Al的微观组态与LaNi3.75Al1.25的结构和弹性第一性原理研究

在全电子水平上,采用广义梯度近似密度泛函理论和全势能线性缀加平面波方法并结合二维立方拟合方法,对LaNi3.75Al1.25合金的晶体结构与弹性性质进行了理论研究.计算结果给出合金的晶格常数a=b=0.5137 nm,c=0.4018 nm,Al原子在晶胞中的微观分布为同时占据部分3g和2c等价格位,弹性常数C11+C12=281.2,C13=82.3,C33=227.3,以及体弹性模量B＝124.5、切变模量G＝68.2 GPa.还对态密度、能带结构和电荷密度进行了计算分析,并给出材料LaNi3.75Al1.25的电子线性比热系数23.45 mJ/molK2.     

立方结构Fe基磁性材料弹性系数第一性原理计算

通过赝势平面波法(CASTEP)及全电势线性缀加平面波法(FLAPW)，以bcc-Fe为对象，研究第一性原理计算立方结构Fe基磁性材料弹性系数的方法，分析影响计算立方结构Fe基磁性材料弹性系数准确度的各项因素. 结果表明，在第一性原理弹性系数计算中，晶格常数是决定弹性系数计算准确度的关键因素；势函数的选择也会影响计算准确度. 使用全电势基矢的FLAPW法可以得到更为精准的弹性系数计算结果. 计算得到bcc-Fe的弹性系数C₁₁，C₁₂，C₄₄分别为246 GPa，121 GPa，113 GPa，与实验值基本一致. 利用本方法，计算了新型Fe-Ga磁致伸缩材料的弹性系数C₁₁，C₁₂，C₄₄分别为207 GPa，166 GPa及108 GPa. 关键词： 弹性系数 磁致伸缩材料 赝势平面波法 全电势线性缀加平面波法     

氦对LaNi5晶体结构的影响及其扩散特性研究

从密度泛函理论为基础的第一性原理出发,运用全势能线性缀加平面波(FLAPW)方法,对氚衰变后氦在合金中的占位以及LaNi₅He晶体结构进行了理论计算,并系统给出了氦在间隙间的迁移曲线.结果表明,氦原子在十二面体(1b)格位最稳定,并且氦从6m格位向1b格位迁移不存在势垒,而从2d格位向1b格位迁移则需越过1.55eV高的势垒.另外,氦从12n格位穿过12o格位最后到达6m格位也无明显势垒存在,并且处于4h格位之间的氦原子可以自由迁移,而相应12n格位之间的直接迁移则需跨越13.6eV高的势垒.最后还计算给出了氚衰变后合金的态密度、电子密度以及势能分布图,并与相应的LaNi₅H结构作了详细比较. 关键词： 全势能线性缀加平面波(FLAPW) 5He')" href="#">LaNi₅He 态密度 扩散     

L12型铝合金的结构、弹性和电子性质的第一性原理研究

运用第一性原理方法研究了L1₂型铝合金相Al₃Sc和Al₃Zr的晶体结构、电子结构和弹性.结合能和形成能的计算表明,两种合金具有较强的合金化能力,且Al₃Zr较Al₃Sc具有更强的结构稳定性.电子结构分析表明,费米能级以下较多的价电子数决定了Al₃Zr具有较强的结构稳定性.计算并分析比较了两种合金相的单晶弹性常数（C₁₁,C₁₂和C₄₄）以及多晶弹性模量（体弹性模量B、剪切模量G、杨氏模量Y、泊松比ν和各向异性因子A）.通过对比实验和其他理论计算结果,进一步分析和解释了两种合金相的力学性质. 关键词： 铝合金 第一性原理 结构和电子性质 弹性     

N2O异构体结构与解析势能函数

在B3P86/cc-PVTZ水平上,对N₂O异构体进行优化计算,得出N₂O基态的单重态能量最低,其稳定构型为C_∞v构型,平衡核间距R₁=0.1121nm,R₂=0.1177nm,α＝180°,能量为-185.1188a.u.同时计算出基态的简正振动频率ω₁(Π)=601.5010 cm^{关键词： 异构体 多体项展式理论 解析势能函数}     

压力及杂质氢对金属锂弹性特性的影响

针对六角密堆金属锂16个原子超晶胞(supercell)、填隙一个氢原子的周期单元，采用基于密度泛函理论的平面波-赝势方法，研究了零温条件下压力及填隙氢掺杂对体系弹性性质的影响.结果表明氢掺杂导致体系的体模量增加.常压下掺杂体系的弹性常数C₁₁，C₃₃，C₆₆和C₁₂高于单质体系，剪切模量C₄₄有所下降，而C₁₃则与单质体系持平.压力作用下C₁₁，C₃₃和C₆₆一直大于单质体系，但C₁₂的值低于单质体系.在2GPa—4GPa压力区间内，弹性常数C₁₃呈反常变化，小于单质体系；在高压区掺杂体系的C₄₄和C₁₃则高于单质体系的相应量值，压力导致掺杂体系和单质体系之间剪切模的偏离加剧.掺杂体系在压力作用下依然保持压缩模的各向同性，具有和单质体系相似的特性. 关键词： 第一性原理 压力效应 弹性常数 金属锂     

ReSi1.75电子结构的第一性原理研究

基于第一性原理全势线性缀加平面波方法和局域密度近似(LDA)，对ReSi_1.75的基态晶格属性进行了研究. 结构优化的结果表明，ReSi_1.75的基态平衡晶格常数比实验值小约0.6%. 在LDA计算基础上，考虑局域的Re的d电子库仑作用，用LDA+U方法计算了ReSi_1.75的电子结构，发现当U_eff=U-J=4.4eV时，能带结构呈半导体性质. 具有0.12eV 关键词： 1.75')" href="#">ReSi_1.75 局域密度近似 自相互修正作用 电子结构     

BiTiO3电子结构及光学性质的第一性原理研究

采用基于第一性原理的赝势平面波方法, 对BiTiO₃的多种结构进行了计算. 计算结果表明, C1C1结构最为稳定, 对应晶格参数为a=b=5.606 Å, c=9.954 Å; α=β=105.1°, γ=61.2°. 进一步对C1C1结构的BiTiO₃的能带结构、电子性质和光学性质进行了研究, 发现BiTiO₃是间接带隙半导体, 其费米面附近的能带主要由Ti-3d和O-2p层的电子态构成. 通过介电函数、复折射率和反射率等的研究, 发现BiTiO₃的光学性质为近各向同性.     

第一性原理计算MgB2薄膜拉伸对超导电性的影响

应用全势线性响应线性糕模轨道方法计算MgB₂的电子能带结构、声子谱及电声子耦合常数,并讨论MgB₂的超导电性.通过比较MgB₂薄膜双轴拉伸前后超导电性的变化可以看出，随着a轴晶格常数增大和c轴晶格常数减小,声子谱中硼的E_2g声子频率显著下降，使得电声子耦合强度λ和声子对数平均频率ω_ln增强,提高了MgB₂薄 关键词： 超导电性 能带结构 声子频率 电声子耦合     

关于Zn1-xBexO电子结构和光学性质的研究

采用基于密度泛函理论和平面波赝势技术的CASTEP程序对Zn_1-xBe_xO合金电子结构和光学性质进行了计算.当0≤x≤1,其带隙从0.963 eV变化到7.293 eV.分析了晶格畸变和能带间排斥效应对带隙的影响.当Be含量x=0.125,0.25,0.375,0.5,0.625,0.75时,a/b轴压应变控制着带隙变化;当x=0.875,1时,c轴压应变控制着带隙变化.能带间的p-d排斥影响价带顶变动,Γ_1v与Γ_1c之间排斥影响导带底变动.这些能带间的排斥效应被用来分析Zn_1-xBe_xO带隙变动.另外,也分析了Zn_1-xBe_xO介电函数虚部ε₂. 关键词： 带结构 光学性质 应变 排斥     

First-principles calculations for the elastic properties of Ni-base model superalloys: Ni/Ni3Al multilayers

A model system consisting of Ni[001](100)/Ni3Al[001](100) multi-layers are studied using the density functional theory in order to explore the elastic properties of single crystal Ni-based superalloys. Simulation results are consistent with the experimental observation that rafted Ni-base superalloys virtually possess a cubic symmetry. The convergence of the elastic properties with respect to the thickness of the multilayers are tested by a series of multilayers from 2γ′+2γ to 10γ′+10γ atomic layers. The elastic properties are found to vary little with the increase of the multilayer’s thickness. A Ni/Ni3Al multilayer with 10γ′+10γ atomic layers (3.54 nm) can be used to simulate the mechanical properties of Ni-base model superalloys. Our calculated elastic constants, bulk modulus, orientation-dependent shear modulus and Young’s modulus, as well as the Zener anisotropy factor are all compatible with the measured results of Ni-base model superalloys R1 and the advanced commercial superalloys TMS-26, CMSX-4 at a low temperature. The mechanical properties as a function of the γ′ phase volume fraction are calculated by varying the proportion of the γ and γ′ phase in the multilayers. Besides, the mechanical properties of two-phase Ni/Ni3Al multilayer can be well predicted by the Voigt-Reuss-Hill rule of mixtures.     

Spontaneous magnetostriction of Y2Fe16Al compound

The structure and magnetic properties of Y₂Fe₁₆Al compound have been investigated by means of x-ray diffraction and magnetization measurements. The Y₂Fe Fe₁₆Al compound has a hexagonal Th$_{2}$Ni$_{17}$-type structure. Negative thermal expansion was found in Y₂Fe₁₆Al compound in the temperature range from 332 to 438K by x-ray dilatometry. The coefficient of the average thermal expansion is \alpha =-3.4\times 10^-5K^-1. The spontaneous magnetostrictive deformations from 293 to 427K have been calculated based on the differences between the experimental values of the lattice parameters and the corresponding values extrapolated from the paramagnetic range. The result shows that the spontaneous volume magnetostrictive deformation \textit{$\omega $}$_{\rm S}$ decreases from 5.4$\times $10^-3to near zero with temperature increasing from 293 to 427K, the spontaneous linear magnetostrictive deformation \textit{$\lambda $}$_{\rm c}$ along the $c$ axis is much larger than the spontaneous linear magnetostrictive deformation \textit{$\lambda $}$_{\rm a}$ in basal-plane in the same temperature range except near 427K.     

Structural, elastic, electronic and optical properties of a new layered-ternary Ta4SiC3 compound

We propose a new layered-ternary Ta₄SiC₃ with two different stacking sequences (α- and β-phases) of the metal atoms along c axis and study their structural stability. The mechanical, electronic and optical properties are then calculated and compared with those of other compounds M₄AX₃ (M=V, Nb, Ta; A=Al, Si and X=C). The predicted compound in the α-phase is found to possess higher bulk modulus than these compounds. The independent elastic constants of the two phases are also evaluated and the results discussed. The electronic band structures for α- and β-Ta₄SiC₃ show metallic conductivity. Ta 5d electrons are mainly contributing to the total density of states (DOS). We see that the hybridization peak of Ta 5d and C 2p lies lower in energy and the Ta 5d-C 2p bond is stronger than Ta 5d-Si 3p bond. Further an analysis of the different optical properties shows the compound to possess improved behavior compared to similar types of compounds.     

First-principles study of the structural, elastic, electronic, optical, and vibrational properties of intermetallic Pd2Ga

The structural, elastic, electronic, optical, and vibrational properties of the orthorhombic Pd₂Ga compound are investigated using the norm-conserving pseudopotentials within the local density approximation in the frame of density functional theory. The calculated lattice parameters have been compared with the experimental values and found to be in good agreement with these results. The second-order elastic constants and the other relevant quantities, such as the Young's modulus, shear modulus, Poisson's ratio, anisotropy factor, sound velocity, and Debye temperature, have been calculated. It is shown that this compound is mechanically stable after analysing the calculated elastic constants. Furthermore, the real and imaginary parts of the dielectric function and the optical constants, such as the optical dielectric constant and the effective number of electrons per unit cell, are calculated and presented. The phonon dispersion curves are derived using the direct method. The present results demonstrate that this compound is dynamically stable.     

TiN/SiO2纳米多层膜的晶体生长与超硬效应

高硬度的含氧化物纳米多层膜在工具涂层上具有重要的应用价值.研究了TiN/SiO2_{2纳米多 层膜的晶体生长特征和超硬效应.一系列具有不同SiO22和TiN调制层厚的纳米多 层膜采用多 靶磁控溅射法制备；采用x射线衍射、x射线能量色散谱、高分辨电子显微镜和微力学探针表 征了多层膜的微结构和力学性能.结果表明，虽然以单层膜形式存在的TiN和SiO22分别形成 纳米晶和非晶结构，它们组成多层膜时会因晶体生长的互促效应而呈现共格外延生长的结构 特 关键词： 2纳米多层膜')" href="#">TiN/SiO22纳米多层膜 外延生长 非晶晶化 超硬效应}     

First-principles study of electronic structure and elasticity of UAlx (x=1,2,3) system

A detailed theoretical study of structural, electronic, and elastic properties of cubic UAl_x (x=1,2,3) is presented employing the pseudopotential plane-wave method based on density-functional theory. The structure parameters of these three compounds have been calculated within generalized gradient approximation (GGA) and local density approximation (LDA). The calculated results were compared with the experimental data and previous research. With the GGA approximation, the elastic constants, shear modulus, Young's modulus, and Poisson's ratio of UAl_x (x=1,2,3) are derived. According to the generalized mechanical stability criteria for cubic crystals, our calculation suggested that C15 UAl₂ and L12 UAl₃ are stable substance under hydrostatic pressures, but B2 UAl might be expected as a metastable compound, which is not reported in previous literature, and future experimental confirmation is needed. Furthermore, the calculated energy band structure and density of state (DOS) are found to be in good agreement with the theoretical values. Additionally, the charge density of these compounds have also been worked out and analyzed.     

Elastic constants and thermodynamic properties of Mg2SixSn1-x from first-principles calculations

<正>This paper stuides the elastic constants and some thermodynamic properties of Mg₂Si_xSn_n-1（x=0,0.25,0.5, 0.75,1） compounds by first-principles total energy calculations using the pseudo-potential plane-waves approach based on density functional theory,within the generalized gradient approximation for the exchange and correlation potential. The elastic constants of Mg₂Si_xSn_n-1 were calculated.It shows that,at 273 K,the elastic constants of Mg₂Si and Mg₂Sn are well consistent with previous experimental data.The isotropy decreases with increasing Sn content.The dependences of the elastic constants,the bulk modulus,the shear modulus and the Debye temperatures of Mg₂Si and Mg₂Si_0.5Sn_0.5 on pressure were discussed.Through the quasi-harmonic Debye model,in which phononic effects were considered,the specific heat capacities of Mg₂Si_xSn_1-x at constant volume and constant pressure were calculated.The calculated specific heat capacities are well consistent with the previous experimental data.     

Structural and elastic properties of LaTiO3 under pressure

We investigate the structural and elastic properties of LaTiO₃ by the plane-wave pseudopotential density functional theory method. The lattice constants, bulk modulus and its pressure derivative are obtained. These properties in the equilibrium phase are well consistent with the available experimental data. The pressure dependence of the elastic constants, ductility, mechanical stabilities, sound velocity and Debye temperatures are investigated for the first time. From the ratio G/B, we conclude that LaTiO₃ is ductile at 0 GPa and becomes more ductile at high pressure. In addition, the anisotropy factors for every symmetry plane and axis as well as linear bulk modulus at diverse pressures have been obtained.     

Elastic, electronic, and optical properties of hypothetical SnNNi3 and CuNNi3 in comparison with superconducting ZnNNi3

The elastic, electronic, and optical properties of MNNi₃ (M=Zn, Sn, and Cu) have been calculated using the plane-wave ultrasoft pseudopotential technique, which is based on the first-principle density functional theory (DFT) with generalized gradient approximation (GGA). The optimized lattice parameters, independent elastic constants (C₁₁, C₁₂, and C₄₄), bulk modulus B, compressibility K, shear modulus G, and Poisson's ratio υ, as well as the band structures, total and atom projected densities of states and finally the optical properties of MNNi₃ have been evaluated and discussed. The electronic band structures of the two hypothetical compounds show metallic behavior just like the superconducting ZnNNi₃. Using band structures, the origin of features that appear in different optical properties of all the three compounds has been discussed. The large reflectivity of the predicted compounds in the low energy region might be useful in good candidate materials for coating to avoid solar heating.     

First-principles study of elastic and thermo-physical properties of kesterite-type Cu2ZnSnS4

The lattice constants and elastic constants of the kesterite-type Cu₂ZnSnS₄ have been calculated using density-functional theory (DFT). The calculated lattice constants are in good agreement with the experimental data. The calculated elastic constants indicate that the bonding strength along the [1 0 0] and [0 1 0] directions is as strong as the one along the [0 0 1] direction. The high B/G ratio shows that the kesterite-type Cu₂ZnSnS₄ compound has ductile behavior. Finally, using the Debye model, the volume, bulk modulus and heat capacity as a function of temperature for the kesterite-type CZTS have been estimated at different pressures. The Debye temperature and Gruneisen parameter are 157 K and 2.28 at 300 K temperature, respectively. The present results can give some information for the design of the kesterite-type CZTS compounds, and these can also be used to stimulate future experimental and theoretical work.