Magneto-optic fiber Sagnac modulator based on magnetic fluids

A magneto-optic modulator with a magnetic fluid film inserted into an optical fiber Sagnac interferometer is proposed. The magnetic fluid exhibits variable birefringence and Faraday effect under external magnetic field that will lead to a phase difference and polarization state rotation in the Sagnac interferometer. As a result, the intensity of the output light is modulated under the external magnetic field. Moreover, the modulator has a high extinction ratio and can easily be integrated in a single-mode fiber system. The performance of the modulator is not affected by ambient temperature variation from room temperature to 40 °C.     

Modulated excitonic absorption on Cu2O in magnetic or parallel electric and magnetic fields

In this paper, two modulation techniques are used: in one, the polarization of the light is modulated, in the other a pseudowavelength modulation is realized. The behaviour of the 3P line of the yellow series of Cu₂O is studied, in the presence of magnetic or electric fields, or both together (E∥H). The splitting of the 3P line in the magnetic field is described and analyzed. In parallel fields, rather strong effects are observed on this 3P line and also on the 3D and 4S fine structure lines.     

Low-frequency modulation of 0.6328 μm He–Ne laser by transverse magnetic field intensity

Effect of transverse magnetic field on 0.6328 μm He–Ne laser light polarized parallel and perpendicular to transverse magnetic field has been studied in this paper. Low-frequency modulation of two kinds of polarized laser light is completed and low-frequency modulation of polarization degree is put forward.     

Polarization-dependent refractometer for discrimination of temperature and ambient refractive index

Transmission characteristics of polarization-dependent refractometer based on a surface long-period grating (SLPG) inscribed in a D-shaped photonic crystal fiber (PCF) are investigated. The birefringence of SLPG produces the separation of transmission spectra for TE and TM polarization modes. We also measure the sensitivities of PCF-based SLPG to temperature and external refractive index change depending on the input polarization states. The SLPG-based sensor exhibits different temperature and ambient index sensitivities corresponding to TE and TM polarization modes. Therefore, the SLPG inscribed in D-shaped PCFs can effectively discriminate temperature and ambient index sensitivities.     

碳纳米管锁模双包层光纤激光器的实验研究

本文采用双包层掺镱光纤作为增益介质,用单壁碳纳米管作为饱和吸收体,获得最高输出功率为336 mW的锁模脉冲激光.用飞秒激光诱导水击穿法直接在单模光纤上制备出D形区,通过在D形光纤上滴涂单壁碳纳米管溶液,成功制备出碳纳米管饱和吸收体,并对其饱和吸收特性进行测试,发现其调制深度为27％.利用该饱和吸收体作为锁模器件,制备出具有环形腔结构的锁模光纤激光器.当抽运功率为4W时,获得了脉宽为93.8 fs,中心波长为1083.8 nm,3 dB谱宽为8.6 nm,重复频率为5.59 MHz,平均功率为336 mW的飞秒脉冲激光输出.     

Polarization-maintaining amplification of phase modulated pulse employing ytterbium-doped single-mode fiber amplifier

Polarization-maintaining fiber amplifier using ytterbium-doped single-mode fiber (SMF) is proposed. A 45° Faraday rotator mirror (FRM) and a polarization independent fiber loop circulator (FLC) with polarization-maintaining fiber (PMF) pigtails are used to realize double-pass amplification and birefringence self-compensation. Arbitrary state of polarization (SOP) such as the linear polarization and elliptical polarization can be maintained. Polarization-maintaining amplification of phase modulated pulse with this amplifier is experimentally demonstrated while introducing little intensity modulation itself.     

Measurement of electron spin lifetime and optical orientation efficiency in germanium using electrical detection of radio frequency modulated spin polarization

We propose and demonstrate a technique for electrical detection of polarized spins in semiconductors in zero applied magnetic fields. Spin polarization is generated by optical injection using circularly polarized light which is modulated rapidly using an electro-optic cell. The modulated spin polarization generates a weak time-varying magnetic field which is detected by a sensitive radio-frequency coil. Using a calibrated pickup coil and amplification electronics, clear signals were obtained for bulk GaAs and Ge samples from which an optical spin orientation efficiency of 4.8% could be determined for Ge at 1342 nm excitation wavelength. In the presence of a small external magnetic field, the signal decayed according to the Hanle effect, from which a spin lifetime of 4.6±1.0 ns for electrons in bulk Ge at 127 K was extracted.     

Tunable magnetoben-optic modulation based on magnetically responsive nanostructured magnetic fluid

Magnetic fluid is a kind of functional composite material with nanosized structure and unique optical properties. The tunable magneto-optic modulation of magnetic fluid under external magnetic field, achieved by adjusting the polarization direction of incident light, is investigated theoretically and experimentally in this work. The corresponding modulation depth and response time are obtained. The accompanying mechanisms are clarified by using the theory of dichroism of magnetic fluid and the aggregation/disintegration processes of magnetic particles within magnetic fluid when the external magnetic field turns on/off.     

非线性克尔效应对飞秒激光偏振的超快调制

研究了近红外飞秒激光的偏振在太赫兹频率的超快调制.利用抽运-探测光谱技术,通过改变两个脉冲之间的延迟时间可以控制光脉冲的旋转角.在Li：NaTb（WO₄）₂磁光晶体中观察到探测光的偏振随延迟时间变化的高速振荡,振荡信号的中心频率为0.19 THz.这种超快偏振调制现象可以解释为,抽运-探测实验构置中,前向传播的抽运光诱导的光学克尔非线性引起被晶体远端表面所反射的背向传播的探测光脉冲偏振面的额外旋转.通过改变抽运光的圆偏振旋性可以控制探测光调制信号的相位和振幅.实验结果表明,非线性光学克尔效应可以作为一种全新的手段,在磁光晶体中实现近红外飞秒激光以太赫兹频率的超快偏振调控.这将在超快磁光调制器等全光器件中得以应用.实验结果将有助于偏振依赖的超快动力学过程的研究.     

基于酒精与磁流体填充的单模-空芯-单模光纤结构温度磁场双参数传感器

提出了一种基于空芯光纤模间干涉原理的环境温度和磁场双参数传感器,为了使光入射进空芯光纤壁中,将空芯光纤与单模光纤错位熔接,传感部分用毛细玻璃管封装,空芯光纤内外分别填充酒精和磁流体.除了光纤材料的热光效应和热膨胀效应外,环境温度变化会引起两种溶液折射率的变化,而磁场变化仅引起空芯光纤外的磁流体折射率变化.理论计算可知空芯光纤壁中可支持多个模式传输并相互干涉,各模式传输相位对内外溶液折射率变化灵敏程度不同.因此,干涉谱中两个含有不同模式成分的波谷,即波谷1和波谷2,它们的漂移可以作为指示信号,通过建立敏感矩阵可同时解调出周围环境温度与磁场的变化.实验中,在28—58℃范围内,温度传感灵敏度可达-468 pm/℃;在0—169 Oe范围内磁场传感灵敏度可达82 pm/Oe.该传感器具有高灵敏度与高机械强度,并且能够实现温度与磁场的同时测量,有效消除了温度波动对磁场测量信号的干扰.     

Modeling and simulation of polarization errors in Sagnac fiber optic current sensor

Sagnac fiber optic current sensor (S-FOCS) is a kind of optical interferometer based on Sagnac structure, optical polarization states of sensing light wave in Sagnac fiber optic current sensor are limited. However, several factors induce optical polarization error, and non-ideal polarized light waves cause the interference signal crosstalk in sensor, including polarizer, quarter-wave retarder, splice angular, birefringence and so on. With these errors, linearly polarized light wave in PM fiber and circularly polarized light wave in sensing fiber become elliptically polarized light wave, then, nonreciprocal phase shift induced by magnetic field of the current is interrupted by wrong polarization state. To clarify characteristics of optical polarization error in fiber optic current sensor, we analyze the evolution process of random optical polarization state, linear optical polarization state and circular optical polarization state in Sagnac fiber optic current sensor by using Poincare sphere, then, build optical polarization error models by using Jones matrix. Based on models of polarization state in Sagnac fiber optic current sensor, we investigate the influence of several main error factors on optical polarization error characteristics theoretically, including extinction ratio in polarizer, phase delay in quarter-wave retarder, splice angular between quarter-wave retarder and polarization maintaining fiber. Finally, we simulate and quantify nonreciprocal phase shift to be detected in fiber optic current sensor related with optical polarization errors. In the end, we demonstrate S-FOCS in test. The results show that transfer matrix errors are induced by inaccurate polarization properties during polarization state conversion, then, the stability and accuracy of the S-FOCS are affected, and it is important to control the polarization properties at each step of the polarization state conversion precisely.     

Tunable chirped fiber Bragg grating based on the D-shaped fiber

A novel tunable chirped fiber Bragg grating is realized by bending a piece of D-shaped fiber Bragg grating into a specific shape like the character ‘Ω’. The principle of tuning is demonstrated by numerical simulation. The dispersion of the grating can be tuned while the center wavelength is kept nearly no shift. The experimental results match well with the numerical analysis. The influence from D-shaped fiber’s birefringence and polarization dependent loss is discussed theoretically and experimentally as well. This proposed tuning technique has potential applications in the optical communications and other fiber optics systems.     

Designing optical-fiber modulators by using magnetic fluids

To reduce interface loss between optical fibers and devices in telecommunication systems, the development of an optical-fiber-based device that can be fused directly with fibers is important. A novel optical modulator consisting of a bare fiber core surrounded by magnetic fluids instead of by a SiO2 cladding layer is proposed. Applying a magnetic field raises the refractive index of the magnetic fluid. Thus we can control the occurrence of total reflection at the interface between the fiber core and the magnetic fluid when light propagates along the fiber. As a result, the intensity of the outgoing light is modulated by variation in field strength. Details of the design, fabrication, and working properties of such a modulator are presented.     

Nonlinear phase shifts of modulated light waves with slow and superluminal group delay in stimulated Brillouin scattering

Brillouin amplification with counterpropagating modulated pump and Stokes light leads to nonlinear modulation-phase shifts of the interacting intensity waves. This is due to a partial transformation of the nonmodulated light component at the input into modulated light at the output as a result of a mixing process with the counterpropagating modulated component of the pump and results in an advance or delay of the input modulation. This occurs for interactions over less than half of a modulation wavelength. Milliwatts of power in a kilometer of standard single-mode fiber give significant tunability of the modulation phase.     

Measuring magnetic fields in plasmas by means of light scattering

The theory of light scattering in plasmas containing a magnetic field yields the special case of modulated scattering spectra. The modulation frequency is governed by the field in the plasma and is equal to the electron cyclotron frequency. In this investigation magnetic fields in a plasma were determined by a laser scattering experiment. The experimental data were: electron densityn _e=10¹⁶cm^?3, electron temperatureT _e=3.2 eV, scattering angle θ=90 °, scattering parameter α=0.6, and a maximum field in the plasma of 125 kG. The spectrum measured at the maximum magnetic field was modulated with 3.6 × 10¹¹ Hz. In scattering experiments with a field reduced by about 20% the observed modulation frequency was 2.8 × 10¹¹ Hz. A thermal spectrum with a smooth profile was found when no field was present in the plasma. Applying the theory of cyclotron modulated spectra one obtains from the scattering experiment magnetic fields of 128, 100, and 0 kG. Within the experimental accuracy these values agree well with the fields determined by means of magnetic probes. Other possible interpretations of the measured deviations from thermal spectra (modulation with the plasma frequency or additional cold electron components in the plasma) are discussed, but they afford no explanation. This experiment has domonstrated that magnetic fields in plasmas can be measured locally and almost without disturbance by means of light scattering.     

The converse magnetoelectric coupling in asymmetric granule/matrix composite film with Ni/PZT component

In this work, a type of asymmetric granule/matrix composite film is designed, where the Ni granule is dispersed in PZT matrix, meanwhile the top and bottom electrode is constituted by Au and SRO respectively. Predicted through the electrostatic screening model and mean field approximation, considerable electrostatic charge is induced on Ni granule surface by ferroelectric PZT polarization. Predicted through the spin splitting model and spherical shell approximation, both the magnetization and magnetic anisotropy of Ni granule are modulated by ferroelectric PZT polarization. As the volume fraction of Ni granule is increased, the electric modulation of magnetization and magnetic anisotropy is reduced and enhanced respectively. As the dimension of granule/matrix composite is varied, such modulation is retained. Due to the large area–volume ratio of nano-granule, this work benefits to realize the converse magnetoelectric coupling in nanoscale.     

A low-cost implementation of EPR detection in a dissolution DNP setup

The implementation of electron paramagnetic resonance (EPR) detection in a low-temperature dissolution dynamic nuclear polarization (DNP) setup is presented. Using a coil oriented parallel to the static magnetic field, the change of the longitudinal magnetization of free radicals is measured upon resonant irradiation of an amplitude or frequency modulated microwave (mw) field. The absorption EPR spectrum is measured if the amplitude of the mw field is modulated, whilst the first derivative of the spectrum is obtained with frequency modulation. Using a burst of pulses, it is also possible to perform pump-probe experiments such as saturation-recovery or electron-electron double resonance experiments. Furthermore, the magnetization could be monitored in a time-resolved manner during amplitude modulation, thus making it possible to record its transient as it is approaching an equilibrium value. Experimental examples are shown with frozen solutions of trityl radical and TEMPO, two commonly used radicals for dissolution DNP experiments.     

Optical fiber modulator derivates from hollow optical fiber with suspended core

A fiber optic integrated modulation-depth-tunable modulator based on a type of hollow optical fiber with suspended core is proposed and investigated. We synthesized magnetic fluid containing superparamagnetic Fe(3)O(4) nanoparticles and encapsulated it in the hollow optical fiber as the cladding layer of the suspended core by fusing the hollow optical fiber with the multimode optical fibers. The light with a wavelength of 632.8 nm is coupled in and out of the modulating element by a tapering technique. Experimental results show that the light attenuation in the system can be greatly influenced by only 2.0×10(-2) μL of the magnetic fluid under different magnetic field strengths. The saturated modulation depth is 43% when the magnetic field strength is 489 Oe. The response time of the system is <120 ms. Significantly, this work presents information for the development of all-fiber modulators, including other integrated electro-optic devices, such as optical switch, optical fiber filter, and magnetic sensors utilizing the special structure of this hollow optical fiber with suspended core and superparamagnetic magnetic fluid.     

Symmetry and magnetic field driven transitions in the 2D triangular lattice compound RbFe(MoO4)2

The temperature versus magnetic field phase diagram of the 2D triangular lattice and multiferroic compound RbFe(MoO(4))(2) is analysed from the point of view of symmetry. The paramagnetic space group and its irreducible representations are used in order to obtain the magnetic symmetry of the possible modulated phases and characterize the restrictions imposed by this symmetry on the corresponding magnetic structures. Superspace symmetry is considered in the case of incommensurate phases. It is shown that the experimentally observed phases correspond to different isotropy subgroups originating in the same irreducible representation of the paramagnetic symmetry group. The relevant couplings between the primary transverse spin modulation and the electric polarization, the in-plane magnetization and the secondary longitudinal magnetic modulation are discussed. The mechanisms for the destabilization of the improper ferroelectric chiral phase and the origin of the different orientation of the spins with respect to the external field in the two collinear phases are analysed from a symmetry based perspective.     

信号光的调制对基于光纤光参量放大光脉冲源的改善

在理论上从四波混频的强度耦合方程出发,给出了基于光纤光参量放大(FOPA)光脉冲的光场表达式,并进一步分析了信号光被相位调制或强度调制后,光脉冲的频率啁啾和强度演化.结论指出：若信号光被强度调制,对所生成脉冲宽度无明显的影响,但可以提高消光比;若信号光被相位调制,所生成的脉冲具有更大的线性正啁啾,可以在相同的抽运功率条件下得到比无相位调制时更窄的脉冲.实验上给出了10 GHz工作速率下的结果,其结果与理论分析符合得很好.通过信号光的相位调制,在05 W平均抽运功率条件下得到了消光比22 dB,脉宽为5 关键词： 光纤参量放大 四波混频 光脉冲源 频率啁啾