Cu(100)(2~(1/2)×22~(1/2))R45°-O的表面结构与电子态的密度泛函研究

用第一性原理的总能计算研究了Cu(100))面的表面结构、弛豫以及氧原子的(2×22)吸附状态.计算给出了Cu(100)(2×22)R45°-O吸附表面的结构参数,并得到了上述结构下氧吸附的Cu(100)表面氧原子和各层Cu原子的电子态密度.计算得到的吸附表面功函数为4.58eV,与清洁Cu(100)表面功函数(~4.53eV)几乎相同.吸附氧原子与最外层铜原子之间的垂直距离约为0.02nm,其能带结构体现出一定的金属性,同时由于Cu-O的杂化作用在费米能以下约6.4eV附近出现了局域的表面态.可以认为,在Cu(100)(2×22)R45°的氧吸附表面结构下,吸附氧原子和衬底之间的结合主要来源于表面最外层铜原子与氧原子的相互作用.     

Cu(100)(√2×2√2)R 45°-O的表面结构与电子态的密度泛函研究

用第一性原理的总能计算研究了Cu(100))面的表面结构、弛豫以及氧原子的(√2×2√2)吸附状态.计算给出了Cu(100)(√2×2√2)R45°-O吸附表面的结构参数,并得到了上述结构下氧吸附的Cu(100)表面氧原子和各层Cu原子的电子态密度.计算得到的吸附表面功函数φ为4.58 eV,与清洁Cu(100)表面功函数(～4.53 eV)几乎相同.吸附氧原子与最外层铜原子之间的垂直距离约为0.02 nm,其能带结构体现出一定的金属性,同时由于Cu-O的杂化作用在费米能以下约6.4 eV附近出现了局域的表面态.可以认为,在Cu(100)(√2×2√2)R45°的氧吸附表面结构下,吸附氧原子和衬底之间的结合主要来源于表面最外层铜原子与氧原子的相互作用.     

Cu(100) (2×22)R45°-O的表面结构与电子态的密度泛函研究

用第一性原理的总能计算研究了Cu(100))面的表面结构、弛豫以及氧原子的(2×22)吸附状 态.计算给出了Cu(100) (2×22)R45°-O吸附表面的结构参数，并得到了上述结构下氧吸附 的Cu(100)表面氧原子和各层Cu原子的电子态密度.计算得到的吸附表面功函数为4.58 eV ，与清洁Cu(100)表面功函数(～4.53 eV)几乎相同.吸附氧原子与最外层铜原子之间的垂直 距离约为0.02 nm，其能带结构体现出一定的金属性，同时由于Cu-O的杂化作用在费米能以 下约6.4 eV附近出现了局域的表面态.可以认为，在Cu(100) (2×22)R45°的氧吸附表面结 构下，吸附氧原子和衬底之间的结合主要来源于表面最外层铜原子与氧原子的相互作用. 关键词： Cu(100)(2×22)R45°-O表面 缺列再构 表面电子态     

MoSi_2(001)表面的氧吸附行为

运用第一原理密度泛函理论方法,首先计算了MoSi_2各清洁表面的表面能,(001)Si-|-Si断面具有较低的表面能,是MoSi_2最可能的解理面;通过生成能及键布居分析研究了单氧原子、双氧原子及氧分子在(001)Si-|-Si断面的吸附行为,发现单氧原子在空位处吸附最稳定,此时O极易与Si结合,得到的Si-O-Si键长及键角与SiO_2的非常接近,表明低浓度下O极易与表面的Si结合生成SiO_2;双氧原子发生空位+顶位吸附时O原子除与Si有强作用外,可与Mo有一定相互作用;氧分子以平行的方式接近空位最有利于吸附,此时氧分子最易分解为氧原子,发生氧原子在空位的吸附.     

MgO、SnO_2、TiO_2表面氧空位性质对气体光学传感特性的影响

光学气敏传感器是当今研究领域的一个热门方向.文章采用密度泛函理论(DFT)体系下广义梯度近似(GGA)第一性原理平面波超软赝势方法,分析和计算了光学气敏材料岩盐型MgO、金红石型SnO_2和锐钛矿型TiO_2表面氧空位的特性.以CO作为吸附分子进行微观机理研究,研究不同氧化物表面吸附气体分子的机理.对氧化物表面的几何结构、吸附能、态密度、差分电荷密度、电荷布居、电荷转移、光学性质等进行分析.研究发现:含有氧空位缺陷的MgO(001)、SnO_2(110)和TiO_2(101)能稳定的吸附CO分子,吸附后造成了材料光学性质的变化,可作为光学气敏传感材料.分析发现:氧空位氧化能力的大小是光学性质改变的核心原因.表面吸附CO分子后,发现SnO_2(110)表面对分子的吸附能最大,分子与表面的吸附距离最短.通过差分电荷密度和电荷布居数发现,表面与CO分子间存在电荷转移,其转移电子数目大小为:SnO_2(110)TiO_2(101)MgO(001),由此得出不同氧化物表面氧化性的大小为:SnO_2(110)TiO_2(101)MgO(001);通过对比吸收谱和反射谱发现:吸附气体分子后SnO_2(110)表面的光学性质变化最为明显,是一种较好的光学气敏传感材料.     

β-SiC(001)-(2×1)表面结构的第一性原理研究

利用缀加平面波加局域轨道(APW+LO)的第一性原理方法计算了β-SiC(001)-(2×1)表面的原子及电子结构. 原子结构的计算结果表明，与Si(001)-(2×1) 表面的非对称性Si二聚体模型不同，β-SiC(001)-(2×1)表面为对称性的Si二聚体模型，其二聚体的Si原子间键长也较大，为0.269nm. 电子结构的计算结果表明，在费米能级处有明显的态密度，因此β-SiC(001)-(2×1)表面呈金属性. 在带隙附近存在四个表面态带,其中的两个占有表面态带已由价带的同步辐射光电子能谱实验得到证实. 关键词： 碳化硅 缀加平面波加局域轨道方法 原子结构 电子结构     

Au(110)表面结构和氧原子吸附的第一性原理研究

用密度泛函理论(DFT)研究了金属Au(110)表面结构以及氧原子的吸附状态.计算得到Au(110)-(1×2)缺列再构表面原子的弛豫分别是-15.0%(Δd₁₂/d₀)和-1.1%(Δd₂₃/d₀),表面能为52.7 meV/²,功函数Φ=5.00 eV;Au(110)-(1×3)缺列再构表面的Δd_{1 关键词： 缺列再构Au(110)表面 STM图像 氧原子吸附}     

NiTi(110)表面氧原子吸附的第一性原理研究

为了研究给定的NiTi的表面氧化过程,在保持体系中Ni和Ti原子总数相等的条件下,构建了一系列Ti原子在表面反位的c(2×2)-NiTi(110)缺陷体系,并利用第一性原理计算研究了氧原子在各种NiTi(110)反位缺陷体系的吸附行为以及表面形成能.计算结果表明:吸附氧原子的稳定性与表面Ti原子的富集程度有很大的关联性,体系表面Ti原子富集程度越高,氧原子吸附的稳定性越高;当覆盖度较高时,由于氧原子的吸附,可使Ni和Ti原子在表面出现反位.在富氧条件(μ_o≥-9.35 eV)下,氧原子在表面第1层中的全部Ni原子与第3层全部Ti换位的反位缺陷体系上的吸附最稳定,此时随着氧原子的吸附,表面上的Ti原子升高,导致向上膨胀生长形成二氧化钛层,且在其下方形成富Ni层,由此可合理地解释实验上发现NiTi合金氧化形成二氧化钛层的可能原因.     

单原子Pt吸附于不同原子暴露终端BiOBr{001}面的第一性原理研究

基于密度泛函理论(density functional theory, DFT)的第一性原理方法研究了暴露不同原子终端的BiOBr{001}表面以及单原子Pt吸附于BiOBr{001}-BiO不同位置的几何构型、电子结构、光学性质和电荷转移.计算结果表明:BiOBr{001}面BiO终端暴露可诱导产生表面态且价带和导带能级向低能方向移动,光氧化性增强,尤其导带下方出现的表面态能级有助于光生电子-空穴对的分离和迁移,光吸收显著增强,且BiOBr{001}面BiO终端的功函数远低于贵金属Pt,有利于电荷定向转移.其次,单原子Pt吸附于BiOBr{001}-BiO为基底的表面,在禁带中间诱导产生杂质能级, Pt吸附于穴位时吸附能最小,光响应能力最好且电荷转移量最大,吸附于顶位和桥位时,形成开放性的贫电子区域,因此可预测穴位为Pt原子的吸附位点,预示其良好的降解有机污染物效果, Pt吸附于BiOBr{001}-BiO的顶位和桥位,具有潜在的CO_2还原或固氮等领域应用.     

氧氢氧化铁对偶氮染料脱色作用的红外光谱研究

采用傅里叶变换显微红外光谱仪(FTIR),研究了两种纳米氧氢氧化铁矿(α-FeOOH),正方纤铁矿(β-FeOOH)对偶氮染料分子甲基橙和酸性红G的脱色作用.结果表明,(1)甲基橙和酸性红G在氧氢氧化铁表面位＞(＞为α或β)FeOH易形成配合物,尤其是具有两个-SO3 Na基团双齿结构的酸性红G易与纳米氧氢氧化铁发生配合反应被化学吸附,而具有较高的脱色率.(2)吸附脱色2 h后氧氢氧化铁的红外光谱中出现了1 033和1 030 cm-1的-SO3Na基团的特征波数,而1 450～1 400 cm-1的偶氮双键的振动吸收峰减弱或者消失,表明偶氮染料分子是通过带负电的-SO3 Na基团吸附到氧氢氧化铁表面,有机还原性配体与氧氢氧化铁表面Fe3 原子中心电荷转移的过程能一定程度上使偶氮键断裂而使染料发生氧化还原脱色.由以上结果推论:两种偶氮染料的脱色是选择性的化学吸附与氧氢氧化铁界面的氧化还原降解共同作用的结果.     

Alkali metal (Li, K) induced reconstructions of the W(001) surface

The adsorption of Li and K atoms on the (001) surface of tungsten is found to exhibit remarkable differences in the surface core-level shifts (SCLS) of the W 4f level and in adsorbate-induced changes of the transition temperature of the substrate surface reconstruction. Density-functional theory calculations suggest that these results reflect mainly the different bonding geometry of the adatoms, and, for example, the adsorption of potassium is largely affected by an adsorbate-induced reconstruction of the substrate (dimerization of W atoms).     

CO adsorption on oxygen-modified molybdenum surfaces

Structures of carbon monoxide layers on the oxygen-modified Mo(1 1 0) and Mo(1 1 2) surfaces have been investigated by means of density-functional (DFT) calculations. It is found that CO molecules adsorb at hollow sites on the O/Mo(1 1 0) surface and nearly atop Mo atoms on the O/Mo(1 1 2) surface. The favorable positions for adsorption are shown to be near protrusions of electron density above the Mo surface atoms. The presence of oxygen on the molybdenum surface significantly reduces the binding energy of the CO molecule with the substrate; on the oxygen-saturated Mo(1 1 0) surface, the adsorption of CO is completely blocked. The calculated local densities of states (LDOS) demonstrate that the O 2s peak for O adsorbed on Mo(1 1 0) surface is at −19 eV (with respect to the Fermi level), while for the oxygen atom of an adsorbed CO molecule the related 3σ molecular orbital gives rise to a peak at −23 eV. This difference stems from the bonding of the O atom either with Mo surface for adsorbed O or with C atom in adsorbed CO, and therefore the position of the O 2s peak in photoemission spectra can serve as a convincing argument in favor of either the presence or absence of the CO dissociation on Mo surfaces.     

Following the oxidation of yttrium silicide epitaxially grown on Si(1 1 1) by core level photoemission spectroscopy

We have identified, by means of synchrotron radiation X-ray photoemission spectroscopy, several core-level shifted components in the Si-2p photoemission core level peak from a thin yttrium silicide layer epitaxially grown on a Si(1 1 1) surface. We have unequivocally assigned these components to different environments of the Si atoms in the silicide structure. This information has been used to monitor a surface oxidation process promoted by room temperature oxygen adsorption, identifying the final product of this reaction as a silicate-type ternary compound.     

Density functional theory study of the NO2-sensing mechanism on a WO3 (0 0 1) surface: the role of surface oxygen vacancies in the formation of NO and NO3

The trapping and detection of nitrogen oxide with tungsten trioxide has become a popular research topic in recent years. Knowledge of the complete reaction mechanism for nitrogen oxide adsorption is necessary to improve detector performance. In this work, we used density functional theory (DFT) calculations to study the adsorption characteristics and electron transfer of nitrogen dioxide on an oxygen-deficient monoclinic WO₃ (0 0 1) surface. We observed different reactions of NO₂ on slabs with different O- and WO-terminated WO₃ (0 0 1) surfaces with oxygen vacancies. Our calculations show that the bridging oxygen atom on an oxygen defect on an O-terminated WO₃ (0 0 1) surface is the active site where an NO₂ molecule is oxidised into nitrate and is adsorbed onto the surface. On a WO-terminated (0 0 1) surface, one of the oxygen atoms from the NO₂ molecule fills the oxygen vacancy, and the resulting NO fragment is adsorbed onto a W atom. Both of these adsorption models can cause an increase in the electrical resistance of WO₃. We also calculated the adsorption energies of NO₂ on slabs with different oxygen-deficient WO₃ surfaces.     

Alkali metal-induced Si(1 1 1) structure: The Na case

We report the first scanning tunneling microscopy (STM) and core-level photoemission (CL-PES) studies of a structure induced by sub-monolayer Na deposition on the Si(1 1 1) surface. In the filled-state STM images, five bright protrusions in the unit cell are located on the Ag trimers of the structure. The Si 2p core-level photoemission decomposition shows that the surface-shifted component originated from the Si-trimer atoms in the surface splits into two for the structure, which are attributed to the Si-trimer atoms in the unit cell which are affected and unaffected by the Na adsorption. These results show strong similarities between the Na-induced superstructure and the noble metal-induced ones, indicating a common atomic structure and formation mechanism.     

Adsorption of PTCDI on Au(1 1 1): Photoemission and scanning tunnelling microscopy

The adsorption of perylene-3,4,9,10-tetracarboxylic-3,4,9,10-diimide (PTCDI) on Au(1 1 1) has been studied using synchrotron-based X-ray photoelectron spectroscopy and in situ scanning tunnelling microscopy. Direct topographic and surface coverage information provided by the scanning probe measurements have enabled us to correlate peaks in the relatively complex carbon core-level photoemission to interactions of the surface with different parts of the PTCDI molecule. A strong interaction between the imide ends of the molecule with the underlying gold substrate is evidenced by a large chemical shift in the imide carbon peaks, which is observed only for the first adsorbed layer.     

甲醇溶液中苯基硫脲吸附在薄层铁电极上的表面拉曼光谱研究

甲醇溶液中苯基硫脲吸附在薄层铁电极上的表面拉曼光谱研究顾仁敖邓正发姚建林曹佩根胡培荣（苏州大学化学化工学院苏州２１５００６）ＳｕｒｆａｃｅＲａｍａｎＳｐｅｃｔｒｏｓｃｏｐｉｃＳｔｕｄｉｅｓｏｆＰｈｅｎｙｌ┐ｔｈｉｏｕｒｅａｏｎＦｅＥｌｅｃｔｒｏｄｅ...     

First-principles study of carbon atoms adsorbed on MgO(100) related to graphene growth

We have performed density functional theory calculations to understand the initial growth of graphene by studying the adsorption of carbon atoms on the oxide substrates such as magnesium oxide. For adsorption behaviors of carbon atoms on the MgO(100) surface, their adsorption geometries and binding energies are calculated. The binding of a carbon atom is the most stable at the on-top oxygen site on MgO(100). Such strong C–O binding is analyzed by examining the projected density of states. Then, we also increase the number of carbon atoms on MgO(100) to investigate their adsorption behaviors. Due to strong binding between carbon atoms, adsorbed carbon atoms form chain-like or graphene-like structures on the surface. Combined with relatively strong C–O binding, this result may explain the graphene growth on MgO(100) observed in available experiments.     

Surface properties of clean and Au or Pd covered hematite (α-Fe(2)O(3)) (0001)

The structure and electronic properties of different terminations of the α-Fe(2)O(3)(0001) surface were studied with spin-polarized density functional theory (DFT) and the DFT + U method accounting for the effect of strong on-site Coulomb correlations. The results for lattice relaxation, electronic and magnetic properties are presented and discussed. Though the DFT and DFT + U methods provide qualitatively very similar surface geometries they differ very much in the prediction of the electronic and magnetic properties, and the surface energetics of the clean α-Fe(2)O(3)(0001). The most stable single iron terminated (0001) surface and the oxygen-rich termination were chosen to study Au and Pd atom adsorption. The results show that both Au and Pd bind strongly to hematite surfaces and induce large changes in their geometry. The DFT + U bonding is weaker by 0.3-0.6 eV than DFT on the iron terminated surface and about 2 eV stronger on the oxygen terminated one. The binding is stronger for Pd than Au and for both adsorbates is distinctly stronger at the oxygen than at the iron terminated surface. On the iron terminated surface the adsorption binding energy per adatom increases both with Au and Pd coverage, whereas for the oxygen terminated one the opposite trend is observed.     

甲基和羟基在Ir(111)表面吸附的密度泛函理论研究

在超原胞近似和slab模型基础上,采用周期性密度泛函理论,在0.11覆盖度（ML）下,对甲基与羟基在Ir(111)表面的吸附进行了研究,得到了甲基和羟基在Ir(111)表面不同吸附位置的吸附能和吸附构型,计算了它们的振动频率,同时分析了甲基和羟基共吸附于Ir(111)表面的情况。结果表明,甲基和羟基在Ir(111)表面的最稳定吸附位置都是top位,甲基是碳端向下吸附,羟基是通过氧端向下倾斜吸附。通过频率分析发现吸附后CH3中C-H键的对称伸缩振动、反对称伸缩振动以及剪切振动频率均发生了红移,而羟基中的O-H键的振动频率发生蓝移现象。通过计算对比发现甲醇分解为甲基和羟基过程是一个放热反应,从热力学角度来说该反应是可行的。