Femtosecond fiber laser at 780 nm for two-photon autofluorescence imaging

We present an Er-doped fiber(Er:fiber)-based femtosecond laser at 780 nm with 256 MHz repetition rate, 191 fs pulse duration, and over 1 W average power. Apart from the careful third-order dispersion management, we introduce moderate self-phase modulation to broaden the output spectrum of the Er:fiber amplifier and achieve 193 fs pulse duration and 2.43 W average power. Over 40% frequency doubling efficiency is obtained by a periodically poled lithium niobate crystal. Delivering through a hollow-core photonic bandgap fiber, this robust laser becomes an ideal and convenient light source for two-photon autofluorescence imaging.     

Generation of 47 fs Pulses from an Er:Fiber Amplifier

We demonstrate a self-starting erbium fiber oscillator-amplifier system based on the nonlinear polarization rotation mode-locked mechanism. The direct output pulse from the amplifier is 47 fs with an average power of 1.22 W and a repetition rate of 50 MHz, corresponding to a pulse energy of 24 nJ. The full width at half-maximum of the spectrum of the output pulses is approximately 93 nm at a central wavelength of 1572 nm so that the transformlimited pulse duration is as short as 39 fs. Due to the imperfect dispersion compensation, we compress the pulses to 47 fs in this experiment.     

光子晶体光纤飞秒激光非线性放大系统的耦合动力学过程研究

构建了掺镱大模场面积单偏振光子晶体光纤飞秒激光非线性放大系统. 讨论了腔内净色散量和抽运功率对振荡级输出参数的影响和振荡级参数对放大级输出参数的影响. 在本实验条件下, 当腔内净色散量取较大负色散时, 振荡级直接输出的脉冲更宽, 且携带更少的啁啾. 当振荡级抽运4.53 W时, 选择最接近变换极限的脉冲作为种子脉冲, 放大级在60 W抽运时输出压缩后无基底的短脉冲, 宽度为45.7 fs, 平均功率28 W. 振荡级抽运功率增加到5.08 W, 放大级抽运70 W时, 获得最高输出功率34.5 W, 对应脉宽53.5 fs.     

High-power diode-pumped Yb3+:CaF2 femtosecond laser

We report what is believed to be the first demonstration of a high-power passively mode-locked diode-pumped femtosecond laser based on an Yb3+:CaF2 single crystal, directly pumped by a 15-W fiber-coupled laser diode. With a 5-at. % Yb3+ -doped sample and prisms for dispersion compensation we obtained pulses as short as 150 fs, with 880 mW of average power and up to 1.4-W average output power, with a pulse duration of 220 fs, centered at 1049 nm. The laser wavelength could be tuned from 1040 to 1053 nm in the femtosecond regime. Using chirped mirrors for dispersion compensation, the oscillator provided up to 1.74 W of average power, with a pulse duration of 230 fs, corresponding to a pulse energy of 20 nJ and a peak power of 85 kW.     

Mode-locked 0.5 μJ fiber laser at 976 nm

We report on high-energy femtosecond pulse generation from an ytterbium-doped rod-type fiber oscillator emitting around 976 nm. Self-starting and stable single-pulse operation are demonstrated with 4.2 W of average output power at a repetition rate of 8.4 MHz. The resulting energy level reaches 0.5 μJ. Because of the all-normal dispersion of the laser cavity, output pulses are naturally chirped with a duration of 14 ps. External compression using diffraction gratings shortens the pulse duration down to 460 fs.     

Tunable femtosecond near-infrared source based on a Yb:LYSO-laser-pumped optical parametric oscillator

We demonstrate a widely tunable near-infrared source from 767 nm to 874 nm generated by the intracavity second harmonic generation(SHG) in an optical parametric oscillator pumped by a Yb:LYSO solid-state laser. The home-made Yb:LYSO oscillator centered at 1035 nm delivers an average power of 2 W and a pulse duration as short as 351 fs. Two Mg O doped periodically poled lithium niobates(Mg O:PPLN) with grating periods of 28.5–31.5 μm in steps of 0.5 μm and19.5–21.3 μm in steps of 0.2 μm are used for the OPO and intracavity SHG, respectively. The maximum average output power of 180 m W at 798 nm was obtained and the output pulses have pulse duration of 313 fs at 792 nm if a sech2-pulse shape was assumed. In addition, tunable signal femtosecond pulses from 1428 nm to 1763 nm are also realized with the maximum average power of 355 m W at 1628 nm.     

High power all-fibered femtosecond master oscillator power amplifier at 1.56 μm

Direct amplification of output from chirped pulse oscillator (CPO) to 3.3?W of average power (pulse energy of 118?nJ in 20?ps pulse duration before compression) was achieved in a properly designed cladding pumped large mode area Er-doped fiber. Various configurations of CPO cavity with different FWHM of output spectrum and pulse duration were investigated. Fourier limit compression with 480?fs pulse duration and 32?kW peak power has been obtained for pulses with 14.8?nm FWHM spectrum. Subsequent nonlinear compression in a standard SMF-28 fiber yielded pulses as short as 145?fs.     

Frequency doubled femtosecond Ti:sapphire laser with an assisted enhancement cavity

We report an enhancement cavity for femtosecond Ti:sapphire laser at the repetition rate of 170 MHz. An enhancement factor of 24 is obtained when the injecting pulses have an average power of 1 W and a pulse duration of 80 fs. By placing a BBO crystal at the focus of the cavity, we obtain a 392-m W intracavity doubled-frequency laser, corresponding to a conversion efficiency of 43%. The output power has a long-term stability with a root mean square(RMS) of 0.036%.     

High-power Kerr-lens mode-locked Yb:YAG thin-disk oscillator in the positive dispersion regime

We demonstrate a self-starting Kerr-lens mode-locked (KLM) Yb:YAG thin-disk oscillator operating in the regime of positive intracavity group-delay dispersion (GDD). It delivers 1.7?ps pulses at an average power of 17?W and a repetition rate of 40?MHz. Dispersive mirrors compress the pulses to a duration of 190?fs (assuming sech² shape; Fourier limit: 150?fs) at an average power level of 11?W. To our knowledge, this is the first KLM thin-disk oscillator with positive GDD. Output powers of up to 30?W were achieved with an increased output coupler transmission and intracavity GDD. We demonstrate increase of the pulse energy with increasing positive intracavity GDD, limited by difficulties in initiating mode-locking.     

High power Yb-fiber laser amplifier based on nonlinear chirped-pulse amplification at a repetition rate of 1 MHz

We report a high power fiber amplifier based on nonlinear chirped-pulse amplification(NCPA). To manage the nonlinearity,pulse shaping is introduced by self-phase modulation in the fiber stretcher with the help of spectral filtering. The third-order dispersion is compensated for by the nonlinear phase shift in the NCPA. With optimization, the system can output 382 fs pulse duration with 20 W average power at 1 MHz repetition rate. The long-term average power fluctuation is measured to be0.5% in 24 h, and the beam quality factor(M~2) is 1.25.     

High-energy femtosecond photonic crystal fiber laser

We report the generation of high-energy high-peak power pulses in an all-normal dispersion fiber laser featuring large-mode-area photonic crystal fibers. The self-starting chirped-pulse fiber oscillator delivers 11 W of average power at 15.5 MHz repetition rate, resulting in 710 nJ of pulse energy. The output pulses are dechirped outside the cavity from 7 ps to nearly transform-limited duration of 300 fs, leading to pulse peak powers as high as 1.9 MW. Numerical simulations reveal that pulse shaping is dominated by the amplitude modulation and spectral filtering provided by a resonant semiconductor saturable absorber.     

100-TW sub-20-fs Ti:sapphire laser system operating at a 10-Hz repetition rate

We developed a compact three-stage Ti:sapphire amplifier laser system that produced peak power in excess of 100 TW for a pulse duration of less than 19 fs and an average power of 19 W at a 10-Hz repetition rate. A final 40-mm-diameter Ti:sapphire amplifier is pumped by a Nd:YAG master-oscillator-power-amplifier system that produces ~7-J output of 532-nm radiation. The spatial beam quality is approximately 2 times diffraction limited for the full amplified compressed output pulse. With f/3 optics, this system should therefore be capable of producing a focused intensity of ~3x10(20) W/cm(2) .     

High-power diode-pumped mode-locked Yb:YAG ceramic laser

A high-power diode-pumped passively mode-locked Yb:YAG ceramic laser was demonstrated. An average output power of 3.80W with a pulse duration of 433 fs at a repetition rate of 90.9MHz was obtained at a wavelength of 1050 nm using a 2% output coupler. A peak power of 96.5kW was also obtained. To the best of our knowledge, these are the highest reported average power and peak power for a diode-pumped mode-locked Yb:YAG ceramic laser.     

Tunable femtosecond laser in the visible range with an intracavity frequency-doubled optical parametric oscillator

We demonstrated experimentally a synchronously pumped intracavity frequency-doubled femtosecond optical parametric oscillator (OPO) using a periodically-poled lithium niobate (PPLN) as the nonlinear material in combination with a lithium triborate (LBO) as the doubling crystal. A Kerr-lens-mode-locked (KLM) Ti:sapphire oscillator at the wavelength of 790 nm was used as the pump source, which was capable of generating pulses with a duration as short as 117 fs. A tunable femtosecond laser covering the 624-672 nm range was realized by conveniently adjusting the OPO cavity length. A maximum average output power of 260 mW in the visible range was obtained at the pump power of 2.2 W, with a typical pulse duration of 205 fs assuming a sech2 pulse profile.     

Apatite-structure crystal, Yb(3+):SrY(4)(SiO(4))(3)O, for the development of diode-pumped femtosecond lasers

We report what is believed to be the first diode-pumped Yb(3+): SrY(4)(SiO(4)) (3)O laser. We investigate both the cw and the mode-locked regimes. In the cw regime an average output power of 1.05 W is demonstrated for 3.6 W of incident pump power. In the femtosecond regime a pulse duration of 94 fs for an average power of 110 mW is obtained at a central wavelength of 1068 nm. This is, to our knowledge, the first femtosecond mode-locked oscillator made with an Yb-doped apatitelike crystal. These properties are related to the unique spectroscopic properties of Yb(3+) ions in this atypical apatite-family crystal.     

Passively mode locked femtosecond Tm:Sc2O3 laser at 2.1 μm

We report on the passive mode locking of a Tm3+:Sc2O3 laser at 2.1 μm using a semiconductor saturable absorber mirror based on InGaAsSb quantum wells. Transform-limited 218 fs pulses are generated with an average power of 210 mW. A maximum output power of 325 mW is produced during mode locking with the corresponding pulse duration of 246 fs at a pulse repetition frequency of 124.3 MHz. A Ti:sapphire laser is used as the pump source operating at 796 nm.     

High-power all-normal-dispersion femtosecond pulse generation from a Yb-doped large-mode-area microstructure fiber laser

We report on an all-normal-dispersion mode-locked fiber laser based on a large-mode-area Yb-doped microstructure fiber and using a high nonlinear modulation depth semiconductor saturable absorber mirror. The laser delivers 3.3 W of average output power with positively chirped 5.5 ps pulses at a center wavelength of 1033 nm. The pulse repetition rate is 46.4 MHz, which results in an energy per pulse of 71 nJ. These pulses are extracavity dechirped down to 516 fs by using bulk gratings. The average power of the dechirped pulses is 2.3 W, which corresponds to a peak power of more than 96 kW.     

300W线偏振飞秒全光纤啁啾脉冲放大系统北大核心CSCD

报道了高平均功率的线偏振啁啾脉冲放大系统。该系统包括全光纤结构的多级放大器以及透射光栅脉冲压缩器。压缩前,实现了近衍射极限光束输出,平均功率425 W,光光效率81%,消光比约13dB;压缩后,获得了平均功率300 W、脉宽315fs、峰值功率12 MW的激光脉冲,为目前报道的最高平均功率的线偏振光纤啁啾脉冲放大系统。     

Resonant-optical-cavity photoconductive switch with 0.5% conversion efficiency and 1.0 W peak power

We report a new photoconductive switch having an average output power of 44 microW, an instantaneous bandwidth of approximately 300 GHz, an output pulse width of approximately 2.2 ps, a peak output power of approximately 1.0 W, and an optical-to-electrical conversion efficiency of approximately 0.5% when pumped by a palm-sized mode-locked free-space laser at lambda=780.6 nm with an average power of 8.7 mW and an optical pulse width of approximately -230 fs. The switch is made from an ErAs:GaAs epitaxial layer inside a resonant optical cavity and coupled to a planar three-turn square spiral antenna.     

Pulse energy scaling to 5 microJ from a femtosecond thin disk laser

We report an increase in pulse energy to 5.1 microJ obtained directly from a femtosecond diode-pumped Yb:YAG thin disk laser without external amplification. Stable passive mode locking was obtained with a semiconductor saturable absorber mirror (SESAM). The laser delivers 63 W of average output power in a nearly diffraction-limited beam (M2=1.1) at a center wavelength of 1030 nm. The pulse repetition rate is 12.3 MHz, and the pulses have a duration of 800 fs, which results in a peak power of 5.6 MW. The laser was operated in a box flooded with helium because the nonlinearity of air was found to be a limiting factor for the stability of the pulse formation at increasing pulse energies.