Boundary-Value Problems of the Theory of Thin and Nonthin Orthotropic Shells with Account of Nonlinearly Elastic Properties and Low Shear Rigidity of Composite Materials

The basic geometric and physical relations and resolving equations of the theory of thin and nonthin orthotropic composite shells with account of nonlinear properties and low shear rigidity of their materials are presented. They are derived based on two theories, namely the theory of anisotropic shells employing the Timoshenko or Kirchhoff-Love hypothesis and the nonlinear theory of elasticity and plasticity of anisotropic media in combination with the Lagrange variational principle. The procedure and algorithm for the numerical solution of nonlinear (linear) problems are based on the method of successive approximations, the difference-variational method, and the Lagrange multiplier method. Calculations of the stress-strain state for a spherical shell with a circular opening loaded with internal pressure are presented. The effect of transverse shear strains and physical nonlinearity of the material on the distribution of maximum deflections and circumferential stresses in the shell, obtained according to two variants of the shell theories, is studied. A comparison of the results of the problem solution in linear and nonlinear statements with and without account of the shell shear strains is given. The numerical data obtained for thin and nonthin (medium thick) composite shells are analyzed.     

On the hyperbolicity of the period-doubling fixed point

We give a new proof of the hyperbolicity of the fixed point for the period-doubling renormalization operator using the local dynamics near a semi-attractive fixed point (in a Banach space) and the theory of holomorphic motions. We also give a new proof of the exponential contraction of the Feigenbaum renormalization operator in the hybrid class of the period-doubling fixed point: our proof uses the non-existence of invariant line fields in the period-doubling tower (C. McMullen), the topological convergence (D. Sullivan), and a new infinitesimal argument.

     

颤振分析中的特征值排序问题

颤振分析中判断颤振临界速度的重要依据是系统V-g和V-f图,即系统特征值随参数的变化曲线.在几乎所有商用软件及自编程序的输出结果中,有时会出现所谓的"窜支"现象,这给颤振临界速度和颤振穿越分支及耦合形式的判断带来很大不便.通过隐函数定理可以证明,除重特征值点以外,系统特征值连续依赖于系统参数变化.依据多元向量值函数连续性,建立对特征值的排列算法,给出系统特征根轨迹的正确曲线,再输出V-g和V-f图数据,从而避免"窜支"现象.编制应用程序,通过几个典型算例对算法进行了验证.该工作能够有效简化颤振分析的后处理工作,提高分析效率.     

Effects of permeability and viscosity in linear polymeric gels

We propose and analyze a mathematical model of the mechanics of gels, consisting of the laws of balance of mass and linear momentum of the polymer and liquid components of the gel. We consider a gel to be an immiscible and incompressible mixture of a nonlinearly elastic polymer and a fluid. The problems that we study are motivated by predictions of the life cycle of body‐implantable medical devices. Scaling arguments suggest neglecting inertia terms, and therefore, we consider the quasi‐static approximation to the dynamics. We focus on the linearized system about stress‐free states, uniform expansions, and compressions and derive sufficient conditions for the solvability of the time‐dependent problems. These turn out to be conditions that guarantee local stability of the equilibrium solutions. We also consider non‐stress free equilibria and states with residual stress and derive an energy law for the corresponding time‐dependent system. The conditions that guarantee stability of solutions provide a selection criteria of the material parameters of devices. The boundary conditions that we consider are of two types, displacement‐traction and permeability of the gel surface to the fluid. We address the cases of viscous and inviscid solvent, assume Newtonian dissipation for the polymer component, and establish existence of weak solutions for the different boundary permeability conditions and viscosity assumptions. We present two‐dimensional, finite element numerical simulations to study stress concentration on edges, this being the precursor to debonding of the gel from its substrate. Copyright © 2015 John Wiley & Sons, Ltd.     

树脂基复合材料粘接的优化设计

本文在试验数据和理论分析的基础上,提出树脂基复合材料单搭接的优化设计的原则,胶粘剂的选择、被粘物的设计,粘接长度的选择、胶层厚度的选择等.认为通过优化设计可以提高粘接强度,减轻产品的重量,提高其质量.     

EPR制度下的家电以旧换新回收策略优化模型

研究生产者责任延伸制度(EPR)约束下,家电生产销售企业集中决策下实施以旧换新进行废旧产品回收的问题。在对家电消费者市场结构进行分析基础上,建立以企业利润最大化为目标的实施以旧换新回收策略的优化模型,并根据我国家电行业EPR制度的特点,构建政府与企业间竞争的Stackelberg博弈模型,研究在政府环境效益最优时的补贴和基金征收标准下,企业以旧换新回收产品最优定价决策;同时,与企业不直接参与废旧产品回收时单一定价相应结果进行比较。结果表明:在EPR约束下,政府环境效益最优时的补贴和基金征收标准,对企业实施以旧换新回收策略的产品销量、总利润和废旧产品回收量的影响取决于企业成本结构、消费者结构、消费者效用和废旧产品回收处理能力。企业决策者需根据不同情形决定是否参与以旧换新回收实践。     

拍卖机制设计在区块链中的应用与挑战

区块链是新一代信息技术的重要组成部分,是分布式网络、加密技术、智能合约等多种技术集成的新型数据库软件。过去的十多年,区块链技术在全球范围内产生广泛影响。如今的区块链技术,已从最初的关注于解决货币和支付的去中心化问题,转入到解决市场的去中心化问题。智能合约的出现使得基于区块链技术的去中心化金融进入高速发展状态,也涌现出区块链环境下的各类拍卖场景。本文首次从机制设计角度,以区块链交易费机制,非同质化代币(Non-Fungible Token,NFT)拍卖和矿工可提取价值(Miner-Extractable Value,MEV)交易位置拍卖为主要对象,总结和剖析近些年来区块链上特有的拍卖机制;并针对区块链特性,提出区块链上拍卖机制设计所面临的挑战和未来亟待解决的问题。     

Noncommutative geometry and motives: The thermodynamics of endomotives

We combine aspects of the theory of motives in algebraic geometry with noncommutative geometry and the classification of factors to obtain a cohomological interpretation of the spectral realization of zeros of L-functions. The analogue in characteristic zero of the action of the Frobenius on ?-adic cohomology is the action of the scaling group on the cyclic homology of the cokernel (in a suitable category of motives) of a restriction map of noncommutative spaces. The latter is obtained through the thermodynamics of the quantum statistical system associated to an endomotive (a noncommutative generalization of Artin motives). Semigroups of endomorphisms of algebraic varieties give rise canonically to such endomotives, with an action of the absolute Galois group. The semigroup of endomorphisms of the multiplicative group yields the Bost-Connes system, from which one obtains, through the above procedure, the desired cohomological interpretation of the zeros of the Riemann zeta function. In the last section we also give a Lefschetz formula for the archimedean local L-factors of arithmetic varieties.     

The Stokes phenomenon in the confluence of the hypergeometric equation using Riccati equation

In this paper we study the confluence of two regular singular points of the hypergeometric equation into an irregular one. We study the consequence of the divergence of solutions at the irregular singular point for the unfolded system. Our study covers a full neighborhood of the origin in the confluence parameter space. In particular, we show how the divergence of solutions at the irregular singular point explains the presence of logarithmic terms in the solutions at a regular singular point of the unfolded system. For this study, we consider values of the confluence parameter taken in two sectors covering the complex plane. In each sector, we study the monodromy of a first integral of a Riccati system related to the hypergeometric equation. Then, on each sector, we include the presence of logarithmic terms into a continuous phenomenon and view a Stokes multiplier related to a 1-summable solution as the limit of an obstruction that prevents a pair of eigenvectors of the monodromy operators, one at each singular point, to coincide.     

Comparison principle and analogues of the phragmen—lindelöf theorem for solutions of parabolic inequalities

It is well known that a Monotonicity Condition and a Coerciveness Condition principally lie in the basis of most results of the Theory of PDE's. The necessity of these important assumptions for the validity of a comparison principle and analogues of the Phragmen-Lindelöf theorem for solutions of quasilinear parabolic inequalities is discussed in the paper. In the first part of the work we introduce a new concept of monotonicity for nonlinear differential operators-nonlinear monotonicity concept-and on its basis we obtain new phenomena for solutions, subsolutions and supersolutions of the well-known quasilinear differential equations. In the second part we omit the current coerciveness condition and change it by a weaker one. In spite of this we obtain a series of new qualitative properties of solutions for wide classes of quasilinear parabolic inequalities. Most of these properties are also new for solutions of the well-known equations, which we consider in the paper.     

公众参与视角下的央地环境规制博弈分析

本文首先构建环境规制中中央政府和地方政府的两方演化博弈模型,并在此基础上将公众作为第三方参与主体,构建中央政府、地方政府和公众三方演化博弈模型,详细比较两方和三方博弈模型的区别,探究各个主体策略行为的影响因素。研究发现:(1)未有公众参与下,地方政府策略选择主要受地方政府积极执行成本、环境收益、经济损失,消极执行的环境政绩损失,中央政府监管力度、治理补贴和对地方政府的处罚等因素影响;中央政府的监管策略主要受到严格监管的成本以及对地方政府的治理补贴和处罚等因素影响。引入公众参与后,在央地两方博弈的基础上,地方政府环境规制执行策略的影响因素还增加了地方政府被举报后所受到的追加处罚,中央政府监管策略的影响因素还增加了中央政府监管力度、对地方政府的追加处罚以及中央政府的公信力损失。(2)未有公众参与下,中央政府严格监管的概率随地方政府积极执行概率的增大而减小。引入公众参与后,中央政府严格监管率随地方政府积极执行概率的增大而增大。说明在公众参与下,地方政府积极执行环境规制对中央政府严格监管产生的抑制作用转变成了促进作用。(3)地方政府积极执行的概率、中央政府严格监管的概率都随公众举报概率的增大而增大。说明公众参与不仅对地方政府承担环保责任具有促进作用,而且有利于促使中央政府落实环境治理政策。     

基于NSGA-Ⅱ的应急储备库多目标

应急物资储备库选址问题是在近年世界灾害多发的现实背景下产生的,根据具体选址问题特点建立了多目标选址决策模型。该模型综合考虑了两种灾害风险下储备库的成本费用、覆盖效率以及对重点地区的备用覆盖,以使模型更加符合实际目标及约束情况。算法设计上,首次采用带精英策略的非支配排序遗传算法(Fast and elitist Non-dominated Sorting Genetic Algorithm Ⅱ,NSGA-Ⅱ)解决储备库多目标选址问题,得到了Pareto非劣解分布并同不带精英策略的常规NSGA算法下的仿真结果进行对比分析。验证了模型的可行性以及NSGA-Ⅱ在解决储备库多目标选址问题的有效性。     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

非线性优化方法在大气和海洋科学数值研究中的若干应用

控制大气和海洋运动的模式是复杂的非线性模式,在考虑到线性奇异向量和线性奇异值只能描述切线性模式有效时段内小扰动发展的情况下,介绍了作者们近年来用非线性优化方法数值研究大气和海洋科学的有关工作,其中包括非线性奇异向量和非线性奇异值、条件非线性最优扰动、以及它们在数值天气和气候可预报性研究中的应用．结果表明,上述非线性优化方法在很大程度上揭示了大气和海洋运动的非线性特征;此外,对可预报性问题的新分类也做了详细介绍,即最大可预报时间、最大预报误差和最大允许初始误差A·D2这种分类的应用背景是针对数值天气预报和气候预测产品的评价;最后,讨论了数值模式敏感性分析的非线性优化方法,该方法在一定条件下可以定量识别模式误差和初始误差,量化判断数值模式的模拟能力．     

Analysis of the Stress State of the Surface Layer of a Polymeric Mass upon Filling of Bulky Compression Molds

The stress state of the surface layer of a polymeric mass during filling of bulky compression molds is analyzed. It is shown that, at particular rheological characteristics of the mass, temperature, and filling rates, cracking of the surface layer occurs, which leads to defects in the finished products. A physical analysis of this process makes it possible to conclude that the cracks arise due to the normal stresses operating in the front region of the moving polymeric mass. It is found that, under certain flow conditions, areas with a pressure lower than the atmospheric one appear on the surface of the polymer. If the tensile stresses arising in these local regions are higher than the tensile strength of the mass, the continuity of the composition is broken in the direction determined by the greatest rate of the normal deformation. To confirm the reliability of the crack-formation mechanism proposed, the distribution of the pressure and normal stresses over the free surface is calculated based on a numerical method. These calculations show that, by comparing the stress level achieved in the front region with the tensile-strength characteristics of the polymeric composition, it is possible to predict, with a sufficient accuracy, the possibility of crack formation in the surface layer of such a mass under given flow conditions and thus to solve the question on flawless manufacturing of products.     

Peridynamics via finite element analysis

Peridynamics is a recently developed theory of solid mechanics that replaces the partial differential equations of the classical continuum theory with integral equations. Since the integral equations remain valid in the presence of discontinuities such as cracks, the method has the potential to model fracture and damage with great generality and without the complications of mathematical singularities that plague conventional continuum approaches. Although a discretized form of the peridynamic integral equations has been implemented in a meshless code called EMU, the objective of the present paper is to describe how the peridynamic model can also be implemented in a conventional finite element analysis (FEA) code using truss elements. Since FEA is arguably the most widely used tool for structural analysis, this implementation may hasten the verification of peridynamics and significantly broaden the range of problems that the practicing analyst might attempt. Also, the present work demonstrates that different subregions of a model can be solved with either the classical partial differential equations or the peridynamic equations in the same calculation thus combining the efficiency of FEA with the generality of peridynamics. Several example problems show the equivalency of the FEA and the meshless peridynamic approach as well as demonstrate the utility and robustness of the method for problems involving fracture, damage and penetration.     

基于综合重要度的动车组多部件系统机会维修策略研究

针对我国动车组列车现行维修方式,提出基于综合重要度序列的动车组多部件系统机会维修策略,对提高系统可靠度贡献大的关键部件进行准时优先维修。建立部件综合重要度指数计算模型,并依据其对部件维修优先级进行排序。以维修总成本最低为目标计算单部件最优维修周期及时刻,以系统维修总成本最低为目标,以关键部件的维修时刻为系统停机时刻建立考虑重要度的多部件系统机会维修模型。算例选取某型动车组四级修时更换的四部件系统为研究对象,讨论机会维修里程窗的大小及其偏移量对维修效果的影响,对比结果表明,考虑综合重要度的机会维修策略能够在维修费用基本持平的条件下,保证对系统可靠性贡献大的关键部件的可靠性,进而保证系统的整体可靠性。     

Modelling and simulation of micro-well formation

Physico-chemical processes on the micro-scale require new modelling concepts because some effects become dominating that are negligible for macroscopic systems. This is illustrated by a new method for the production of micro-wells based on the placement of a small drop of toluene on a plate of polystyrene. After droplet evaporation, a micro-well is left. A mathematical model has been developed to understand the elementary processes of the micro-well formation. The model accounts for: (1) growth of the drop on the substrate, (2) evaporation process of the solvent, (3) dissolution of the substrate, (4) flow rate in the evaporating drop caused by the pinning effect, including the vertical velocity profile, and (5) increase in the concentration of dissolved material followed by precipitation. In the modelling and simulation process, it could be shown that the method of drop production also has a significant influence on the shape of the micro-wells.     

Unsteady motion of a spherical bubble in a complex fluid: Mathematical modelling and simulation

The nonlinear response of an oscillatory bubble in a complex fluid is studied. The bubble is immersed in a Newtonian liquid, which may have a dilute volume fraction of anisotropic additives such as fibers or few ppm of macromolecules. The constitutive equation for the fluid is based on a Maxwell model with an extensional viscosity for the viscous contribution. The model is considered new in the study of bubble dynamics in complex fluids. The numerical computation solves a system of three first order ordinary differential equations, including the one associated with the solution of the convolution integral, using a fifth order Runge–Kutta scheme with appropriated time steps. Asymptotic solutions of governing equation are developed for small values of the pressure forcing amplitude and for small values of the elastic parameter. A study of the bubble collapse radius is also presented. We compare the results predicted by our model with other model in the literature and a good agreement is observed. The calculated asymptotic solutions are also used to test the results of the numerical simulations. In addition, the orientation of the additives is considered. The angular probability density function is assumed to be a normal distribution. The results show that the model based on the fully aligned additives with the radial direction overestimates the tendency of the additives to stabilize the bubble motion, since the effect of extensional viscosity occurs due to the particle resistance to the movement throughout its longitudinal direction.     

我国经济产出与钢社会蓄积的关联分析

基于动态物质流分析方法及时间序列分析方法,本文以我国1949-2012年年度数据为样本,研究了工业化演进过程中我国经济产出与钢社会蓄积之间的关联。研究结果表明,随着经济的发展和工业化进程的演进,钢以实物产品的形式不断蓄积于我国社会当中,且蓄积的速度不断加快。我国经济产出与钢的社会蓄积之间存在长期协整关系,钢的社会蓄积既能在短期内推动经济的增长,又影响着经济产出的长期整体走势,而经济产出只是钢社会蓄积变化的长期原因。这说明我国的经济建设高度依赖钢的使用,而且经济增长对钢需求的拉动是一个长期的过程,不会在短期内对钢的需求造成显著影响。