Enhanced third harmonic reflection and diffraction in Silicon on Insulator photonic waveguides

Enhanced third harmonic (TH) generation from Silicon-On-Insulator (SOI) planar waveguides as well as SOI photonic crystal (PhC) slabs is studied in different angular configurations, both in the visible and infrared energy ranges. In the SOI planar waveguide, the multilayer structure causes the optical properties such as TH reflection to be different from those of bulk silicon samples. This behavior is well reproduced by calculations of TH reflectance.Measurements of third-harmonic reflection and diffraction from one-dimensional PhC slabs etched in the SOI waveguide are also reported. The angular positions of TH peaks at various diffraction orders agree well with those calculated from a nonlinear grating equation. Both reflection and diffraction processes contribute to enhanced TH generation efficiency in the PhC slabs.TH reflectance measurements performed on PhC slabs in the near infrared show a resonant interaction between the incident beam and the photonic structure, dependent on the angle of incidence. This leads to a nonlinear conversion efficiency which is strongly enhanced with respect to that of the SOI waveguide, due to the excitation of strong local fields associated with the presence of photonic modes in the PhC slab.     

Analysis of single-mode condition and high-order modes discrimination in photonic crystal VCSEL

A new technique for analyzing the single-mode condition and mode discrimination of high-order modes in photonic crystal VCSEL is proposed and reported in this paper. The technique proposed is a semi-empirical approach that uses analytical analysis based on experimental data. For that purpose, single- and multimode photonic crystal VCSEL devices are fabricated and characterized for comparison of device performance. The mode width for first- and second-order mode of PhC VCSEL is computed for analyzing the mode behavior. In order to verify the findings, the fabricated single- and multimode devices are analyzed using finite difference frequency domain technique for the purpose of showing the loss as a function of mode order for the PhC VCSEL. The results show close agreement between the computed and experiment findings, justifying the use of the proposed semi-empirical technique for analyzing single-mode condition and of high-order modes discrimination in photonic crystal VCSEL.     

Analysis of multiple reflections in hybrid photonic crystal multimode interference coupler

In this paper the analysis of multiple reflections in photonic crystal (PhC) multimode interference (MMI) couplers using eigen-mode expansion method is presented. The analysis is conducted on a hybrid PhC structure which consisted of 1-D PhC multimode waveguide sandwiched between 2-D PhC input/output waveguides. In PhC multimode waveguide, where the mechanism of wave confinement is not due to total internal reflection but due to photonic bandgap properties, the reflectivity at 2-D PhC facet wall would be very large for all the guided modes in the waveguide when ever the image formed due to MMI effect does not coincides with the output access waveguide.     

Reconfigurable photonic crystal circuits

We describe progress in the field of tuning, (re)configuration of Photonic crystal (PhC) based devices with a particular emphasis on our recent concepts and techniques that we have developed to tune and/or reconfigure the properties of photonic crystal nanocavities. We show how our hybrid approach based on photosensitive material and tapered silica fiber can tune the (Q, λ) properties of preexisting Photonic crystal cavities. We describe our alternative techniques to create ‘a posteriori’ spatially (re)configurable high‐Q cavities in a PhC platform. We show that optofluidics – the fusion of microfluidics with photonic devices – offers an unquestionable added value to the quest of a truly versatile, (re)configurable photonic crystal based photonic chip.     

二维三角晶格光子晶体波导的出射光集束传播

为了解决光子晶体波导出射端光场控制, 同时解决二维三角晶格光子晶体波导出射光辐射困难的问题。利用二维三角晶格光子晶体设计了一种新型光子晶体波导出射口结构。在二维三角晶格光子晶体波导出射端引入两个微腔, 通过光波与微腔发生共振, 形成类似于三个点光源干涉的出射光, 同时进一步提出波导出射端喇叭口干涉出射光定向辐射的设计。通过这种微腔喇叭口设计, 利用时域有限差分法分析结果表明光波实现很好的定向辐射, 并且辐射距离显著提高。     

Tunable photonic crystal circuits: concepts and designs based on single-pore infiltration

We demonstrate that the infiltration of individual pores of certain two-dimensional photonic crystals with liquid crystals and (or) polymers provides an efficient platform for the realization of integrated photonic crystal circuitry. As an illustration of this principle, we present designs for monomode photonic crystal wave-guides and certain functional elements, such as waveguide bends, beam splitters, and waveguide intersections. These devices exhibit very low reflection over broad frequency ranges. In addition, we discuss the inherent tunability of these devices that originates in the tunability of the infiltrated material.     

Design and analysis of coherent OCDM en/decoder based on photonic crystal

The design and performance analysis of a new coherent optical en/decoder based on photonic crystal (PhC) for optical code -division -multiple (OCDM) are presented in this paper. In this scheme, the optical pulse phase and time delay can be flexibly controlled by photonic crystal phase shifter and time delayer by using the appropriate design of fabrication. According to the PhC transmission matrix theorem, combination calculation of the impurity and normal period layers is applied, and performances of the PhC-based optical en/decoder are also analyzed. The reflection, transmission, time delay characteristic and optical spectrum of pulse en/decoded are studied for the waves tuned in the photonic band-gap by numerical calculation. Theoretical analysis and numerical results indicate that the optical pulse is achieved to properly phase modulation and time delay, and an auto-correlation of about 8 dB ration and cross-correlation is gained, which demonstrates the applicability of true pulse phase modulation in a number of applications.     

Biomimetic subwavelength antireflective gratings on GaAs

We have developed a simple and scalable bottom-up approach for fabricating moth-eye antireflective coatings on GaAs substrates. Monolayer, non-close-packed silica colloidal crystals are created on crystalline GaAs wafers by a spin-coating-based single-layer reduction technique. These colloidal monolayers can be used as etching masks during a BCl(3) dry-etch process to generate subwavelength-structured antireflective gratings directly on GaAs substrates. The gratings exhibit excellent broadband antireflective properties, and the specular reflection matches with the theoretical prediction using a rigorous coupled-wave analysis model. These bioinspired antireflection coatings have important technological applications ranging from efficient solar cells to IR detectors.     

Study on modulation of near infrared radiation based on plasma photonic crystal

In this paper, a plasma photonic crystal (PPC) for infrared radiation modulation which is composed of indium tin oxide (ITO) and plasma is proposed. The performance of plasma photonic crystal in near infrared radiation modulation is researched by transfer matrix method (TMM). The simulation results show that the near infrared radiation pass band can be adjusted by the changing of plasma frequency of plasma. The reflection to near infrared radiation by plasma photonic crystal increases with plasma frequency and that of absorption decreases. In addition, the modulation performance of the plasma photonic crystal at different incidence wave angles is also studied. The results show that the incident wave angles have little effect on the transmission of plasma photonic crystal in near infrared band. The reflection of the plasma photonic crystal to near infrared radiation decreases with increasing of the incident wave angle, but that of the absorption increases with the incident wave angle. Therefore, the proposed plasma photonic crystal has a potential application in tunable near infrared filter devices.     

Design of low-loss tapered waveguide by applying photonic-crystal-based microlenses in telescopic structure

In this paper, the design of low-loss tapered waveguides by applying photonic-crystal-based microlenses is presented. The microlenses are realized by using two-dimensional photonic crystal (PhC) structures with a hexagonal periodic lattice of air-holes. In order to make the PhC structures behave as homogeneous and isotropic microlenses, the PhC structures are designed to operate in the low-frequency domain with light wavelength sufficiently larger than the PhC lattice constant. The effective indices of the PhC are calculated and the structures are properly arranged in microlenslike shapes. By monolithically integrating the effective microlenses in the tapered area between the two optical waveguides with different core dimensions, the wavefront of the eigenmode can be coupled from the larger core to the smaller core effectively and also the radiation loss in the tapered area between the two connected optical waveguides can be effectively suppressed. The results show that the PhC-based microlens in the telescopic structure can serve as an optical element in the tapered waveguide with the advantages of low loss, high efficiency and compactness.     

Analysis and design of efficient coupling in photonic crystal circuits

A rigorous analysis and design of efficient coupling from photonic crystal (PhC) waveguides into conventional dielectric waveguides is reported. Closed-form expressions for the reflection and transmission matrices that completely characterize the scattering that occurs at the interface are derived based on an eigenmode expansion technique and a Bloch basis. Analytic expressions are used to analyze the reflection into PhC waveguides. We obtain that negligible reflection can be achieved by choosing a certain interface within a PhC unit cell. Furthermore, analytic expressions are used to design a novel and compact coupler structure in order to achieve high coupling efficiency when broad dielectric waveguides are considered. Thereby, transmission efficiencies near 100 from the fundamental guided Bloch mode into the fundamental waveguide mode are achieved.     

微纳加工技术在光电子领域的应用

纳米光电子器件正在成为下一代光电子器件的核心。文章介绍了电子束光刻和电感耦合等离子体刻蚀为代表的徽纳加工技术在光电子学器件中的应用。主要包括量子点激光器、量子点THz探测器和光子晶体器件。     

基于二维六方氮化硼材料的光子晶体非对称传输异质结构设计

二维六方氮化硼(hexagonal boron nitride,hBN)材料在产生光学稳定的超亮量子单光子光源领域有着潜在应用,有望用于量子计算和信息处理平台,已成为研究热点.而光学非对称传输设备是集成量子计算芯片中的关键器件之一.本文从理论上提出了一种基于hBN材料光子晶体异质结构的纳米光子学非对称光传输器件.运用平面波展开法研究了光子晶体的能带结构与等频特性,从理论上分析了hBN异质结构中可见光波非对称传输的可行性.同时,采用时域有限差分方法研究了可见光波段异质结构的晶格常数和半径对透射光谱的影响.研究结果显示,该结构实现了在610—684 nm波长范围内TE偏振光的非对称传输,在652 nm波长处正向透射率达到0.65,反向透射率为0.006,非对称传输透射对比度高达0.98.本文提出的结构模型为基于hBN的新型纳米光子器件设计提供了新的可能性,可用于不同功能光学器件的集成设计.     

The study of electro-optical sensor based on slotted photonic crystal waveguide

A compact and sensitive electro-optical sensor based on slotted photonic crystal waveguide (S-PhCW) is demonstrated. The electro-optical sensor can be realized in photonic crystal (PhC) slabs of silicon in Silicon-on-Insulator (SOI). Nonlinear optical polymer is used as infiltration. By applying three-dimensional finite difference time domain (3D-FDTD), the sensitivity and quality factor of electro-optical sensor with different slotted waveguide width are calculated. In addition, sensitivity and the optical properties such as transmission spectrum and field distributions are compared between electro-optical sensor based on line defect photonic crystal waveguide (W1-PhCW) and that based on slotted photonic crystal waveguide (S-PhCW). Simulation results demonstrate that, compared with electro-optical sensor based on line defect photonic crystal waveguide, the sensitivity and quality factor is improved by 30 times and 6.6 times respectively in sensor based on slotted photonic crystal waveguide. Besides, the proposed PhC sensor devices have the advantage of a compact structure with the potential for monolithic integration with optical-to-electrical on-chip conversion and detection.     

Supercontinuum generation in a two-dimensional photonic kagome crystal

We demonstrate the generation of ultrabroad spectra in a photonic crystal fiber with a kagome-lattice transverse structure. This two-dimensional periodic photonic lattice allows for strong confinement of light without employing defect states nor using photonic bandgap guiding. Light guiding is mediated by total internal reflection in the intersections of the lattice structure, similar to tapered or micro-structured fibers. The kagome lattice structure is manufactured from a soft glass with a high nonlinearity. Using a Ti:sapphire oscillator as a pump source, we observe for the first time impressive supercontinuum generation in the guided modes of a 2D photonic lattice. Supercontinuum generation is caused by fission and radiation of higher-order solitons in the anomalous dispersion range. Our spectrum encompasses the spectral range from 200 to 1750 nm. The dependence of the continuum on coupling spot location, fiber length, and pump wavelength and power as well as on pulse duration and polarization state is investigated. Using a numerical simulation for the lattice structure, pulse propagation through this structure is theoretically studied. Our model reveals the mechanism of supercontinuuum generation in the 2D photonic structure and explains the essential experimental findings.Electronic supplementary material to this article is avaiable at and accessible for authorized users.     

基于光子晶体异质结的高效太阳能电池反射器研究

设计了一种可用于太阳能电池反射器的二维三角晶格光子晶体异质结结构.采用传输矩阵法对该结构在可见至近红外波长范围入射电磁波的反射率进行了模拟计算,并比较了不同入射方向下反射率的变化.结果表明,光线垂直入射时,该结构光子晶体对近红外波段入射光可实现完全反射|随着偏转角度的增大,在整个可见-近红外波段均显示出极高的反射特性.该结构有望用于制作覆盖整个可见光-近红外波段的高效全方位反射器.     

Photonic crystal cavities and integrated optical devices

This paper gives a brief introduction to our recent works on photonic crystal (PhC) cavities and related integrated optical structures and devices. Theoretical background and numerical methods for simulation of PhC cavities are first presented. Based on the theoretical basis, two relevant quantities, the cavity mode volume and the quality factor are discussed. Then the methods of fabrication and characterization of silicon PhC slab cavities are introduced. Several types of PhC cavities are presented, such as the usual L3 missing-hole cavity, the new concept waveguide-like parallel-hetero cavity, and the low-index nanobeam cavity. The advantages and disadvantages of each type of cavity are discussed. This will help the readers to decide which type of PhC cavities to use in particular applications. Furthermore, several integrated optical devices based on PhC cavities, such as optical filters, channel-drop filters, optical switches, and optical logic gates are described in both the working principle and operation characteristics. These devices designed and realized in our group demonstrate the wide range of applications of PhC cavities and offer possible solutions to some integrated optical problems.     

Antireflective cerium and samarium oxide coatings for silicon photoelectric devices

We report the optical transmission spectrum of cerium and samarium oxide films, and the use of these materials as antireflective coatings on silicon photoelectronic transucers. It is shown that the oxide films exhibit high transmission in the 400–1200 nm spectral region and make it possible to reduce the reflection coefficient from the silicon surface to 1.2–1.9%, and the integrated reflection coefficient for radiation in the range 400–1000 nm may be reduced to 8–9 %. It is shown that an antireflective coating of cerium or samarium oxide increases the short circuit photocurrent from silicon photoelectric devices by more than 40%.Samarsk State University. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 9, pp. 20–24, September, 1994.     

二维函数光子晶体

光子晶体是由两种或两种以上不同介电常数材料所构成的周期性光学纳米结构.光子晶体结构可分为一维、二维和三维,其中二维光子晶体已成为研究的热点.可调带隙的二维光子晶体可以设计出新型的光学器件,因此,对它的研究具有重要的理论意义和应用价值.本文提出的二维新型函数光子晶体可以实现光子晶体带隙的可调性.所谓二维函数光子晶体,即组成它的介质柱的介电常数是空间坐标的函数,它不同于介电常数为常数的二维常规光子晶体.二维函数光子晶体是通过光折变非线性光学效应或电光效应使介质柱的介电常数成为空间坐标的函数.运用平面波展开法给出了TE和TM波的本征方程,由傅里叶变换得到二维函数光子晶体介电常数ε(r)的傅里叶变换ε(G),其傅里叶变换比常规二维光子晶体的复杂.计算发现当介质柱介电常数为常数时,其傅里叶变换与常规二维光子晶体的相同,因此二维常规光子晶体是二维函数光子晶体的特例.在此基础上具体研究了二维函数光子晶体TE波和TM波的带隙结构,其介质柱介电常数函数形式取为ε(r)=k·r+b,其中k,b为可调的参数.并与二维常规光子晶体TE波和TM波的带隙结构进行了比较,发现二维函数光子晶体与二维常规光子晶体TE波和TM波的带隙结构有明显的区别,二维函数光子晶体的带隙数目、位置以及宽度随参数k的变化而发生改变.从而实现了二维函数光子晶体带隙结构的可调性,为基于二维光子晶体的光学器件的设计提供了新的设计方法和重要的理论依据.     

Symmetrically glass-clad photonic crystal nanocavities with ultrahigh quality factors

We design and fabricate ultra-high-quality (Q) photonic nanocavities in a symmetrically glass-clad silicon (Si) two-dimensional (2D) photonic crystal (PhC) structure. We theoretically investigate the dependence of the refractive index of the glass on the Q factors for asymmetric and symmetric structures. We show that the index-symmetric distribution of the glass is a critical factor to realize ultrahigh Q factors for glass-clad 2D PhC structures. We fabricate symmetrically glass-clad Si PhC nanocavities and achieve a record Q factor of 1×10(6), comparable with the highest Q factors of nanocavities in air-bridge structures.