Carbon K-shell excitation of C2H2, C2H4, C2H6 and C6H6 by 2.5 keV electron impact

Energy loss spectra of 2.5 keV electrons in the region of the carbon K-edge in C₂H₂, C₂H₄, C₂H₆ and C₆H₆ are report     

LEED and thermal desorption studies of small molecules (H2, O2, CO,CO2, NO,C2H4, C2H2 and C) chemisorbed on the stepped rhodium (755) and (331) surfaces

The chemisorption of H₂, O₂, CO, CO₂, NO, C₂H₂, C₂H₄ and C has been studied on the clean stepped Rh(755) and (331) surfaces. Low energy electron diffraction (LEED), Auger electron spectroscopy (AES) and thermal desorption spectroscopy (TDS) were used to determine the size and orientation of the unit cells, desorption temperatures and decomposition characteristics for each adsorbate. All of the molecules studied readily chemisorbed on both stepped surfaces and several ordered surface structures were observed. The LEED patterns seen on the (755) surface were due to the formation of surface structures on the (111) terraces, while on the (331) surface the step periodicity played an important role in the determination of the unit cells of the observed structures. When heated in O₂ or C₂H₄ the (331) surface was more stable than the (755) surface which readily formed (111) and (100) facets. In the CO and CO₂ TDS spectra a peak due to dissociated CO was observed on both surfaces. NO adsorption was dissociative at low exposures and associative at high exposures. C₂H₄ and C₂H₂ had similar adsorption and desorption properties and it is likely that the same adsorbed species was formed by both molecules.     

The influence of structural defects on the adsorption of simple molecules (H2, C2H2, C2H4, C2H6, CO,NO) on rhenium single crystals

Using Thermal Programmed Desorption (TPD), Low Energy Electron Diffraction (LEED) and Auger Electron Spectroscopy (AES) we have studied the adsorption of hydrogen-containing molecules (H₂, C₂H₂, C₂H₄, C₂H₆) and oxygen-containing molecules (CO and NO) on two vicinal planes of the Re(0001) surface. The two surfaces are designated thus: ReS ¦14(0001)(101̄1)¦, ReS |6(0001)(167̄1) | . The structural defects have little effect on the adsorption of hydrogen and the hydrocarbons. They are more influential in the case of the oxygen-containing molecules. This is particularly true for CO; on the kink sites the CO molecules can completely dissociate whereas only a partial dissociation is possible on the steps. These results should be viewed in relation to the strong bond energy between carbon and oxygen in a CO molecule of 256 kcal/mole and the great affinity of oxygen for rhenium; E_Re?O = 127 kcal/mole.     

Pressure broadening and collisional shift of the Rb D2 absorption line by CH4, C2H6, C3H8, n-C4H10, and He

The pressure broadening and shift rates of the rubidium D2 absorption line 5²S_1/2→5²P_3/2 (780.24 nm) with CH₄, C₂H₆, C₃H₈, n-C₄H₁₀, and He were measured for pressures ≤80 Torr using high-resolution laser spectroscopy. The broadening rates γ_B for CH₄, C₂H₆, C₃H₈, n-C₄H₁₀, and He are 28.0, 28.1, 30.5, 31.3, and 20.3 (MHz/Torr), respectively. The corresponding shift rates γ_S are −8.4, −8.8, −9.7, −10.0, and 0.39 (MHz/Torr), respectively. The measured rates of Rb for the hydrocarbon buffer gas series of this study are also compared to the theoretically calculated rates of a purely attractive van der Waals difference potential. Good agreement is found to exist between measured and theoretical rates.     

Thermal stability of cubane C8H8

The reasons for the anomalously high thermal stability of cubane C₈H₈ and the mechanisms of its decomposition are studied by numerically simulating the dynamics of this metastable cluster at T = 1050–2000 K using a tight-binding potential. The decomposition activation energy is found from the temperature dependence of the cubane lifetime obtained from the numerical experiment; this energy is fairly high, E _a = 1.9 ± 0.1 eV. The decomposition products are, as a rule, either C₆H₆ and C₂H₂ molecules or the isomer C₈H₈ with a lower energy. Original Russian Text ? M.M. Maslov, D.A. Lobanov, A.I. Podlivaev, L.A. Openov, 2009, published in Fizika Tverdogo Tela, 2009, Vol. 51, No. 3, pp. 609–612.     

Leed and thermal desorption studies of small molecules (H2, O2, CO,CO2, NO,C2H4, C2H2 AND C) chemisorbed on the rhodium (111) and (100) surfaces

The chemisorption of H₂, O₂, CO, CO₂, NO, C₂H₄, C₂H₂ and C has been studied on the clean Rh(111) and (100) surfaces. LEED, AES and thermal desorption were used to determine the surface structures, disordering and desorption temperatures, displacement and decomposition characteristics for each species. All of the molecules studied readily chemisorbed on both surfaces. A large variety of ordered structures was observed, especially on the (111) surface. The disordering temperatures of most ordered surface structures on the (111) surface were below 100°C. It was necessary to adsorb the gases at 25° C or below in order to obtain well-ordered surface structures. Chemisorbed oxygen was readily removed from the surface by H₂ or CO gas at crystal temperatures above 50°C. CO₂ appears to dissociate to CO upon adsorption on both rhodium surfaces as indicated by the identical ordering and desorption characteristics of these two molecules. C₂H₄ and C₂H₂ also had very similar ordering and desorption characteristics and it is likely that the adsorbed species formed by both molecules is the same. Decomposition of ethylene produced a sequence of ordered carbon surface structures on the (111) face as a result of a bulk-surface carbon equilibrium. The chemisorption properties of rhodium appear to be generally similar to those of iridium, nickel and palladium.     

Geometric shielding corrections for total cross section calculations of electron scattering by CH4, C2H6, C2H3F3, C2H4, C2F4, C2Cl4 and C2Cl2F2 from 30–5000?eV

To quantify the changes in the geometric shielding effect in a molecule as the incident electron energy varies, an empirical fraction, which represents the total cross section contributions of shielded atoms in a molecule at different energies, is presented. Using this empirical fraction, the total cross sections for electron scattering by CH₄, C₂H₆, C₂H₃F₃, C₂H₄, C₂F₄, C₂Cl₄ and C₂Cl₂F₂ are calculated over a wide energy range from 30 to 5000 eV by the additivity rule model at the Hartree-Fock level. The quantitative total cross sections are compared with those obtained by experiment and other theories where available. Good agreement is attained above 100 eV.     

Experimental and kinetic modeling study of C2H4 oxidation at high pressure

A detailed chemical kinetic model for oxidation of C₂H₄ in the intermediate temperature range and high pressure has been developed and validated experimentally. New ab initio calculations and RRKM analysis of the important C₂H₃ + O₂ reaction was used to obtain rate coefficients over a wide range of conditions (0.003-100 bar, 200-3000 K). The results indicate that at 60 bar and medium temperatures vinyl peroxide, rather than CH₂O and HCO, is the dominant product. The experiments, involving C₂H₄/O₂ mixtures diluted in N₂, were carried out in a high pressure flow reactor at 600-900 K and 60 bar, varying the reaction stoichiometry from very lean to fuel-rich conditions. Model predictions are generally satisfactory. The governing reaction mechanisms are outlined based on calculations with the kinetic model. Under the investigated conditions the oxidation pathways for C₂H₄ are more complex than those prevailing at higher temperatures and lower pressures. The major differences are the importance of the hydroxyethyl (CH₂CH₂OH) and 2-hydroperoxyethyl (CH₂CH₂OOH) radicals, formed from addition of OH and HO₂ to C₂H₄, and vinyl peroxide, formed from C₂H₃ + O₂. Hydroxyethyl is oxidized through the peroxide HOCH₂CH₂OO (lean conditions) or through ethenol (low O₂ concentration), while 2-hydroperoxyethyl is converted through oxirane.     

Infrared crystal spectra of C2H4, C2D4, and as-C2H2D2 and the general harmonic force field of ethylene

Carbon-13 frequency shifts for C₂H₄, C₂D₄, and as-C₂H₂D₂ have been measured in isotopic solid solutions in crystalline films at 60 K. All but two of the shifts (for as-C₂H₂D₂) are compatible with recently determined ζ data for C₂H₄, with ¹³C frequency shifts for C₂H₄ and C₂D₄ in the gas phase and with conventional frequency data. Together, these data completely determine with precision all 18 parameters of the GHFF for ethylene, the previous ambiguity in choice between two sets of A_g species force constants being removed. The force field reproduces closely the observed centrifugal distortion constants for C₂H₄, a ζ constant observed for trans-C₂H₂D₂, and the inertia defects for C₂H₄, C₂D₄, and as-C₂H₂D₂. Vibration and rotation constants for all isotopically deuterated ethylenes are calculated.Possible explanations for the two anomalous crystal shifts in as-C₂H₂D₂ involve the effects of the crystal field, and failure of the use of Dennison's rule for making anharmonic corrections to the shifts. The former explanation is preferred as a result of thorough analysis of the anharmonicity constants for as-C₂H₂D₂ determined from many overtone and combination bands in the gas and crystal spectra.     

New FIR laser lines from optically pumped C2H3F, C2H3Cl, C2H3Br, C2H3CN, C2H5F, CH2CF2, HCOOH and CH3Br

Twenty-seven new cw far infrared laser lines with wavelengths between 137 and 988m have been observed from optically pumping C₂H₃F, C₂H₃Cl, C₂H₃Br, C₂H₅F, C₂H₃CN, CH₂CF₂, HCOOH and CH₃Br with a CO₂ laser. The wavelengths of these FIR laser lines were determined together with their optimum pressures and relative intensities.     

Auger spectra of CO,C2H4, C2N2 and C6H6 adsorbed on Pt(111)

Electron excited carbon KVV Auger spectra of CO, C₂H₄, C₂N₂ and C₆H₆ adsorbed on Pt(111) are compared. By estimating the effective Coulomb interaction between the final-state holes it is possible to associate some features with transitions observed in free molecule spectra, but others must involve at least one electron with energy within the conduction band of the metal. Such “cross-transitions” are associated with strong 2π* character of filled states in the presence of a core hole in molecules such as CO.     

Experimental and Theoretical Study of Hydrogen Atom Abstraction from C2H6 and C4H10 by Zirconium Oxide Clusters Anions

使用配有团簇产生和化学反应源的飞行时间质谱装置,研究了锆氧阴离子团簇Zr_xOy^-与乙烷和丁烷的反应. 在反应中发现了Zr₂O₅H^-和Zr₃O₇H^-产物. 用密度泛函理论研究了乙烷在Zr₂O₅^-上的反应通道,发现乙烷脱氢反应可以发生,从而证明观察到的产物是源于脱氢反应. 该工作揭示了锆氧负离子团簇与烷烃反应中的新通道.     

The role of co-adsorbed O2 on the catalytic reduction of NO with C2H5OH on the surface of Pt(3 3 2)

The influence of pre-dosed O₂ on the catalytic reduction of NO with ¹³C₂H₅OH on the surface of stepped Pt(3 3 2) was investigated using Fourier transform infra red reflection-absorption spectroscopy (FTIR-RAS) and thermal desorption spectroscopy (TDS). We show that the oxidation of ¹³C₂H₅OH with O₂ is a very effective reaction, occurring at 150 K and giving rise to acetate. The presence of NO does not lead to any evident oxidation of ¹³C₂H₅OH irrespective of the annealing temperature. For the case of O₂ + ¹³C₂H₅OH + NO co-adlayers, oxidation of ¹³C₂H₅OH also takes place at 150 K. However, no new surface species that are supposed to be an intermediate for the production of N₂ are detected.The influence of O₂ on the production and desorption of N₂ is intimately related to both O₂ and ¹³C₂H₅OH coverage. The presence of pre-dosed O₂ does not greatly promote N₂ desorption. In fact, N₂ desorption is suppressed quantitatively with increasing O₂ coverage, after which unreacted, or left-over O atoms appear and remain on steps. It is concluded that the presence of pre-dosed O₂ does not play a role of activating reactants in the catalytic reduction of NO with ¹³C₂H₅OH on the surface of Pt(3 3 2).     

The chemisorption of CO,CO2, C2H2, C2H4, H2 and NH3 on the clean Fe(100) and (111) crystal surfaces

The chemisorption of small molecules (CO, CO₂, C₂H₂, C₂H₄, H₂ and NH₃) has been studied on the clean Fe(110) and (111) crystal faces by low-energy electron diffraction (LEED) and thermal desorption. C₂H₄ and C₂H₂ yield the same sequence of surface structures that change with temperature and crystal orientation. CO and CO₂ chemisorption similarly results in the formation of the same types of surface structures that change with surface temperature and crystal orientation. Ammonia forms several ordered surface structures on both iron crystal faces. All of the molecules decompose as a function of temperature on the iron surfaces as indicated by the Auger and thermal desorption spectra.     

On the formation and decomposition of C7H8

The kinetics of reactions on the C₇H₈ surface were studied with state-of-the-art ab initio transition state theory (TST) and master equation methodologies. A priori predictions of the capture rate for C₆H₅ + CH₃ and for C₇H₇ + H are obtained from direct variable reaction coordinate TST simulations. These simulations employ small basis set CASPT2 interaction energies coupled with one-dimensional reaction path corrections based on higher level simulations for related reactions. For the C₇H₇ + H reaction, predictions are obtained for both the total rate and for the branching between toluene, o-isotoluene and p-isotoluene. A mapping of the low energy pathways for isomerization from these three C₇H₈ isomers identifies a number of processes with barriers at or below the dissociation threshold. Nevertheless, at combustion temperatures the dissociation rates are predicted to exceed the isomerization rates, and it is reasonable to treat the kinetics of each isomer as a simple single well association/dissociation equilibrium. Master equation simulations yield predictions for the temperature and pressure dependence of each of the recombination and dissociation processes, as well as for the C₇H₇ + H → C₆H₅ + CH₃ bimolecular reaction. These simulations implement collisional energy transfer probabilities based on the work of Luther and co-workers. The theoretical predictions are found to be in satisfactory agreement with the available experimental data for the photodissociation of toluene, the temperature and pressure dependent dissociation of toluene, and the reaction of benzyl radical with H. For the C₆H₅ + CH₃ recombination, the theoretical predictions exceed the experimental measurements of Lin and coworkers by a factor of 2 or more for all temperatures.     

Experimental and kinetic investigations of the effect of H2/CH4/C2H4 addition on the burning properties of practical jet fuel

Laminar flame speeds of premixed jet fuel/air with the addition of hydrogen, methane and ethylene are measured in a constant-volume bomb at an initial temperature of 420 K, initial pressure of 3 atm, equivalence ratios of 0.6–1.5 and gas mass fractions of 0–50%. The experimental results show that the addition of hydrogen and ethylene can significantly improve the laminar flame speed of the liquid jet fuel, while the addition of methane shows a weak inhibitory effect, and these effects are relatively remarkable on the fuel-rich conditions. The laminar flame speed of the dual fuels/air is linearly dependent on the additional gas mass fraction. A kinetic analysis indicates that the gas addition causes both thermodynamic and chemical kinetic effects on the laminar flame speed of the dual fuels/air. The adiabatic temperature increases and decreases with the addition of hydrogen/ethylene and methane, respectively. A sensitivity analysis shows that the reactions concerning to the H, CH₃ and C₂H₃ radicals become significant with the addition of hydrogen, methane and ethylene, respectively, and that the different values of the rate of product (ROP) of these species via the critical reactions lead to a different promotional or inhibitory effect on the fuel-rich and fuel-lean conditions.     

Saturated absorption of C2H4 with a CO2 waveguide laser

Saturated spectroscopy of C₂H₄ was performed with a CO₂ waveguide laser. Seventeen lines were measured with a precision of the order of 200 kHz. On the basis of these data and of a new highly accurate determination of the ground-state rotational constants a better analysis of the ν₄, ν₇, and ν₁₀ levels was achieved.     

Interaction of O2, CO2, CO,C2H4 and C2H4O with Ag(110)

The interaction of O₂, CO₂, CO, C₂H₄ AND C₂H₄O with Ag(110) has been studied by low energy electron diffraction (LEED), temperature programmed desorption (TPD) and electron energy loss spectroscopy (EELS). For adsorbed oxygen the EELS and TPD signals are measured as a function of coverage (θ). Up to θ = 0.25 the EELS signal is proportional to coverage; above 0.25 evidence is found for dipole-dipole interaction as the EELS signal is no longer proportional to coverage. The TPD signal is not directly proportional to the oxygen coverage, which is explained by diffusion of part of the adsorbed oxygen into the bulk. Oxygen has been adsorbed both at pressures of less than 10^-4 Pa in an ultrahigh vacuum chamber and at pressures up to 10³ Pa in a preparation chamber. After desorption at 10³ Pa a new type of weakly bound subsurface oxygen is identified, which can be transferred to the surface by heating the crystal to 470 K. CO₂ is not adsorbed as such on clean silver at 300 K. However, it is adsorbed in the form of a carbonate ion if the surface is first exposed to oxygen. If the crystal is heated this complex decomposes into O_ad and CO₂ with an activation energy of 27 kcal/mol(1 kcal = 4.187 kJ). Up to an oxygen coverage of 0.25 one CO₂ molecule is adsorbed per two oxygen atoms on the surface. At higher oxygen coverages the amount of CO₂ adsorbed becomes smaller. CO readily reacts with O_ad at room temperature to form CO₂. This reaction has been used to measure the number of O atoms present on the surface at 300 K relative to the amount of CO₂ that is adsorbed at 300 K by the formation of a carbonate ion. Weakly bound subsurface oxygen does not react with CO at 300 K. Adsorption of C₂H₄O at 110 K is promoted by the presence of atomic oxygen. The activation energy for desorption of C₂H₄O from clean silver is ～ 9 kcal/mol, whereas on the oxygen-precovered surface two states are found with activation energies of 8.5 and 12.5 kcal/mol. The results are discussed in terms of the mechanism of ethylene epoxidation over unpromoted and unmoderated silver.     

Carbon nanotubes growth from C2H2 and C2H4/NH3 by catalytic LCVD on supported iron–carbon nanocomposites

We report about the synthesis of carbon nanotubes by catalytic LCVD (C-LCVD), using a CW CO₂ laser and alternatively, C₂H₂/C₂H₄/NH₃ and C₂H₂/C₂H₄-containing gas mixtures. Different core–shell Fe–C nanocomposites (as synthesized and toluene extracted) were used employed as catalysts. The nanotubes grown from Fe–C residue demonstrate the lowest mean diameters. Prevalent curled and coiled morphologies are obtained for the CNTs grown in the presence of ammonia.     

Absorption spectra of C6H6 and C6D6 near 340 nm

The absorption spectra of C₆H₆ and C₆D₆ in the liquid phase have been studied near 340 nm. The absorption spectrophotometric mounting was a sequential double-beam attachment with linear response to energy on scanning of the spectrum before the exit slit and an electronic device which gives directly either the absorbance or the integrated absorbance of a transition and, consequently, its oscillator strength.The oscillator strength measured for the band of C₆H₆ is 8×10^?8, which corresponds to a dipole moment of 2.4×10^?3 Debye; this value is of the same order as a theoretical value calculated by Tsubomura and Mulliken (3.8×10^?3 Debye) for a transition between states ³F and ³A of an oxygen-benzene pair. This agreement corroborates the hypothetical existence of such a transition.The first vibrational band is at 28553 cm^?1 for C₆H₆; this band is not observed in the vapor or solid phase. It corresponds probably to the transition 0-0, which is considered in the literature to be near 29500 cm^?1. The isotopic shift measured for this first band is 164 cm^?1. The vibrational frequencies are, respectively, 910 cm^?1 for C₆H₆ and 889 cm^?1 for C₆D₆.