一种裂纹梁振动响应分析和近似方法

本文以线弹簧模型为基础提出了一种近似分析裂纹梁振动响应的方法。把该方法同Ｅｕｌｅｒ－Ｂｅｒｎｏｕｌｌｉ梁理论，模态分析方法以及断裂力学原理等结合起来运用。导出裂纹梁振动的特征方程。     

非均匀变厚度梁的动力响应的一般解

在本文中提出一个新方法——阶梯折算法来研究在任意载荷下任意非均匀和任意变厚度伯努利-欧拉梁的动力响应问题.研究了自由振动和强迫振动.新方法需要将区间离散为一定数目的元素,每个元素可看作是均匀和等厚度的.因此均匀、等厚度梁的一般解可在每个元素上应用.然后用初参数表示的整个梁的一般解使之满足相邻二元素间的物理和几何连续条件,这样就可以得到解析形式的自由振动的频率方程和解析形式的强迫振动的最终解,它化为求解二元线性代数方程,与离散元素的数目无关.现在的方法可推广应用至任意非均匀及任意变厚度有粘滞性和其他种类的梁以及其他结构元件问题上去.     

基于广义函数空间的不连续梁振动分析

首先运用广义函数建立了轴向力作用下含任意不连续点的弹性基础Euler(欧拉)梁的自由振动的统一微分方程.不连续点的影响由广义函数(Dirac delta函数)引入梁的振动方程.微分方程运用Laplace变换方法求解;与传统方法不同的是,该文方法求得的模态函数为整个不连续梁的一般解.由于模态函数的统一化以及连续条件的退化,特征值的求解得到了极大地简化.最后,以梁-质量块模型和轴向力作用下弹性基础裂纹梁模型为例验证了该文方法的正确性与有效性.     

时滞速度反馈作用下弹性梁的主共振分析

采用时滞速度反馈控制策略对轴力作用下的弹性梁进行振动控制.根据Newton第二定律建立压电耦合弹性梁的非线性振动控制模型,运用直接法得到时滞反馈作用下弹性梁主共振的一阶近似解,得出系统响应与控制参数的关系.结果表明,主共振的响应存在多解和跳跃现象,调节控制增益和时滞值可以有效抑制大幅振动.     

轴向运动梁的横向振动分析

论述了轴向运动梁横向振动问题以及研究轴向运动梁横向振动问题的方法,指出对轴向运动梁横向振动问题研究中存在的一些错误并进行了更正.针对一端可看作固定边界条件的轴向运动悬臂梁,基于连续体的模态叠加法,推导出含自重效应的轴向运动梁动力响应的计算公式,进行实例计算,并对计算结果进行了详细的讨论,得出影响轴向运动梁振动响应的因素主要有速度和运动方向.     

海洋立管双模态动力学分岔分析

为研究剪切流作用下顶张力立管的涡激振动响应规律,将立管简化为Euler-Bernoulli梁模型,用van der Pol尾流振子描述流体的作用,建立了立管涡激振动的非线性动力学模型.基于二阶Galerkin模态离散所得常微分方程组,采用谐波平衡法、Poincaré映射方法和Lyapunov指数法分析系统响应特点.研究结果表明:随着流速的增加,系统响应在周期运动和概周期运动间多次转换,其中周期解区域对应系统的涡激共振区;谐波平衡法结果能够较准确地预测涡激共振区周期解的振幅和频率,以及非涡激共振区概周期解的主要频率成分.     

具有分数导数本构关系的粘弹性Timoshenko梁的静动力学行为分析

利用粘弹性材料的三维分数导数型本构关系,建立粘弹性Timoshenko梁的静、动力学行为研究的数学模型;分析Timoshenko梁在阶跃载荷作用下的准静态力学行为,得出了问题的解析解,考察了一些材料参数对梁的挠度的影响。基于模态函数讨论了粘弹性Timoshenko梁在横向简谐激励作用下的动力响应,并考察了剪切和转动惯性对梁振动响应的影响。     

多层简化应变梯度Timoshenko梁的变分原理分析

材料特征尺寸与其内禀尺寸相当时,材料表现出明显的尺寸效应.基于简化的应变梯度理论,通过半逆法,本文给出多层简化应变梯度Timoshenko梁的变分原理,通过最小总势能原理导出系统的边界条件并对其低阶和高阶边界条件进行讨论,随后给出简支梁系统屈曲载荷和振动频率的Rayleigh(瑞利)解.通过双层梁系统的振动分析算例得到内禀尺寸、长径比等因素对梁系统振动频率的影响.该文构造的Rayleigh解有望对其他数值方法,如有限元法、传递矩阵法等,提供一定的参考和对比.     

一维六方准晶简支梁的自由振动

采用不同高阶剪切变形理论研究一维六方准晶梁的自由振动问题,应用哈密顿原理,推导了一维六方准晶梁的自由振动控制微分方程.采用Navier法获得了一维六方准晶简支梁自由振动的精确解,并将不考虑相位子场所求解结果与已有解进行比较,验证求解结果的有效性.最后研究材料尺度对一维六方准晶梁固有频率的影响.     

粘弹性梁的动力响应

本文利用Voigt力学模型对粘弹性简支梁进行动力分析,得到了梁的自由振动与强迫振动的若干解析解的表达式.并与S.Timoshenko给出的弹性简支梁的相应的结论进行了比较,指出了弹性动力分析的局限性.最后给出了二个数值例子.     

Forced Vibration Analysis of Euler-Bernoulli Double-Beam Systems by Means of Green’s Functions北大核心CSCD

Double-curved-beam (DCB) systems are usually seen in many engineering fields. Compared to straight double-beam systems, DCB systems are more efficient in noise and vibration control problems. To obtain closed-form solutions of steady-state forced vibrations of DCB systems, the classical Euler-Bernoulli curved beam (ECB) model was employed to model vibration equations for the DCB systems. Green’s functions and the Laplace transform methods were used to get the closed-form solutions to the vibration equations for the DCB systems. These solutions apply to arbitrary boundary conditions. Numerical tests were conducted to verify the present solutions with related results from previous literatures. Effects of some important geometric and physical parameters on vibration responses and the interaction between the elastic layer stiffness and the DCB system, were discussed. The results show that, the DCB system will degenerate to a straight double-beam system when the 2 radii approach infinity, moreover, the DCB system can be simplified as one comprising a straight beam and a curved beam. © 2023 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

Free vibration analysis of cracked composite beams subjected to coupled bending–torsion loads based on a first order shear deformation theory

In this paper, free vibration analysis of cracked composite beam subjected to coupled bending–torsion loading is presented. The composite beam is assumed to have an open edge crack of length a. A first order shear deformation theory is applied to count for the effect of shear deformations on natural frequencies as well as the effect of coupling in torsion and bending modes of vibration. Governing equations and boundary conditions are derived using Hamilton principle. Local flexibility matrix is used to obtain the additional boundary conditions of the beam in cracked area. After obtaining the governing equations and boundary conditions, generalized differential quadrature (GDQ) method is applied to solve the obtained eigenvalue problem. Finally, some numerical results of beams with various boundary conditions and different fiber orientations are given to show the efficiency of the method. In addition, to study the effect of shear deformations, numerical results of the current model are compared with previously given results in which shear deformations were neglected.     

Analytical study on dynamic responses of a curved beam subjected to three-directional moving loads

Considering the warping resistance, inertia force and moving three-directional loads, a more comprehensive set of governing equations for vertical, torsional, radial and axial motions of the curved beam are derived. The analytical solutions for vertical, torsional, radial and axial responses of the curved beam subjected to three-directional moving loads are obtained, using the Galerkin method to discretize the partial differential equations and the modal superposition method to decouple the ordinary differential equations. The analytical results are compared with the numerical integration and a published work to verify the validity of the proposed solutions. Effects of Galerkin truncation terms and damping ratio on solution convergence are also discussed. Considering first-mode and higher-mode truncation respectively, the conditions of resonance and cancellation are analyzed for vertical, torsional, radial and axial motions of the curved beam. Taking a curved bridge under passage of a vehicle as an example, the influences of system parameters, such as vehicle speed, braking acceleration, bridge curve radius, bridge span and bridge deck elastic modulus, on bridge midpoint vibration are explored. The proposed approach and results may be beneficial to enhance understanding the three-directional vehicle-induced dynamic responses of curved bridges. It is shown that when the axial motion, or the multiple moving loads are involved, the first-order truncation are not accurate enough and one should use higher-mode truncation to study the responses of curved beams. In addition, it is necessary to consider damping in the vibration study of curved beams.     

Nonlinear dynamics of high-dimensional models of in-plane and out-of-plane vibration in an axially moving viscoelastic beam

Nonlinear dynamics of high-dimensional models of an axially moving viscoelastic beam with in-plane and out-of-plane vibration with combined parametric and forcing excitations are investigated by the incremental harmonic balance (IHB) method in this paper. Governing equations of transverse in-plane and out-of-plane and longitudinal vibration are obtained basing on the Hamilton's principle. The Galerkin method is used to separate time variable and spatial variable to obtain a set of multi-order differential equations. The IHB method with the fast Fourier transform (FFT) is used to solve periodic response of high-dimensional models of the beam for which convergent mode is reached. Stability of the steady-state periodic solutions is analyzed using the multivariable Floquet theory. Particular attention is paid to in-plane and out-of-plane vibration on convergent mode of the beam with combined parametric and forcing excitations. Multiple solutions are observed, and jump phenomena between in-plane and out-of-plane vibration with different transverse cross sections are discovered.     

Natural frequencies of a functionally graded cracked beam using the differential quadrature method

The present work is concerned with the free vibration analysis of an elastically supported cracked beam. The beam is made of a functionally graded material and rested on a Winkler–Pasternak foundation. The line spring model is employed to formulate the problem. The method of differential quadrature is applied to solve it. The obtained results agreed with the previous similar ones. Further, a parametric study is introduced to investigate the effects of the geometric and elastic characteristics of the problem on the values of natural frequencies and mode shape functions.     

末端质量作用下变长度轴向运动梁的振动特性

对带集中质量,变长度(或速度)轴向运动梁的振动特性采用两种精确方法求解.首先,对变长度轴向运动Euler(欧拉)梁横向自由振动方程进行化简,通过复模态分析得到本征方程,并在有集中质量的边界条件下得到频率方程,用数值方法求解固有频率和模态函数.然后,采用有限元方法建立运动梁自由振动的方程,求解矩阵方程得到复特征值和复特征向量,结合形函数得到复模态位移.最后,将两种方法的计算结果进行了分析和对比.数值算例的结果表明:不同的轴向运动速度和集中质量对变长度轴向运动梁的振动特性有显著影响,两种计算方法的结果接近且均有效.     

Predicting nonlinear dynamic response of internal cantilever beam system on a steadily rotating ring

This paper is focused on nonlinear dynamic response of internal cantilever beam system on a steadily rotating ring via a nonlinear dynamic model. The analytical approximate solutions to the oscillation motion are obtained by combining Newton linearization with Galerkin's method. Numerical solutions could be obtained by using the shooting method on the exact governing equation. Compared with numerical solutions, the approximate analytical solutions here show excellent accuracy and rapid convergence. Two different kinds of oscillating internal cantilever beam system on a steadily rotating ring are investigated by using the analytical approximate solutions. These include symmetric vibration through three equilibrium points, and asymmetric vibration through the only trivial equilibrium point. The effects of geometric and physical parameters on dynamic response are useful and can be easily applied to design practical engineering structures. In particular, the ring angular velocity plays a significant role on the period and periodic solution of the beam oscillation. In conclusion, the analytical approximate solutions presented here are sufficiently precise for a wide range of oscillation amplitudes.     

Vibration of axially moving hyperelastic beam with finite deformation

In this paper, we study the vibration of an axially moving hyperelastic beam under simply supported condition. The kinematic of the axially moving beam have been described by Eulerian-Lagrangian formulation. In continuum mechanics frame, the finite deformation formula and a higher order shear deformation beam theory are applied to describe the deformation of the axially moving hyperelastic beam. In these formulas the material parameter, shear deformation and the geometric non-linearity have been taken into account. Through the Hamilton principle, the governing equations of nonlinear vibration are obtained, where the transverse vibration is coupled with the longitudinal vibration. When the velocity is a constant, the critical speed and natural frequencies are determined by solving the corresponding linear equations. Meantime, effects of the geometrical and material parameters on the critical speed and natural frequencies have been investigated. Comparisons among the critical velocities of the hyperelastic and Euler linear beam are also made. The results show that the critical velocity of hyperelastic beam is larger than that of linear Euler–Bernoulli beam. For the natural frequencies, we have the same conclusions. Lastly, by the multiple scales method, the leading order analytical solutions of the equilibrium state of axially moving hyperelastic beam in the supercritical regime are obtained. Furthermore the amplitudes of analytical solutions of the hyperelastic beam have been compared with that of linear Euler–Bernoulli beam. The effects of the material and geometrical parameters on the asymptotic solutions and the amplitude has been analyzed.     

压电弯曲元的夹层梁解析模型

压电弯曲元是一类传感和作动器件,已得到广泛的应用．基于一阶剪切变形理论发展了压电弯曲元夹层梁解析模型,对梁截面采用统一转角并将耦合电势沿厚度的分布假设为二次函数,进一步修正了横向剪应变对电位移的影响．以弯曲元简支梁自由振动为例进行数值分析,解析模型解与二维精确解相比具有良好的精度,为分析弯曲元动力机电响应提供了良好的解析模型．