基于双色条纹投影的快速傅里叶变换轮廓术

在实际傅里叶变换轮廓术测量中，获取的条纹图扩展的零频分量对傅里叶变换轮廓术的测量精度和测量范围有很大影响，甚至妨碍正确三维面形的恢复。π相移技术常被用来消除零频分量对测量的影响，但需要在测量系统中安装精密相移装置，并需要采集两帧具有π相位差的条纹图。传统傅里叶变换轮廓术中，完成精密相移需要较长的时间，影响了傅里叶变换轮廓术测量方法的实时性。提出了采用双色正弦光栅投影来实现从一帧条纹图中消除零频对傅里叶变换轮廓术测量的影响。该方法同传统的π相移方法相比，不需要相移装置，测量系统简单，并且能真正实现高速测量。     

利用强度调制消除零频的傅里叶变换轮廓测量

采用双色正弦条纹投影的傅里叶变换轮廓术中零频分量的扩展对有用基频分量有影响,为此提出一种新型的基于强度调制的零频消除方法提高测量准确度和范围.通过采集一帧变形彩色条纹图并分离颜色通道获得两幅相位差为π的条纹图,对变形条纹做强度调制校正,进而消除零频分量,实现高度解析.理论模拟和实验测试均验证了此方法的有效性.相比传统的相移消除零频分量的方法,此方法具有显著的速度优势,适合于三维物体的实时测量.     

利用强度调制消除零频的傅里叶变换轮廓测量

采用双色正弦条纹投影的傅里叶变换轮廓术中零频分量的扩展对有用基频分量有影响,为此提出一种新型的基于强度调制的零频消除方法提高测量准确度和范围.通过采集一帧变形彩色条纹图并分离颜色通道获得两幅相位差为π的条纹图,对变形条纹做强度调制校正,进而消除零频分量,实现高度解析.理论模拟和实验测试均验证了此方法的有效性.相比传统的...     

基于背景光调制的复合光傅里叶变换轮廓术

提出一种基于背景光调制的用于傅里叶变换轮廓术测量范围的复合光栅,该光栅通过调制一正弦条纹和不含任何相位信息的背景光来抑制零频,较基于相移技术的复合光栅有更大的优势:背景光只含直流分量,使得复合光栅的频谱更加简单,有利于滤出载波信息,提高测量精度;对从复合光栅中解调出来的背景光只涉及平均值校准,校准过程更为简单;解调出的背景光与物体表面的反射率成正比,具有潜在的应用价值。采用Matlab程序对该复合光栅进行了数值模拟,并对该光栅实用性进行了实验研究,结果证实了该光栅用于抑制零频、扩大傅里叶变换轮廓术测量范围的有效性,且提高了测量精度。     

傅里叶变换轮廓术中基于经验模态分解抑制零频的方法

为了消除傅里叶变换轮廓术中零频成分的扩展对测量范围和精度的影响,将经验模态分解方法引入到傅里叶变换轮廓术中,对变形条纹图进行经验模态分解,将条纹图分解为一系列的从高频到低频排列的固有模态函数,达到将高频成分和低频成分相分离的目的,用以消除零频成分,提高测量范围.同采用相移消除零频成分的技术相比,此方法只需要一帧条纹图,测量装置简单、实时性强、计算速度快.文中给出了理论分析和实验验证.     

基于条纹对比度和背景光校准的正交复合光三维测量方法

提出了一种对条纹对比度和背景光进行校准的正交复合光三维测量方法。从参考平面的复合光栅像中解调获得各帧相移正弦条纹,通过频域滤波的方法获取条纹的零频和基频分量,计算出各帧相移正弦条纹相对第一帧正弦条纹的对比度和背景光比例系数,并以此系数对实物测量时解调出来的各帧变形条纹对比度和背景光进行校准,建立了新的三维测量数学模型。实验证明该方法能降低传统正交复合光三维测量方法中的解相误差,提高系统的测量精度。     

基于快速傅里叶变换的实时相移校正算法

在相移测量剖面术（ＰＭＰ）中,提出了一种基于快速傅里叶变换的相移校正算法,利用最初多采的一幅条纹图的信息和傅里叶变换调制度模板,快速地计算出当前的相移值。采用该算法,能实时准确地控制投影光栅的移动,大大提高了测量系统的工和自动化程度,具有极大的实用价值。     

一种新型单帧彩色复合光栅投影的实时三维测量方法

提出了一种新型单帧彩色复合光栅投影的实时三维测量方法。采用三帧具有π2的相移正弦条纹分别编码到红色(R)、绿色(G)和蓝色(B)三个颜色通道中,组合成单帧彩色复合光栅,当该彩色复合光栅投影到待测物体上,仅需获取单帧彩色变形条纹并从中分离出相应的具有π2相移的三帧单色相移变形条纹,由于不同颜色通道之间存在颜色串扰以及色度不均衡问题,采用最小二乘法对分离出的三帧单色相移变形条纹直流项进行背景一致性校正,从而获得三帧校正后的单色相移变形条纹,运用所建立的三维重构物理模型,即可恢复物体的三维形貌。实验验证了该方法的可行性和实用性。进一步的实验表明,该方法的测量精度优于传统单帧彩色PMP。因为所提方法仅需一帧彩色复合光栅即可恢复物体的三维形貌,在实时三维测量中具有很好的应用前景。     

基于图像二维小波多尺度分解傅里叶变换轮廓术

应用傅里叶变换轮廓术测量物体三维面形时,当被测物体形状复杂或是被噪声严重污染时,导致频谱分布展宽,发生频谱混叠现象,基频提取困难,无法准确恢复物体的三维面型.提出了基于小波分解的傅里叶变换轮廓术,采用小波变换的方法对变形条纹图进行二维多尺度分解,重构被测物的背景图像,滤出图像的零频成分,得到相对变形条纹.运用小波变换与傅里叶变换轮廓术相结合的方法,只需拍摄一幅变形条纹图,将被测物体与背景分离,不受背景成分的影响,且易于基频信息的提取,降低了对滤波器的要求.实验证明该方法较好地防止了频谱的混叠问题,提高了测量范围与解相精度.     

基于傅里叶变换的高精度条纹细分方法

针对传统傅里叶变换法在提取条纹图相位中存在的能量泄漏问题,提出了条纹图整周期裁剪的方法,可有效抑制能量泄漏对检相精度的影响,提高傅里叶变换法相位计算的精度。在此基础上,提出了一种基于傅里叶变换时移特性的叠栅条纹细分新方法。与传统傅里叶变换法相比,该方法求取相邻两帧条纹图间的相移,只需经过两次傅里叶变换,不需要截取条纹图的基频再逆变换回空域,因此计算量至少减少了一倍,计算速度大大提高。数值计算结果表明,对两束单色平面波形成的条纹,理想条件下细分精度高达10-12量级;对高斯包络调制的条纹,细分精度至少可达10-3量级。     

Fourier transform profilometry based on composite structured light pattern

In Fourier transform profilometry (FTP), the zero frequency of the imaged patterns will influence the measurement range and precision. The π phase shifting technique is usually used to eliminate the zero order component, but this method requires the capture of two fringe patterns with a π phase difference between them, which will impede the real time application of the method. In this paper, a novel method is proposed, in which a composite structured light pattern is projected onto the object. The composite structured light pattern is formed by modulating two separate fringe patterns with a π phase difference along the orthogonal direction of the two distinct carrier frequencies. This method can eliminate the zero frequency by using only one fringe pattern. Experiments show that there is no decrease in the precision of this novel method compared with the traditional π phase shifting technique.     

用双图全息相移干涉法计算与时间有关的位相分布

提出一种双图全息相移干涉法．该方法可以用来计算与时间有关的位相分布，两幅全息干涉条纹图可以同时得到，并且有固定的９０°位相差．虽然两幅条纹图的位相可以随着时间变化，如环境影响，或载荷变化，但他们之间的位相差恒定．该方法利用二维傅氏变换，结合偏振相移法以及分光技术．     

Method for eliminating zero spectrum in Fourier transform profilometry

Windowed Fourier transform (FT) is introduced into Fourier transform profilometry (FTP) to extract zero component included in deformed fringe pattern without capturing two fringe patterns with π phase difference. First, we extract zero component of deformed fringe image using windowed FT and normalize it, then calculate the normalized Fourier spectra of deformed fringe image, finally subtract the zero component from Fourier spectra of deformed fringe image. We give the theoretical analysis of the proposed method. The experiment is carried out to demonstrate that the method can eliminate zero component and extend the measurable slope of height variation to nearly three times of the conventional FTP.     

A novel 3D measuring method for discontinuous object by non-integral twin-frequency grating

A new 3D shape measurement method based on non-integral twin-frequency grating projection is proposed. In this paper, the projected composite grating is composed of two sinusoidal gratings, and the quotient of whose frequencies is not an integer. By using appropriate phase-shifting algorithms, two wrapped phases can be obtained from sixteen frames of the distorted grating patterns. In aid of appropriate phase unwrapping method, the unwrapped phase of high frequency fringe is obtained only from the relation of the two wrapped phases by a pixel-to-pixel phase unwrapping technique. Therefore the unwrapped phase of high frequency fringe pattern is independent of the low frequency fringe pattern, different from traditional integral twin-frequency grating projection methods in which the phase unwrapping error of low frequency fringe pattern may be propagated onto the unwrapped phase of high frequency fringe pattern. The new theory proves that the proposed method is applicable to measure discontinuous object, and has considerable measurement accuracy.     

基于梯形与正弦相移算法的非线性误差校正北大核心CSCD

相移轮廓术是一种广泛使用的光学三维测量方法,其精度不仅受相位展开算法本身的影响,也受测量系统中投影仪和摄像机的非线性影响。理论上,投射更多的相移条纹可减弱非线性误差的影响,但是增加了测量时间。为了提高误差校正的效率,提出了一种基于梯形正弦相移的测量方法。该方法需要两组改进的梯形相移条纹和一幅正弦条纹。梯形条纹提供图像强度信息和条纹级次信息,图像强度信息用来求取系统的非线性响应曲线,进一步消除系统的非线性。正弦条纹经过希尔伯特变换可求得额外的条纹图像,用来计算截断相位信息。经过校正的截断相位信息,可进一步获取精度较高的三维信息。相较于先前的梯形与正弦误差校正方法,该方法的测量效率提高了28%。     

The use of carrier frequency shifting for the elimination of phase discontinuities in Fourier transform profilometry

This paper presents a novel application of frequency shifting in the Fourier transform fringe analysis technique applied to surface shape measurement. In recent years little use has been made of frequency shifting, although it was a feature of the method as originally proposed. The paper shows that if the angle between fringe projection and viewing is small, it is possible to employ a frequency shift to effectively eliminate the occurrence of any wraps in the resulting phase distribution. This is obviously of value in cases where the object to be measured contains several discontinuities which would lead to a highly complex, maybe unprocessable, wrapped phase distribution. The technique is presented and analysed, and its effects on measurement resolution discussed. It is illustrated with a measurement made on a populated surface mount technology printed circuit board.     

散斑干涉相位条纹图的频域滤波处理

为了解决在数字散斑干涉技术测量时,散斑干涉相位条纹图像中大量噪声对相位解包裹结果和精度产生严重影响的问题,介绍了一种条纹正余弦分解和频域低通滤波结合的方法,实现了散斑干涉相位条纹图的高精度滤波。该方法的基本思路是在对相位图像进行滤波处理前,先将相位图通过正余弦函数进行映射转换成两幅图,分别经过频域滤波,然后再合成为相位图。这种分解频域滤波方法可以在滤波的同时,有效保留相位跳变信息。实验结果表明：与传统的图像降噪方法相比,该方法能够在保留图像“尖峰”信息的基础上,较好地滤除图像中的散斑噪声,方法简单有效,有效解决了传统滤波方法应用在相位条纹图中,相图灰度信息丢失10%~40%的问题。     

A new method for generating and analysing digital speckle shearing correlation fringe patterns

A method for generating a high visibility digital speckle shearing fringe pattern is proposed. A three-step phase shifting technique which involves the introduction of arbitrary phases is utilized. The phase shifting technique is carried out using a rotating mirror and a theoretical model which involves a linear correlation algorithm is discussed. Experimental results showing correlation fringe patterns and a deformation phase map are presented.