首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 437 毫秒
1.
Radiation characteristics are calculated for a circular planar sound source in free space with a uniform surface pressure distribution, which can be regarded as a freely suspended membrane with zero mass and stiffness. This idealized dipole source is shown to have closed form solutions for its far-field pressure response and radiation admittance. The latter is found to have a simple mathematical relationship with the radiation impedance of a rigid piston in an infinite baffle. Also, a single expansion is derived for the near-field pressure field, which degenerates to a closed form solution on the axis of symmetry. From the normal gradient of the surface pressure, the surface velocity is calculated. The near-field expression is then generalized to an arbitrary surface pressure distribution. It is shown how this can be used as a simplified solution for a rigid disk in free space or a more realistic sound source such as pre-tensioned membrane in free space with non-zero mass and a clamped rim.  相似文献   

2.
Distributions of sound pressure and intensity on the surface of a flat impedance strip flush-mounted on a rigid baffle are studied for a grazing incident plane wave. The distributions are obtained by superimposing the unperturbed wave (the specularly reflected wave as if the strip is rigid plus the incident wave) with the radiated wave from the surface vibration of the strip excited by the unperturbed pressure. The radiated pressure interferes with the unperturbed pressure and distorts the propagating plane wave. When the plane wave propagates in the baffle-strip-baffle direction, it encounters discontinuities in acoustical impedance at the baffle-strip and strip-baffle interfaces. The radiated pressure is highest around the baffle-strip interface, but decreases toward the strip-baffle interface where the plane wave distortion reduces accordingly. As the unperturbed and radiated waves have different magnitudes and superimpose out of phase, the surface pressure and intensity increase across the strip in the plane wave propagation direction. Therefore, the surface absorption of the strip is nonzero and nonuniform. This paper provides an understanding of the surface pressure and intensity behaviors of a finite impedance strip for a grazing incident plane wave, and of how the distributed intensity determines the sound absorption coefficient of the strip.  相似文献   

3.
The on-axis far-field pressure response of a circular membrane in an infinite baffle when driven by a uniformly distributed electrostatic force is calculated using two different trial functions for the surface velocity distribution. The first is an expansion based upon a solution to the free space wave equation in oblate spheroidal coordinates, which has already been derived in a previous paper [J. Acoust. Soc. Am. 120(5), 2460-2477 (2006)], and the second is a membrane eigenfunction expansion (or Bessel series), which is rigorously derived in this letter. Although the latter can be used as a basis for calculating a number of different radiation characteristics such as the radiation impedance or directivity, etc., only the on-axis far-field sound pressure is considered here. The results are compared and discussed.  相似文献   

4.
An expression for the radiation impedance of a rigid annular ring vibrating with uniform amplitude in a close-fitting infinite plane rigid baffle is presented. An algorithm for the numerical evaluation of this expression by electronic computer is included in the form of an Algol 60 procedure. A selection of numerical results obtained is included.  相似文献   

5.
Diffraction corrections to scalar wave fields at perfectly free and rigid rough surfaces were derived by two iterations of the corresponding integral equations. These diffraction corrections to the pressure or normal velocity (which, in the geometrical optics limit, are doubled at perfectly rigid and free surfaces, respectively) were obtained with an accuracy of approximately 1k(2), where k is the wave number of incidence radiation. Based on these corrections to the surface fields, the backscattering cross sections at normal incidence from the statistically rough Gaussian surfaces were derived. It was found that for the gentle roughness, diffraction results in effective "smoothing" of roughness for rigid and free surfaces and increasing of the backscattering cross sections, but for a rigid surface with steep roughness, the "fictitious" surface can be more rough than the real one, and the diffraction corrections become negative.  相似文献   

6.
In this paper an alternative approach to estimate the sound field of an elliptically shaped transducer in an infinite baffle is described. The method is based on a singular value decomposition of a propagating matrix which is computed through a division of the vibrating surface into a finite number of small circular piston sources flush-mounted on the elliptical surface. This decomposition is combined with the volume velocity vector on the discretized surface to obtain the sound pressure field. Numerical examples for both on-axis sound pressure and directivity are presented for the uniform elliptical piston transducer and they are in good agreement with the results given by other methods.  相似文献   

7.
The accurate prediction of sound radiation from plate-like structures remains a challenging problem. Although the case of a plate set in a rigid baffle can be solved analytically, when the plate radiates sound into free space the problem is more difficult to solve; nevertheless, several approaches have been proposed to determine the sound radiation from an unbaffled plate. The present study extends the consideration to the situation of an unbaffled plate which is located close to a rigid reflecting surface. For this purpose, Laulagnet's model for the radiation efficiency of an unbaffled plate is extended by modifying the Green's function to include an image source due to the reflecting surface. The results show that, depending on the distance between the plate and the rigid surface, the radiation efficiency is considerably reduced at low frequencies. Additional reduction of sound radiation can be achieved by introducing perforation to the plate. However, at higher frequencies, the radiation efficiency is amplified relative to that for the plate in the absence of the rigid surface, both with and without perforation. These results have also been validated experimentally.  相似文献   

8.
The self and mutual radiation impedances for rectangular piston(s) arbitrarily located on a rigid prolate spheroidal baffle are formulated. The pistons are assumed to vibrate with uniform normal velocity and the solution is expressed in terms of a modal series representation in spheroidal eigenfunctions. The prolate spheroidal wave functions are obtained using computer programs that have been recently developed to provide accurate values of the wave functions at high frequencies. Results for the normalized self and mutual radiation resistance and reactance are presented over a wide frequency range for different piston sizes and spheroid shapes.  相似文献   

9.
This paper deals with the computational simulation of both scalar wave and vector wave propagation problems in infinite domains. Due to its advantages in simulating complicated geometry and complex material properties, the finite element method is used to simulate the near field of a wave propagation problem involving an infinite domain. To avoid wave reflection and refraction at the common boundary between the near field and the far field of an infinite domain, we have to use some special treatments to this boundary. For a wave radiation problem, a wave absorbing boundary can be applied to the common boundary between the near field and the far field of an infinite domain, while for a wave scattering problem, the dynamic infinite element can be used to propagate the incident wave from the near field to the far field of the infinite domain. For the sake of illustrating how these two different approaches are used to simulate the effect of the far field, a mathematical expression for a wave absorbing boundary of high-order accuracy is derived from a two-dimensional scalar wave radiation problem in an infinite domain, while the detailed mathematical formulation of the dynamic infinite element is derived from a two-dimensional vector wave scattering problem in an infinite domain. Finally, the coupled method of finite elements and dynamic infinite elements is used to investigate the effects of topographical conditions on the free field motion along the surface of a canyon.  相似文献   

10.
Beamforming with uniform circular microphone arrays can be used for localizing sound sources over 360°. Typically, the array microphones are suspended in free space or they are mounted on a solid cylinder. However, the cylinder is often considered to be infinitely long because the scattering problem has no exact solution for a finite cylinder. Alternatively one can use a solid sphere. This investigation compares the performance of a circular array mounded on a rigid sphere with that of such an array in free space and mounted on an infinite cylinder, using computer simulations. The examined techniques are delay-and-sum and circular harmonics beamforming, and the results are validated experimentally.  相似文献   

11.
Analytical equations describing radiation characteristics of an oscillating ring in a circular finite baffle are derived, including the limiting case of a dipole point source at the center. An oscillating sphere would represent the ideal dipole source, having a constant directivity pattern at all frequencies, but would be inconvenient to realize especially in portable devices. It is found that a planar piston with uniform surface velocity but variable phase arranged to emulate the sphere does not have such a smooth on-axis response as the sphere. Instead a planar piston with the same phase distribution but uniform pressure represents an ideal planar source with a smooth on-axis response and near constant directivity. The surface velocity is plotted and it is then shown that a similar response can be achieved using a finite number of concentric rings based on this velocity distribution.  相似文献   

12.
压电条SH声辐射场研究   总被引:6,自引:0,他引:6       下载免费PDF全文
张碧星  汪承灏 《物理学报》2005,54(5):2111-2117
具有一定宽度和厚度的无穷长压电条置于均匀各向同性半空间上, 压电条在电激励下产生机械振动从而在整个空间产生声场. 将压电条取为6mm晶系, 其对称主轴沿长度方向. 针对这 种压电换能器结构, 深入研究了SH波的激发和辐射特性. 首先将压电条中的声场展开为傅里 叶级数, 而将压电条下的无界半空间中的声场展开为傅里叶积分, 然后根据边界条件得到了 整个空间中声场的求解方案, 通过数值模拟计算了声场的分布特性, 并和传统方法进行了定 量的对比和分析. 最后采用最陡下降法(鞍点法)研究并得到了压电条声辐射场的远场近似表 达式, 分析了声场的指向性规律. 结果表明只有当频率f和压电条宽度a的乘积 fa<1 kHz·m 时, 传统方法得到的结果是可靠的,当频率升高时,压电条内应力和位移呈振荡式分布,频率愈高振荡愈激烈,且与传统方法的差异愈大.本文对声学微系统与声传感器件的研究具有 重要意义. 关键词: 压电条 6mm晶系 表面位移 指向性因子  相似文献   

13.
The MAE technique has been used in the field of fluid mechanics for many years. Only recently this technique has been applied to acoustic problems, where it has been found to be an excellent and powerful tool in analyzing either scattering and diffraction or radiation from moving rigid objects (propellers). The purpose of this paper is to very briefly review the MAE technique as applied to low frequency acoustics in general, and then apply the resulting approach to a series of progressively more difficult problems which are of interest to many underwater acousticians. The analysis is first applied to two problems with single degrees of freedom for structural vibrations: (1) a sphere, both velocity and force driven, and (2) a circular piston in infinite rigid baffle. These are classical problems and the solutions as obtained by the MAE technique are then compared to the exact classical solutions. The MAE solutions are then generalized to a more difficult problem, with two degrees of freedom for the surface vibration, where two concentric pistons in an infinite rigid baffle are vibrating and coupled via the fluid. For each of the problems analyzed, the structural wavelength a is assumed to be small compared to the fluid wavelength (i.e., ka ? 1). The inner region close to the vibrating structure, in which the fluid motion is effectively incompressible in nature, is governed by the Laplace equation while the outer solution is governed by the Helmholtz equation. The inner and outer solutions are obtained independently and are then joined together by the MAE matching procedure. A composite solution is then obtained from a combination of the inner and the outer solutions. Agreements with the exact theory for the radiated pressure, surface resistance and reactance are shown to be excellent.  相似文献   

14.
In this work,acoustic vector characteristics of near fields scattered by an underwater finite cylindrical baffle are investigated theoretically and experimentally.The analytic expressions for the scattered pressure and particle velocity are derived using the elastic thin shell theory.Calculations are presented for the scattered near fields of the pressure,the particle velocity and the intensity.It is found that the pressure and the particle velocity fields near the surface of the cylindrical baffle are characterized by complex interference structure,particle velocity directions and the source bearings are not consistent.The phase difference between the pressure and the particle velocity is not zero and the intensity vector does not reflect the sound bearings.It can be noted that the distortions of the fields will make the original vector signal processing method based on the free space assumption be no longer applicable in the presence of the cylindrical baffle.These results can serve as a basis of the application for the acoustic vector sensor on board.  相似文献   

15.
The self- and mutual radiation impedances and the farfield directional response of rectangular pistons conformal to a rigid elliptic cylindrical baffle are formulated. The pistons are assumed to vibrate with uniform normal velocity and the solution for the acoustic pressure is expressed in terms of a modal series representation in Mathieu functions. The Mathieu functions are obtained using computer programs that have been recently developed to provide accurate values of the functions at high frequencies. Results for the normalized self- and mutual radiation resistance and reactance and the directional response of acoustic radiation are presented over a wide frequency range for different piston sizes and elliptic cylinder cross section shapes.  相似文献   

16.
The problem of acoustic radiation from an infinite cylinder undergoing harmonic modal surface vibrations near a locally reacting planar boundary is considered. The formulation utilizes the appropriate wave field expansions, the classical method of images, and the translational addition theorem for cylindrical wave functions, along with a simple local surface reaction model involving a complex amplitude wave reflection coefficient applied to simulate the relevant boundary conditions for the given configuration. The analytical results are illustrated with a numerical example in which the cylindrical surface is immersed near a layer of fibrous material set on an impervious rigid wall. The numerical results reveal the important effects of interface local surface reaction and source position on the computed modal impedance component values and the radiated on-axis far-field pressure. The benchmark solution presented can lead to a better understanding of acoustic radiation from near-interface two-dimensional sources, which are commonly encountered problems in outdoor acoustics and noise control engineering. Eventually, it could be used to validate those found by numerical approximation techniques.  相似文献   

17.
刚性圆柱体上圆阵波束形成性能分析   总被引:4,自引:0,他引:4  
以环绕在刚性圆柱体上的均匀圆阵为阵列模型,分析了刚性圆柱体对圆阵响应的影响,在声场分解所得到的相位模式空间,推导了相位模式波束形成阵列和延迟求和波束形成阵列的白噪声增益和指向性指数的定量表达式,分析了它们在不同频率段的变化规律。在存在和不存在刚性圆柱体两种情况下,对两种阵列性能进行了对比分析。研究了圆阵与圆柱体之间存在间隙时对阵列接收信号及阵列性能的影响。仿真结果表明,在两种情况下相位模式波束形成处理都具有频率不变的指向性,但在低频段牺牲了阵列的鲁棒性;延迟求和波束形成处理在整个频率段具有较好的鲁棒性,但随频率的降低其波束指向性下降,直至变成各向同性阵列。存在刚性圆柱体时,两种阵列鲁棒性均有了一定的提高,前者的指向性不变,而后者的指向性得到了提高。圆阵与圆柱体之间的间隙会降低阵列在高频段的鲁棒性。   相似文献   

18.
The combined finite-element-boundary-element method is used to solve the problem on the radiation of a water-filled piezoceramic cylinder positioned near an infinite plane. For the case of a perfectly rigid plane, the frequency characteristics of the transmitting response of the piezoelectric cylinder are obtained along with the frequency characteristics of the acoustic power, the directional characteristics, and the velocity and pressure distributions over the radiating cylindrical surfaces. It is found that, when the distance between the plane and the piezoelectric cylinder is small relative to the wavelength, the frequency characteristics of the cylinder and the velocity and pressure distributions noticeably differ from those obtained for a piezoelectric cylinder in an infinite space. The effect of the antisymmetric mode, which appears at small wave distances between the cylinder and the plane, on the characteristics of a water-filled piezoelectric cylinder is considered.  相似文献   

19.
高宏林  黎胜  孟春霞 《声学学报》2019,44(1):106-115
为计算中高频半空间结构频带振动下声辐射问题,推导了基于能量源的半空间频率均方声压法(Frequency Averaged Quadratic Pressure,FAQP),并提出了改进的半空间FAQP法,克服了半空间FAQP法在失效频率下解不唯一的问题。频率带宽为4 Hz的刚性壁面作用下的脉动球和与自由表面相接触的脉动半球的声辐射数值计算,验证了改进的半空间FAQP法对解决失效频率下解不唯一问题的有效性。同时,刚性壁面作用下的脉动球和与自由表面相接触的脉动半球声辐射数值计算结果均表明,在1/3倍频程下,改进的半空间FAQP法与常规边界元方法相比,具有更高的计算精度,更适用于中高频计算。   相似文献   

20.
A numerical method of solving the problem of acoustic wave radiation in the presence of a rigid scatterer is described. It combines the finite element method and the boundary algebraic equation one. In the proposed method, the exterior domain around the scatterer is discretized, so that there appear an infinite domain with regular discretization and a relatively small layer with irregular mesh. For the infinite regular mesh, the boundary algebraic equation method is used with spurious resonance suppression according to Burton and Miller. In the thin layer with irregular mesh, the finite element method is used. The proposed method is characterized by simple implementation, fair accuracy, and absence of spurious resonances.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号