基于受激辐射信号的谱域光学相干层析分子成像方法

鉴于不同生理病理状态下组织复折射率实部的变化不大,传统光学相干层析(OCT)成像技术在分子特异性识别上存在先天不足.为此,本文提出了基于受激辐射信号的OCT成像方法,可在实现传统散射成像的同时,实现基于受激辐射信号的分子成像.在超高分辨率谱域OCT系统的基础上,通过增设光谱分光与调制抽运光支路,建立了基于单宽谱光源的抽运探测谱域OCT系统,详细推导了调制抽运下受激辐射信号的获取与成像公式.利用搭建的抽运探测谱域OCT系统,实现了瞬态受激辐射信号的相干探测.基于同时获取的受激辐射OCT信号和传统OCT信号,成功重构了氮化物粉末构建样品的基于受激辐射信号的分子对比OCT图像.     

Fourier domain optical coherence tomography using optical demultiplexers imaging at 60,000,000 lines/s

We describe high-speed Fourier domain optical coherence tomography (OCT) using optical demultiplexers (ODs) for spectral dispersion. The OD enables separation of a narrow spectral band of 14 GHz (0.11 nm) from a broadband incident light at 256 different frequencies in 25.0 GHz intervals centered at 192.2 THz (1559.8 nm). OCT imaging of 60,000,000 axial scans per second was achieved through parallel signal acquisition using 256 balanced photoreceivers to simultaneously detect all the output signals from the ODs in a Fourier domain OCT system. OCT imaging at a 16 kHz frame rate, 1100 A-lines per frame, 3 mm depth range, and 23 microm resolution was demonstrated using a resonant scanner for lateral scanning.     

Spectral domain second-harmonic optical coherence tomography

Optical coherence tomography (OCT) provides micrometer-scale structural imaging by coherent detection of backscattered light. Molecular contrast in OCT has been demonstrated using transient absorption, coherent anti-Stokes Raman scattering, and second-harmonic (SH) generation. The sensitivity of molecular contrast signals can be enhanced by use of Fourier domain techniques. We have constructed a spectrometer-based Fourier domain SH-OCT system for simultaneous acquisition of the fundamental and SH signals. We report a >30 dB increase in SH sensitivity over a similar time domain SH-OCT system and demonstrate contrast between cartilage and bone using collagen as the contrast agent.     

Iterative sparse reconstruction of spectral domain OCT signal

We propose and study an iterative sparse reconstruction for Fourier domain optical coherence tomography （FD OCT） image by solving a constrained optimization problem that minimizes L-1 norm. Our method takes the spectral shape of the OCT light source into consideration in the iterative image reconstruction procedure that allows deconvolution of the axial point spread function from the blurred image during reconstruction rather than after reconstruction. By minimizing the L-1 norm, the axial resolution and the signal to noise ratio of image can both be enhanced. The effectiveness of our method is validated using numerical simulation and experiment.     

Range Technique in Scattering Medium Using a Needle-Fiber Optical Coherence Tomography System

A needle-fiber optical coherence tomography (OCT) system designed for guiding epidural anesthesia to a target is presented. In the preliminary experiment, a desired target in tofu as a strong scattering medium can be monitored over a sufficient range of several millimeters within a short measuring time. The axial resolution is 21 μm. In order to investigate the ranging performance, the relation between background noise levels and focus-scattering properties in a confocal optical system is numerically studied by use of Monte Carlo technique. Numerical results indicate that an appropriate focal length of the lens attached to the fiber should be used to separate the OCT signal from strong noise in strongly scattered medium.     

Simulation of polarization-sensitive optical coherence tomography images by a Monte Carlo method

We introduce a new Monte Carlo (MC) method for simulating optical coherence tomography (OCT) images of complex multilayered turbid scattering media. We demonstrate, for the first time of our knowledge, the use of a MC technique to imitate two-dimensional polarization-sensitive OCT images with nonplanar boundaries of layers in the medium like a human skin. The simulation of polarized low-coherent optical radiation is based on the vector approach generalized from the iterative procedure of the solution of Bethe-Saltpeter equation. The performances of the developed method are demonstrated both for conventional and polarization-sensitive OCT modalities.     

Spectral domain optical coherence tomography imaging with an integrated optics spectrometer

We designed and fabricated an arrayed-waveguide grating (AWG) in silicon oxynitride as a spectrometer for spectral domain optical coherence tomography (SD-OCT). The AWG has a footprint of only 3.0 cm × 2.5 cm, operates at a center wavelength of 1300 nm, and has 78 nm free spectral range. OCT measurements are performed that demonstrate imaging up to a maximum depth of 1 mm with an axial resolution of 19 μm, both in agreement with the AWG design parameters. Using the AWG spectrometer combined with a fiber-based SD-OCT system, we demonstrate cross-sectional OCT imaging of a multilayered scattering phantom.     

Three‐Dimensional,Time‐Resolved Profiling of Ferroelectric Domain Wall Dynamics by Spectral‐Domain Optical Coherence Tomography

We apply here spectral‐domain optical coherence tomography (SD‐OCT) for the precise detection and temporal tracking of ferroelectric domain walls (DWs) in magnesium‐doped periodically poled lithium niobate (Mg:PPLN). We reproducibly map static DWs at an axial (depth) resolution down to ～ 0.6 μm, being located up to 0.5 mm well inside the single crystalline Mg:PPLN sample. We show that a full 3‐dimensional (3D) reconstruction of the DW geometry is possible from the collected data, when applying a special algorithm that accounts for the nonlinear optical dispersion of the material. Our OCT investigation provides valuable reference information on the DWs’ polarization charge distribution, which is known to be the key to the electrical conductivity of ferroelectric DWs in such systems. Hence, we carefully analyze the SD‐OCT signal dependence both when varying the direction of incident polarization, and when applying electrical fields along the polar axis. Surprisingly, the large backreflection intensities recorded under extraordinary polarization are not affected by any electrical field, at least for field strengths below the switching threshold, while no significant signals above noise floor are detected under ordinary polarization. Finally, we employed the high‐speed SD‐OCT setup for the real‐time DW tracking upon ferroelectric domain switching under high external fields.     

Real time en face Fourier-domain optical coherence tomography with direct hardware frequency demodulation

We demonstrate en face swept source optical coherence tomography (ss-OCT) without requiring a Fourier transformation step. The electronic optical coherence tomography (OCT) interference signal from a k-space linear Fourier domain mode-locked laser is mixed with an adjustable local oscillator, yielding the analytic reflectance signal from one image depth for each frequency sweep of the laser. Furthermore, a method for arbitrarily shaping the spectral intensity profile of the laser is presented, without requiring the step of numerical apodization. In combination, these two techniques enable sampling of the in-phase and quadrature signal with a slow analog-to-digital converter and allow for real-time display of en face projections even for highest axial scan rates. Image data generated with this technique is compared to en face images extracted from a three-dimensional OCT data set. This technique can allow for real-time visualization of arbitrarily oriented en face planes for the purpose of alignment, registration, or operator-guided survey scans while simultaneously maintaining the full capability of high-speed volumetric ss-OCT functionality.     

结合计算层析与光学相干层析测量折射率分布

通过将计算层析技术与光学相干层析技术相结合,测量散射介质非均匀折射率分布。该方法测量散射样品折射率分布时,通过光学相干层析技术测量散射样品折射率分布在多个方向上的投影,采用计算层析技术实现对样品折射率分布的层析重建,克服了传统折射率光学测量方法如单纯的基于光学相干层析原理的焦点追迹法和光程匹配法,不能测量散射介质非均匀折射率分布的缺点。采用该方法在实验中对梯度折射率棒的径向相对折射率分布进行层析重建,取得了较好的实验结果。     

Improved signal-to-noise ratio in spectral-domain compared with time-domain optical coherence tomography

A signal-to-noise ratio (SNR) analysis is presented for optical coherence tomography (OCT) signals in which time-domain performance is compared with that of the spectral domain. A significant SNR gain of several hundredfold is found for acquisition in the spectral domain. The SNR benefit is demonstrated experimentally in a hybrid time-domain-spectral-domain OCT system.     

二维随机介质中准态模的频谱时间演化特性

采用时域有限差分法数值求解Maxwell方程组，分析了平面随机介质中光波模式的频谱时间演化特性.随机介质的特征可以用散射颗粒的随机构形、介质参数（如颗粒的尺寸和填充率等）以及介质形态等因素来描述.这些因素决定了随机介质在准稳态下模式的频率特性与数量，但具有不同因素的随机介质中模式的产生、选择与演化，具有大致相同的特征与速度.平面随机介质的这些冷腔特性，与传统光腔中模式的产生、选择和演化的特征非常相似. 关键词： 激光物理 随机激光器 无序介质中的光学特性     

飞秒互相关时间选通技术用于光学层析成像的实验研究

利用飞秒互相关二次谐波信号时间选通技术。实现了对埋藏在高度散射介质中物体的透射成像和反射以析成像。互相关选通门有效地选出携带物体信息的弹道光子和蛇行光子，排除了给成像带来背景噪声的温射光子，分别获得了散射介质中物体的二次谐波一维和二维图像。     

Real Time and Full-range Complex Fourier Domain Optical Coherence Tomography

High speed complex full-range Fourier domain optical coherence tomography (FD-OCT) is demonstrated. This FD-OCT requires only a single A-scan for each single transversal position for full-range Fourier domain optical coherence tomography. The Fourier transform method is applied along the direction of the B-scan to reconstruct complex spectra, and the complex spectra compose a full-range OCT image.     

Jones Matrix Imaging of Biological Samples Using Parallel-Detecting Polarization-Sensitive Fourier Domain Optical Coherence Tomography

A polarization-sensitive Fourier domain optical coherence tomography (PS-FD-OCT) system has been developed. By using a two-dimensional CCD camera, this PS-FD-OCT simultaneously obtains two spectral interferograms corresponding to orthogonal polarization components of a probing beam. FD-OCT avoids axial mechanical scanning, therefore, two OCT images are obtained by a single lateral scanning. This system requires only two one-dimensional scannings for determining the Müller matrix images of a sample. In the Müller matrix images, the birefringence properties of the inner surface of a porcine esophagus are revealed.     

复谱频域OCT成像的研究

采用频域技术的OCT系统，深度扫描信息由背向散射光谱的傅立叶反变换获得，简化了轴向扫描过程，从而使快速OCT成像成为可能．为了实现复杂生物组织的OCT快速成像，消除谱频域OCT的“混叠”现象、重建样品的真实层析结构，本文引入了相移干涉技术，构建了一套满量程复谱频域OCT实验系统，并为系统设计了特殊的分束镜和移相器，为最终实现复杂生物组织的OCT快速成像提供了条件．     

Rapid numerical difference recurrent formula of nonlinear Schrödinger equation and its application

In this paper, a rapid numerical difference recurrent formula, in which it has been taken that the chromatic dispersion and the nonlinearity act together along each fiber segment, is established in the time domain by applying a Maclaurin expansion to the differential form of the nonlinear Schrödinger equation (NLSE) in the frequency domain. The calculated results by using the established formula are contrasted with the known analytical results and the results of the split-step Fourier method (SSFM) and indicated that the rapid numerical difference recurrent formula is very accurate and more reasonable because it abandons an assumption that the dispersive and nonlinear effects can be assumed to act independently as the optical field propagates over each fiber segment. It has been concluded that the established formula in this paper is a scientific, reasonable and effective numerical method for the study of light pulse propagation in a nonlinear optical medium.     

Numerical analysis of stimulated inelastic scatterings in ytterbium-doped double-clad fiber amplifier with multi-ns-duration and multi-hundred-kW peak-power output

We investigate the stimulated Brillouin scattering (SBS) and the stimulated Raman scattering (SRS) in an ytterbium-doped double-clad fiber amplifier that outputs optical pulses with multi-ns-duration and multi-hundred-kW peak-power. The ytterbium-doped double-clad fiber amplifier is simulated by a model which is composed of a set of propagation-rate equations. The simulated results show that SBS and SRS will deform the output signal pulse in both the time domain and the spectral domain, and degrade the performance of the ytterbium-doped double-clad fiber amplifier seriously. It is shown in our simulation that the troublesome SBS can be effectively suppressed by broadening the signal linewidth to a critical value of 0.07 nm in our calculation, and the effect of SRS can be suppressed using a large-mode-area fiber with proper length. The model and the simulated results are very useful for designing an ultra-high-power ytterbium-doped double-clad fiber amplifier.     

Extraction of optical scattering parameters and attenuation compensation in optical coherence tomography images of multilayered tissue structures

A recently developed analytical optical coherence tomography (OCT) model [Thrane et al., J. Opt. Soc. Am. A 17, 484 (2000)] allows the extraction of optical scattering parameters from OCT images, thereby permitting attenuation compensation in those images. By expanding this theoretical model, we have developed a new method for extracting optical scattering parameters from multilayered tissue structures in vivo. To verify this, we used a Monte Carlo (MC) OCT model as a numerical phantom to simulate the OCT signal for heterogeneous multilayered tissue. Excellent agreement between the extracted values of the optical scattering properties of the different layers and the corresponding input reference values of the MC simulation was obtained, which demonstrates the feasibility of the method for in vivo applications. This is to our knowledge the first time such verification has been obtained, and the results hold promise for expanding the functional imaging capabilities of OCT.     

Ultra-high resolution spectral domain optical coherence tomography using supercontinuum light source

An ultra-high resolution spectral domain optical coherence tomography (SD-OCT) was developed using a cost-effective supercontinuum laser. A spectral filter consists of a dispersive prism, a cylindrical lens and a right-angle prism was built to transmit the wavelengths in range 680–940 nm to the OCT system. The SD-OCT has achieved 1.9 μm axial resolution and the sensitivity was estimated to be 91.5 dB. A zero-crossing fringes matching method which maps the wavelengths to the pixel indices of the spectrometer was proposed for the OCT spectral calibration. A double sided foam tape as a static sample and the tip of a middle finger as a biological sample were measured by the OCT. The adhesive and the internal structure of the foam of the tape were successfully visualized in three dimensions. Sweat ducts was clearly observed in the OCT images at very high resolution. To the best of our knowledge, this is the first demonstration of ultra-high resolution visualization of sweat duct by OCT.