指数型一次Logistic迭代方程解的周期倍分岔现象

本文讨论了指数型一次Ｌｏｇｉｓｔｉｃ迭代方程解的周期倍分岔现象的存在性,给出了周期倍分合时的临界点参数应满足的方程,并证明了周期倍分岔的临界点参数序列的极限是存在的,进而证明了当参数越过这个极限时,指数型一次 Ｌｏｇｉｓｔｉｃ迭代方程存在混沌解．     

二阶常微分方程及Thomas－Fermi方程的边值问题

本文利用上、下解方法推广了Ｍ．Ｌｅｅｓ关于半线性边值问题的结果，给出了另一类边值问题解的存在唯一性的一个充分条件；并利用所得的结果证明了Ｔｈｏｍａｓ－Ｆｅｒｍｉ方程的边值问题解的存在唯一性，从而推广了Ｃ．ＤＬｕｎｉｎｇ的结果．     

二阶非线性微分方程的单调解

本文讨论了一类二阶非线性常微分方程的单调解，给出了方程存在Ｂ类解的充要条件，部分地回答了Ｍａｒｉｎｉ在ＮｏｎｌｉｎｅａｒＡｎａｌｙｓｉｓ上提出的两个问题．     

二阶常微分方程及Thomas—Fermi方程的边值问题

本文利用上、下解方法推广了Ｍ．Ｌｅｅｓ关于半线性边值问题的结果，给出了另一类边值问题解的存在唯一性的一个充分条件；并利用所得的结果证明了Ｔｈｏｍａｓ－Ｆｅｒｍｉ方程的边值问题解的存在唯一性，从而推广了Ｃ．Ｄ．Ｌｕｎｉｎｇ的结果。     

关于迭代函数方程f~2(x)=af(x) bx的通解

设λ的二次三项式λ２－ａλ－ｂ的两个零点为λ１＝ｒ，λ２＝ｓ（ａ及ｂ为实数）．对０＜ｒ＜ｓ，ｒ＜０＜ｓ≠－ｒ及ｒ＝ｓ≠０这三种情形，Ｊ．Ｍａｔｋｏｗｓｋｉ与ＷｅｉｎｉａｎＺｈａｎｇ在“Ｍｅｔｈｏｄｏｆｃｈａｒａｃｔｅｒｉｓｔｉｃｓｆｏｒｆｕｎｃｔｉｏｎａｌｅｑｕａｔｉｏｎｓｉｎｐｏｌｙｎｏｍｉａｌｆｏｒｍ”一文中给出了迭代函数方程ｆ２（ｘ）＝ａｆ（ｘ）＋ｂｘ，对任ｘ∈Ｒ；ｆ∈Ｃ０（Ｒ，Ｒ）（１）的通解，并证明了当ｒ及ｓ非实数时方程（１）无解．对ｒ＝－ｓ≠０的情形，Ｍ．Ｋｕｃｚｍａ已给出了方程（１）的通解．本文则对ｒ＜ｓ＜０及ｒｓ＝０这两种情形给出了方程（１）的通解．此外，本文还给出了ｒ＜０＜ｓ≠－ｒ时关于方程（１）的通解的一个简洁的证明     

二维N－S方程的Fourier非线性Galerkin方法

本文对周期边界条件Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程，证明了其Ｆｏｕｒｉｅｒ非线性Ｇａｌｅｒｋｉｎ逼近解的存在唯一性，同时给出了逼近解的误差估计．     

相对论性Birkhoff系统动力学方程的代数结构与Poisson积分方法

定义相对论性Ｐｆａｆｆ作用量,得到相对论性Ｐｆａｆｆ Ｂｉｒｋｈｏｆｆ原理和相对论性Ｂｉｒｋｈｏｆｆ方程．证明了自治形式和半自治形式的相对论性Ｂｉｒｋｈｏｆｆ方程具有相容代数结构和Ｌｉｅ代数结构;一般非 自治形式的相对论性Ｂｉｒｋｈｏｆｆ方程没有代数结构．研究一种特殊的非自治形式的相对论性Ｂｉｒｋｈｏｆｆ方程,它具有相容代数结构和Ｌｉｅ容许代数结构．给出相对论性Ｂｉｒｋｈｏｆｆ方程的Ｐｏｉｓｓｏｎ积分 方法．最后给出应用性实例．     

Heisenberg群上四阶非线性方程特征值问题的正解

本文通过Ｌｅｒａｙ－Ｓｃｈａｕｄｅｒ度,给出Ｈｅｉｓｅｎｂｅｒｇ群上四阶非线性次椭圆方程特征值问题的正解的一些存在性结果．     

一类广义Boussinesq方程解的Blowup

该文利用Ｆｏｕｒｉｅｒ变换方法研究一类广义Ｂｏｕｓｓｉｎｅｓｑ方程ｕｔｔ－ｕｘｘ＝ｂｕｘｘｘ＋ａ（ｕｐ）ｘｘ＋ｃｕｑ的初边值问题的局部解的存在性与整体解的不存在性．其中ｂ＞０，ａ，ｃ为任意实数，ｐ≥１，ｑ≥１为整数．我们得到了上述问题的局部解存在和解在有限时刻ｂｌｏｗｕｐ的一些充分条件并且给出了几个具体实例．     

外部流动的Oseen耦合方法,I:Oseen耦合逼近

这篇文章考虑了具有非齐次边界条件的二维非定常外部Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程．通过将内部区域的Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程和外部区域的Ｏｓｅｅｎ方程相耦合,得到了Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ问题的逼近问题： Ｏｓｅｅｎ耦合问题,此外,我们证明了 Ｏｓｅｅｎ耦合方程弱解的存在性,唯一性和收敛精度．     

B-Spline Collocation Method for Nonlinear Singularly-Perturbed Two-Point Boundary-Value Problems

A B-spline collocation method is presented for nonlinear singularly-perturbed boundary-value problems with mixed boundary conditions. The quasilinearization technique is used to linearize the original nonlinear singular perturbation problem into a sequence of linear singular perturbation problems. The B-spline collocation method on piecewise uniform mesh is derived for the linear case and is used to solve each linear singular perturbation problem obtained through quasilinearization. The fitted mesh technique is employed to generate a piecewise uniform mesh, condensed in the neighborhood of the boundary layers. The convergence analysis is given and the method is shown to have second-order uniform convergence. The stability of the B-spline collocation system is discussed. Numerical experiments are conducted to demonstrate the efficiency of the method.     

Stochastic optimal control of internal hierarchical labor markets

This paper develops an optimal control model for a graded manpower system where the demand for manpower is uncertain. The organization's objective is to minimize the discounted costs of operating the manpower system, including excess demand costs. The stock of workers in various grades can be adjusted in two ways. The first method is outside hiring flows, which is the usual control variable used in previous research. The second method is to control the transition rates between grades of the hierarchy, an instrument not previously studied. Incorporating the transition rates into the control variables creates time lags in the control process. The resulting problem is solved numerically using an approximation for the time-lagged control variables. The numerical example is based on the Air Force officer hierarchy. The model is used to examine such issues as the desirability of granting tenure to workers who are not promoted to the highest grade and the effects of length-of-service and demand uncertainty on manpower policy.     

A Valley Following Method

We present a procedure to follow the "path along the valley floor" of a hypersurface. The aim is either to find minima, or to go from a minimum to a saddle point of index one, if the saddle is at the top of the valley floor. The motivation is that of taking into account local nonconvexity of the hypersurface and possibly to determine valleys. The method uses a projector technique where the projector is built by the tangent of the valley floor line. The projector is applied to the gradient and Hessian matrix of a given function, and it is used for predictor and corrector steps in path following. The resulting path is the "valley floor gradient extremal" which corresponds to the smallest (absolute) eigenvalue of the Hessian. Convergence properties are analysed.     

A Semi-Supervised Learning Algorithm for Growing Neural Gas in Face Recognition

In many classification applications and face recognition tasks, there exist unlabelled data available for training along with labelled samples. The use of unlabelled data can improve the performance of a classifier. In this paper, a semi-supervised growing neural gas is proposed for learning with such partly labelled datasets in face recognition applications. The classifier is first trained on the labelled data and then gradually unlabelled data is classified and added to the training data. The classifier is retrained; and so on. The proposed iterative algorithm conforms to the EM framework and is demonstrated, on both artificial and real datasets, to significantly boost the classification rate with the use of unlabelled data. The improvement is particularly great when the labelled dataset is small. Comparison with support vector machine classifiers is also given. The algorithm is computationally efficient and easy to implement.     

基于Fuzzy等价关系的矩形聚类方法

证明了Boole矩阵与模糊矩阵等价的充分必要条件,总结出Fuzzy聚类的矩形方法.针对《中国大学评价》中的6所林业院校,应用矩形方法,直接从模糊关系矩阵逐步降低阈值,得到分类的矩形表.此方法操作简单,形象直观,分类合理.     

Numerical evaluation of the temperature field of steady-state rolling tires

Rubber is the main component of pneumatic tires. The tire heating is caused by the hysteresis effects due to the deformation of the rubber during operation. Tire temperatures can depend on many factors, including tire geometry, inflation pressure, vehicle load and speed, road type and temperature and environmental conditions. The focus of this study is to develop a finite element approach to computationally evaluate the temperature field of a steady-state rolling tire. For simplicity, the tire is assumed to be composed of rubber and body-ply. The nonlinear mechanical behavior of the rubber is characterized by a Mooney–Rivlin model while the body-ply is assumed to be linear elastic material. The coupled effects of the inflation pressure and vehicle loading are investigated. The influences of body-ply stiffness are studied as well. The simulation results show that loading is the main factor to determine the temperature field. The stiffer body-ply causes less deformation of rubber and consequently decreases the temperature.     

Maximum Likelihood Estimation of Hidden Markov Multivariate Normal Distribution Parameters

Hidden Markov model is widely used in statistical modeling of time, space and state transition data. The definition of hidden Markov multivariate normal distribution is given. The principle of using cluster analysis to determine the hidden state of observed variables is introduced. The maximum likelihood estimator of the unknown parameters in the model is derived. The simulated observation data set is used to test the estimation effect and stability of the method. The characteristic is simple classical statistical inference such as cluster analysis and maximum likelihood estimation. The method solves the parameter estimation problem of complex statistical models.     

Natural frequencies of a functionally graded cracked beam using the differential quadrature method

The present work is concerned with the free vibration analysis of an elastically supported cracked beam. The beam is made of a functionally graded material and rested on a Winkler–Pasternak foundation. The line spring model is employed to formulate the problem. The method of differential quadrature is applied to solve it. The obtained results agreed with the previous similar ones. Further, a parametric study is introduced to investigate the effects of the geometric and elastic characteristics of the problem on the values of natural frequencies and mode shape functions.     

Optimization of functionals subject to integral constraints

The classical method for optimizing a functional subject to an integral constraint is to introduce the Lagrange multiplier and apply the Euler-Lagrange equations to the augmented integrand. The Lagrange multiplier is a constant whose value is selected such that the integral constraint is satisfied. This value is frequently an eigenvalue of the boundary-value problem and is determined by a trial-and-error procedure. A new approach for solving this isoperimetric problem is presented. The Lagrange multiplier is introduced as a state variable and evaluated simultaneously with the optimum solution. A numerical example is given and is shown to have a large region of convergence.     

冲裁件有约束最优剪切方式的设计

本文讨论冲裁件有约束最优剪切方式的设计问题 .阐明最优剪切排样方式的规范结构 ;采用分支定界法求解冲裁件无约束排样问题 ;将有约束排样问题转换为求解一系列的无约束排样问题 ,并通过对解的性质分析提高算法效率 .实验计算结果说明本文算法十分有效 .最后给出一例题的最优排样方式 .