湿热环境中复合材料层合圆柱薄壳的屈曲和后屈曲

在宏-细观力学模型框架下,讨论湿热环境对复合材料层合圆柱薄壳在轴向压缩作用下屈曲和后屈曲行为的影响.基于细观力学模型复合材料性能与湿度和温度变化有关.壳体控制方程基于经典层合壳理论,并包括湿热效应.壳体屈曲的边界层理论被推广用于湿热环境的情况,相应的奇异摄动法用于确定层合圆柱薄壳的屈曲荷载和后屈曲平衡路径.分析中同时计及壳体非线性前屈曲变形和初始几何缺陷的影响.数值算例给出完善和非完善正交铺设层合圆柱薄壳在不同湿热环境中的后屈曲行为.讨论了温度和湿度,纤维体积比率,壳体几何参数,铺层数,铺层方式和初始几何缺陷等各种参数变化的影响.     

复合材料层合剪切圆柱曲板在侧压作用下的后屈曲

基于Reddy高阶剪切变形理论的Kármám-Donnell型非线性壳体方程,给出复合材料层合剪切圆柱曲板在侧压作用下的后屈曲分析。将壳体屈曲的边界层理论推广到复合材料层合剪切圆柱曲板受侧压作用的情况。相应的奇异摄动法,用于确定圆柱曲板的屈曲荷载和后屈曲平衡路径。分析中同时考虑非线性前屈曲变形和初始几何缺陷的影响。数值算例给出完善和非完善,中等厚度正交铺设层合圆柱曲板的后屈曲荷载-挠度曲线。讨论了横向剪切变形,曲板几何参数,铺层数,铺展方式和初始几何缺陷等各种参数变化的影响。     

湿热环境中复合材料层合圆柱薄壳屈曲和后屈曲

在宏-细观力学模型框架下,讨论湿热环境对复合材料层合圆柱薄壳在轴向压缩作用下屈曲和后屈曲行为的影响。基于细观力学模型复合材料性能与湿度和温度变化有关。壳体控制方程基于经典层合壳理论,并包括湿热效应。壳体屈曲的边界层理论被推广用于湿热环境的情况,相应的奇异摄动法用于确定层合圆柱薄壳的屈曲荷载和后屈曲平衡路径。分析中同时计及壳体非线性前屈曲变形和初始几何缺陷的影响。数值算例给出完善和非完善正交铺设层合圆柱薄壳在不同湿热环境中的后屈曲行为。讨论了温度和湿度,纤维体积比率,壳体几何参数,铺层数,铺层方式和初始几何缺陷等各种参数变化的影响。     

热-压电效应对轴压混合层合圆柱曲板后屈曲的影响

基于Karman-Donnell型非线性壳体方程，给出带压电作动器混合层合圆柱曲板在机械荷载、电荷载和热荷载作用下的后屈曲分析．假定温度场为均匀分布，电场仅有沿板厚方向的分量Ez，且假定材料性能常数与温度和电场的变化无关。将壳体屈曲的边界层理论推广到混合层合圆柱曲板受复合荷载作用的情况.相应的奇异摄动法用于确定圆柱曲板的屈曲荷载和后屈曲平衡路径.分析中同时考虑非线性前屈曲变形和初始几何缺陷的影响．数值算例给出完善和非完善，含整体覆盖或内埋压电作动器正交铺设层合圆柱曲板的后屈曲平衡路径。讨论了温度变化、控制电压、铺层方式、面内边界条件和初始几何缺陷等各种参数变化的影响。     

弹性介质中受轴向冲击载荷作用的圆柱壳的屈曲临界载荷计算分析

建立并求解了弹性介质中圆柱壳的径向位移控制方程,考虑边界条件及相容条件,得到了应力波传播及反射过程中圆柱壳的动力屈曲分叉条件.通过计算得到了不同时间段屈曲临界载荷与应力波波阵面到达圆柱壳的位置、弹性介质的刚度、壳体未嵌入弹性介质部分的长度与总长之比的关系.数值计算结果表明,弹性介质中的圆柱壳发生轴对称屈曲和非轴对称屈曲趋势一致;嵌入弹性介质部分越深、弹性介质刚度越大圆柱壳越难屈曲;屈曲临界载荷随着弹性介质刚度的增大经历了增长缓慢、增长迅速以及增长较慢3个阶段;应力波反射前波阵面通过分界面后,屈曲仅发生在应力波传播区域,反射波波阵面通过分界面前,临界载荷较小时屈曲先发生在反射端部,随着轴向阶数增大,屈曲覆盖整个圆柱壳区域,反射波波阵面通过分界面后,壳体发生的屈曲始终覆盖整个圆柱壳区域.     

热冲击荷载作用下的含球形空腔的广义热弹性功能梯度球形各向同性体

在带两个松弛时间参数的广义热弹性线性理论(Green和Lindsay理论)意义上,研究含一个球形空腔的功能梯度球形各向同性无限大弹性介质中,热弹性位移、应力和温度的求解方法.空腔表面无应力,但承受一个随时间变化的热冲击荷载作用.在Laplace变换域中,给出了一组矢量-矩阵微分方程形式的基本方程,并用特征值方法求解.应用Bellman方法进行数值逆变换.计算了位移、应力和温度,并给出相应的图形.结果表明,材料热物理性质的变化,对荷载响应的影响非常强烈.并与对应的均匀材料进行了比较和分析.     

功能梯度梁在热-机械荷载作用下的几何非线性分析

基于经典梁理论，运用虚功原理和变分法推导了均匀变温场与横向均布荷载联合作用的功能梯度梁的几何非线性控制方程.考虑端部不可移夹紧边界条件，运用打靶法求解了该两点边值问题.当横向均布荷载为0时，考察了功能梯度梁的热屈曲临界升温和屈曲平衡路径.当均匀变温与横向均布荷载都不为0时，考察了功能梯度梁的荷载 挠度曲线.数值结果表明:随材料体积分数指数增加，梁的有量纲热屈曲临界升温显著减小，后屈曲变形显著增加；变温对功能梯度梁的荷载 挠度曲线影响非常显著.发现了功能梯度梁的双稳态构形及其转换现象，梁的最终平衡位形不但与变温及荷载参数有关，还与加载历程有关.     

高阶剪切变形板理论K■rm■n型方程及在热后屈曲分析中的应用

本文基于Reddy高阶剪切变形板理论导出Karman型非线性大挠度方程并用于层合板热后屈曲分析．分析中计及板初始几何缺陷和热效应．给出了四边简支．对称正交铺设层合板在均匀或非均匀抛物型热分布作用下的后屈曲分析．采用摄动-Galerkin混合法确定板的热屈曲载荷与热后屈曲平衡路径．同时讨论了横向剪切变形，板长宽比，铺层数以及初始几何缺陷等各种参数变化的影响．     

扁球壳在均布压力与均匀温度场联合作用下的屈曲

根据扁壳几何非线性理论,推导了均布压力与均匀温度场联合作用下的扁球壳的位移型几何非线性控制方程.考虑夹紧边界条件,采用打靶法得到了扁球壳轴对称弯曲与屈曲的数值结果.讨论了壳体几何参数对平衡路径、临界荷载的影响.给出了壳体临界几何参数.当几何参数大于临界几何参数时,上、下临界荷载都随几何参数增加而增加.给定几何参数时,考察了不同均匀温度场对壳体上、下临界荷载、临界几何参数以及平衡构型的影响.均匀升温会使上临界荷载显著增加,会使下临界荷载略有减小.均匀变温会使临界几何参数改变.     

在受轴向周期扰动作用下双壁碳纳米管动力屈曲的研究

对双壁碳纳米管受轴向周期扰动的动力响应进行了研究．采用连续体模型研究双壁碳纳米管的动力屈曲问题,考虑了壁间van der Waals力和周围弹性介质对轴向动力屈曲的影响．给出了受轴向周期扰动的屈曲模型及临界应变和临界频率．发现双壁碳纳米管由于壁间van der Waals力的作用较单壁碳纳米管具有较低的临界应变．van der Waals力和周围弹性介质将影响双壁碳纳米管不稳定区,van der Waals力使受轴向周期性扰动的双壁碳纳米管的临界频率增大,周围弹性介质对双壁碳纳米管的临界频率影响不大．     

Finite element buckling analysis of multi-layered graphene sheets on elastic substrate based on nonlocal elasticity theory

Graphene-polymer nano-composites are one of the most applicable engineering nanostructures with superior mechanical properties. In the present study, a finite element (FE) approach based on the size dependent nonlocal elasticity theory is developed for buckling analysis of nano-scaled multi-layered graphene sheets (MLGSs) embedded in polymer matrix. The van der Waals (vdW) interactions between the graphene layers and graphene-polymer are simulated as a set of linear springs using the Lennard-Jones potential model. The governing stability equations for nonlocal classical orthotropic plates together with the weighted residual formulation are employed to explicitly obtain stiffness and buckling matrices for a multi-layered super element of MLGS. The accuracy of the current finite element analysis (FEA) is approved through a comparison with molecular dynamics (MD) and analytical solutions available in the literature. Effects of nonlocal parameter, dimensions, vdW interactions, elastic foundation, mode numbers and boundary conditions on critical in-plane loads are investigated for different types of MLGS. It is found that buckling loads of MLGS are generally of two types namely In-Phase (INPH) and Out-of-Phase (OPH) loads. The INPH loads are independent of interlayer vdW interactions while the OPH loads depend on vdW interactions. It is seen that the decreasing effect of nonlocal parameter on the OPH buckling loads dwindles as the interlayer vdW interactions become stronger. Also, it is found that the small scale and polymer substrate have noticeable effects on the buckling loads of embedded MLGS.     

阶梯柱屈曲的改进Fourier级数分析

该文对阶梯柱的弹性屈曲问题进行了研究。首先基于改进Fourier级数法采用局部坐标逐段建立阶梯柱的位移函数表达式,然后由带约束的势能变分原理得到含屈曲荷载的线性方程组,利用线性方程组有非零解的条件把问题转化为矩阵特征值问题得到临界载荷,最后讨论方法中的参数取值,并把结果与已有文献和有限元的结果比较,从而验证方法的精度。所提模型在阶梯柱的两端和变截面处引入横向弹簧和旋转弹簧,通过改变弹簧的刚度值模拟不同的边界。所提方法在工程设计中能比较精确地确定各种弹性边界条件下阶梯柱的临界载荷。     

Free vibration,buckling and dynamic stability of bi-directional FG microbeam with a variable length scale parameter embedded in elastic medium

In this paper, size dependent free vibration, buckling and dynamic stability of bi-directional functionally graded (BDFG) microbeam embedded in elastic medium are investigated. The material properties vary along both thickness and axial directions. In particular, the material length scale parameter of microbeam is considered as a function of spatial coordinates and varies with the material gradient parameters. The system of differential equations with variable coefficients governing the motion of BDFG microbeam is derived employing Hamilton’s principle, the modified couple stress theory and third-order shear deformation beam theory. The differential quadrature method (DQM) is utilized to solve the static and dynamic problem. Three different models evaluating the material length scale parameter of BDFG microbeam are presented for comparison. Parametric studies are carried out to show the influence of gradient parameters, size effect, stiffness of elastic medium on the free vibration, buckling and dynamic stability characteristic of BDFG microbeam. Results show that the variation of material length scale parameter should be considered in the analysis of BDFG microbeam.     

Robust observer design for nonlinear uncertain switched systems under asynchronous switching

Switching between the system and the associated observer or controller is in fact asynchronous in switched control systems. However, many times we assume it synchronous, for simplicity. In this paper, the robust observer design problems for a class of nonlinear uncertain switched systems for synchronous and asynchronous switching are addressed. At first, a robust observer under synchronous switching is proposed based on average dwell time approach. After that, the results are extended to robust observer design in the asynchronous case. In this case, two working modes are adopted to facilitate the studies on the issue. Finally, an extension case covering more practical applications is investigated under asynchronous switching. The designed observer cannot maintain the asymptotical stability of error state, but the eventual boundness is guaranteed. At the end, a numerical design example is given to illustrate our results.     

Synchronous motion of two vertically excited planar elastic pendula

The dynamics of two planar elastic pendula mounted on the horizontally excited platform have been studied. We give evidence that the pendula can exhibit synchronous oscillatory and rotation motion and show that stable in-phase and anti-phase synchronous states always co-exist. The complete bifurcational scenario leading from synchronous to asynchronous motion is shown. We argue that our results are robust as they exist in the wide range of the system parameters.     

Size-Dependent Effects of Micro-Nano Mindlin Plates Based on the Couple Stress Theory北大核心CSCD

基于偶应力理论,建立了适用于微纳米结构的Mindlin板理论。考虑横向剪切变形和材料的尺度效应并引入长度尺寸参数,推导了各向同性微纳米Mindlin板的本构方程。根据板的平衡条件,进一步推导出用位移函数和转角函数表示的板的屈曲和振动控制方程。通过对位移和转角变量进行空间和时间域上的分离,得出了四边简支（SSSS）和对边简支、对边固支（SCSC）两种边界情况下微纳米板的屈曲和振动问题的解析解。然后利用MATLAB软件进行算例分析,获得了不同尺寸参数、长宽比、厚长比等情况下板的临界屈曲荷载和固有频率。研究结果与已有文献中的结果以及ABAQUS有限元仿真解进行对比,结果表明,不同参数下的三种方法得到的结果均十分接近。算例分析发现,尺度效应对屈曲载荷和固有频率都有显著影响。     

A fractional nonlocal time-space viscoelasticity theory and its applications in structural dynamics

To overcome the long wavelength and time limits of classical elastic theory, this paper presents a fractional nonlocal time-space viscoelasticity theory to incorporate the non-locality of both time and spatial location. The stress (strain) at a reference point and a specified time is assumed to depend on the past time history and the stress (strain) of all the points in the reference domain through nonlocal kernel operators. Based on an assumption of weak non-locality, the fractional Taylor expansion series is used to derive a fractional nonlocal time-space model. A fractional nonlocal Kevin–Voigt model is considered as the simplest fractional nonlocal time-space model and chosen to be applied for structural dynamics. The correlation between the intrinsic length and time parameters is discussed. The effective viscoelastic modulus is derived and, based on which, the tension and vibration of rods and the bending, buckling and vibration of beams are studied. Furthermore, in the context of Hamilton’s principle, the governing equation and the boundary condition are derived for longitudinal dynamics of the rod in a more rigorous manner. It is found that when the external excitation frequency and the wavenumber interact with the intrinsic microstructures of materials and the intrinsic time parameter, the nonlocal space-time effect will become substantial, and therefore the viscoelastic structures are sensitive to both microstructures and time.     

Stability of hydrostatic-pressured FGM thick rings with material nonlinearity

Buckling behaviors of elastoplastic ceramic/metallic functionally graded material (FGM) rings are investigated by using the first order shear deformation theory. The hydrostatic-pressured rings are assumed to be in both the plane-stress case and the plane-strain case, which lead respectively to a uniaxial and a biaxial elastoplastic stress states in prebuckling stage. A uniform strain hypothesis helps to deal with the elastoplastic stress states. By introducing in the graded material properties, the constitutive model of FGMs is formulated under the framework of J₂ deformation theory. By considering the kinetic relations of von-Kárman type and employing the principle of virtual displacement, the equilibrium equations and the buckling governing equations of FGM circular rings are formulated, and the analytical solution of the anisotropic rings is obtained. Finally, the elastoplastic buckling problem is numerically solved through a semi-analytical method, which is proposed to seek the real circumferential strain of FGM rings at the buckling point and determinate the elastoplastic buckling critical hydrostatic pressure. The effects of the inhomogeneous and geometrical parameters on the buckling critical load and the position of the elastoplastic interface are discussed. Results show that, in both the plane-stress and the plane-strain cases, the elastoplastic critical loads are generally lower than their elastic counterparts due to material flow, and the plane-strain critical load is generally larger than the plane-stress one. The elastoplastic critical load does not always decrease monotonously with the increase of the inhomogeneous parameters, which is quite different from their elastic counterparts.     

扁壳压曲的蠕变效应

本文讨论了混凝土扁壳压曲的蠕变效应.基于弹性薄壳的非线性理论,发现椭圆抛物面扁壳,其荷载-挠度曲线的上临界荷载将随时间而降低,而下临界荷载则随时间而上升.至于扁壳的局部失稳问题,其临界荷载仅取决于压曲发生瞬间材料的弹性模量.     

迷宫密封不平衡转子动力系统的稳定性与分岔

研究迷宫密封对不平衡转子系统动力稳定性的影响.存在不平衡量的转子在旋转过程中受到周期激励,低转速时,转子作与激励同频率的周期运动,随着转速的提高,达到一定阈值时周期运动开始失稳.对迷宫密封的气动力采用Muszynska非线性力学模型,用打靶法求解转子运动周期解,并根据Floquet理论分析了周期解的稳定性及失稳后的动力学特性.