首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 20 毫秒
1.
在Rao给出的理想纱条的数学定义的基础上,进一步提出利用泊松过程来描述纤维在理想纱条中的随机排列.由此得出纱条片段中纤维左头端数服从泊松分布,相邻纤维的左头端间隔距离服从指数分布,纤维左头端在纱条中的位置服从均匀分布,纱条截面的纤维根数服从泊松分布,这对理解纤维在纱条中的排列结构以及模拟纤维在纱条中的随机排列提供了基础.在此模型的基础上对纱条的条干不匀进行了分析,给出了考虑纤维细度因素之后的条干不匀公式.  相似文献   

2.
We use the methods of the renormalization group and the operator product expansion to consider the problem of the stochastic advection of a passive vector field with the most general form of the nonlinear term allowed by the Galilean symmetry. The external velocity field satisfies the Navier-Stokes equation. We show that the correlation functions have anomalous scaling in the inertial range. The corresponding anomalous exponents are determined by the critical dimensions of tensor composite fields (operators) built from only the fields themselves. We calculate the anomalous dimensions in the leading order of the expansion in the exponent in the correlator of the external force in the Navier-Stokes equation (the oneloop approximation of the renormalization group). The anomalous exponents exhibit a hierarchy related to the anisotropy degree: the lower the rank of the tensor operator is, the lower its dimension. The leading asymptotic terms are determined by the scalar operators in both the isotropic and the anisotropic cases, which completely agrees with Kolmogorov’s hypothesis of local isotropy restoration.  相似文献   

3.
The plane problem of the sliding contact of a punch with an elastic foundation when there is friction and wear is considered. Assuming the existence of a steady solution in a moving system of coordinates, relations are derived between the sliding velocity, the wear, the contact stresses and the displacements for an arbitrary dependence of the wear rate on the contact pressure. Taking into account the presence of a deformation component of the friction force, an equation is written for the balance of the mechanical energy for the punch - elastic base system considered. It is shown that the equality of the work of the external force in displacing the punch to the losses due to friction and the change in the shape of the foundation due to wear is satisfied when the work done by the contact stresses on the increments of the boundary displacements is equal to zero, and the frictional losses must be determined taking into account the non-uniformity of the distributions of the shear contact stresses and the sliding velocity in the contact area. Two special cases of the foundation in the form of a wide and narrow strip are considered, for which the total coefficient of friction is calculated, taking into account the deformation component of the friction force.  相似文献   

4.
以传统CPPI投资策略的分析框架为基础,在风险资产为连续价格波动的条件下,构建离散投资决策时点的CPPI投资策略。引入模糊决策的分析方法度量投资决策者的心理预期,将传统CPPI投资策略中的投资乘数修正为随机模糊投资乘数,采用马尔科夫链蒙特卡洛模拟风险资产未来市场价格,利用模糊隶属函数描述投资决策者对未来市场运行状况预期的不确定性,保证即使投资决策者预期不精确的条件下,也能保证离散CPPI投资策略获得相对稳定的投资效果。利用中国证券市场上的真实数据进行实证检验,认为:随机模糊投资乘数最大限度地涵盖了投资决策者主观预测的不确定性;基于随机模糊投资乘数的离散CPPI投资策略在不同的市场运行状况中,较传统的CPPI投资策略更具投资的灵活性,可以在保证投资保险的前提下,追求较高的投资收益。  相似文献   

5.
研究了加总式和乘积式的方差分解问题,证明了在因变量等于各自变量之和的条件下,因变量方差等于各自变量与因变量的协方差之和;在因变量等于各自变量之乘积的条件下,因变量对数值的方差等于各自变量对数值与因变量对数值的协方差之和.以中国31个省份2005-2012年的居民人均收入及其影响因素的统计数据资料为例,说明了加总式和乘积式的方差分解法的具体应用.  相似文献   

6.
Under study is the nonlinear equilibrium problem for an elastic Timoshenko-type shallow shell containing a through crack. Some boundary conditions in the form of inequalities are imposed on the curve defining the crack. We establish the unique solvability of the variational statement of the nonlinear problem of the equilibrium of a shell. We prove that, for sufficient smoothness of the solution, the initial variational statement is equivalent to the differential formulation of the problem. We deduce the boundary conditions on the inner boundary that describes the crack. In the case of the zero opening of the crack, we prove the local infinite differentiability of the solution function with additional assumptions on the functions defining the curvatures of the shell and the external loads.  相似文献   

7.
以四连杆机械为例,其自由度是1,整个机构的质心只需一个独立参变数描述.故机构的质心对该参数的导数等于零即机构质量中心保持固定的充要条件.通过对线性方程组基础理论的巧妙利用,给出了四连杆在工作状态下质心保持稳定的几何特征.  相似文献   

8.
以居民对援疆政策满意度为出发点,前学者的研究基础上确定援疆政策效果的满意度的衡量指标,选取6个大方向31个指标来测量援疆效果满意度.通过南疆三地州进行实地问卷调查获得数据为样本,采用因子分析方法确定二级指标及三级指标的权重,进行对援疆政策效果满意度综合评价.研究结论是南疆居民对援疆效果的满意度总得分接近70分,说明总体满意度较高,其中满意度最高的为收入及补贴,排在第一位,排在末尾的就是教育领域,排在第二位的是住房建设,而基层服务的满意度仅仅高于教育领域,排在第五位.排在第三位的就是医疗,第四位才是居民出行为核心内容的基础设施建设.从而为援疆政策效果满意度优化,解决存在的问题,全面改善援疆政策效果提出政策建议.  相似文献   

9.
We consider an optimal distributed control problem in a planar convex domain with smooth boundary and a small parameter at the highest derivatives of an elliptic operator. The zero Dirichlet condition is given on the boundary of the domain, and the control is included additively in the inhomogeneity. The set of admissible controls is the unit ball in the corresponding space of square integrable functions. Solutions of the obtained boundary value problems are considered in the generalized sense as elements of a Hilbert space. The optimality criterion is the sum of the squared norm of the deviation of the state from a given state and the squared norm of the control with a coefficient. This structure of the optimality criterion makes it possible to strengthen, if necessary, the role of either the first or the second term of the criterion. In the first case, it is more important to achieve the desired state, while, in the second case, it is preferable to minimize the resource consumption. We study in detail the asymptotics of the problem generated by the sum of the Laplace operator with a small coefficient and a first-order differential operator. A feature of the problem is the presence of the characteristics of the limit operator which touch the boundary of the domain. We obtain a complete asymptotic expansion of the solution of the problem in powers of the small parameter in the case where the optimal control is an interior point of the set of admissible controls.  相似文献   

10.
The crosslinking of unsaturated polyester was studied by using an experiment and a mathematical model of the process. Temperature–time profiles were recorded in the centre of the sample inside the mould at the outer wall of the cylindrical copper mould, and in the bulk of the heated air bath. A numerical model was constructed by taking into account the heat transferred by convection from the air to the mould surface and the heat transferred by conduction through the resin, as well as the heat generated by the crosslinking reaction. The convection heat transfer coefficient was determined in independent experiments with the empty copper mould. Introduction of the carbon base filler reduced the amount of heat generated in the composite due to the less reactive component in the composite. As a result, it lowered the temperature of the resin. By recording the temperature-time and the degree of crosslinking time profiles developed within the sample extensive knowledge of the process can be obtained. The effects of the convection heat transfer on the rate of mould heating, and the conduction heat transfer through the mould as well as the internal heat generated by the crosslinking reaction are visibly shown, despite a complexity of the process.  相似文献   

11.
12.
针对决策信息以区间数、直觉模糊数和语言变量给出的混合多属性决策问题,提出了基于模糊熵-熵权法的混合多属性决策方法。通过规范化的方法把区间数转化为直觉模糊数,建立了直觉模糊数与语言变量的对应关系,把混合多属性决策信息统一在同一决策框架下;然后利用熵权法确定属性的客观权重区间,通过求解属性信息模糊熵最小的线性规划模型得到属性客观权重;再与主观赋权方法相结合确定属性的组合权重;最后应用相对熵排序法得到方案的最终排序结果。算例分析表明方法的可行性和实用性。  相似文献   

13.
In the framework of the zeta-regularization approach, we consider the polarization of the scalar field vacuum with nontrivial boundary conditions originating from electrodynamics in the presence of a conducting infinitely thin boundary layer. Boundary conditions of the first type correspond to the case where the field is continuous on the boundary while its derivative has a jump proportional to the boundary value of the field. Boundary conditions of the second type correspond to the case where the field derivative is continuous on the boundary but the field itself has a jump proportional to the field derivative on the boundary. We explicitly obtain the zeta function of the scalar field Laplace operator with the above boundary conditions and calculate all the heat kernel coefficients. We obtain an expression for the energy of the scalar field vacuum fluctuations.  相似文献   

14.
朱卫平  黄黔 《应用数学和力学》2002,23(12):1241-1254
利用(Ⅰ)提出的旋转壳在子午面内整体弯曲的几何非线性摄动有限元法分析了波纹管在纯弯矩、横向力作用下的刚度和应力分布。首先,将其中的一阶摄动解(线性解)和作者曾经提出的中细环壳一般解、初参数积分解进行了比较,以及与他人的实验、有限元分析进行了比较,表明本法具有良好的精度和可靠性,且如(Ⅰ)所指出的那样,波纹管子午线曲率的突变不妨碍一般直线单元的应用。然后,讨论了波纹管的非线性特征,结果显示,波纹管的非线性效应主要来自其环板,而且环板愈宽非线性效应愈大,例如,C型波纹管相当于环板宽度为零的U型波纹管,因而其非线性效应几乎可以忽略不计。此外,在纯弯矩作用下,依线性解波纹管各个波的应力分布是相同的,而依非线解各个波的应力分布是不相同的,但对于常见的波纹管,在工程精度内线性解是有效的。  相似文献   

15.
A direct error vector analysis of inverse heat conduction problem is presented to detect the measured noise. Based on the reverse matrix approach that the inverse problem is solved directly in a linear domain, and the error vector is formulated from the difference between the measured temperature and the estimated temperature. There is no prior knowledge on the exact solution while the error vector is constructed. The error vector is used to investigate the consistence of the measured data in the domain and lead to detect the noise data. Furthermore, the proper number of the undetermined variable is able to suggest based on the mean value of the error vector and the value of the condition number of the reverse matrix. In the first example, a test problem with the measurement noise is presented. The estimated result is influent by the noise globally. The result shows that the value of error vector is changed significantly at the coordinate of the measurement noise appeared. In other words, the error vector analysis is able to identify the noise data. In the second example, the proper number of series expansion terms is investigated. From the result, it shows that the number of expansion terms with the small mean value and condition number can better approximate to the unknown condition. It means that the proposed method is able to suggest a proper number of expansion terms when the function of the recovered boundary is unknown.  相似文献   

16.
针对公司与农户合作时存在违约问题,本文基于委托代理理论构建了由风险规避的公司和农户组成的“公司+农户”租赁模型。分析了在信息不对称条件下,该模式的激励系数与租金的制定策略,并通过数值仿真探讨了各参数变化对激励系数和租金的影响。研究结果表明公司给予农户的分成比例越高,农户生产努力水平越高,同时公司前期支付给农户的租金越低,后期给予农户的分成比例越高。此外,激励系数随公司风险规避系数、农户生产能力的增加而增加,随农户风险规避系数、外生不确定因素的增加而减小;租金随农户风险规避系数、农户生产能力的增加而增加,随公司风险规避系数、外生不确定因素的增加而减小,并且在满足一定条件时,存在最优的市场价格使得租金最低。  相似文献   

17.
中国工会和企业之间的关系可以分为激烈对抗、消极追随和团结协作三种关系模式。论文构建多主体仿真模型,研究不同企业规模下的三种工会-企业关系模式对企业绩效的影响,探讨不同规模企业绩效的动态演化机制。结果表明:企业规模越小,三种关系模式下员工投入水平和企业绩效波动频率越高、幅度越大,企业越不稳健;企业规模越大,消极追随模式下企业绩效初期出现短暂高绩效的时滞越久;相同规模时,团结协作模式下的企业绩效优于消极追随模式,激烈对抗模式下的企业绩效表现最弱;企业规模越大,团结协作模式的优越性越突出。研究结论可以为工会-企业关系的发展和企业绩效提升提供建设性启示。  相似文献   

18.
This article discusses the relationship between the informal ties of the employees within an organization and their absentee rates.~To explain this relationship, the assumption is made that within a department, a more or less stable norm concerning illegal absenteeism exits, and that the strength of this norm is related to the tightness of the informal relationships between the employees: the more consensus on the absentee norm, irrespective of the degree of tolerance, the more cohesive this department. Furthermore, according to the fairness theory of Adams (1965), a relationship between the tightness of the informal relations, the norm concerning illegal absenteeism and the absentee rate is expected: the more cohesive, the higher the effect of the group norm on the short-term absentee rate. Network data of 62 employees of eight comparable teams within a housing corporation were collected by means of a questionnaire, and combined with data on the absentee rates of the employees. The data supported the hypotheses concerning the relationship between the group norm, the tightness of the informal relations and the short-term absentee rates of the employees within a department.  相似文献   

19.
The variational process is established and applied to the development of the second variation for the free-final-time optimal control problem. First, it is shown that, given a change in the control (the independent variable), the change in the state (the dependent variable) consists of all orders of the change in the control. Hence, the change in the state is a total change. This implies that variations of dependent variations exist. Next, the variational relationship between time-constant and time-free variations is developed, and the formula for taking the variation of an integral is presented. The results are used to derive the second variation following three different approaches: taking the variation of the first variation after performing the integration by parts; taking the variation of the first variation before performing the integration by parts; and using the Taylor series approach. The ability to get the same result requires the existence of the total change in the state or of the variation of the state variation. Finally, if the nominal path is not an extremal, this process gives extra terms in the second variation.  相似文献   

20.
This paper defines a two-directional difference system and constructs the projection matrix. Then the original system is projected into the smaller system, and we discuss its moment-matching properties. Next we define the dual system, and discuss the dual relation between the dual system and the original system. Then we can construct the projection matrix with the above mentioned dual relation, and project the dual system into the respectively smaller system, hence derive the moment-matching properties. Finally synthesizing the above two moment-matching properties we obtain the main results that the number of moments matched is twice as much as the number of the generating terms of the constructed projection subspace. We apply this result to the two-sided model order reduction for parameter time delay system, and obtain the result that the reduced system can preserve twice moments as the number of the generating terms of the constructed projection subspace. Finally we derive an algorithm to compute the basis of the subspace involved in the reduction process.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号