CdSe量子点的光物理性质研究与荧光杂化纤维的制备（英文）

半导体纳米晶体(NCs)具有良好的光稳定性,广泛的发射持久性和高消光系数,在过去几年被广泛研究报道,其中,硒化镉半导体纳米晶体(CdSe NCs)被广泛用于电子照明、太阳能发电、光电传感等领域。然而CdSe NCs的电学、热力学和光物理性质具有较强的尺寸依赖性,在传统的制备方法及应用中容易出现晶体表面缺陷和悬空键以及较为严重的生物毒性和环境毒性。为了实现量子点在各个领域的应用,必须严格控制CdSe NCs的发光波长,尺寸分布以及荧光性能。本研究通过高温热注射法合成了单分散的胶体发光CdSe NCs,使用表面配体对CdSe NCs进行修饰,研究了不同烷基链长度的配体对CdSe NCs尺寸分布和荧光性能的影响,并通过改变溶剂配比制备了纺丝溶液,将其与聚乙烯吡咯烷酮(PVP)进行杂化,制备了PVP/CdSe QDs荧光杂化纤维。结果表明,与传统CdSe NCs相比,经表面配体的修饰的CdSe NCs在有机溶液中因分子间吸附的降低在溶液中有良好的稳定性,具有可调节的溶解度,弥补了缺陷和悬空键造成的荧光性能下降。在CdSe晶体结构的形成过程中,表面配体也有着显著的调控作用。并且更为重要的是,该研究将表面配体修饰与杂化相结合,改善了表面配体的附着,在杂化材料的制备过程中避免了硒化镉纳米晶体与高分子基体直接接触,为荧光团提供了良好的发光微环境,保证了CdSe NCs的荧光性能,使杂化纤维具有良好而稳定的荧光性能。同时, PVP的引入使CdSe NCs的生物毒性和环境毒性得以改善,使材料更加环境友好且具有更好的生物相容性,大大提升了材料的应用范围。事实证明, PVP/CdSe QDs杂化微纤维杂化相容性和分散性良好,具有优异的荧光性能和材料成型性,纤维合成方式简便易行且造价低廉,可应用于溶液处理,光学照明,电极材料,和生物成像等各个领域。     

PbS纳米晶修饰的ZnO/PVP复合电双稳器件阻变机制

采用简单旋涂工艺制备了具有ITO/PVP/ZnO NCs/PbS NCs/PVP/Al 夹心结构的有机/无机复合电双稳存储器件,与没有PbS纳米晶修饰层的器件ITO/PVP/ZnO NCs/PVP/Al相比,PbS纳米晶的引入使目标器件的开关比提高了2个数量级。结合器件的I-V曲线和能级结构分析了PbS 纳米晶修饰层对器件阻变和载流子传输的影响。结果显示,PbS纳米晶层的加入不仅优化了器件能级结构,有利于载流子的俘获和释放,还修饰了ZnO纳米晶的表面缺陷,降低了器件载流子的复合损耗。     

不同表面结构的金纳米粒子荧光性质.

"研究了具有不同表面结构的金纳米粒子：裸金纳米粒子、三苯基膦修饰的金纳米粒子、巯基丙酸表面取代的金纳米粒子的荧光性质,及其对CdSe纳米粒子的荧光猝灭作用．发现不同的金纳米粒子荧光信号受粒子表面一价金离子与配体分子之间相互作用的影响,其荧光强度对其表面分子具有强烈的敏感性;具有不同表面结构的金纳米粒子对CdSe纳米粒子的荧光猝灭作用不同,与其吸收光谱和CdSe纳米粒子发射光谱的重叠程度相关."     

ZnS薄膜参数对有机/无机复合发光器件特性的影响

半导体量子点(QDs)具有发光效率高和发光波长可调等特点。采用胶体CdSe QDs作电致发光器件的有源材料,TPD(N,N′-biphenyl-N,N′-bis-(3-methylphenyl)-1,1′-biphenyl-4,4′-diamine)作空穴传输层,ZnS作电子传输层,研究了有机/无机复合发光器件ITO/TPD/CdSe QDs/ZnS/Ag的电致发光特性。TPD和CdSe QDs薄膜采用旋涂方法、ZnS薄膜采用磁控溅射方法沉积,器件表面平整。CdSe QDs的光致发光和电致发光谱峰位波长均位于～580 nm,属于量子点的带边激子发光。我们与以前的ITO/ZnS/CdSe QDs/ZnS/Ag发光器件结构进行了对比,发现新的器件结构的电致发光谱没有观察到QDs表面态的发光,而且新器件的发光强度是ITO/ZnS/CdSe QDs/ZnS/Ag结构的～10倍。发光效率的提高归因于碰撞激发与载流子注入两种发光机制并存的结果：一方面电子经过ZnS 层加速后,碰撞激发CdSe QDs发光;另一方面,空穴从TPD层注入CdSe QDs 与QDs中激发的电子复合发光。我们进一步研究了ZnS电子加速层厚度对发光特性的影响,选择ZnS薄膜的厚度分别是80,120 和160 nm,发现随着ZnS层厚度增大,器件启亮电压升高,EL强度增大,但是击穿电压降低。EL峰位随着ZnS厚度的减小发生明显蓝移,对上述实验现象进行了机理解释。     

复合荧光CdSe量子点-脂质体的制备与表征

通过脂质体方法成功地将三辛基氧化膦(TOPO)包覆的CdSe发光量子点从非极性有机溶剂转移到生物相容性的水溶液中.分别通过透射电镜(TEM)、荧光Mapping图像,以及光致发光(PL)光谱进行表征.TEM照片显示制备的CdSe核量子点为球形,具有良好的单分散特性,平均粒径约为3nm.CdSe-脂质体复合体的平均尺寸大约20nm,TEM清楚地显示了CdSe量子点被诱捕在脂质体中.荧光Mapping显示了CdSe-脂质体复合体的发光强度分布.脂质体方法转移TOPO包覆的CdSe量子点,借助了磷脂的双分子链与CdSe表面的TOPO配体之间的疏水相互作用,在CdSe的第一配体层外部形成第二配体层,保留了CdSe的存在环境,光致发光光谱表明,量子点-脂质复合体基本保持了CdSe核量子点的发射效率.     

CdSe/ZnSe核-壳结构纳米粒子合成新方法

报道用“一步”合成新方法制备了CdSe/ZnSe核-壳结构的发光纳米粒子.该方法是将锌的前驱体注入表面Se富集的CdSe发光纳米粒子溶液中,通过Zn²⁺与Se共价键结合,从而在CdSe发光纳米粒子的表面形成ZnSe壳.分别通过X射线粉末衍射、光电子能谱、透射电镜、紫外-可见吸收光谱和光致发光光谱,对核-壳结构的发光纳米粒子的结构及光学性质进行了表征.结果表明,以较宽带隙的ZnSe在较窄带隙的CdSe纳米粒子表面形成的壳层有效地钝化了CdSe纳米粒子的表面缺陷,明显地提高了室温下CdSe纳米粒子的光致发光效率.X射线粉末衍射表明随着Zn²⁺的不断注入,CdSe/ZnSe的衍射峰逐渐移向ZnSe衍射峰.光电子能谱数据显示,Zn2p的双峰分别位于1020,1040eV附近,通过与体材料ZnO相比,确定为Zn²⁺的光电子发射,说明Zn是以共价键形式存在于CdSe纳米粒子的表面.透射电镜照片显示纳米粒子具有良好的单分散性,核-壳结构的发光纳米粒子直径较CdSe核的直径明显增加.     

PVP/洛美沙星-铽纳米粒子微波合成及其荧光特性研究

以PVP为表面修饰剂,用微波合成法制备了粒径分布均匀性能稳定的洛美沙星-铽(LELX-Tb3 )纳米粒子,用扫描电镜、红外光谱和荧光光谱进行了表征.重点分析了PVP的引入对洛美沙星-铽纳米粒子的粒径分布、粒子形貌、红外光谱和荧光光谱的影响,发现PVP修饰后的洛美沙星-铽纳米粒子具有更均匀的尺寸分布,荧光发射峰强度增强;确证了PVP的用量是制备洛美沙星-铽纳米粒子的一个重要因素;探讨了PVP对LFLX-Tb3 荧光的增敏机理.     

聚合物PVP表面修饰CdS纳米棒的制备及其光谱特性

用水热合成方法制备了PVP表面修饰CdS纳米棒,用XRD,TEM,TG-DTA,IR,UV-Vis,PL等光谱技术进行了表征。与未修饰的CdS纳米棒相比,PVP修饰后的CdS纳米棒具有更均匀的尺寸分布,吸收光谱具有结构峰特征,其荧光发射谱增强。     

聚乙烯吡咯烷酮修饰的NaYF4∶Yb3+/Er3+上转换 发光纳米粒子的制备及其生物兼容性

以聚乙烯吡咯烷酮(PVP)为表面活性剂,利用溶剂热法合成了NaYF₄∶20%Yb³⁺, 3%Er³⁺(摩尔分数)的上转换发光纳米粒子。利用扫描电子显微镜对粒子的形貌进行了表征,结果表明纳米颗粒的尺寸在30~40 nm,分布比较均匀。在980 nm红外光的激发下,样品能够发出肉眼可见的明亮的黄色上转换荧光。样品可以较好地分散在水溶液中形成透明澄清的溶液。利用MTT实验测量了不同给药浓度下NaYF₄纳米粒子是否对HeLa细胞具有生物毒性。结果表明:PVP修饰的NaYF₄∶Yb³⁺/Er³⁺上转换发光纳米粒子具有较好的生物兼容性,对HeLa细胞无生物毒性,在生物荧光标记领域具有潜在的应用价值。     

ZnS：Mn/SiO2量子点的表面聚乙烯吡咯烷酮修饰及其应用于海水中铅离子检测

制备了二氧化硅壳层修饰的ZnS：Mn量子点,基于聚乙烯吡咯烷酮（PVP）与二氧化硅表面硅羟基的作用,在纳米复合微粒表面进行了PVP的修饰,得到了在海水中荧光性能及胶体稳定性良好的ZnS：Mn/SiO₂/PVP 量子点。在Pb²⁺对所制备纳米微粒具有荧光猝灭效应的基础上,建立了用ZnS：Mn/SiO₂/PVP 量子点作为荧光探针检测海水中微量铅离子的新方法。研究表明,量子点浓度为10^-3 mol/L时,海水中离子浓度在10~100 μmol/L范围内与ZnS：Mn/SiO₂/PVP量子点荧光猝灭强度呈良好的线性关系,相关系数为0.994 6,检出限为8×10^-7 mol/L。     

CdSe/ZnSe/ZnS多壳层结构量子点的制备与表征

展示了一种简捷的多壳层量子点合成路线。在含有过量Se源的CdSe体系中直接注入Zn源,"一步法"合成了CdSe/ZnSe量子点;进一步以CdSe/ZnSe为"核",表面外延生长ZnS壳层制备了核/壳/壳结构CdSe/ZnSe/ZnS量子点。相对于以往报道的多壳层结构量子点的制备方法,该方法通过减少壳层的生长步骤有效地简化了实验操作,缩短了实验周期,同时减少对原料的损耗。对量子点进行高温退火处理,能够大幅提高CdSe/ZnSe/ZnS量子点的发光量子产率。透射电镜、XRD以及光谱研究表明:所制备的量子点接近球形,核与壳层纳米晶均为闪锌矿结构,最终获得的CdSe/ZnSe/ZnS量子点的光致发光量子产率达到53％。为了实现量子点的表面生物功能化,通过巯基酸进行了表面配体交换修饰,使量子点表面具有水溶性的羧基功能团,并且能够维持较高的光致发光量子产率。     

Electrostatic assembles and optical properties of Au–CdTe QDs and Ag/Au–CdTe QDs

Au–CdTe and Ag/Au–CdTe assembles were firstly investigated through the static interaction between positively charged cysteamine-stabilized CdTe quantum dots (QDs) and negatively charged Au or core/shell Ag/Au nano-particles (NCs). The CdTe QDs synthesized in aqueous solution were capped with cysteamine which endowed them positive charges on the surface. Both Au and Ag/Au NCs were prepared through reducing precursors with gallic acid obtained from the hydrolysis of natural plant poly-phenols and favored negative charges on the surface of NCs. The fluorescence spectra of CdTe QDs exhibited strong quenching with the increase of added Au or Ag/Au NCs. Railey resonance scattering spectra of Au or Ag/Au NCs increased firstly and decreased latter with the concentration of CdTe QDs, accompanied with the solution color changing from red to purple and colorless at last. Experimental results on the effects of gallic acid, chloroauric acid tetrahydrate and other reagents demonstrated the static interaction occurred between QDs and NCs. This finding reveals the possibilities to design and control optical process and electromagnetic coupling in hybrid structures.     

胶体CdSe量子点的色度学特性研究

使用化学胶体法合成了CdSe量子点，研究了样品的荧光量子产率，发现随CdSe量子点粒径的增大，荧光量子产率存在先增大后减小的现象.研究了CdSe量子点的色度学特性，通过对不同尺寸、不同粒径分布范围的CdSe量子点色度坐标的计算，讨论了粒径分布范围对其荧光颜色饱和度的影响，解释了为何难以获得高颜色饱和度的绿光量子点.利用红、蓝两种不同尺寸的量子点配制出白光样品，提出了估计配色后样品色度坐标的经验公式，结果显示白光样品色度坐标的实验值与经验公式估计值基本一致.     

Synthesis and characterization of water-soluble, stable and highly luminescent itaconic acid/methacrylic acid copolymer-coated CdSe/CdS quantum dots

The itaconic acid/methacrylic acid (PIA-MAA) copolymer ligand (PIA-MAA) with carboxylate anchoring groups was found to efficiently convert CdSe/CdS core-shell quantum dots (QDs) in chloroform to water-soluble PIA-MAA-ligand stabilized nanocrystals (PIA-MAA-QDs). The quantum yield (QY) of the resulting PIA-MAA-QDs was 24%. In addition, the carboxylate-based PIA-MAA-QDs survived UV irradiation in air for at least 16 days. Upon UV irradiation, the PIA-MAA-QDs became about 2 times brighter than the original CdSe/CdS QDs in chloroform, and the UV-brightened photoluminescence (PL) can retain the brightness for at least several months. Experimental results further confirmed that the PIA-MAA-QDs were more stable than the original CdSe/CdS QDs against strong acid, strong oxidant, photochemical and thermal treatments. The PIA-MAA-QDs were soluble and stable in water, some polar solvents and buffer solutions. In addition to good performance of PIA-MAA-QDs, the synthesis of PIA-MAA ligands and the corresponding water-soluble QDs is relatively simple.     

Complex formation of CdSe/ZnS/TOPO nanocrystal vs. molecular chaperone in aqueous solution by hydrophobic interaction

Feasibilities to stabilize CdSe/ZnS/trioctylphosphineoxide (TOPO) nanocrystals (quantum dots, QDs) in aqueous solutions with prefoldin macromolecules in their bioactive states are reported. Prefoldin is a jellyfish-shaped hexameric co-chaperone of the group II chaperonins. As a protein folding intermediate is captured within its central cavity, so CdSe/ZnS/TOPO QDs would also be included within this cavity. It is also found the QDs can be much more dispersed in aqueous solutions and suspended for certain period of time by adding trace amount of t-butanol in the buffer prior to the mixing of the QDs mother solution. While biochemical procedures are evaluated with ordinary fluorescence measurements, possible complex formations are also evaluated with TIRFM single-molecule detection techniques.     

The Influence of Surface Trapping and Dark States on the Fluorescence Emission Efficiency and Lifetime of CdSe and CdSe/ZnS Quantum Dots

To investigate the influence of surface trapping and dark states on CdSe and CdSe/ZnS quantum dots (QDs), we studied the absorption, fluorescence intensity and lifetime by using one-and two-photon excitation, respectively. Experimental results show that both one- and two-photon fluorescence emission efficiencies of the QDs enhance greatly and the lifetime increase after capping CdSe with ZnS due to the effective surface passivation. The lifetime of one-photon fluorescence of CdSe and CdSe/ZnS QDs increase with increasing emission wavelength in a supralinear way, which is attributed to the energy transfer of dark excitons. On the contrary, the lifetime of two-photon fluorescence of bare and core-shell QDs decrease with increasing emission wavelength, and this indicates that the surface trapping is the dominant decay mechanism in this case.     

Chemical role of amines in the colloidal synthesis of CdSe quantum dots and their luminescence properties

The role of organic amines in the colloidal synthesis of CdSe quantum dots (QDs) has been studied. CdSe QDs were synthesized from the source solutions containing 5 vol% of amines having various alkyl chain lengths, stereochemical sizes and electron donation abilities. The role of the additional amines was evaluated on the basis of the photoluminescence (PL) properties such as PL wavelength and intensity of the obtained CdSe QDs. The observed PL spectra were explained by the fact that the amines behaved as capping ligands on the surface of the QDs in the product colloidal solution and complex ligands for cadmium in the source solutions. It was shown that the particle size was controlled by the diffusion process depending on the mass and stereochemical shape of the amines, and the luminescence intensity increased with the increasing electron donation ability and capping density of the amines.     

Photoluminescence of colloidal CdSe nano-tetrapods and quantum dots in oxygenic and oxygen-free environments

The effects of oxygenic versus oxygen-free environments on colloidal CdSe nano-tetrapods and quantum dots (QDs) were studied using both continuous and time-resolved photoluminescence (PL) measurements. The decays of PL intensities for tetrapods and QDs in oxygen-free solution (chloroform) and in air (on silicon) can be well fitted by a bi-exponential function. Based on the emission-energy dependence of carrier lifetimes and the amplitude ratio of the fast-decay component to the slow-decay component, the fast and slow PL decays of CdSe nanocrystals are attributed to the recombination of delocalized carriers in the core states and localized carriers in the surface states, respectively. The PL intensities of CdSe nano-tetrapods and QDs were found to be five times and an order of magnitude higher in air than in vacuum, respectively, which is explained by the passivation of surface defects by the polar gas (oxygen) absorption. The lower enhancement in PL intensities of CdSe nano-tetrapods is explained by the special morphology of the tetrapods.     

Synthesis of quantum dots via microreaction: structure optimization for microreactor system

Microreactor systems existed as a powerful tool for the continuous synthesis of quantum dots. However, the lack of structure optimization for the discrete units led to empirical determination of the length scale, and the properties of the formed products varied in different cases. In this article, the optimizations for the micromixer volume and capillary diameter were presented based on the synthesis of CdSe nanocrystals (NCs). Spectra investigation revealed that the application of a small convective mixer of 36 μL led to 1/3 increase of CdSe concentration in the crude solution. The enhanced mixing of the precursors in this case was also demonstrated favorable to achieve CdSe NCs with narrow PL width. Fast heating and uniform reaction condition achieved in a narrow channel favored the preparation of high quality CdSe NCs under short residence time. However, the application of wide channel did not necessarily result in CdSe NCs with poor quality. Here, we demonstrated that high-quality CdSe NCs with narrow full width at half maximum (FWHM) as 32 nm and high quantum yield (QY) 34.7% could be prepared using an 844 μm inner diameter capillary. Based on the obtained results, the scaled-up synthesis of CdSe NCs was demonstrated, and a high quantity of 0.8 g dry CdSe NCs powder (3.5 nm, σ ~ 8.2%) was obtained within 1 h.