Quasi-simultaneous ultraviolet and infrared emission from a plasma cathode TEA laser

Quasi-simultaneous laser action in the UV (0.337 μm) and the IR (10.6 μm) was observed from a pulsed laser with a sliding discharge plasma cathode. The laser operates at atmospheric pressure, with a gas mixture of CO₂/N₂/He, at a 0.26/0.50/4.0 lmin⁻¹ flow rate. Output energies of 30 mJ in the IR and 0.35 mJ in the UV were obtained, from a laser discharge volume of 38.0×1.0×2.8 cm³. The optimum gas mixtures have been determined and the temporal behavior of the discharge parameters, the performance characteristics of the laser and the beam spatial distributions were investigated.     

Performance studies of a pulsed HF laser with a sliding discharge plasma cathode

The plasma electrode design concept is applied for the first time to an HF laser. The discharge along the surface of a dielectric (sliding discharge) is used as a plasma cathode for the main laser discharge. The laser operates at atmospheric pressure with a gas mixture of He/SF₆/C₃H₈. Details are presented on the efficiency of energy transfer, the dependence of laser performance on circuit parameters, gas mixture, relative energy loading and time delay between the plasma electrode and main discharges. The F atom production rate is estimated from the linear dependence of the output energy on the electric charge passed through the discharge. Output energies of 600 mJ were obtained at 1.6% efficiency from a small active discharge of 108 cm₃ volume and 38 cm length, while the maximum specific input and output energies were 370 J/1 and 5.7 J/1, respectively. These values compare favourably with those reported in the literature for non-chain-reaction-type gas mixtures at 1 atm pressure and demonstrate that the plasma electrode design is a powerful scheme for developing gas-discharge lasers.     

Laser plasmatron for diamond coating deposition

An experimental installation with a laser plasmatron based on a continuous wave CO₂ laser with a radiation power of up to 3.5 kW has been created. The plasmatron design makes it possible to bring out the plasma jet into atmospheric air both along and across the laser beam direction. The spatial temperature distributions on the metal substrate surface heated by the plasma jet are measured. The threshold power for optical discharge maintenance as a function of the gas flow rate and the focal length of the focusing lens are obtained for an Ar and Ar/CH₄/H₂ gas mixture under atmospheric pressure; the radiation spectrum of the discharge plasma is measured. A one-dimensional model of the discharge for estimation of its geometrical parameters in a convergent laser beam with consideration of radiation refraction on the discharge is given.     

Effect of helium/argon gas ratio in a He-Ar-Cu<Superscript>+</Superscript> IR hollow-cathode discharge laser: modeling study and comparison with experiments

The He-Ar-Cu⁺ IR laser operates in a hollow-cathode discharge, typically in a mixture of helium with a few-% Ar. The population inversion of the Cu⁺ ion levels, responsible for laser action, is attributed to asymmetric charge transfer between He⁺ ions and sputtered Cu atoms. The Ar gas is added to promote sputtering of the Cu cathode. In this paper, a hybrid modeling network consisting of several different models for the various plasma species present in a He-Ar-Cu hollow-cathode discharge is applied to investigate the effect of Ar concentration in the gas mixture on the discharge behavior, and to find the optimum He/Ar gas ratio for laser operation. It is found that the densities of electrons, Ar⁺ ions, Ar_m ^* metastable atoms, sputtered Cu atoms and Cu⁺ ions increase upon the addition of more Ar gas, whereas the densities of He⁺ ions, He₂ ⁺ ions and He_m ^* metastable atoms drop considerably. The product of the calculated Cu atom and He⁺ ion densities, which determines the production rate of the upper laser levels, and hence probably also the laser output power, is found to reach a maximum around 1–5 % Ar addition. This calculation result is compared to experimental measurements, and reasonable agreement has been reached. Received: 14 October 2002 / Revised version: 28 November 2002 / Published online: 19 March 2003 RID="*" ID="*"Corresponding author. Fax: +32-3/820-23-76, E-mail: annemie.bogaerts@ua.ac.be     

Optimization of the UV CuII laser

The cw output power of the uv CuII laser has been optimized with respect to the hollow cathode geometry, the discharge current, the fill gas pressure and the resonator mirror parameters. A maximum laser output power of 900 mW for multiline operation at 248.6, 259.1, 260.0, and 270.3 nm was achieved with 100 A discharge current, 260 V voltage and 16 mbar fillgas pressure, when a hollow cathode of 1.2 m length and 2×6 mm² cross section was employed. The single-pass pain gl has been estimated to 7%. A hollow cathode cross section of 1.5×4.5 mm² is suggested as an optimum geometry. In addition, some investigations on the mechanism of the laser power decay in Ne–Cu-discharges are presented.     

Space resolved density measurements of argon and helium metastable atoms in radio-frequency generated He-Ar micro-plasmas

Space resolved concentrations of helium He* (³S₁) and argon Ar* (³P₂) metastable atoms in an atmospheric pressure radio frequency micro-plasma jet were measured using tunable diode laser absorption spectroscopy. Even small absorptions down to 10^-4 could be measured using lock-in technique. The absolute density of metastable atoms densities at different rf-power, flow rate and gas mixture was deduced from measured absorption rates. Metastable concentrations range from 10⁹ to 10¹¹ cm^-3. Analysis of spectral profiles provided the pressure broadening coefficients of both metastable atoms by helium. The spatial distribution of metastable atoms in the plasma volume was obtained for various discharge conditions. Density profiles between the electrodes reveal the sheath structure and reflect the plasma excitation distributions in the discharge volume. It reveals the dominance of the α-mode discharge.     

Scaling and performance of CO2 lasers at supra-atmospheric pressure

The performance of a compact uv photo-preionized TE laser is studied in the pressure range 1–5 bar. As the pressure is increased, the laser pulse shape is little altered, but both the peak power and the total output pulse energy increase significantly with pressure, even for constant input electrical energy. For various gas mixtures and excitation source capacitors the measurements suggest approximate output energy scaling with the product of the source charge per unit electrode area [C.m^–2] and the molecular partial pressure [CO₂+N₂+CO]. This is explained in terms of the pressure-dependent discharge impedance. An input-energy-related discharge instability limits the optimum laser pressure to 1.5–2.5 bar, and we show that, at constant input energy, the instability boundary depends on the molecular partial pressure alone. The pre-ionization photo-electron yield varies negligibly with pressure, but the discharge tolerance to added oxygen decreases asp ^–3 top ^–4, dependent on gas mixture. Nevertheless sealed operation for >10⁵ shots has been obtained with a 5% CO₂5% CO3% N₂2% H₂85% He gas mixture at a total pressure of 5 bar.     

Influence of inert and molecular gas impurities on the lasing efficiency of a neon-hydrogen plasma laser operating at λ=585.3 nm He

A study has been made of the effect that inert and molecular gas impurities (He, Ar, Kr, Xe, N₂, CO₂) have on the lasing efficiency of a Penning plasma laser operating at =585.3 nm Hel in an Ne-H₂ mixture excited in a longitudinal discharge. The optimal compositions found for ternary mixtures can substantially increase the laser output parameters. The lasing power gain obtained in an Ne-H₂-Ar mixture is more than an order of magnitude higher than that in an Ne-H₂ mixture.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 4, pp. 54–59, April, 1996.     

Effect of atmospheric pressure pulsed discharge spatial inhomogeneity on Ar I and H I lines: Electron number density study

The spatial inhomogeneity of pulsed atmospheric pressure discharge in argon is investigated using the electron number density N_e diagnostics procedure applied to asymmetrically broadened Ar I lines. A dedicated fitting procedure is used for describing Ar I 703.0 nm line shape recorded from argon gas discharge and H I (at 486.13 and 656.28 nm) lines recorded from Ar-H₂ gas mixture discharge. The results revealed the change in N_e in both axial and radial directions. The additional Ar I lines at 614.5, 710.7, 731.2, and 731.6 nm, recorded from integral spatial radiation, are analysed as well to confirm the results from the plasma column region. The possibility of using AlO (B²∑⁺–X²∑⁺) and CN (B²∑⁺–X²∑⁺) molecular bands for gas temperature T_g measurements in this type of gas discharge source is demonstrated and T_g used as an input parameter for the N_e diagnostics procedure. For the proper identification of molecular band spectral lines, the Fortrat parabolas are constructed. The results obtained from Ar I 703.0 nm line indicate three different N_e values, with N_e1 ≈ 0.6 × 10¹⁶ cm⁻³, N_e2 ≈ 3.6 × 10¹⁶ cm⁻³, and N_e3 ≈ 19 × 10¹⁶ cm⁻³ measured from the plasma column. These N_e values increase in the cathode and anode region.     

New cw far-infrared D2O, 12CH3F and 14NH3 laser lines

The operation of a continuous CO₂ waveguide laser at nearly atmospheric pressure is reported. A plasma injection technique is used to produce a uniform discharge at atmospheric pressure. Continuous output power of 0.6 W was obtained at the inlet pressure of 800 torr. Corresponding outlet pressure was 340 torr. While the maximum output power was 1.4 W at the inlet pressure of 600 torr. The gas mix ratio was CO₂ : N₂ : He = 1 : 1 : 6.     

X-ray preionized CO2 laser

A short pulse (100 ns) high-energy x-ray source has been used to preionize a transversely excited carbon dioxide gas discharge laser of 600 cm³ active volume. The maximum output power of 60 MW in a 50 ns FWHM pulse was achieved from a CO₂–N₂–He–CO–Xe static gas mixture at 600 Torr pressure. The energy conversion efficiency was 6%.     

A cw uv copper hollow cathode laser in the 260 nm region

A cw uv copper hollow cathode laser is described, which could be operated for a longer time duration with an output power of 7 mW in the 260 nm region. A double-cathode configuration with a protection for the mirrors from metal-vapour deposition is presented. Characteristics of the laser output power, the spontaneous emission, and the ion densities in the negative glow were measured as depending on the discharge current, the neon gas pressure, and the size of the cathode slit. The observed saturation of the laser output power at high discharge current (1 A/cm²) and the optimum slot size are discussed.     

Novel long-pulse TE CO2 laser excited by pulser–sustainer discharge

A novel long-pulse TE CO₂ laser with UV-preionization is presented. With an active volume of 1.17 l and gas pressure of 30 kPa, the laser can discharge stably with low pulser energy and high sustainer energy. Various long-pulse discharges such as 12, 20 or 25 μs are demonstrated. At discharge pulse width of 23.9 μs, maximum output laser energy of 6.8 J is obtained at an efficiency of 9.0%.     

Linewidth studies on the Ar+ 476.5 nm and 480.6 nm lines excited in a helium-agron hollow cathode discharge

The spectral line shapes of the Ar⁺ 476.5 nm and 480.6 nm lines, excited in a He-Ar hollow cathode (HC) discharge, were measured using the Fabry-Perot technique. The collisional and Doppler linewidths were determined for the two lines. The collisional broadening constants are estimated to be (5±3) MHz/mbar and (6±3) MHz/mbar, respectively. The temperature obtained from the two Ar ion transitions was found to be 260 K higher than that expected for the rest of the gas mixture from earlier measurements. The possibility is discussed, that this excess temperature is caused by Ar ions partially created in the HC discharge by charge transfer collisions with He ₂ ⁺ molecules.     

Numerical study of the effect of gas flow in low pressure inductively coupled Ar/N<Subscript>2</Subscript> plasmas

The effect of gas flow in low pressure inductively coupled Ar/N₂ plasmas operating at the rf frequency of 13.56 MHz and the total gas pressure of 20 mTorr is studied at the gas flows of 5–700 sccm by coupling the plasma simulation with the calculation of flow dynamics. The gas temperature is 300 K and input power is 300 W. The Ar fractions are varied from 0% to 95%. The species taken into account include electrons, Ar atoms and their excited levels, N₂ molecules and their seven different excited levels, N atoms, and Ar⁺, N⁺, N₂ ⁺, N₄ ⁺ ions. 51 chemical reactions are considered. It is found that the electron densities increase and electron temperatures decrease with a rise in gas flow rate for the different Ar fractions. The densities of all the plasma species for the different Ar fractions and gas flow rates are obtained. The collisional power losses in plasma discharges are presented and the effect of gas flow is investigated.     

A computer model of a transverse discharge cw CO laser

A kinetic model has been developed for the investigation of the novel performance of a CO laser, on which efficient extraction of laser power was obtained by exciting a subsonic gas mixture of CO/N₂/He/O₂ through transverse dc discharge. Kinetic equations for direct excitation by electron impact, V-V and V-R/T energy transfer, and stimulated emission are coupled with a semi-one-dimensional flow model. Careful consideration is devoted especially to the V-V transfer process of CO–N₂ and N₂–N₂. The laser power was calculated by a constant gain method. The laser output performance, examined as a function of gas mixture ratio, temperature, flow velocity, and discharge current, was in good agreement with the experiment.     

Optical characterization of atmospheric‐pressure plasma needle

The atmospheric‐pressure plasma needle is a promising source that can be used efficiently for different industrial applications. A radio frequency (RF) (13.56 MHz) generator was used to generate a He–O₂/Ar mixture plasma. The ground‐state oxygen atomic density [O] was calculated as a function of discharge parameters by “actinometry”. The Ar‐I (2p₁ → 1s₂) line at 750 nm and the O‐I (³P → ³S) line at 844 nm were used to estimate the [O] atomic density. The rotational temperature T _R of He–O₂/Ar mixture was measured from the rotational levels of the “first negative system” (FNS) by using the “Boltzmann plot”. The effect of discharge parameters on the atomic oxygen density [O] and the gas temperature was monitored. These results show that [O] density increases with RF power and O₂ concentration, but decreases with the gas flow rate. Whereas the gas temperature increases with increase in the input RF power, it decreases with increase in the gas flow rate and O₂ concentration in the mixture. Since the [O] atomic density contributes to plasma‐based biomedical applications, the proposed optimum conditions for plasma‐based decontamination of heat‐sensitive materials in the present study are 0.6% oxygen, 500 sccm flow rate, and 26 W RF power.     

Contribution to the theory of non-self-maintaining volume discharges in molecular and noble gases

Results are presented of investigations of non-self-maintaining volume (NV) gas discharges. The structure is investigated and the current-voltage characteristics are plotted of NV discharges in molecular gas. The characteristic times of the transient processes in the cathode layer of a nonstationary electron-beam-controlled (EBC) discharge are obtained. It is proposed to use an NV discharge as the nonlinear element of a relaxation-oscillation laser. Results are presented of computer experiments with such a laser. The influence of the hydrodynamic motion of the mixture on the characteristics of the cathode layer of an open-cycle cw EBC laser is investigated. It is shown that the ultraviolet emission of excimer molecules alters radically the structure of the cathode layer of an EBC discharge in a noble gas, viz., the intense photoeffect on the cathode leads to the appearance of a negative cathode potential drop. Self-maintaining photoionization and EBC discharges in a noble gas are considered; in these discharges the plasma density is maintained by impurity ionization or by electron-excitation of the atoms by emission from excimer molecules.Translated from Trudy Ordena Lenina Fizicheskogo Instituta im. P. N. Lebedeva, Vol. 142, pp. 46–94, 1983.     

Excimer ArF laser with an output energy of 1.3 J at 2.0% efficiency on the He:Ar:F2 mixture

In this paper it is shown that to achieve a maximum efficiency and high output energy of an ArF (193 nm) excimer laser, one should use optimal pump intensity. It has been shown experimentally that the optimal pump intensity for an ArF excimer laser with the mixture of He:Ar:F₂ has a value of 4.5–5.0 MW/cm³. The results of an experimental study of the pump and active medium parameters effect on the efficiency and output energy of the ArF excimer laser on the mixture of He:Ar:F₂ are presented. To provide high pump intensity of an active medium, the excitation scheme of the LC-inverter type has been used where the current return conductor inductance had been increased from 30 to 80 nH. This allows the pump to achieve levels of intensity above 5.0 MW/cm³. By using the pump intensity of 5.0 MW/cm³ in an active medium of He:Ar:F₂–79.7:20:0.3 at total pressure of 2.4 atm, we are the first to obtain the output energy of 1.3 J at the total efficiency of 2.0%. The pulse duration (FWHM) was 15±1 ns and the peak pulse power was 85 MW. PACS 42.55.Lt; 42.60.Lh     

Output characteristics of a cataphoresis He–Sr recombination laser

A cataphoresis discharge tube of 7 mm inner diameter and 38 cm active length was designed and made for the He–Sr⁺ laser. The cataphoretic input of uniform distribution of strontium vapor concentrations along the active region was realized by the cataphoresis effect and the slow flowing (0.5 nl/h) of helium buffer gas. The strontium ionic recombination laser at 430.5 nm and the R–M transition laser at 1.03 μm were obtained with the modified Blumlein circuit by high-frequency longitudinal pulsed discharge. The laser components are concentrated on the 430.5 nm wavelength. Dependences of working parameters such as the pulse frequency, the supply voltage, and the helium pressure on laser output characteristics were measured and discussed. The maximum laser output power of 819 mW and specific power of 56 mW/cm³ were obtained, respectively.