Slow light propagating characteristics through a two-dimensional silicon-based coupled-resonator optical waveguide

The light propagating characteristics of the coupled-resonator optical waveguides (CROWs) are studied by the finite-difference time-domain method. The circular CROWs are constructed by arranging the micro-cavities at a certain distance, which is constructed by removing the air holes along the edge of a circle from a two-dimensional (2D) triangular-lattice photonic crystal (PC). With the increasing of distance between the adjacent cavities, the group velocities of the guiding modes reduce significantly. The circular CROW studied in the paper have much minibands within the band gap, and their respective group velocities can be quite different from each other. This kind of CROW structure can provide different group velocities for the light signals with different frequencies, and avails to the separating and controlling the light signals in the all optic integrated circuits.     

Negative Refraction and Near-Field Imaging of an Elliptical-Rod Photonic Crystal Slab in the Second Band

Negative refraction and imaging properties of the electromagnetic wave through a two-dimensional photonic crystal （PC） slab, which consists of a square lattice of elliptical dielectric rods immersed in the air background, is studied by the plane-wave expansion method and the finite-difference time-domain method. A point source placed in the vicinity of the PC slab can form a good-quality image spot through the PC slab for the incident frequencies within the second photonic band. The calculated result also shows that negative refraction occurs in this kind of PC slab.     

Preparation of one-dimensional porous silicon photonic quantum-well structures

One-dimensional porous silicon (PSi) photonic quantum-well structures have been electrochemically fabricated and spectroscopically characterized. The photonic well in the structure is a photonic crystal (PC) consisting of alternately stacked high- and low-refractive-index PSi layers. Discrete states are observed in both reflectance and transmission spectra. It is found that the number of confined states appearing in the photonic bandgap of the photonic barrier depends on the number of periods adopted in the well PC. Thus, increased confined photonic states can be created simply by increasing the number of periods of the well PC in the structures. Received: 26 February 2002 / Accepted: 17 May 2002 / Published online: 4 December 2002 RID="*" ID="*"Corresponding author. Fax: +86-21/6510-4949, E-mail: xyhou@fudan.edu.cn     

Large-scale photonic crystals with inserted defects and their optical properties

Deliberately introducing defects into photonic crystals is an important way to functionalize the photonic crystals. We prepare a special large-scale three-dimensional(3D) photonic crystal(PC) with designed defects by an easy and low-cost method. The defect layer consists of photoresist strips or air-core strips. Field emission scanning electron microscopy(FESEM) shows that the 3D PC is of good quality and the defect layer is uniform. Different defect states shown in the ultraviolet-visible spectra are induced by the photoresist strip layer and air-core strip layer. The special large-scale 3D PC can be tested for integrated optical circuits, and the defects can act as optical waveguides.     

基于杂质带的光子晶体矩形波形滤波器的实现

利用转移矩阵方法对基于杂质带的光子晶体矩形波形滤波器的实现进行了研究.除了可选择不同折射率的材料外,该滤波器还可通过调整光子晶体本身的结构参量来实现.对较平杂质带的形成机制做了具体的理论分析和解释,通过数值计算光子晶体原子耦合成光子晶体分子的过程,发现光子晶体原子的线宽与光子晶体分子线宽之间的相对大小是决定能否形成较平杂质带的重要参量.     

纳米压印技术制备表面光子晶体LED的研究

利用表面光子晶体能大幅提高发光二极管(LED)的外量子效率, 但如何制备大面积的纳米光子晶体是该研究方向的主要难点之一. 本文基于纳米压印技术在氮化镓基发光二极管(GaN-LED)表面制作孔状二维光子晶体. 通过以金属和聚合物双层掩膜干法刻蚀法, 得到了很好的光子晶体图形转移效果. 最终在LED的p-GaN层表面获得了大面积光子晶体, 周期为450 nm, 纳米孔直径为240 nm. 器件测试结果显示, 有表面光子晶体的LED比没有光子晶体的LED, 光致发光强度峰值提高到了7.2倍.     

等效折射率为非-1时的亚波长成像

本文采用硅柱子周期性排列构成六角结构光子晶体,用平面波展开方法和FDTD方法研究表明,此结构光子晶体存在等效折射率接近-1的频率区域.在等效折射率趋于-1但不等于-1时,此光子晶体平板结构超透镜能形成一个非近场的像.模拟还发现,此结构平板光子晶体等效折射率为非-1时,可以亚波长成像. 关键词： 负折射 光子晶体 亚波长 成像     

Fractional density of states and the overall spontaneous emission control ability of a three-dimensional photonic crystal

Fractional density of states(FDOS) hinders the accurate measuring of the overall spontaneous emission(SE)control ability of a three-dimensional(3 D) photonic crystal(PC) with the current widely used SE decay lifetime measurement systems. Based on analyzing the FDOS property of a 3 D PC from theory and simulation,the excitation focal spot position averaged FDOS with a distribution broadening parameter was proposed to accurately reflect the overall SE control ability of the 3 D PC. Experimental work was done to confirm that our proposal is effective, which can contribute to comprehensively characterizing the SE control performance of photonic devices with quantified parameters.     

Design of air-guiding honeycomb photonic bandgap fiber

We introduce a design procedure for hollow-core photonic bandgap (PBG) fiber with a cladding made of air-silica honeycomb photonic crystal (PC). It is found that air-guiding can be realized in both fundamental and secondary PBG regions of the cladding PC. Dispersion and radiation loss of the fundamental mode for two types of fiber structure are theoretically calculated. The fibers show promising waveguiding ability.     

基于量子阱效应的光开关

把三块各带有一个缺陷的光子晶体结合起来，如果中央晶体的缺陷模处在两侧晶体的禁带中，缺陷模内的光波会受到两侧晶体的阻碍并被局域在中央晶体内，形成量子阱结构；若一侧晶体的缺陷模被移动到中央晶体缺陷模处，则只有一侧晶体阻碍在中央晶体缺陷模内传播的光波，量子阱效应完全消失，光的传输受到最大程度的阻碍.这种结构可同时具有窄带滤波器和光开关的功能，据此提出了一种高效的、灵敏的光开关的设计.采用传输矩阵法计算了一维光子晶体的透射谱和场分布.     

All angle negative refraction with the effective phase index of-1

We theoretically studied a left-hand structure based on a two-dimensional (2D) photonic crystal (PC)with a negative refractive index. The propagation of electromagnetic waves in the proposed PC structure is investigated through dispersion characteristic analysis and numerical simulation of field pattern. The designed PC structure can exhibit all angle negative refraction, and the corresponding effective refractive indices along all directions are almost same and close to the ideal value of -1. A flat lens formed from such a PC has been designed and its imaging properties have been investigated systematically.     

二维光子晶体量子阱的光谱特性研究

研究了二维光子晶体量子阱的光谱特性,该量子阱结构由二维正方晶格圆柱晶胞光子晶体通过移去中间位置的介质圆柱层形成。由于光子晶体中的光子禁带充当了光子运动的势垒,类似于半导体量子阱中电子的行为,在光子晶体量子阱结构中会出现量子化的光子能态。文章利用平面波展开法计算了所用光子晶体的能带结构,利用传输矩阵方法计算了量子阱结构的透射光谱。计算结果表明,在光子禁带中出现了离散的透射峰,透射峰的强度随着势垒宽度的增加而减弱,个数随着势阱宽度的增加而增加,通过计算得到了其定量关系,并且讨论了透射峰频率与势阱宽度的关系。     

光控液晶光子晶体微腔全光开关

设计了一种缺陷模迁移光子晶体微腔全光开关. 两条二维三角晶格空气孔光子晶体波导由一个光子晶体微腔连接, 在微腔的点缺陷中填充掺有少量偶氮聚合物的苯乙炔类液晶. 通过调节控制光的偏振态, 使偶氮聚合物发生顺-反异构化反应, 带动液晶分子重新取向, 从而改变光子晶体微腔的谐振波长, 进而实现光的通过与截止. 运用时域有限差分法和平面波展开法分析 了二维光控液晶光子晶体微腔全光开关的光学特性. 数值计算结果表明: 对于1.55 μ通信波段通过外界偏振光控制所填充的向列相液晶 的折射率可以实现对光波的导通与截止. 分析结果显示, 此开关具有阈值低, 消光比较大, 体积小等优点. 关键词： 二维光子晶体微腔 波导 时域有限差分(FDTD) 液晶     

Optical properties of chiral photonic crystals with linear profiles of modulation parameters

The oblique propagation of light through a layer of chiral photonic crystal (PC) with linear profiles of modulation parameters is considered. The problem is solved by the method of Ambartsumyan layer addition. The wavelength dependences of the amplitude characteristics have been studied at different angles of incidence in two cases, i.e., in a chiral PC with a linear profile of modulation period and a chiral PC with a linear profile of modulation depth. It is shown that the photonic band gap is broadened in both cases and that omnidirectional reflection occurs under certain conditions. The nonreciprocity features are investigated for these two cases and it is shown that a chiral PC with a linear profile of modulation period can operate as an ideal optical diode in a certain frequency range. The features of the effect of change in the modulation parameters on the photon density of states, group velocity, and group velocity dispersion are analyzed. It is shown that, when the modulation parameters change in space, the photon density of states at the photonic band gap edges significantly decreases. It is proposed to use PCs with a spatially changing modulation period can be used to compress (expand) light pulses.     

获得非对称约束光子晶体缺陷透射特性的方法

利用缺陷模的有关参量得到了非对称约束的光子晶体缺陷的透射特性。理论分析发现,在时间耦合模理论的框架内,非对称约束可以看做是两种不同程度的对称约束的简单组合。因而由对称约束的光子晶体缺陷模的衰减率,能够方便地得到非对称约束的光子晶体缺陷的透射特性。所有理论分析与基于时域有限差分法的模拟计算完全符合。     

液晶调制的光子晶体可控偏光片和光开关

与介质柱型光子晶体相比，空气孔光子晶体更易于制作和集成而更有应用价值.采用平面波展开法证实了填充液晶的二维三角形分布的空气孔光子晶体方向能隙的可调节性.数值模拟结果表明：1)通过外界电场控制空气孔中所填充的相列液晶的方向可以对光子晶体的方向能隙进行调节，这种可调节性可用于制作场敏偏光片.这与Liu等人研究介质柱型光子晶体的结论相类似；2)用phenylacetylene型液晶替代5CB液晶作为填充物质所得到的空气孔光子晶体偏光片可使用的频率范围显著增大.在此基础上，还研究了填充液晶的光子晶体波导传输谱线的可调节性对特定波长的光切断和开通控制的原理，实现了与以往光开关原理不同的光子晶体光开关. 关键词： 光子晶体 液晶 可调节性 平面波展开法 场敏偏光片     

Manipulating light flow with one-dimensional photonic crystals of an electromagnetically induced transparency medium

The band structures and equifrequency contours of one-dimensional photonic crystals (PCs), which consist of an electromagnetically induced transparency (EIT) medium and a common dielectric medium, can be dramatically changed by tuning the coupling field intensity (or coupling Rabi frequency, CRF) of the EIT medium. It is found that for a probe light at a fixed frequency, either positive or negative refraction in the EIT PC can be realized with a proper CRF. The behavior of a Gaussian beam (probe light) obliquely incident on such an EIT PC slab is simulated numerically. The probe light beam transmitted from the slab can be shifted transversely in a large range, and negative refraction enhances this effect. The present scenario can be applied in some areas such as quantum optical and photonic device designs.     

Design for directional emitter based on self-collimation photonic crystal by adding two-layer dielectric rods

We propose a novel directional emitter for achieving highly efficient beaming of self-collimated light from two-dimensional photonic crystal (PC). The structure is composed of a two-dimensional (2D) photonic crystal and two-layer dielectric rods. The finite-difference time-domain (FDTD) simulations show that the emission properties are sensitive to the distance between photonic crystal and two-layer dielectric rods. By adjusting the relative position of the two-layer dielectric rods, highly efficient beaming emission can be realized.     

Improved air-silica photonic crystal with a triangular airhole arrangement for hollow-core photonic bandgap fiber design

We propose an improved photonic crystal (PC) cladding design for existing air-guiding photonic bandgap (PBG) fibers whose cladding airholes are arranged in a triangular lattice pattern. By increasing the sizes of concentrated silica regions in the cladding PC, we can have a larger degree of freedom in controlling the cladding bandgap regions. We predict that a fiber made from this type of cladding would perform better in terms of the PBG-guiding wavelength range, radiation loss owing to finite cladding size, and the ability to avoid surface mode problems.     

一维Al/SrF2低温超导体-电介质光子晶体能带结构

基于二流体电子模型和平面波展开法,计算了一维Al/SrF2超导体-电介质光子晶体的能带结构.结果表明:随着超导层厚度的增加,第一光子带隙中心频率和截止频率均发生蓝移,且第一带隙宽度逐渐增加到一个峰值后又逐渐变窄.更重要的是,在低于临界温度的超低温环境中,温度的微小变化,对该类光子晶体的带隙宽度、中心频率以及截止频率均有...