Scheduling linear deteriorating jobs with rejection on a single machine

We consider several single machine scheduling problems in which the processing time of a job is a linear function of its starting time and jobs can be rejected by paying penalties. The objectives are to minimize the makespan, the total weighted completion time and the maximum lateness/tardiness plus the total penalty of the rejected jobs. We show that these problems are NP-hard, and design algorithms based on dynamic programming (including pseudo-polynomial time optimal algorithms and fully polynomial time approximation schemes) to solve them.     

Complexity of single machine scheduling subject to nonnegative inventory constraints

This paper focuses on single machine scheduling subject to inventory constraints. Jobs either add items to an inventory or remove items from that inventory. Jobs that have to remove items cannot be processed if the required number of items is not available. We consider scheduling problems on a single machine with the minimization of the total weighted completion time, the maximum lateness, and the number of tardy jobs, respectively, as objective and determine their computational complexity. Since the general versions of our problems turn out to be strongly NP-hard, we consider special cases by assuming that different jobs have certain parameter values in common. We determine the computational complexity for all special cases when the objective is either to minimize total completion time or to minimize maximum lateness and for several special cases when the objective is either to minimize total weighted completion time or to minimize the number of tardy jobs.     

具有不可用区间且工件可拒绝下的单机重新排序问题的近似方案

本文考虑了机器具有不可用区间且工件可拒绝下的单机重新排序问题,在该问题中,给定一个工件集需在一台机器上加工,每个工件有自己的加工时间和权重,且对该工件集目标函数为极小化总加权完工时间的排序计划已给定,根据该排序计划中每个工件的完工时间已确定每个工件的承诺交付时间。然而,在工件正式开始加工前,原计划用于加工的某段时间区间因临时用于检修机器而导致机器在该时间区间不再可用,需要对工件重新排序。为了确保在新的重新排序中,工件的延误成本不致太大,决策者可以选择拒绝部分工件,但需支付相应的拒绝费用。任务是确定接受工件集和拒绝工件集,并将接受的工件在考虑机器具有不可用区间的条件下重新排序使得接受工件集的总加权完工时间,总拒绝费用及赋权最大延误之和最小。该问题是NP-困难的,对此给出了伪多项式时间动态规划精确算法,利用稀疏技术设计了完全多项式时间近似方案。     

工件延误和可拒绝下的单机重新排序问题的近似方案

研究工件延误产生干扰且延误工件可拒绝下的单机重新排序问题。在该问题中,给定计划在零时刻到达的一个工件集需在一台机器上加工,工件集中的每个工件有它的加工时间和权重,在工件正式开始加工前,按照最短赋权加工时间优先的初始排序已经给定,目标函数是极小化赋权完工时间和,据此每个工件的承诺交付截止时间也给定。然而,在工件正式开始加工时,工件集中的部分工件由于延误不能按时到达,这对初始排序的执行产生了干扰,所以需要对初始排序进行调整,即重新排序。为了保证服务水平,允许对延误工件拒绝加工,但需支付相应的拒绝费用。调整后的重新排序的目标是在保证接受工件集中工件的最大延误不超过给定的上界的约束下,使得接受工件集的赋权完工时间和,拒绝工件集的拒绝费用和以及接受工件集中工件的最大延误的赋权惩罚费用之和达到极小。对该问题,设计了一个伪多项式时间动态规划精确算法,并利用稀疏技术得到了一个完全多项式时间近似方案。     

Single-machine scheduling problems with time and position dependent processing times

We consider single-machine scheduling problems with time and position dependent job processing times. In many industrial settings, the processing time of a job changes due to either job deterioration over time or machine/worker’s learning through experiences. In the models we study, each job has its normal processing time. However, a job’s actual processing time depends on when its processing starts and how many jobs have completed before its start. We prove that the classical SPT (Shortest Processing Time) rule remains optimal when we minimize the makespan or the total completion time. For problems of minimizing the total weighted completion time, the maximum lateness, and the discounted total weighted completion time, we present heuristic sequencing rules and analyze the worst-case bounds for performance ratios. We also show that these heuristic rules can be optimal under some agreeable conditions between the normal processing times and job due dates or weights.     

带有退化效应和序列相关运输时间的排序问题

考虑带有退化效应和序列相关运输时间的单机排序问题. 工件的加工时间是其开工时间的简单线性增加函数. 当机器单个加工工件时, 极小化最大完工时间、(加权)总完工时间和总延迟问题被证明是多项式可解的, EDD序对于极小化最大延迟问题不是最优排序, 另外, 就交货期和退化率一致情形给出了一最优算法. 当机器可分批加工工件时, 分别就极小化最大完工时间和加权总完工时间问题提出了多项式时间最优算法.     

Some single-machine scheduling problems with actual time and position dependent learning effects

In this paper we study some single-machine scheduling problems with learning effects where the actual processing time of a job serves as a function of the total actual processing times of the jobs already processed and of its scheduled position. We show by examples that the optimal schedules for the classical version of problems are not optimal under this actual time and position dependent learning effect model for the following objectives: makespan, sum of kth power of the completion times, total weighted completion times, maximum lateness and number of tardy jobs. But under certain conditions, we show that the shortest processing time (SPT) rule, the weighted shortest processing time (WSPT) rule, the earliest due date (EDD) rule and the modified Moore’s Algorithm can also construct an optimal schedule for the problem of minimizing these objective functions, respectively.     

无限批量调度中最小化加权完工时间和问题的一个线性时间近似方案

本文考虑n个工件的无限批量机器调度问题．一台机器可以同时加工B≥n个工件．每个工件具有一个正权因子、一个释放时间和一个加工时间．一个批次的加工时间是该批次所包含所有工件的加工时间的最大者．在同一批次中加工的工件有相同的完工时间，即它们的共同开始时间加上该批次的加工时间．对于最小化加权完工时间和问题，本文给出了第一个多项式时间近似方案(PTAS)．对任意给定精度，该算法的运行时间为线性的．     

Scheduling time-dependent jobs under mixed deterioration

We consider a new model of time-dependent scheduling. A set of deteriorating jobs has to be processed on a single machine which is available starting from a non-zero time. The processing times of some jobs from this set are constant, while other ones are either proportional or linear functions of the job starting times. The applied criteria of schedule optimality include the maximum completion time, the total completion time, the total weighted completion time, the maximum lateness and the number of tardy jobs. We delineate a sharp boundary between computationally easy and difficult problems, showing polynomially solvable and NP-hard cases.     

同时具有学习效应和退化效应的单机排序问题

本文给出了一种同时具有一般化学习效应和退化效应的单机排序模型。在此模型中,工件的实际加工时间既与工件所在位置又与其开工时间有关,且工件在加工之后具有一个配送时间。其中学习效应是工件所在位置的函数,退化效应是工件开工时间的函数。证明了极小化最大完工时间和极小化总完工时间问题是多项式可解的,在满足一定的条件下,极小化加权总完工时间和极小化最大延误问题也是多项式可解的。推广了一些已有文献中的结论。     

一致条件下具学习因子的几个单机排序问题

n个工件需在同台机器上依次加工，工件j,j=1，2，…，n所需的正常加工时间为pj,如在某序中工件j第r个加工，则机器对其实际加工的时间为pjr^α，其中α≤0为一学习因子．要求适当排列这n个工件的加工顺序，使某目标函数达最小．本文对加权完工时间之和，最大迟后，延误工件数这三个目标函数，给出了在相应的一致条件下，对应的WSPT规则，EDD规则，修正Moore-Hodgson算法可获最优序，并估计了在一般情况下由该三规则所获序的误差．     

Single machine scheduling with exponential learning functions

In this paper we consider the single machine scheduling problem with exponential learning functions. By the exponential learning functions, we mean that the actual job processing time is a function of the total normal processing times of the jobs already processed. We prove that the shortest processing time (SPT) rule is optimal for the total lateness minimization problem. For the following three objective functions, the total weighted completion time, the discounted total weighted completion time, the maximum lateness, we present heuristic algorithms according to the corresponding problems without exponential learning functions. We also analyse the worst-case bound of our heuristic algorithms. It also shows that the problems of minimizing the total tardiness and discounted total weighted completion time are polynomially solvable under some agreeable conditions on the problem parameters.     

The constrained minimum weighted sum of job completion times problem

We consider the problem of minimizing the weighted sum of job completion times on a single machine (subject to certain job weights) with an additional side constraint on the weighted sum of job completion times (with respect to different job weights). This problem is NP-hard, and we provide a polynomial time approximation scheme for this problem. Our method is based on Lagrangian relaxation mixed with carefully guessing the positions of certain jobs in the schedule. An earlier version of this paper appeared in the Proceedings of the 10th International IPCO Conference.     

Single machine scheduling with exponential sum-of-logarithm-processing-times based learning effect

In this paper we consider the single machine scheduling problems with exponential sum-of-logarithm-processing-times based learning effect. By the exponential sum-of-logarithm-processing-times based learning effect, we mean that the processing time of a job is defined by an exponent function of the sum of the logarithm of the processing times of the jobs already processed. We consider the following objective functions: the makespan, the total completion time, the sum of the quadratic job completion times, the total weighted completion time and the maximum lateness. We show that the makespan minimization problem, the total completion time minimization problem and the sum of the quadratic job completion times minimization problem can be solved by the smallest (normal) processing time first (SPT) rule, respectively. We also show that the total weighted completion time minimization problem and the maximum lateness minimization problem can be solved in polynomial time under certain conditions.     

Flow shop scheduling problems with deteriorating jobs under dominating machines

This paper considers the general, no-wait and no-idle flow shop scheduling problems with deteriorating jobs. By a deteriorating job we mean that the processing time is an increasing function of its execution starting time. A linear deterioration function is assumed and some dominating relationships between machines can be satisfied. It is shown that for the problems to minimize the makespan or the weighted sum of completion time, polynomial algorithms still exist, although these problems are more complicated than the classical ones. When the objective is to minimize the maximum lateness, the solutions of a classical version may not hold.     

Flow shop scheduling jobs with position-dependent processing times

The paper is devoted to some flow shop scheduling problems, where job processing times are defined by functions dependent on their positions in the schedule. An example is constructed to show that the classical Johnson's rule is not the optimal solution for two different models of the two-machine flow shop scheduling to minimize makespan. In order to solve the makespan minimization problem in the two-machine flow shop scheduling, we suggest Johnson's rule as a heuristic algorithm, for which the worst-case bound is calculated. We find polynomial time solutions to some special cases of the considered problems for the following optimization criteria: the weighted sum of completion times and maximum lateness. Some furthermore extensions of the problems are also shown.     

Minimizing weighted mean absolute deviation of job completion times from their weighted mean

We address a single-machine scheduling problem where the objective is to minimize the weighted mean absolute deviation of job completion times from their weighted mean. This problem and its precursors aim to achieve the maximum admissible level of service equity. It has been shown earlier that the unweighted version of this problem is NP-hard in the ordinary sense. For that version, a pseudo-polynomial time dynamic program and a 2-approximate algorithm are available. However, not much (except for an important solution property) exists for the weighted version. In this paper, we establish the relationship between the optimal solution to the weighted problem and a related one in which the deviations are measured from the weighted median (rather than the mean) of the job completion times; this generalizes the 2-approximation result mentioned above. We proceed to give a pseudo-polynomial time dynamic program, establishing the ordinary NP-hardness of the problem in general. We then present a fully-polynomial time approximation scheme as well. Finally, we report the findings from a limited computational study on the heuristic solution of the general problem. Our results specialize easily to the unweighted case; they also lead to an approximation of the set of schedules that are efficient with respect to both the weighted mean absolute deviation and the weighted mean completion time.     

Two-agent single-machine scheduling problems under increasing linear deterioration

A new scheduling model in which both two-agent and increasing linear deterioration exist simultaneously is investigated in this paper. The processing time of a job is defined as an increasing linear function of its starting time. Two agents compete to perform their respective jobs on a common single machine and each agent has his own criterion to optimize. We introduce an increasing linear deterioration model into the two-agent single-machine scheduling, where the goal is to minimize the objective function of the first agent with the restriction that the objective function of the second agent cannot exceed a given upper bound. We study two scheduling problems with the different combinations of two agents’ objective functions: makespan, maximum lateness, maximum cost and total completion time. We propose the optimal properties and present the optimal polynomial time algorithms to solve the scheduling problems, respectively.     

Single-machine scheduling with deteriorating functions for job processing times

In many realistic scheduling settings a job processed later consumes more time than when it is processed earlier – this phenomenon is known as scheduling with deteriorating jobs. In the literature on deteriorating job scheduling problems, majority of the research assumed that the actual job processing time of a job is a function of its starting time. In this paper we consider a new deterioration model where the actual job processing time of a job is a function of the processing times of the jobs already processed. We show that the single-machine scheduling problems to minimize the makespan and total completion time remain polynomially solvable under the proposed model. In addition, we prove that the problems to minimize the total weighted completion time, maximum lateness, and maximum tardiness are polynomially solvable under certain agreeable conditions.     

Rescheduling with new orders and general maximum allowable time disruptions

We study the rescheduling with new orders on a single machine under the general maximum allowable time disruptions. Under the restriction of general maximum allowable time disruptions, each original job has an upper bound for its time disruption (regarded as the maximum allowable time disruption of the job), or equivalently, in every feasible schedule, the difference of the completion time of each original job compared to that in the pre-schedule does not exceed its maximum allowable time disruption. We also consider a stronger restriction which additionally requires that, in a feasible schedule, the starting time of each original job is not allowed to be scheduled smaller than that in the pre-schedule. Scheduling objectives to be minimized are the maximum lateness and the total completion time, respectively, and the pre-schedules of original jobs are given by EDD-schedule and SPT-schedule, respectively. Then we have four problems for consideration. For the two problems for minimizing the maximum lateness, we present strong NP-hardness proof, provide a simple 2-approximation polynomial-time algorithm, and show that, unless \(\text {P}= \text {NP}\), the two problems cannot have an approximation polynomial-time algorithm with a performance ratio less than 2. For the two problems for minimizing the total completion time, we present strong NP-hardness proof, provide a simple heuristic algorithm, and show that, unless \(\text {P}= \text {NP}\), the two problems cannot have an approximation polynomial-time algorithm with a performance ratio less than 4/3. Moreover, by relaxing the maximum allowable time disruptions of the original jobs, we present a super-optimal dual-approximation polynomial-time algorithm. As a consequence, if the maximum allowable time disruption of each original job is at least its processing time, then the two problems for minimizing the total completion time are solvable in polynomial time. Finally, we show that, under the agreeability assumption (i.e., the nondecreasing order of the maximum allowable time disruptions of the original jobs coincides with their scheduling order in the pre-schedule), the four problems in consideration are solvable in polynomial time.