共查询到20条相似文献,搜索用时 109 毫秒
1.
用布拦格光纤光栅制作啁啾光纤光栅 总被引:1,自引:1,他引:0
介绍了一种用布拉格光纤光栅制作啁啾光纤光栅的方法。采用氢酸腐蚀布拉格光纤光栅,使光栅的横截面沿光栅轴向逐渐变小,然后对光栅施加1.50N的拉力,在光栅轴向建立应变梯度,制作出长15mm、峰值反射率达92%、反射半高宽为5nm的啁啾光纤光栅。 相似文献
2.
3.
基于光纤布拉格光栅传感器的光纤光栅智能夹层试验研究 总被引:18,自引:4,他引:14
传感元件与复合材料的一体化是智能结构研究的最终目标之一。设计一种具有自诊断功能的标准化、模块化光纤智能夹层系统,正是实现这种一体化最有潜力的技术途径。采用聚酰亚胺薄膜制作了基于光纤布拉格光栅(FBG)传感器的光纤光栅智能夹层,对智能夹层中光纤布拉格光栅传感器的应变、温度特性进行了标定试验,并建立了基于光纤布拉格光栅传感器光纤光栅智能夹层的应变、温度测量模型。试验表明,智能夹层内布拉格光栅波长偏移与应变、温度之间具有良好的线性关系。不过在温度测量时,必须考虑被埋人结构的热膨胀效应。利用光纤光栅智能夹层内光纤布拉格光栅传感器网络和先进信息处理技术,可以建立结构损伤主动、在线和实时监测系统。 相似文献
4.
5.
6.
为了实现在侧边抛磨光纤(SPF)上制作布拉格光栅结构并提高器件设计灵活性,利用重铬酸盐明胶(DCG)作为光刻材料,提出一种新型的光纤表面布拉格光栅制作方法并对该器件温度传感特性进行研究。使用轮式抛磨系统制作SPF,并在SPF侧抛面上旋涂DCG,通过干涉光束曝光显影制作表面布拉格光栅。光谱测量表明:带有布拉格光栅的侧边抛磨光纤在1 480.2 nm处有透射谷,在相应位置反射谱有明显反射峰,其调制幅度达到15.9 dB,这是由于表面光栅的布拉格反射所致。温度传感实验表明,该布拉格反射峰的温度灵敏度为17.84 pm/℃。这种器件已在光纤传感和光纤滤波器等方面获得应用。 相似文献
7.
8.
载氢光纤光致折变布拉格光栅 总被引:10,自引:4,他引:6
报道用193nmArF准分子激光,经过石英相位版的空间调制,在载氢增敏处理过的通信光纤上写入光致折射率变化的布拉格光栅,在光栅布拉格波长上(λ=1.53μm)测得的反射率大于90%,半高全宽线宽小于0.6nm。 相似文献
9.
10.
11.
12.
SHU Xuewen SHI Wei JIANG Shan HUANG Dexiu 《Chinese Journal of Lasers》2000,9(4):319-324
1 Introduction Fibergratingsareprovedtobeoneofthemostimportantrecentdevelopmentsinthefieldofopticalfibertelecommunicationsandsensing .Theyarelikelytohaveapplicationintwomainareas:dispersioncompensationinlong haulfibernetworks[1,2 ]andwavelengthroutinginw… 相似文献
13.
Zhao Zhiyong Zhang Shuang Yu Yongsen Zhuo Zhongchang Zhang Jian Zheng Wei Zhang Yushu 《Optical and Quantum Electronics》2004,36(6):499-506
In this letter a simple method for fabricating tunable sampled nonlinearly chirped fiber Bragg gratings (SNCFBGs) is demonstrated
experimentally. A SNCFBG is formed when tension is applied to an etched sampled fiber Bragg grating (SFBG), whose cross-section
area's reciprocal varies along the length of the SFBG. The chirp of the grating period and the sampled period can be tuned
by adjusting the strain gradients, and the dispersion and dispersion slope can also be compensated. 相似文献
14.
双波长啁啾相移光纤光栅 总被引:2,自引:2,他引:0
理论研究并实验验证了一种含有两段π相移的啁啾相移光纤光栅.采用F矩阵对啁啾相移光纤光栅进行计算并分析了该光栅的谱特性.含有两段π相移的啁啾相移光纤光栅可以在普通啁啾光栅透射谱阻带中产生双波长透射峰,透射峰位置直接取决于光栅中π相移的位置,透射峰的线宽和透射峰的波长间隔没有关系,仅随着啁啾率的增大而增大.采用带相位掩模的逐点扫描法对含有两段π相移的双波长啁啾相移光栅进行了制作,获得波长间隔为8 nm的双波长透射谱的光栅器件.该光栅的消光比和3 dB谱线宽分别为20 dB和0.08 nm,实验结果和理论设计一致. 相似文献
15.
16.
提出了一种利用非线性二次曝光技术制作三角形光纤Bragg光栅的新方法.该方法只使用普通Bragg位相模板,采用两次曝光技术,通过控制光纤光栅的本地谐振波长和反射率,达到控制光纤光栅谱形的目的.第一次直接对光纤曝光,用来控制光纤光栅谐振波长;第二次通过位相模板曝光,用来控制光纤光栅的反射率.考虑到光敏光纤感光特性曲线的多项e负指数变化规律,按照"分步写入光纤光栅设计软件"进行曝光分布设计,利用"分步曝光光纤光栅写入系统"进行曝光控制,使用信息产业部第46研究所生产的DCS-01型光敏光纤,得到了线性范围1.24 nm、反射率为0~64%的三角形光纤Bragg光栅.三角形光纤Bragg光栅作为光纤光栅传感解调器件,在光纤传感领域具有重要应用价值. 相似文献
17.
By introducing a convergent lens in the phase mask setup and by tilting appropriately the fiber from the phase mask, a linearly chirped fiber grating with an appropriate chirp can be obtained conveniently. Using this method, two groups of fiber gratings, each of them is composed of 8 overlaped linearly chirped fiber gratings but with different center reflection wavelength separations (~0.8 nm and ~1.6 nm, respectively) are fabricated. Experimental results show that, the compensators based on the two groups of fiber gratings can be used to compensate for the dispersion of 8×2.5 Gb/s transmission over 100 km of standard single-mode fiber for multiple channels in optical time-division multiplexing (OTDM) and densed wavelength division multiplexing (DWDM). 相似文献
18.
Dispersion Compensators Based on Overlaped Linearly Chirped Fiber Gratings for DWDM Systems 总被引:1,自引:0,他引:1
1 Introduction ThereisagreatdealofinterestinfiberBragggratingsduetotheirmanyimportantapplicationsinthefieldoftelecommunicationsandfibersensors .BecausefiberBragggratingsexhibitdispersionbothinreflection ,especiallywhenthe gratingischirped[1] ,andintransm… 相似文献
19.