弱双折射光纤布喇格光栅反射偏振对温度响应特性的研究

理论分析了切趾弱双折射光纤布喇格光栅反射偏振相关特性与温度之间的关系.数值模拟了切趾弱双折射光纤光栅的反射谱、偏振相关损耗和差分群时延随波长变化曲线.实验测出了不同温度下反射谱、偏振相关损耗和差分群时延随波长变化曲线.根据实验结果对偏振相关损耗和差分群时延的变化情况作出了分析.反射偏振相关损耗呈现两个峰值,随温度增加两峰漂移程度相同,表明偏振相关损耗无明显差异.差分群时延最大值随温度增加成线性向长波方向漂移,证明了光纤光栅正交模损耗变化的等同性.综合理论分析与实验结果表明:切趾弱双折射光纤布喇格光栅的偏振特性随温度产生明显的变化,其正交模变化呈现等比例特性.     

一种改变光纤光栅布喇格波长的有效方法

本文报道了一种改变光纤光栅布喇格波长的有效方法。写于我氢光纤上的光纤光栅经过高温退火后,再利用紫外激光对其进行均匀曝光,不但能够有效改变其布喇格波长,而且还可以提高其反射效率。此种方法能很好地解决光纤光栅制作过程中的工作波长控制问题。     

聚合物太赫兹光纤布喇格光栅

研究了一种基于聚合物太赫兹光纤的太赫兹光纤布喇格光栅.通过二氧化碳激光器或紫外激光器点对点加工聚合物太赫兹光纤,实现聚合物太赫兹光纤直径的周期性调制,从而实现太赫兹光纤布喇格光栅的周期性折射率调制.基于有限元方法和光纤布喇格光栅相关理论,考虑反射峰波长、反射率、带宽、光纤长度、光纤直径和光纤直径形状变化程度等因素,研究了太赫兹光纤布喇格光栅的特性.理论模拟表明,反射峰波长和光栅周期存在与传统光学波段光纤布喇格光栅不同的非线性关系.     

使用FBG及更短光纤的高效Er3+-Yb3+共掺双包层光纤放大器

提出在光纤放大器中,使用光纤布喇格光栅作为泵浦光反射镜,所需的双包层光纤可以缩短,同时至少保持了与没有光纤布喇格光栅作为反射镜时光纤放大器相同的性能.基于速率及传输方程,对使用和不使用光纤布喇格光栅的铒、镱共掺双包层光纤放大器的性能进行了数值模拟.结果表明,使用光纤布喇格光栅作为反射镜时光纤放大器可以获得与无光栅时相同的输出功率,但仅仅需要后者长度一半的光纤,无论是前向泵浦还是后向泵浦.对后向泵浦方式并使用光纤布喇格光栅作为反射镜,可获得最高的输出功率及光增益,同时使用了较短的光纤.     

FBG滤波的级联LPFG温度和折射率传感装置

利用长周期光纤光栅具有较高的温度、折射率灵敏度,以及光纤布喇格光栅具有较高反射效率的特点,设计了一种基于光纤布啦格光栅滤波的级联长周期光纤光栅温度和折射率传感装置.利用光纤布喇格光栅的高反射率,将级联长周期光纤光栅干涉波峰的局部功率反射到功率计中,实现了温度和折射率的测量.基于信号叠加原理,对光纤布喇格光栅滤波的级联长周期光纤光栅温度和折射率传感方法的可行性进行了分析.将实际测得的功率计示数与温度以及折射率的变化进行二项式拟合,其确定系数分别为0.9990和0.9959,表明该传感方法可用于温度和折射率的精确测量.最后对该装置的稳定性做了一系列的测试,验证了该传感系统具有较高的稳定性.     

980nm半导体激光器输出光谱特性的改善

为了改善980nm半导体激光器的输出光谱特性,采用传输矩阵分析法推导了双布喇格光纤光栅谐振腔的传输表达式,对布喇格光纤光栅长度和谐振腔腔长对输出光谱的影响进行模拟仿真,结果表明布喇格光纤光栅长度对输出光谱的影响大于谐振腔腔长对输出光谱的影响,加长布喇格光纤光栅长度能压缩输出光谱线宽.在980nm半导体激光器尾纤上写入不同布喇格光纤光栅长度的双布喇格光纤光栅谐振腔,验证了引入双布喇格光纤光栅谐振腔在压缩980nm半导体激光器输出光谱线宽的同时改善了其输出光谱的稳定性.当环境温度在0~75℃范围内变化时,980nm半导体激光器输出中心波长仅变化0.06nm.     

光纤光栅径向受力检测技术

对光纤布喇格光栅径向受力特性进行了理论与实验研究,给出了光纤布喇格光栅的径向受力灵敏度,并利用可调F-P标准具设计了一套解调光纤布喇格光栅反射峰劈裂值的实验系统.此系统消除了外界环境对F-P标准具初始腔长的干扰所引起的误差,系统的准确度达到了0.02 nm.     

基于喇曼/掺铒光纤混合放大的长距离布喇格光栅传感器系统

提出了一种提高长距离光纤布喇格光栅信噪比以进行准分布测量的新方法.本方法基于双向喇曼放大和双掺铒光纤结构,喇曼光纤放大器对布喇格光栅信号进行低噪音的双向放大,置于远处的掺铒光纤利用剩余的泵浦功率产生自发辐射光和放大传感信号,为第二段掺铒光纤之后的远处布喇格光栅传感器提供光以及补偿由于长距离传输造成的光纤损耗.实验显示传感器系统的性能得到显著提高.使用功率为240 mW的单个普通泵浦,分布在50 km光纤上的FBG均可获得15 dB的良好信噪比,比混合放大前提高了10 dB.     

基于掺铒光纤/喇曼混合放大的光纤激光器布喇格光栅传感系统

提出了一种提高长距离光纤布喇格光栅信噪比以进行准分布测量的新方法.该方法基于掺铒光纤/喇曼混合放大的光纤激光器结构,掺铒光纤和滤波器构成的环形结构产生激光作为光源,喇曼光纤放大器对布喇格光栅信号进行低噪音的双向放大,置于远处的掺铒光纤利用剩余的泵浦功率产生自发辐射光和放大传感信号,为远处掺铒光纤之后的布喇格光栅传感器提供信号光以及补偿由于长距离传输造成的光纤损耗.实验显示,与使用宽带光源的传感方式相比,系统的性能得到显著提高,仅使用小功率泵浦,分布在50 km光纤上的FBG均获得了超过58 dB的优良信噪比.     

用布喇格光纤光栅传感器测定口腔复合树脂材料光固化收缩与温度演化特性

复合树脂材料已成为重要的牙齿美容修复材料.本文利用两种布喇格光纤光栅传感器测定了口腔复合树脂材料在光固化过程中的收缩与温度演化特性.一种为普通的光纤布喇格光栅,另一种为经过了化学镀镍的光纤布喇格光栅,同时埋入复合树脂样品中,用光照射使其固化,测得光纤布喇格光栅在固化过程中温度和应力随时间的演化曲线.实验结果表明,在光固化过程中,因为聚合反应,树脂产生了强烈的收缩应力和温度变化.掌握复合树脂的光固化收缩特性和温度变化特性对不断改良材料性能以及优化口腔材料的治疗效果具有实际意义.     

Analysis of sampled fiber Bragg gratings in polarization-maintaining fiber

A novel type of sampled fiber Bragg gratings （FBGs） written in polarization-maintaining fiber （PMF） is proposed. The reflection spectrum, time delay, and group velocity dispersion （GVD） of the gratings are analyzed. In addition, the reflection spectrum is optimized by apodization. The scheme of multi-wavelength output based on the gratings is proposed, which could be used as a multi-wavelength polarization filter in the density wavelength division multiplexed （DWDM） system.     

Combined time-wavelength interrogation of fiber-Bragg gratings based on an optical time-domain reflectometry

A reflectometric method for the combined time-wavelength multiplexing of the fiber-Bragg-grating (FBG) signals is proposed. The method is based on the spectral filtering of the probe pulses generated by a fiber-optic reflectometer using a bandpass filter consisting of a fiber circulator and FBG. The interrogated Bragg gratings are recorded on a fiber line in groups with identical resonance wavelengths inside groups and different wavelengths from different groups. The separation of the signals of FBGs that have different resonance wavelengths is due to the tuning of the filter passband, and the separation of the signals of FBGs with identical wavelengths involves the time separation of the responses of the Bragg gratings to the probe pulse. The threshold sensitivity of the method in the measurement of the relative elongation of FBG is 0.5 × 10^?4. The considerable practical prospects of the method are related to its simplicity, reliability, and the application of the conventional reflectometric equipment.     

A New Method of Solving Multimode Coupled Equations for Analysis of Uniform and Non-Uniform Fiber Bragg Gratings and Its Application to Acoustically Induced Superstructure Modulation

A new and simple mathematical formulation that is employed to analyze numerically coupled-mode equations modeling uniform and non-uniform gratings in optical fiber is investigated. This method would be straightforward and thus beneficial to solve multimode coupled equations in comparison with a previously used fundamental matrix method, and the Runge--Kutta algorithm. The new formulation proposed in this study is applied to calculate transmission and reflection spectra of core mode and higher-order cladding modes of acoustically induced superstructure modulation caused by microbending through fiber Bragg gratings (FBGs). Co-directional and contra-directional couplings based on acoustically induced modulation in FBGs have been discussed for a variety of induced coupling coefficients.     

用紫外光直接在光纤内写入布拉格反射光栅的实验研究

用紫外光直接在光纤内写入布拉格反射光栅的实验研究杜卫冲谭华耀＊刘颂豪华南师范大学，激光生命科学研究所，广州５１０６３１＊香港理工大学，电机系自１９８９年Ｍｅｌｔａｚ［１］首次提出采用两束波长位于掺Ｇｅ－石英光纤吸收带内的相干紫外激光相干涉，从侧面照射...     

取样布拉格光纤光栅的传输矩阵

根据在一般坐标系下均匀布拉格光纤光栅的传输矩阵,得到了取样布拉格光纤光栅的传输矩阵。利用傅里叶变换得到了取样布拉格光纤光栅的谐振方程。结果表明,在不考虑平均折射率变化的情况下,谐振峰的位置是由光栅的周期和取样周期共同确定的,与取样时的占空比、光栅长度和耦合系数没有关系。类似于物理光栅,取样布拉格光纤光栅也存在缺级现象,给出了出现缺级的条件。     

Proposal and realization for a broadband all-fiber non-uniformly spaced multi-channel optical filter

In this paper, we propose a broadband all-fiber non-uniformly spaced multi-channel optical filter, which is based on the utilization of paired multi-channel fiber Bragg gratings (FBGs) located at two arms of an interferometer. Unlike the traditional optical comb filter, the channel spacing may be either linearly or nonlinearly chirped. Serving as an example, two identical linearly-chirped 51-channel FBGs have been successfully employed to demonstrate the proposed filter experimentally.     

可分离温度影响的FBG应变测量方法

光纤布拉格光栅在通信和传感领域具有广泛的应用。利用光纤布拉格光栅中心波长的偏移，可以测量温度和应变等多种物理量，但必须解决光栅对温度和应变的交叉敏感问题。该文简要分析了光纤光栅作为传感器的基本原理及其优点，设计了利用参考光栅法分离温度影响以及利用掺铒光纤的自发发射放大特性分离温度影响的2种应变测量方法。最后，介绍了一种利用倾斜光纤光栅的主模和边模对布拉格光栅中心波长的偏移进行解调的方法，该方法成功地分离了温度对应变测量的影响。     

Experimental investigation of pre-irradiation effect on radiation sensitivity of temperature sensing fiber Bragg gratings

The effect of pre-irradiation on radiation sensitivity of fiber Bragg gratings(FBGs) is verified experimentally.FBGs are fabricated in photosensitive optical fibers and single mode fibers with Ge-concentration in a range from 3 mol% to 23.37 mol% in the core.In experiments,the FBGs are subjected to twice γ-radiation exposures to a Co60 source at a dose-rate of 0.1 Gy/s up to a total dose of 50 kGy.Pre-irradiation treatment can reduce the temperature sensitivity variation of FBGs by 18.12%-35.91%,as well as Bragg wavelength shift(BWS) by 8%-27.08 %.Our research demonstrates that pre-irradiation treatment is a feasible method to improve the radiation tolerance of FBGs.     

Sensing properties of fiber Bragg gratings in small-core Ge-doped photonic crystal fibers

We report about fiber Bragg gratings (FBGs) inscribed in two different types of small-core Ge-doped photonic crystal fibers with a UV laser. Sensing properties of the FBGs were systematically investigated by means of demonstrating the responses of Bragg wavelengths to temperature, strain, bending, and transverse-loading. The Bragg wavelength of the FBGs shifts toward longer wavelengths with increasing temperature, tensile strain, and transverse-loading. Moreover, the bending and transverse-loading properties of the FBGs are sensitive to the fiber orientations. The reasonable analyses for these sensing properties also are presented.