Charging of metal adatoms on ultrathin oxide films: Au and Pd on FeO/Pt(111)

We present a combined experimental (STM/scanning tunneling spectroscopy) and theoretical (density functional theory) study on the deposition of Au and Pd metal atoms on FeO/Pt(111) ultrathin films. We show that while the Pd atoms are only slightly oxidized, the Au atoms form positive ions upon deposition, at variance to a charge transfer into the Au atoms as observed for MgO/Ag(100). The modulation of the adsorption properties within the surface Moiré cell and the charging induce the formation a self-assembled array of gold adatoms on FeO/Pt(111), whereas Pd atoms are randomly distributed.     

Reconstructed (1 1 0) surfaces of FCC transition metals

The energies of the ideal, missing row (MR) and missing column (MC) (1 1 0) surfaces have been calculated by using modified embedded atom method (MEAM) for seven face centered cubic (FCC) transition metals Au, Pt, Ag, Pd, Rh, Cu and Ni. The results, that the MC reconstruction can not be formed for all metals, while the MR reconstruction can be formed naturally for Au and Pt, inductively for Ag, Pd, Rh and Cu and difficultly for Ni, are better than EAM calculated results in comparing with experimental results. In addition to the surface energy explanation, the results are also related to the surface topography and valence electron structure.     

Partial and complete reduction of O2 by hydrogen on transition metal surfaces

The metal-catalyzed reduction of di-oxygen (O₂) by hydrogen is at the heart of direct synthesis of hydrogen peroxide (HOOH) and power generation by proton exchange membrane fuel cells. Despite its apparent simplicity, how the reaction proceeds on different metals is not yet well understood. We present a systematic study of O₂ reduction on the (111) facets of eight transition metals (Rh, Ir, Ni, Pd, Pt, Cu, Ag, and Au) based on periodic density functional theory (DFT-GGA) calculations. Analysis of ten surface elementary reaction steps suggests three selectivity regimes as a function of the binding energy of atomic oxygen (BE_O), delineated by the opposite demands to catalyze O–O bond scission and O–H bond formation: The dissociative adsorption of O₂ prevails on Ni, Rh, Ir, and Cu; the complete reduction to water via associative (peroxyl, peroxide, and aquoxyl) mechanisms prevails on Pd, Pt, and Ag; and HOOH formation prevails on Au. The reducing power of hydrogen is decreased electrochemically by increasing the electrode potential. This hinders the hydrogenation of oxygen species and shifts the optimal selectivity for water to less reactive metals. Our results point to the important role of the intrinsic reactivity of metals in the selectivity of O2 reduction, provide a unified basis for understanding the metal-catalyzed reduction of O₂ to H₂O and HOOH, and offer useful insights for identifying new catalysts for desired oxygen reduction products.     

Preparation of platinum nanoparticles by sonochemical reduction of the Pt(IV) ions: role of surfactants

Sonochemical reduction processes of Pt(IV) ions in water have been investigated in the presence of various kinds of surfactants such as sodium dodecylsulfate (SDS) and sodium dodecylbenzenesulfonate (DBS) as anionic surfactants, and polyethylene glycol monostearate (PEG-MS) as non-ionic, dodecyltrimethylammonium chloride (DTAC) and bromide (DTAB) as cationic surfactants. An improved colorimetric determination reveals that Pt(IV) ion is reduced to zero valent metal in two steps: step (1)--Pt(IV) ion to Pt(II) ion, and step (2)--Pt(II) ion to Pt(0), and after the completion of step (1), step (2) sets in. It appears that rapid scrambling reactions among platinum ions and/or atoms, that is, Pt(I) + Pt(IV)-->Pt(II) + Pt(III), etc. take place. In the sonolysis of aqueous solutions of SDS, DBS or PEG-MS, two kinds of organic reducing radicals, R(ab) and R(py), are proposed to contribute to the reduction. Radical R(ab) is formed from the reaction of the surfactants with primary radicals such as hydroxyl radicals and hydrogen atoms originated from the sonolysis of water, and radical R(py) is formed from the direct thermal decomposition of surfactants in the interfacial region between the collapsing cavities and the bulk water. R(ab) is effective for both the reduction steps, whereas R(py) is involved only in the reduction step (1). This fact coincides with the previous reported sonochemical reduction of Pt(II) ions. Hydrogen atoms themselves scarcely participate in the reduction. The average diameter (1.0 nm) of platinum particles prepared from the system of PEG-MS is smaller than those from the aqueous solution of anionic surfactant SDS (3.0 nm) and DBS (3.0 nm).     

氧化铝负载二苯基硫脲分离富集ICP-AES测定贵金属的研究

报道了氧化铝负载二苯基硫脲分离富集ICP-AES法同时测定痕量Pt,Pd,Au和Rh的新方法,研究了影响分离富集的各种条件(溶液酸度、流速、试样体积、洗脱剂的种类和体积及其共存离子的影响等)对测定上述痕量元素回收率的影响。在优化的实验条件下本方法的检出限分别为Au 0.0085,Pd 0.022,Pt 0.015和Rh 0.022μg·g~(-1),相对标准偏差小于5.0％,样品加标回收率在95％～105％之间。本方法已成功地应用于地质样品中痕量Pt,Pd,Au和Rh的测定。     

Molecular dynamics simulation of the formation of metal nanocontacts

The process of the formation of nanocontacts has been studied by the molecular dynamics methods for a group of metals (Cu, Rh, Pd, Ag, Pt, Au). It has been shown that the disruption forces of nanocontacts substantially depend on the orientation ((100), (110), or (111)) of the contact-surface interface. The possibility of forming linear atomic chains as a result of the disruption of nanocontacts has been analyzed for different orientations of the electrode surfaces. The possibility of forming quasi-one-dimensional nanostructures from the Co/Au alloy, which represent a periodic alternation of gold atoms and cobalt trimers, has been predicted.     

Spectroscopic and electrochemical properties of dichlorobenzoquinoline complexes of Au(III), Pt(II), and Pd(II)

The dichloride complexes of Au(III), Pt(II), and Pd(II) with 2,2′-biquinoline are obtained and characterized by ¹H NMR spectroscopy, electronic spectroscopy, and cyclic voltammetry. It is shown that the low efficiency of the metal-ligand (2,2′-biquinoline) interaction leads to almost the same positions of the intraligand bands in the absorption and fluorescence spectra of the complexes and to the closeness of their reduction potentials.     

fcc金属层错能的EAM法计算

采用嵌入原子法(EAM)计算了Cu，Ag，Au，Ni，Al，Rh，Ir，Pd，Pt和Pb等10种面心立方(fcc)金属的层错能，除Rh和Ir两种金属外，其他金属的计算结果和实验结果基本一致. 关键词： 面心立方金属 层错能 EAM     

Nanosized metal deposits on titanium dioxide for augmenting gas-phase toluene photooxidation

The build-up of intermediate species on the surface of TiO₂ during gas-phase toluene (C₇H₈) photodegradation has been observed to deactivate the photocatalyst. Nanosized metallic deposits on the TiO₂ surface may enhance the photocatalytic process and improve photocatalyst performance. In this study, noble (Ag, Au) and platinum group (Pt, Pd, Rh) metals, at a nominal loading of 0.5 at.%, were deposited onto Degussa P25 TiO₂ to enhance photocatalyst performance and inhibit deactivation. Pd, Rh and Au deposits delayed photocatalyst deactivation by a factor of 2, while Pt deposits delayed photocatalyst deactivation by a factor of 20, when compared with neat TiO₂. Ag deposits did not improve photocatalyst activity. Metal deposit performance was related to the work function of each metal, however, the Pt finding suggested that these effects are not governed solely by this aspect, but factors such as deposit characteristics and/or thermal catalytic properties of the metals may be influential.     

Atomistic modeling of ternary additions to NiTi and quaternary additions to Ni–Ti–Pd,Ni–Ti–Pt and Ni–Ti–Hf shape memory alloys

The behavior of ternary and quaternary additions to NiTi shape memory alloys is investigated using a quantum approximate method for the energetics. Ternary additions X to NiTi and quaternary additions to Ni–Ti–Pd, Ni–Ti–Pt, and Ni–Ti–Hf alloys, for X=Au, Pt, Ir, Os, Re, W, Ta,Ag, Pd, Rh, Ru, Tc, Mo, Nb, Zr, Zn, Cu, Co, Fe, Mn, V, Sc, Si, Al and Mg are considered. Bulk properties such as lattice parameter, energy of formation, and bulk modulus of the B2 alloys are studied for variations due to the presence of one or two simultaneous additives.