EXTENDED SSH MODEL FOR C58B2 AND C58N2

The extended Su-Schrieffer-Heeger model is used to study the electronic energy levels and molecular structures for two kinds of isomers of C₅₈X₂(X=B, or N). In each case we obtain two sets of stable solutions. For C₅₈X₂ (1, 2), both sets of solutions are found to be reasonable, indicating two different phases. For C₅₈X₂(1, 60 ), only one set of solutions which satisfy the central inversion symmetry is physically reasonable.     

Scanning tunneling microscopy of surface-adsorbed fullerenes: C60, C70, and C84

Scanning tunneling microscopy (STM) is used to characterize partial monolayers of C₆₀, C₇₀, and C₈₄ adsorbed on the Au(1 1 1) surface at room temperature and under ambient conditions. A high degree of structural polymorphism is observed for monolayers of each of these fullerenes. For C₆₀, three lattice packings are observed, including a previously unreported 7 × 7 R21.8° structure that is stabilized by adjacent surface step defects. For C₇₀, two lattice packings are observed, and analysis of molecular features in STM images allows molecular binding geometry to be determined. In one of the two observed lattice structures, C₇₀ molecules align their long axis along the surface normal, while in the other, molecules align parallel to the surface and along a gold lattice direction. The parallel geometry is also preferred for isolated and loosely packed molecules on the surface. C₈₄ exhibits a large number of lattice orientations and no long-range order, and likely binds incommensurately on Au(1 1 1). Time series of images of partial C₇₀ monolayers show progressive surface modification as a result of perturbation by the STM tip; this is in contrast to the behavior of C₆₀, where alterations in surface structure at room temperature are thermally driven.     

Infrared crystal spectra of C2H4, C2D4, and as-C2H2D2 and the general harmonic force field of ethylene

Carbon-13 frequency shifts for C₂H₄, C₂D₄, and as-C₂H₂D₂ have been measured in isotopic solid solutions in crystalline films at 60 K. All but two of the shifts (for as-C₂H₂D₂) are compatible with recently determined ζ data for C₂H₄, with ¹³C frequency shifts for C₂H₄ and C₂D₄ in the gas phase and with conventional frequency data. Together, these data completely determine with precision all 18 parameters of the GHFF for ethylene, the previous ambiguity in choice between two sets of A_g species force constants being removed. The force field reproduces closely the observed centrifugal distortion constants for C₂H₄, a ζ constant observed for trans-C₂H₂D₂, and the inertia defects for C₂H₄, C₂D₄, and as-C₂H₂D₂. Vibration and rotation constants for all isotopically deuterated ethylenes are calculated.Possible explanations for the two anomalous crystal shifts in as-C₂H₂D₂ involve the effects of the crystal field, and failure of the use of Dennison's rule for making anharmonic corrections to the shifts. The former explanation is preferred as a result of thorough analysis of the anharmonicity constants for as-C₂H₂D₂ determined from many overtone and combination bands in the gas and crystal spectra.     

C2H221分子转动角动量定向分布(Orientation)及其碰撞弛豫和转移

利用圆偏振激光受激Raman抽运,以 C₂H₂分子为样品选择性地制备了它的电子基态单一转动态(X¹Σ⁺_g,ν″₂＝1,J″的角动量定向布居(orientation)．并从圆偏振紫外激光诱导的A¹A_u(ν′₃＝1)←X¹Σ⁺_g(ν″₂＝1)的荧光（谱）,直接测定了 C₂H₂(X¹Σ^＋_g,ν″₂＝1,J″＝4,7,8,…,13）的角动量定向布居值．从时间分辨的荧光信号谱测定了角动量定向布居的碰撞弛豫速率常数,同时还研究了由各初始激励的转动态向其他邻近转动态碰撞诱导的角动量定向布居转移． 关键词：     

Interaction of O2, CO2, CO,C2H4 and C2H4O with Ag(110)

The interaction of O₂, CO₂, CO, C₂H₄ AND C₂H₄O with Ag(110) has been studied by low energy electron diffraction (LEED), temperature programmed desorption (TPD) and electron energy loss spectroscopy (EELS). For adsorbed oxygen the EELS and TPD signals are measured as a function of coverage (θ). Up to θ = 0.25 the EELS signal is proportional to coverage; above 0.25 evidence is found for dipole-dipole interaction as the EELS signal is no longer proportional to coverage. The TPD signal is not directly proportional to the oxygen coverage, which is explained by diffusion of part of the adsorbed oxygen into the bulk. Oxygen has been adsorbed both at pressures of less than 10^-4 Pa in an ultrahigh vacuum chamber and at pressures up to 10³ Pa in a preparation chamber. After desorption at 10³ Pa a new type of weakly bound subsurface oxygen is identified, which can be transferred to the surface by heating the crystal to 470 K. CO₂ is not adsorbed as such on clean silver at 300 K. However, it is adsorbed in the form of a carbonate ion if the surface is first exposed to oxygen. If the crystal is heated this complex decomposes into O_ad and CO₂ with an activation energy of 27 kcal/mol(1 kcal = 4.187 kJ). Up to an oxygen coverage of 0.25 one CO₂ molecule is adsorbed per two oxygen atoms on the surface. At higher oxygen coverages the amount of CO₂ adsorbed becomes smaller. CO readily reacts with O_ad at room temperature to form CO₂. This reaction has been used to measure the number of O atoms present on the surface at 300 K relative to the amount of CO₂ that is adsorbed at 300 K by the formation of a carbonate ion. Weakly bound subsurface oxygen does not react with CO at 300 K. Adsorption of C₂H₄O at 110 K is promoted by the presence of atomic oxygen. The activation energy for desorption of C₂H₄O from clean silver is ～ 9 kcal/mol, whereas on the oxygen-precovered surface two states are found with activation energies of 8.5 and 12.5 kcal/mol. The results are discussed in terms of the mechanism of ethylene epoxidation over unpromoted and unmoderated silver.     

The influence of structural defects on the adsorption of simple molecules (H2, C2H2, C2H4, C2H6, CO,NO) on rhenium single crystals

Using Thermal Programmed Desorption (TPD), Low Energy Electron Diffraction (LEED) and Auger Electron Spectroscopy (AES) we have studied the adsorption of hydrogen-containing molecules (H₂, C₂H₂, C₂H₄, C₂H₆) and oxygen-containing molecules (CO and NO) on two vicinal planes of the Re(0001) surface. The two surfaces are designated thus: ReS ¦14(0001)(101̄1)¦, ReS |6(0001)(167̄1) | . The structural defects have little effect on the adsorption of hydrogen and the hydrocarbons. They are more influential in the case of the oxygen-containing molecules. This is particularly true for CO; on the kink sites the CO molecules can completely dissociate whereas only a partial dissociation is possible on the steps. These results should be viewed in relation to the strong bond energy between carbon and oxygen in a CO molecule of 256 kcal/mole and the great affinity of oxygen for rhenium; E_Re?O = 127 kcal/mole.     

The structure and the analytical potential energy function of NH2 （X^2B1）

This paper reports that the equilibrium structure of NH2 has been optimized at the QCISD/6-311＋＋G （3df, 3pd） level. The ground-state NH2 has a bent （C2v, X^2B1） structure with an angle of 103.0582°. The geometrical structure is in good agreement with the other calculational and experimental results. The harmonic frequencies and the force constants have also been calculated. Based on the group theory and the principle of microscopic reversibility, the dissociation limits of NH2（C2v, X^2B1） have been derived. The potential energy surface of NH2（X^2B1） is reasonable. The contour lines are constructed, the structure and energy of NH2 reappear on the potential energy surface.     

F NMR and EPR study of fluorinated buckminsterfullerene C60F58

Solid state ¹⁹F NMR in the temperature range from 96 to 366 K and room temperature EPR studies of fluorinated buckminsterfullerene C₆₀F₅₈ have been carried out. The temperature dependence of the line width and the spin-lattice relaxation time show hindered molecular motion with the activation energy of ΔE_a=1.9 kcal/mol. Neither phase transition nor random rotation of C₆₀F₅₈ have been obtained. The spin-lattice relaxation rate is strongly affected by the presence of paramagnetic centers, namely, dangling C-C bonds yielding localized unpaired electrons. Such broken bonds are caused by C-C bond rupture in a cage-opened structure of hyperfluorinated species.     

Ultrafast motion of liquids C2H4Cl2 and C2H4Br2 studied with a femtosecond laser

Transient optical Kerr effect of liquids C₂H₄Cl₂ and C₂H₄Br₂ is investigated, for the first time to our knowledge, with a femtosecond (fs) probe laser delayed with respect to a coherent fs pump laser. Coherent coupling and electronic Kerr signals are observed around zero delay when pump and probe overlap. Persisting after the pump-probe overlap are Kerr signals arising from the torsional and other intramolecular vibrations of the trans and gauche conformations; Kerr signals arising from the intermolecular motion are also observed. Vibrational quantum interference is only observed in liquid C₂H₄Br₂ and the related beats data are fitted with the torsional vibrations, 91 cm⁻¹ (gauche) and 132 cm⁻¹ (trans), and the CCBr angle-bending vibrations, 231 cm⁻¹ (gauche) and 190 cm⁻¹ (trans), with dephasing times, 0.45 ps, 0.45 ps, 2 ps, and 1.5 ps, respectively. These vibrational frequencies agree with those obtained in the frequency-domain. That no vibrational mode is observed for C₂H₄Cl₂ might be attributed to ineffective Raman-pumping. Kerr signals observed after the pump-probe overlap are Fourier transformed to give the spectra of the intermolecular motion and the vibrational spectrum, which agrees with the one observed in the infrared absorption and/or Raman scattering heretofore.     

Geometric shielding corrections for total cross section calculations of electron scattering by CH4, C2H6, C2H3F3, C2H4, C2F4, C2Cl4 and C2Cl2F2 from 30–5000?eV

To quantify the changes in the geometric shielding effect in a molecule as the incident electron energy varies, an empirical fraction, which represents the total cross section contributions of shielded atoms in a molecule at different energies, is presented. Using this empirical fraction, the total cross sections for electron scattering by CH₄, C₂H₆, C₂H₃F₃, C₂H₄, C₂F₄, C₂Cl₄ and C₂Cl₂F₂ are calculated over a wide energy range from 30 to 5000 eV by the additivity rule model at the Hartree-Fock level. The quantitative total cross sections are compared with those obtained by experiment and other theories where available. Good agreement is attained above 100 eV.     

Adsorption-desorption studies using ESD of CCl2F2, C2H2F2 and C2F6 on tungsten

The behavior of the desorbing F⁺ ion current from electron bombarded CCl₂F₂, C₂H₂F₂ and C₂F₆ adsorbed on tungsten has been used to investigate the processes of adsorption and desorption of these gases. For tungsten near room temperature, measurements of the F⁺ ion current as a function of electron bombardment time indicated very similar or even identical F⁺-yielding adsorbed species resulting from adsorption of either CCl₂F₂ or C₂H₂F₂ and widely different species from C₂F₆. Cl⁺ ions were also observed to desorb from CCl₂F₂ ad-layers. The behavior of the Cl⁺ ion current with time during electron bombardment indicated electronic conversion between adsorbed binding modes. Complementary investigations on the interaction of CCl₂F₂, C₂H₂F₂ and C₂F₆ with tungsten were carried out by thermal desorption experiments in which the F⁺ ion signal was used to observe the coverage decrease of the F⁺-yielding species. The experiments were performed at tungsten temperatures in the 1200–1600 K range. It was concluded that the F⁺-yielding adsorbed species from CCl₂F₂ and C₂H₂F₂ were strongly bound to the tungsten surface. The F⁺-yielding species from C₂F₆ were found to be weakly bound. From a comparison of the ESD and thermal desorption results, the possibility of dissociative adsorption as well as the nature of the adsorbed species is discussed.     

The analytical potential energy function of flue gas SO2（X1A1）

The equilibrium structure of flue gas SO2 is optimized using the density functional theory （DFT）/B3P86 method and CC-PV5Z basis. The result shows that it has a bent （C2v, X1A1） ground state structure with an angle of 119.1184°. The vibronic frequencies and the force constants are also calculated. Based on the principles of atomic and molecular reaction statics （AMIIS）, the possible electronic states and reasonable dissociation limits for the ground state of SO2 molecule are determined. The potential functions of SO and 02 are fitted by the modified Murrell-Sorbie＋c6 （M-S＋c6） potential function and the fitted parameters, the force constants and the spectroscopic constants are obtained, which are all close to the experimental values. The analytic potential energy function of the SO2 （X1A1） molecule is derived using the many-body expansion theory. The contour liues are constructed, which show the static properties of SO2 （XIA1）, such as the equilibrium structure, the lowest energies, the most possible reaction channel, etc.     

Carbon K-shell excitation of C2H2, C2H4, C2H6 and C6H6 by 2.5 keV electron impact

Energy loss spectra of 2.5 keV electrons in the region of the carbon K-edge in C₂H₂, C₂H₄, C₂H₆ and C₆H₆ are report     

Auger spectra of CO,C2H4, C2N2 and C6H6 adsorbed on Pt(111)

Electron excited carbon KVV Auger spectra of CO, C₂H₄, C₂N₂ and C₆H₆ adsorbed on Pt(111) are compared. By estimating the effective Coulomb interaction between the final-state holes it is possible to associate some features with transitions observed in free molecule spectra, but others must involve at least one electron with energy within the conduction band of the metal. Such “cross-transitions” are associated with strong 2π* character of filled states in the presence of a core hole in molecules such as CO.     

Carbon nanotubes growth from C2H2 and C2H4/NH3 by catalytic LCVD on supported iron–carbon nanocomposites

We report about the synthesis of carbon nanotubes by catalytic LCVD (C-LCVD), using a CW CO₂ laser and alternatively, C₂H₂/C₂H₄/NH₃ and C₂H₂/C₂H₄-containing gas mixtures. Different core–shell Fe–C nanocomposites (as synthesized and toluene extracted) were used employed as catalysts. The nanotubes grown from Fe–C residue demonstrate the lowest mean diameters. Prevalent curled and coiled morphologies are obtained for the CNTs grown in the presence of ammonia.     

The bending energy levels of C2H2

Absorption spectra of C₂H₂ have been recorded between 50 and 1450 cm⁻¹, with a resolution always better than 0.005 cm⁻¹, using two different Fourier transform spectrometers. Analysis of the data provided two sets of results. First, the bending levels with Σ_t V_t(t = 4, 5) ≤ 2 were characterized by a coherent set of 34 parameters derived from the simultaneous analysis of 15 bands, performed using a matrix Hamiltonian. The following main parameters were obtained (in cm⁻¹): ω₄⁰ = 608.985196(14), ω₅⁰ = 729.157564(10); B₀ = 1.17664632(18), α₄ = −1.353535(86) × 10⁻³, α₅ = −2.232075(40) × 10⁻³; q₄⁰ = 5.24858(12) × 10⁻³, and q₅⁰ = 4.66044(12) × 10⁻³, with the errors (1σ) on the last quoted digit. Second, a more complete set of bending levels with Σ_t V_t ≤ 4, some of which have never previously been reported, and also including V₂ = 1 have been fitted to 80 parameters. This simultaneous fit involved 43 bands and used the same full Hamiltonian matrix. Some perturbations which affect the higher excited levels are discussed.     

Microkinetic modelling of the formation of C1 and C2 products in the Fischer-Tropsch synthesis over cobalt catalysts

The heats of adsorption of different C₁ and C₂ molecules assumed to be present during the initial steps of the Fischer-Tropsch synthesis and activation energies for elementary steps envisioned to occur in the synthesis are calculated for Co by using the unity bond index-quadratic exponential potential (UBI-QEP) method. The preexponential factors for the elementary steps are calculated from transition-state theory, and the rate constants are calculated according to the Arrhenius equation. The activation barrier for hydrogenation of CO is found to be lower compared to hydrogen assisted dissociation of CO, which has a smaller activation barrier than direct dissociation of CO. The reaction steps with high activation barriers are eliminated. Based on this elimination two sets of elementary steps for formation of C₁ and C₂ alkenes and alkanes in the Fischer-Tropsch synthesis are established: one based on hydrogen assisted CO dissociation (carbide mechanism) and one based on CO hydrogenation (CO insertion mechanism). In addition, one mechanism of producing CO₂ from the water-gas shift reaction is proposed. The resulting mechanisms are combined and used in the microkinetic model, which are fitted to experimental results at methanation conditions (T = 483 K or 493 K, p = 1.85 bar and H₂/CO = 10) over a Co/Al₂O₃ Fischer-Tropsch catalyst. A good tuning is obtained by adjusting the C-Co and H-Co binding strengths. The microkinetic modelling based on these assumptions indicates that CO is mainly converted through hydrogenation of CO and that C₂ compounds are mainly produced by insertion of CO into a metal-methyl bond. Thus, from the surface coverages and reaction rates predicted by the microkinetic modelling the mechanism can be further reduced to only include the CO insertion mechanism. Hydrogenation of CHO to CH₂O is found to be the rate determining initiation step, and insertion of CO into a metal-methyl bond is found to be the rate determining step for chain growth. By using the UBI-QEP method for calculation of activation energies, the activation barriers for dissociation of CO and hydrogenation of surface carbon are found to be too large for the carbide mechanisms to occur. However, experimental data or another theoretical method is necessary in order to support or disprove the calculated activation energies in this work.     

AP/(N2 + C2H2 + C2H4) gaseous fuel diffusion flame studies

Counterflow diffusion flame experiments and modeling results are presented for a fuel mixture consisting of N₂, C₂H₂, and C₂H₄ flowing against decomposition products from a solid AP pellet. The flame zone simulates the diffusion flame structure that is expected to exist between reaction products from AP crystals and a hydrocarbon binder. Quantitative species and temperature profiles have been measured for one strain rate, given by a separation of 5 mm, between the fuel exit and the AP surface. Species measured include C₂H₂, C₂H₄, N₂, CN, NH, OH, CH, C₂, NO, NO₂, O₂, CO₂, H₂, CO, HCl, H₂O, and soot volume fraction. Temperature was measured using a combination of a thermocouple at the fuel exit and other selected locations, spontaneous Raman scattering measurements throughout the flame, NO vibrational populations, and OH rotational population distributions. The burning rate of the AP was also measured for this flame’s strain rate. The measured eighteen scalars are compared with predictions from a detailed gas-phase kinetics model consisting of 105 species and 660 reactions. Model predictions are found to be in good agreement with experiment and illustrate the type of kinetic features that may be expected to occur in propellants when AP particles burn with the decomposition products of a polymeric binder.     

Infrared spectra of two isomers of OCS–C2H2 and OCS–C2D2 in the region of OCS ν1 fundamental

Infrared spectra of OCS–C₂H₂ and OCS–C₂D₂ complexes in the region of the C–O stretching fundamental of OCS (2060 cm⁻¹) are studied in a pulsed supersonic slit-jet expansion using a tunable diode laser. For each complex, two bands are observed and assigned to distinct near-parallel and the T-shaped isomers. Ground state parameters were previously determined from microwave studies, so analysis of the infrared spectra gives information on the vibrational shifts upon complex formation as well as rotational and centrifugal distortion parameters for the excited states. All four bands show a red shift with respect to the monomer band origin, with the T-shaped isomer having a much larger shift than the near-parallel isomer. Disappearance of the T-shaped isomer when argon is used as a carrier gas supports the notion that the near-parallel isomer is the lowest energy form of the complex.     

An inelastic neutron scattering study of C2H2 adsorbed on type 13X zeolites

The inelastic neutron scattering spectra of C₂H₂ and C₂D₂ adsorbed on a Ag⁺ exchanged 13X zeolite (0–800 cm^?1) and of C₂H₂ on the Na⁺ form (0–300 cm^?1) have been obtained. For the Na-13X system no distinct vibrational modes were observed, however for the Ag-13X systems the low frequency intramolecular modes of the adsorbed gas and some of the vibrations of the adsorbed gas relative to the surface have been assigned. From the deuteration shifts it appears that C₂H₂ and C₂D₂, adsorbed on Ag-13X, are non-linear.