Zr-Cu-Ni-Al-Nb大块非晶合金的晶化行为、力学性能及电化学腐蚀行为的研究

利用水冷铜模铸造法成功制备了Zr_65-xCu_17.5Al_7.5Ni ₁₀Nb_x (x=0，2，5)大块非晶合金. X射线衍射、热分析研究结果表 明，Nb的添加显著改变了非晶合金的晶化行为，促进了二十面体准晶相的形成. 各合金的准 静态压缩实验表明，Nb的适量添加有利于提高大块非晶合金的强度和塑性. 其中x=5的大块 非晶合金的抗压强度σ_b和塑性应变量ε_p 关键词： Zr基大块非晶合金 晶化行为 力学性能 耐腐蚀性能     

铜基大块非晶合金添加微量元素对腐蚀行为的影响机理研究

通过分子动力学方法模拟了Cu-Al合金液相,然后模拟降温过程得到Cu-Al非晶合金.通过计算机编程建立了Cu-Al-M非晶基体、Cu-Al-M非晶表面及吸附O原子Cu-Al-M非晶表面原子结构模型.利用实空间连分数方法,研究了添加微量合金元素Zr,Nb,Ta,V,Y,Sc对Cu基大块非晶合金的腐蚀行为的影响机理.研究发现合金元素Zr,Nb,Ta,V,Sc不向清洁Cu基非晶表面偏聚,但除Y外向有氧吸附的表面偏聚,说明有氧吸附后Cu基非晶表面偏聚发生逆转.键级积分计算表明Zr,Nb,Ta,V,Y,Sc元素均增大与氧之间的结合力,易形成氧化膜,提高Cu基大块非晶的耐蚀性.稀土Y提高Cu基大块非晶的耐蚀性可能是由于它向合金与氧化膜界面偏聚并提高了合金与氧化膜的结合力.     

非晶合金结构演变影响玻璃形成能力的分子动力学研究

通过分子动力学方法模拟了Ti75Al25、Ni50Zr50和Cu50Zr50非晶合金的玻璃转变过程, 得到并分析了平均原子体积和双体分布函数等结构参数, 并应用Voronoi多面体指数分析法统计了玻璃转变过程中二十面体及类二十面体团簇的数量, 通过分析团簇在玻璃转变过程中种类和数量的涨落趋势, 研究了非晶原子由短程序连接至中程序再至长程无序的动力学演化过程. 结果表明, 非晶合金的玻璃形成能力以及塑性变形能力与动力学演化过程中Voronoi团簇的种类和数量密切相关. 在玻璃转变过程中局部五次对称性高的团簇倾向于连接在一起形成链,从而密排整个空间, 降低系统的动力学行为从而提高玻璃形成能力. 塑性形变倾向于发生在局部五次对称性较低的区域. 在玻璃转变温度附近团簇种类和数量的突变反映出非晶合金的自组织临界行为, 蕴含着丰富的非线性动力学现象.     

Al89La6Ni5非晶合金的第一性原理分子动力学模拟

采用第一性原理分子动力学（ AIMD）方法模拟 Al89 La6 Ni5合金的退火过程,结合双体相关函数和配位多面体（团簇）分布分析了体系短程有序结构随温度的演化。结构分析表明,非晶态 Al89 La6 Ni5原子短程有序结构近似密堆排列;在非晶形成过程中,Al 原子周围短程有序结构几乎没有发生变化,而 La 和 Ni原子周围环境发生明显改变,由此推测,La 原子的加入改变了 Ni 原子周围的短程有序结构,因而增加了Al－La－Ni 体系的非晶形成能力;Al 原子和Ni原子间存在Al－Ni共价键作用,电子态密度的计算说明,费米面附近Al－p和Ni－d 之间电子的相互作用是Al－Ni原子间形成局域共价键的原因。     

Ni掺杂对Cu团簇结构稳定性的影响

采用密度泛函理论对Cu_n和Cu_n-1Ni(n=3-14)团簇的结构及稳定性进行研究.结果证明Cu_n(n=3-14)团簇的基态不是密实结构而是类似双平面的构型;计算表明:Ni掺杂增加了铜团簇的稳定性,Cu_nNi(n=2-13)团簇的最稳态结构与单质铜团簇不同而是以形成二十面体为基础的密实结构,Ni原子趋于和尽量多的Cu原子成键而最终陷入笼状团簇的中心;偶数个粒子的团簇具有相对高的稳定性,尤其Cu₃Ni,Cu₇Ni和Cu₉Ni;陷入笼状团簇内部的Ni原子带正电,使得位于表面的Cu原子带负电,从而增加了由这种团簇构成的材料的化学稳定性,如耐腐蚀性等.     

Al89La6Ni5非晶合金的第一性原理分子动力学模拟

采用第一性原理分子动力学（AIMD）方法模拟 Al89La6Ni5 合金的退火过程，结合双体相关函数和配位多面体（团簇）分布分析了体系短程有序结构随温度的演化. 结构分析表明，非晶态 Al89La6Ni5 原子短程有序结构近似密堆排列；在非晶形成过程中，Al 原子周围短程有序结构几乎没有发生变化，而 La 和 Ni 原子周围环境发生明显改变，由此推测，La 原子的加入改变了 Ni 原子周围的短程有序结构，因而增加了 Al-La-Ni 体系的非晶形成能力；Al 原子和 Ni 原子间存在 Al-Ni 共价键作用，电子态密度的计算说明，费米面附近 Al-p 和 Ni-d 之间电子的相互作用是 Al-Ni 原子间形成局域共价键的原因.     

压痕塑性变形诱导非晶合金的晶化

利用透射电镜研究了Zr₆₅Al_7.5Ni₁₀Cu_12.5Ag₅非晶合金的Vickers压痕内微观结构的变化. 结果发现，压痕塑性变形诱导非晶合金发生了晶化，在压头棱角下面的区域内有尺寸大于1 μm的晶体析出. 选区电子衍射分析表明，该析出相是稳定的CuZr₂或NiZr₂四方晶体，而没有析出该非晶合金在加热过程中的初生相二十面体准晶相,说明非晶合金的机械稳定性与热稳定性是有区别的. 打压痕过程中的温度升高是可以忽略的，本工作进一步证实了塑性变形诱导非晶合金晶化的主要动力是粘性流动而非局部热效应. 关键词： 非晶合金 塑性变形 粘性流动 局部热效应     

Fe、Co、Ni混合团簇磁性的密度泛函研究

基于13原子二十面体结构,采用密度泛函方法系统计算研究了Fe、Co及Ni单质及二元混合团簇的磁性.发现有限温度下团簇磁性随结构畸变的敏感性随Fe、Co、Ni顺序逐渐减弱,同时发现二十面体结构Fe_(13)及Co_(13)均具有不同磁矩的近简并低能态.对FeNi及CoNi混合团簇、其磁矩随组分的变化不存在反常现象,但对于FeCo混合团簇、其磁矩随组分的演化行为存在个别反常现象.我们认为:这种反常现象能够对FeCo非晶合金中的实验观测结果提供一种可能的理论解释.     

铸锭凝固组织对相应非晶合金晶化过程中二十面体准晶相形成动力学的影响

通过在真空电弧熔炼炉内对合金铸锭进行反复熔炼处理，获得到了凝固组织不同的Zr₆₅Al_7.5Cu_12.5Ni₁₀Ag₅合金铸锭.在相同的制备条件下，由凝固组织不同的合金铸锭通过吸铸法制备得到了薄片非晶合金.利用差示扫描量热法(DSC)对非晶合金的晶化动力学进行了分析.x射线衍射谱表明，在Zr₆₅Al_7.5Cu_12.5Ni₁₀Ag₅非晶合金晶化过程中，二十面体准晶相(I相)作为初生相析出.Kissinger分析结果表明，合金铸锭的凝固组织细化，相对应的非晶合金发生晶化时，I相形成与分解的有效激活能都增大，说明非晶合金及析出的I相的热稳定性都提高.从结构的遗传性角度就合金铸锭凝固组织对相应非晶合金晶化过程中二十面体准晶相的形成动力学的影响进行了讨论. 关键词： 二十面体准晶相 晶化动力学 凝固组织     

Al-Ni-RE非晶合金的晶化行为和热稳定性

本文制备了一系列Al-Ni-RE (RE=La, Ce, Y) 非晶合金薄带, 利用差示量热扫描仪和X射线衍射仪考察了非晶合金的晶化行为和初生相, 并分析了其与合金成分和原子特性间的关系. 结果表明: 在拓扑不稳定参数λ以有效原子半径修正为λ'后, 每一Al-Ni-RE非晶合金体系可由其两个临界值划分为纳米晶、纳米玻璃和玻璃三类; Al-Ni-RE非晶合金的晶化开始温度和混合焓与λ'成良好的线性关系, 即λ'能很好的表征Al基非晶合金的热稳定性. 关键词： Al基非晶 玻璃转变 初生相 热稳定性     

The atomic parameter model for the fifth and sixth transition metal quasicrystal alloys(Mc=0.5)

The forming ability of quasicrystal phase has a relationship with the atomic bond factors based on differences in atom size and electron factors.Usually,those factors or their combination are used to describe the forming ability,stability of alloys,etc.In this paper,the quasicrystal alloy forming abilities for the fifth and sixth transition metals(Y,Zr,Nb,Mo,Ru,Rh,Pd and La,Hf,Ta,W,Re,Os,Ir,Pt) based alloys have been studied by the size factor and the atomic parametric function.It has been found that an ell...     

Formation and crystallization of ZrCuTi metallic glasses

We report the suction casting of Zr₆₅Cu₂₇Ti₈ bulk metallic glasses with diameters up to 1?mm. While the substitution of Ti for Cu increases the glass forming ability significantly, the onset crystallization temperature and the width of the supercooled liquid region decrease. This decrease is due to the appearance of an icosahedral quasicrystal phase, which crystallises from the glass at a lower temperature than the Zr₂Cu devitrification product in the Zr₆₅Cu₃₅ glasses. Based on the results of recent structural studies of undercooled Ti/Zr-based alloys, this likely reflects the formation of icosahedral order in the undercooled liquid, which increases the nucleation barrier for the Zr₂Cu phase during the quench, making glass formation easier.     

Effects of niobium on thermal stability and corrosion behavior of glassy Cu-Zr-Al-Nb alloys

The corrosion behavior of Cu_95−xZr_xAl₅ (x=40, 42.5 and 45 at.%) in 1 N HCl, 3 mass% NaCl and 1 N H₂SO₄ solutions was studied. As Zr content increases, the corrosion resistance is slightly enhanced. In order to improve the corrosion resistance of the Cu-Zr-Al glassy alloy, Nb was selected to substitute Cu. Although the supercooled liquid region ΔT_x of the Cu-Zr-Al glassy alloys decreases with increasing Nb content, the alloys still retain high glass-forming ability and bulk glassy samples with 1.5 mm diameter can be obtained when up to 5 at.% Nb was added. It is found that the addition of Nb results in improvement of the corrosion resistance of the glassy Cu-Zr-Al alloys.     

Quadrupole splitting on57Fe nuclei and local structure of the amorphous alloys Ni−Zr,Ni−Ta

Quadrupole splittings on⁵⁷Fe nuclei were studied by Mössbauer spectroscopy in amorphous and crystalline Ni-based alloys with 37 at .% Zr and 25–50 at .% Ta with 0.5 at .%⁵⁷Fe addition. Quadrupole splitting distributions and then the topological short range in Ni?Ta alloys were found to be similar to that of the Ni₃Ta intermetallic compound. The distribution of splittigs for Ni?Zr alloy is similar to that of its crystalline counterpart.     

d Band structure and alloying effects in crystalline and amorphous ZrCo and ZrNi

We study the electronic structure by photoemission of amorphous Zr₇₀Co₃₀, Zr₇₅ Ni₂₅ and crystalline Zr₂Co, Zr₂Ni. The results show that the electronic structures for the amorphous and crystalline states are quite similar. The valence bands of the amorphous alloys do not present features attributable specifically to the amorphous state. In both cases the valence band indicate a strong localization of the d levels and can be interpreted as a superposition of the Zr 4d levels in the upper part of the band, the Co or Ni 3d levels being centered in the low part of the part of the band. The present results and previous ones on ZrCu amorphous alloys show that the binding energies of the 3d levels increase with the distance between the alloying elements in the periodic table. Moreover the full width at half maximum of Co, Ni or Cu d levels is noticeably less than for pure elements. These results are considered at the light of atomic structure and theoretical models ; in particular it seems that the coordination number of the atoms plays a dominant role in the structure of the d levels.     

Magnetic and magneto-optical properties of heusler alloys based on aluminium and gallium

The authors have studied a number of alloys of the type X₂YZ, where X represents a 3d transition metal (or Cu), Y a second 3d transition metal or one of the elements La, Th, Zr, Hf, Ta, Nb, W or Mo, and Z either Al or Ga. It was found that only a limited number of these combinations leads to the cubic L2₁ Heusler-type compounds. The lattice constants of these compounds were determined. The formation of the Heusler L2₁-type phase was compared with model predictions. A study to the magnetic properties and the room temperature Kerr rotation of the L2₁-type Heusler compounds showed that there is hardly any correlation between the Kerr rotation in the ferromagnetic Heusler alloys and the corresponding magnetization. In the Co₂YAl and Co₂YGa series the moment per Co atom and the electronegativity difference between Co and the Y component showed a linear dependence.     

非晶态合金FeTmB的磁矩和居里温度

本文系统地报道单辊液淬方法制备FeTmB(Tm=Ti,V,Cr,Mn,Zr,Nb,Mo,Ta,W)非晶态合金的磁性,讨论了3d,4d,5d元素的加入对非晶态FeB合金的磁矩和居里温度的影响。实验结果表明在非晶态FeTmB合金系中Fe原子磁矩都在2.0μ_B左右。Tm原子在非晶态Fe基合金中比在相应的晶态合金中显示更强的局域特性。Tm原子的磁矩与元素的外层电子数有关,IVB(Ti),VB(V),VIB(Cr),VIIB(Mn)族原子的磁矩分别约为4,5,4,3μ_B,Tm的磁矩与铁原子磁矩反平行耦合。合金磁矩随Tm含量的变化率dμ/dx与混合模型的计算值相符合。用虚拟束缚态讨论,得到IVB(Ti),VB(V)族元素的虚拟束缚态在费密面以上,VIB(Cr),VIIB(Mn)族元素的虚拟束缚态与费密面交迭。 关键词：     

Electrochemical corrosion and oxidation resistances of Zr_(60)Ni_(21)Al_(19) bulk amorphous alloys

Electrochemical corrosion and oxidation resistances of Zr 60 Ni 21 Al 19 amorphous alloy were studied. The ternary amorphous alloy exhibits greater positive potential than its crystalline counterpart and 0Cr19Ni9Ti stainless steel. Its weight loss result measured in 2 mol/L HCl solution is in agreement with the potentiodynamic curve. But there is no obvious difference in the oxidation resistances between Zr 60 Ni 21 Al 19 amorphous and its crystalline alloys. They both exhibit high oxidation resistance.     

Microscopic collective dynamics of atoms in the amorphous metallic alloy Ni33Zr67

The structural properties and microscopic collective dynamics of atoms in the amorphous metallic alloy Ni₃₃Zr₆₇ are studied using molecular dynamics simulations with a pair-additive model potential. The calculated equilibrium structural and dynamic characteristics are compared with experimental data on neutron diffraction and inelastic X-ray scattering. Theoretical analysis of the structural relaxation of microscopic density fluctuations for amorphous metallic alloys is performed within the Lee’s recurrent relation approach. The results of theoretical calculations for the intensity of scattering I(k, ω) for the amorphous metallic alloy Ni₃₃Zr₆₇ are in good agreement with the results of computer simulation and experimental inelastic X-ray scattering data. The low-frequency excitations observed in the longitudinal current spectra are related to the vibrational motions of individual atom clusters, which include Ni and Zr atoms.