and those of OMT could be related to different metal/adsorbate interaction modes. The results can be useful in the development of new analytical methods for the determination of pesticide residues in food. Copyright © 2010 John Wiley & Sons, Ltd.     

Adjustment and control of SERS activity of metal substrates by pressure

Metal pellets of silver and copper for surface‐enhanced Raman scattering (SERS) spectroscopy were prepared by compression with different pressures. It was found that the SERS activity of the pellet could be controlled by pressure. Enhanced Raman scattering properties of the metal pellets in the presence of adsorbed 4‐mercaptobenzoic acid (4‐MBA) with excitation at 632.8 or 514 nm could be obtained by choosing proper pressure of pellatization. The SERS peak intensity of the band at ∼1584 cm⁻¹ of 4‐MBA adsorbed on the metal pellets varies as a function of applied pressure, and which is about 1.2–32 times greater than when it is adsorbed on silver and copper particles. The calculated results of three‐dimensional finite‐difference time‐domain method (3D‐FDTD) are in good agreement with the experimental data. Moreover, no spurious peaks appear in the SERS spectra of the samples because no other chemicals are involved in the simple preparation process of the metal pellets, which will facilitate its use as an SERS‐active substrate for analytical purposes. In summary, SERS‐active metal pellets can be produced simply and cost effectively by the method reported here, and this method is expected to be utilized in the development of SERS‐based analytical devices. Copyright © 2009 John Wiley & Sons, Ltd.     

The effect of the pH on the interaction of L‐arginine with colloidal silver nanoparticles. A Raman and SERS study

Raman and surface enhanced Raman scattering (SERS) spectroscopies were used to study the pH effect (7 to 9) on the interaction of arginine (Arg) with colloidal Ag nanoparticles (AgNps). A new methodology was implemented in order to obtain reproducible SERS spectra in solution. The dependence of the Arg concentration on the stability of the AgNps is discussed. A pH increasing of the colloidal solution to the limits of the Arg pKa₂ value induces a preferential and stable Arg–metal interaction. ξ potential measurements of the Arg–AgNps system at different pH conditions studied provide information about the Arg–AgNps interaction; the pH increasing favors the interaction. SERS spectra at pH 7 indicate that the molecule interacts with the Ag surface only through the guanidinium fragment. By increasing the pH to 9, the molecule adopts a new conformation on the surface; the metal–analyte interaction is verified through the guanidinium, carboxylate and the aliphatic moieties. In addition, theoretical calculations performed by using the extended Hückel method for a model of Arg interacting with an Ag surface support the observed SERS results. Copyright © 2013 John Wiley & Sons, Ltd.     

An improved self‐assembly gold colloid film as surface‐enhanced Raman substrate for detection of trace‐level polycyclic aromatic hydrocarbons in aqueous solution

To detect trace‐level polycyclic aromatic hydrocarbons, some investigations of an improved self‐assembly method are carried out using gold colloid films for the preparation of the surface‐enhanced Raman scattering (SERS)‐active substrate. Extinction spectra and scanning electron microscopy images reveal that controllable surface plasmonic metal substrates can be obtained by increasing the temperature of (3‐aminopropyl)trimethoxysilane solution up to 64.5 °C. The SERS‐active substrates have a high enhancement factor, and they can be both easily prepared and reproducible. With the use of these substrates, different concentrations of pyrene and anthracene in aqueous solutions were detected by SERS. A further enhancement can be supported by shifted excitation Raman difference spectroscopy. Raman signals of pyrene and anthracene adsorbed on gold colloid substrates up to limits of detection at 5 and 1 nmol/l, respectively, can be obtained. The quantitative analysis shows the possibility of in situ detection of polycyclic aromatic hydrocarbons while such gold colloid film serves as a SERS‐active substrate. Copyright © 2012 John Wiley & Sons, Ltd.     

基于银胶纳米颗粒的痕量三硝基甲苯的表面增强拉曼光谱的实验研究

近年来对作为典型的硝基苯环类炸药的三硝基甲苯(TNT)的痕量检测受到越来越多的关注。将银胶纳米颗粒作为表面增强拉曼散射(SERS)基底,研究了10-6 mol.L-1的TNT的表面增强拉曼光谱的优化实验条件,重点研究了氯化钠溶液(NaCl)的含量以及碱性水解对TNT的表面增强拉曼光谱的影响。实验发现SERS样品中如果没有加入NaCl溶液,将观察不到TNT的SERS谱。加入的NaCl的含量必须在某一个范围之内才能观察到TNT的SERS谱,而且在这个范围之内,随着NaCl含量的增加,TNT的1 392cm-1处的拉曼峰出现先增大后减小的现象。对NaCl在TNT的SERS中的作用给予了理论解释。研究还发现TNT分子经过碱性水解后,与银纳米颗粒之间的吸附作用增强,其SERS谱的强度明显优于未经碱性水解的SERS结果。     

SERS as a probe for adsorbate orientation on silver nanoclusters

Surface‐enhanced Raman scattering (SERS) spectroscopy has been used to characterize multilayers of three isomeric aromatic compounds adsorbed on silver nanoclusters. The three structural isomers, all of which adsorb in the carboxylate form onto the silver nanoclusters, bind in two different geometries to the silver surface. Different molecular configurations correlate to differences in bonding strength of these molecules to the silver surface, which can be probed by SERS. For ortho‐hydroxybenzoic acid (salicylic acid), we observed red shifts of major SERS peaks in comparison to the normal Raman vibrations of nonadsorbed crystalline material. For this molecule the steric hindrance between the adjacent carboxylate and hydroxyl groups causes the carboxylate group to rotate from the common flat geometry of benzene substituents on surfaces and bond directly through one of the oxygen atoms to the surface. In this case, strong coordinative bonding between the carboxylate group and the metal surface causes the red shifts in the SERS peaks. For para‐, and meta‐hydroxybenzoic acid, the steric hindrance is less likely since the two functional groups are not at adjacent positions, and therefore these molecules adsorb on the silver surface in a totally flat geometry. For these molecules, in contrast to the ortho isomer, the CO₂ interacts with the surface through an extended π bond, and these molecules are physically adsorbed in the common flat position. Therefore, for the meta and para substituents, we do not observe significant red shifts in the SERS spectrum. Copyright © 2009 John Wiley & Sons, Ltd.     

Application of surface‐enhanced Raman scattering in cell analysis

In surface‐enhanced Raman scattering (SERS), the scattered intensity is drastically increased due to a resonant interaction with surface plasmons of coin metals. SERS is a nondestructive spectroscopic method applied also to biomedical samples. It inherits the advantages of normal Raman spectroscopy and at the same time overcomes the inherent low sensitivity problem. These properties endow SERS with exciting opportunities to be a successful analytical tool for cell analysis. SERS can be used to detect only molecules located on or close to the metallic nanostructures which can support surface plasmon resonances for the enhancement of the Raman signals. Therefore, these metallic nanostructures play a key role in the application of SERS in cell analysis. By incorporating the SERS substrates into the biosamples, molecular structural probing and cellular imaging become possible. In the past decade, analysts worldwide have developed many schemes to study the chemical changes and component distribution in cells by using SERS. In this paper, the application of SERS in cell analysis is reviewed. Copyright © 2011 John Wiley & Sons, Ltd.     

聚甲基丙烯酸甲酯间隔的金纳米立方体与金膜复合结构的表面增强拉曼散射研究

金属纳米颗粒与金属薄膜的复合结构由于其局域表面等离子体和传播表面等离子体间的强共振耦合作用,可作为表面增强拉曼散射(SERS)基底,显著增强吸附分子的拉曼信号.本文提出了一种聚甲基丙烯酸甲酯(PMMA)间隔的90 nm金纳米立方体与50 nm金膜复合结构的SERS基底,通过有限元方法数值模拟,得到PMMA的最优化厚度为15 nm.实验制备了PMMA间隔层厚度为14 nm的复合结构,利用罗丹明6G (R6G)为拉曼探针分子, 633 nm的氦氖激光器作为激发光源,研究了复合结构和单一金纳米立方体的SERS效应,发现复合结构可以使探针分子产生比单一结构更强的拉曼信号.在此基础上,研究了不同浓度金纳米立方体水溶液条件下复合结构中R6G的拉曼光谱.结果表明,当金纳米立方体水溶液浓度为5.625μg/mL的条件下复合结构中R6G的拉曼信号最强,且可测量R6G的最低浓度达10~(–11) mol/L.     

Understanding tip‐enhanced Raman spectra of biological molecules: a combined Raman,SERS and TERS study

Although conventional Raman, surface‐enhanced Raman (SERS) and tip‐enhanced Raman spectroscopy (TERS) have been known for a long time, a direct, thorough comparison of these three methods has never been carried out. In this paper, spectra that were obtained by conventional Raman, SERS (on gold and silver substrates) and TERS (in ‘gap mode’ with silver tips and gold substrates) are compared to learn from their differences and similarities. Because the investigation of biological samples by TERS has recently become a hot topic, this work focuses on biologically relevant substances. Starting from the TER spectra of bovine serum albumin as an example for a protein, the dipeptides Phe–Phe and Tyr–Tyr and the tripeptide Tyr–Tyr–Tyr were investigated. The major findings were as follows. (1) We show that the widely used assumption that spectral bands do not shift when comparing SER, TER and conventional Raman spectra (except due to binding to the metal surface in SERS or TERS) is valid. However, band intensity ratios can differ significantly between these three methods. (2) Marker bands can be assigned, which should allow one to identify and localize proteins in complex biological environments in future investigations. From our results, general guidelines for the interpretation of TER spectra are proposed. Copyright © 2012 John Wiley & Sons, Ltd.