Synthesis, characterization, and electrochemical properties of a series of sterically varied iron(II) alkoxide precursors and their resultant nanoparticles

A new family of iron(II) aryloxide [Fe(OAr)(2)(py)(x)] precursors was synthesized from the alcoholysis of iron(II) mesityl [Fe(Mes)(2)] in pyridine (py) using a series of sterically varied 2-alkyl phenols (alkyl = methyl (H-oMP), isopropyl (H-oPP), tert-butyl (H-oBP)) and 2,6-dialkyl phenols (alkyl = methyl (H-DMP), isopropyl (H-DIP), tert-butyl (H-DBP), phenyl (H-DPhP)). All of the products were found to be mononuclear and structurally characterized as [Fe(OAr)(2)(py)(x)] (x = 3 OAr = oMP (1), oPP (2), oBP (3), DMP (4), DIP (5); x = 2 OAr = DBP (6), DPhP (7)). The use of tris-tert-butoxysilanol (OSi(OBu(t))(3) = TOBS) led to isolation of [Fe(TOBS)(2)(py)(2)] (8). The new Fe(OAr)(2)(py)(x) (1-6) were found, under solvothermal conditions, to produce nanodots identified by PXRD as the γ-maghemite phase. The model precursor 3 and the nanoparticles 6n were evaluated using electrochemical methods. Cyclic voltammetry for 3 revealed multiple irreversible oxidation peaks, which have been tentatively attributed to the loss of alkoxide ligand coupled with the deposition of a solid Fe-containing coating on the electrode. This coating was stable out to the voltage limits for the acetonitrile solvent.     

Structural variations of potassium aryloxides

A series of potassium aryloxides (KOAr) were isolated from the reaction of a potassium amide (KN(SiMe(3))(2)) and the desired substituted phenoxide (oMP, 2-methyl; oPP, 2-iso-propyl; oBP, 2-tert-butyl; DMP, 2,6-di-methyl; DIP, 2,6-di-iso-propyl; DBP, 2,6-di-tert-butyl) in tetrahydrofuran (THF) or pyridine (py) as the following: [([K(mu(4)-oMP)(THF)][K(mu(3)-oMP)])(5)]( infinity ) (1), [[K(6)(eta(6),mu(3)-oMP)(4)(eta(6),mu(4)-oMP)(2)(py)(4)].[K(6)(eta(6),mu(3)-oMP)(6)(eta(6)-py)(4)]]( infinity ) (2), [K(mu(3)-oPP)](4)(THF)(3) (3), [K(4)(eta(6),mu(3)-oPP)(2)(mu(3)-oPP)(2)(py)(3)]( infinity ) (4), [K(mu(3)-oBP)(THF)](6) (5), [K(6)(eta(6),mu(3)-oBP)(2)(mu(3)-oBP)(4)(py)(4)]( infinity ) (6), [K(3)(eta(6),mu(3)-DMP)(2)(mu-DMP)(THF)]( infinity ) (7), [[K(eta(6),mu-DMP)(py)](2)]( infinity ) (8), [K(eta(6),mu-DIP)]( infinity ) (9), [K(eta(6),mu-DBP)]( infinity ) (10). Further exploration of the aryl interactions led to the investigation of the diphenylethoxide (DPE) derivative which was isolated as [K(mu(3)-DPE)(THF)](4) (11) or [K(mu(3)-DPE)(py)](4).py(2) (12) depending on the solvent used. In general, the less sterically demanding ligands (oMP, oPP, oBP, and DMP) were solvated polymeric species; however, increasing the steric bulk (DIP and DBP) led to unsolvated polymers and not discrete molecules. For most of this novel family of compounds, the K atoms were pi-bound to the aryl rings of the neighboring phenoxide derivatives to fill their coordination sites. The synthesss and characterization of these compounds are described in detail.     

Tin(II) amide/alkoxide coordination compounds for production of Sn-based nanowires for lithium ion battery anode materials

A series of tin(II) amide alkoxides ([(OR)Sn(NMe(2))](n)) and tin(II) alkoxides ([Sn(OR)(2)](n)) were investigated as precursors for the production of tin oxide (SnO(x)) nanowires. The precursors were synthesized from the metathesis of tin dimethylamide ([Sn(NMe(2))(2)](2)) and a series of aryl alcohols {H-OAr = H-OC(6)H(4)(R)-2: R = CH(3) (H-oMP), CH(CH(3))(2) (H-oPP), C(CH(3))(3) (H-oBP)] or [H-OC(6)H(3)(R)(2)-2,6: R = CH(3) (H-DMP), CH(CH(3))(2) (H-DIP), C(CH(3))(3) (H-DBP)]}. The 1:1 products were all identified as the dinuclear species [(OAr)Sn(μ-NMe(2))](2) where OAr = oMP (1), oPP (2), oBP (3), DMP (4), DIP (5), DBP (6). The 1:2 products were identified as either a polymer ([Sn(μ-OAr)(2)](∞) (where OAr = oMP (7), oPP (8)), dinuclear [(OAr)Sn(μ-OAr)](2) (where OAr = oBP (9), DMP (10) or DIP/HNMe(2) (11)), or mononuclear [Sn(DBP)(2)] (12) complexes. These novel families of compounds (heteroleptic 1-6, and homoleptic 7-12) were evaluated for the production of SnO(x) nanowires using solution precipitation (SPPT; oleylamine/octadecene solvent system) or electrospinning (ES; THF solvent) processing conditions. The SPPT route that employed the heteroleptic precursors yielded mixed phases of Sn(o):romarchite [1 (100:0); 2 (80:20); 3 (68:32); 4 (86:14); 5 (66:35); 6 (88:12)], with a variety of spherical sized particles [1 (350-900 nm); 2 (150-1200 nm); 3 (250-950 nm); 4 (20-180 nm); 5 (80-400 nm); 6 (40-200 nm)]. For the homoleptic precursors, similar phased [7 (80:20); 8 (23:77); 9 (15:85); 10 (34:66); 11 (77:23); 12 (77:23)] spherical nanodots were isolated [7 (50-300 nm); 8: (irregular); 10 (200-800 nm); 11 (50-150 nm); 12 (50-450 nm)], except for 9 which formed polycrystalline rods [Sn(o):romarchite (15:85)] with aspect ratios >100. From ES routes, the heteroleptic species were found to form 'tadpole-shaped' materials whereas the homoleptic species formed electrosprayed nanodots. The one exception noted was for 7, where, without use of a polymer matrix, nanowires of Sn(o), decorated with micron sized 'balls' were observed. Due to the small amount of material generated, PXRD patterns were inconclusive to the identity of the generated material; however, cyclic voltammetry on select samples was used to tentatively identify the final Sn(o) (from 7) with the other sample identified as SnO(x) (from 1).     

Synthesis and characterization of a family of structurally characterized dysprosium alkoxides for improved fatigue-resistance characteristics of PDyZT thin films

Using either an ammoniacal route, the reaction between DyCl3, Na0, and HOR in liquid ammonia, or preferentially reacting Dy(N(SiMe3)2)3 with HOR in a solvent, we isolated a family of dysprosium alkoxides as [Dy(mu-ONep)2(ONep)]4 (1), (ONep)2Dy[(mu3-ONep)(mu-ONep)Dy(ONep)(THF)]2(mu-ONep) (2), (ONep)2Dy[(mu3-ONep)(mu-ONep)Dy(ONep)(py)]2(mu-ONep) (3), [Dy3(mu3-OBut)2(mu-OBut3(OBut)4(HOBut)2] (4), [Dy3(mu3-OBut)2(mu-OBut)3(OBut)4(THF)2] (5), [Dy3(mu3-OBut)2(mu-OBut)3(OBut)4(py)2] (6), (DMP)Dy(mu-DMP)4[Dy(DMP)2(NH3)]2 (7), [Dy(eta6-DMP)(DMP)2]2 (8), Dy(DMP)3(THF)3 (9), Dy(DMP)3(py)3 (10), Dy(DIP)3(NH3)2 (11), [Dy(eta6-DIP)(DIP)2]2 (12), Dy(DIP)3(THF)2 (13), Dy(DIP)3(py)3 (14), Dy(DBP)3(NH3) (15), Dy(DBP)3 (16), Dy(DBP)3(THF) (17), Dy(DBP)3(py)2 (18), [Dy(mu-TPS)(TPS2]2 (19), Dy(TPS)3(THF)3 (20), and Dy(TPS)3(py)3 (21), where ONep = OCH2CMe3, OBut) = OCMe3, DMP = OC6H3(Me)(2)-2,6, DIP = OC6H3(CHMe2)(2)-2,6, DBP = OC6H3(CMe3)(2)-2,6, TPS = OSi(C6H5)3, tol = toluene, THF = tetrahydrofuran, and py = pyridine. We were not able to obtain X-ray quality crystals of compounds 2, 8, and 9. The structures observed and data collected for the Dy compounds are consistent with those reported for its other congeners. A number of these precursors were used as Dy dopants in Pb(Zr0.3Ti0.7)O3 (PZT 30/70) thin films, with compound 12 yielding the highest-quality films. The resulting Pb0.94Dy0.04(Zr0.3Ti0.7)O3 [PDyZT (4/30/70)] had similar properties to PZT (30/70), but showed substantial resistance to polarization reversal fatigue.     

Synthesis and structural analysis of the polymetallated alkali calixarenes [M4(p-tert-butylcalix[4]arene-4H)(thf)x]2.n THF (M=Li,K; n=6 or 1; x=4 or 5) and [Li2(p-tert-butylcalix[4]arene-2H)(H2O)(mu-H2O)(thf)].3 THF

To study the structures and reactivities of alkali metallated intermediates of calix[4]arenes, three compounds were isolated: [Li(4)(p-tert-butylcalix[4]arene-4H)(thf)(4)](2).6 THF (1), [Li(2)(p-tert-butylcalix[4]arene-2H)(H(2)O)(mu-H(2)O)(thf)].3 THF (2), and [K(4)(p-tert-butylcalix[4]arene-4H)(thf)(5)](2).THF (3). The structure of 1 is shown to be dependent on the coordinating solvent. Partial hydrolysis of 1 leads to the formation of 2. The potassium compound 3 features a different structure to that of 1, due to a higher coordination number as well as stronger cation-pi-bonding interactions.     

Structural diversity in a series of alkyl-substituted cesium aryloxides

A family of cesium aryloxides [Cs(OAr)](n) were synthesized and structurally characterized from the reaction of 1:1 or 1:excess stoichiometry of Cs(0) and the appropriate alkyl-substituted phenol: 2-alkylphenol [alkyl = methyl (H-oMP), isopropyl (H-oPP), and tert-butyl (H-oBP)] and 2,6-dialkylphenol [alkyl = methyl (H-DMP), isopropyl (H-DIP), tert-butyl (H-DBP), and phenyl (H-DPhP)]. The products were structurally identified as [Cs(oMP)(H-oMP)(2)](n) (1), [Cs(5)(oPP)(5)](n) (2), [Cs(4)(oBP)(4)(H-oBP)(6)](n) (3x, shown), [Cs(3)(DMP)(3)](n) (4), [Cs(2)(DIP)(2)](n) (5), [Cs(DIP)(H-DIP)](n) (5x), and [Cs(DPhP)](n) (7). Compounds 1-7 were found to adopt complex polymeric structures employing π interactions from the neighboring pendant phenoxide ligands. The solution behavior of these compounds was studied using solution (133)Cs NMR spectroscopy, and for each compound, a single (133)Cs NMR resonance was observed, with chemical shift values found to be strongly solvent-dependent. This implies that monomeric cesium salt species involving solvent interactions exist in solution.     

Synthesis of group 1 metal 2,6-diphenylphenoxide complexes [M(OC6H3Ph2-2,6)] (M = Li,Na, K,Rb, Cs) and structures of the solvent-free complexes [Rb(OC6H3Ph2-2,6)]x and [Cs(OC6H3Ph2-2,6)x: one-dimensional extended arrays of metal aryloxides

Reaction of 2,6-diphenylphenol (HOC(6)H(3)Ph(2)-2,6) with (n)BuLi, NaH, KH, or Rb or Cs metal in benzene gives the solvent-free complexes [M(OAr)]x in excellent yield. The complex [Rb(OC(6)H(3)Ph(2)-2,6)](x)() exhibits a ladderlike structure in the solid state with triply bridging oxygen atoms and Rb-O distances of 2.743(3), 2.930(2), and 2.973(2) A. The Rb cations interact with the pi-electron cloud of the arene moieties, giving rise to a high Rb coordination number. The cesium-containing congener forms a layered, columnlike structure consisting of [Cs(2)(mu(2)-OAr)(2)] units, with nearly identical Cs-O distances of 2.945(2) and 2.947(2) A. The individual layers are held together solely by Cs-arene pi-interactions.     

203,205Tl NMR studies of crystallographically characterized thallium alkoxides. X-ray Structures of [TI(OCH2CMe3)]4 and [TI(OAr)]infinity, where OAr = OC6H3(Me)2-2,6 and OC6H3(CHMe2)2-2,6

[Tl(OCH2Me)]4 (1) was reacted with excess HOR to prepare a series of [Tl(OR)]n, where OR = OCHMe2 (2, n = 4), OCMe3 (3, n = 4), OCH2CMe3 (4, n = 4), OC6H3(Me)2-2,6 (5, n = infinity), and OC6H3(CHMe2)2-2,6 (6, n = infinity). Single-crystal X-ray diffraction experiments revealed that in the solid state the alkoxide-ligated compound 4 adopts a cubane structure, whereas the aryloxide derivatives, 5 and 6, formed polymeric chains. Compounds 1-6 were also characterized by 203,205Tl solution and 205Tl solid-state NMR spectroscopy. In solution it was determined that 1-4 retained the [Tl-O]4 cube structure, whereas the polymeric species 5 and 6 appeared to be fluxional. Variations in the solution and solid-state structures for the [Tl(OR)]4 cubes and polymeric [Tl(OAr)]infinity are influenced by the steric hindrance of the ligand. The acidity of the parent alcohol influences the degree of covalency at the Tl metal center, which is reflected in the 203,205Tl chemical shifts for 1-6.     

A comparative study of pi-arene-bridged lanthanum arylamide and aryloxide dimers. Solution behavior, exchange mechanisms, and X-ray crystal structures of La2(NH-2,6-iPr2C6H3)6, La(NH-2,6-iPr2C6H3)3(THF)3, and La(NH-2,6-iPr2C6H3)3(py)2

Reaction of 3 equiv of 2,6-diisopropylaniline with La[N(SiMe(3))(2)](3) produces the dimeric species La(2)(NHAr)(6) (1). X-ray crystallography reveals a centrosymmetric structure, where the dimeric unit is bridged by intermolecular eta(6)-arene interactions of a unique arylamide ligand attached to an adjacent metal center. Exposure of 1 to THF results in formation of the monomeric tris-THF adduct La(NHAr)(3)(THF)(3) (2), which was shown by X-ray crystallography to maintain a fac-octahedral structure in the solid state. (1)H NMR spectroscopy illustrates that the binding of THF to 1 to form 2 is reversible and removal of THF under vacuum regenerates dimeric 1. Addition of pyridine to 1 yields the monomeric bis-pyridine adduct La(NHAr)(3)(py)(2) (3), which exhibits a distorted trigonal-bipyramidal La metal center. Solution (1)H NMR, IR, and Raman spectroscopy indicate that the pi-arene-bridged dimeric structure of 1 is maintained in solution. Variable-temperature (1)H NMR spectroscopic investigations of 1 are consistent with a monomer-dimer equilibrium at elevated temperature. In contrast, variable-temperature (1)H NMR spectroscopic investigations of the aryloxide analogue La(2)(OAr)(6) (4) show that the bridging and terminal aryloxide groups exchange by a mechanism in which the dimeric nature of the compound is retained. Density functional theory (DFT) calculations were carried out on model compounds La(2)(OC(6)H(5))(6), La(2)(NHC(6)H(5))(6), and (C(6)H(5)R)La(XC(6)H(5))(3), where X = O or NH and R = H, OH, or NH(2). The formation of eta(6)-arene interactions is energetically favored over monomeric LaX(3) (X = OPh or NHPh) with the aryloxide pi-arene interaction being stronger than the arylamide pi-arene interaction. Calculation of vibrational frequencies reveals the origin of the observed IR spectral behavior of both La(2)(OC(6)H(5))(6) and La(2)(NHC(6)H(5))(6), with the higher energy nu(C=C) stretch due to terminal ligands and the lower energy stretch associated with the bridging ligands.     

The reaction of Li[Al(OR)4] R = OC(CF3)2Ph, OC(CF3)3 with NO/NO2 giving NO[Al(OR)4], Li[NO3] and N2O. The synthesis of NO[Al(OR)4] from Li[Al(OR)4] and NO[SbF6] in sulfur dioxide solution

NO[Al(OC(CF(3))(2)Ph)(4)] 1 and NO[Al(OC(CF(3))(3))(4)] 2 were obtained by the metathesis reaction of NO[SbF(6)] and the corresponding Li[Al(OR)(4)] salts in liquid sulfur dioxide solution in ca 40% (1) and 85% (2) isolated yield. 1 and 2, as well as Li[NO(3)] and N(2)O, were also given by the reaction of an excess of mixture of (90 mol%) NO, (10 mol%) NO(2) with Li[Al(OR)(4)] followed by extraction with SO(2). The unfavourable disproportionation reaction of 2NO(2)(g) to [NO](+)(g) and [NO(3)](-)(g)[DeltaH degrees = +616.2 kJ mol(-1)] is more than compensated by the disproportionation energy of 3NO(g) to N(2)O(g) and NO(2)(g)[DeltaH degrees =-155.4 kJ mol(-1)] and the lattice energy of Li[NO(3)](s)[U(POT)= 862 kJ mol(-1)]. Evidence is presented that the reaction proceeds via a complex of [Li](+) with NO, NO(2)(or their dimers) and N(2)O. NO(2) and Li[Al(OC(CF(3))(3))(4)] gave [NO(3)(NO)(3)][Al(OC(CF(3))(3))(4)](2), NO[Al(OC(CF(3))(3))(4)] and (NO(2))[Al(OC(CF(3))(3))(4)] products. The aluminium complex [Li[AlF(OC(CF(3))(2)Ph)(3)]](2) 3 was prepared by the thermal decomposition of Li[Al(OC(CF(3))(2)Ph)(4)]. Compounds 1 and 3 were characterized by single crystal X-ray structural analyses, 1-3 by elemental analyses, NMR, IR, Raman and mass spectra. Solid 1 contains [Al(OC(CF(3))(2)Ph)(4)](-) and [NO](+) weakly linked via donor acceptor interactions, while in the SO(2) solution there is an equilibrium between the associated [NO](+)[Al(OC(CF(3))(2)Ph)(4)](-) and separated solvated ions. Solid 2 contains essentially ionic [NO](+) and [Al(OC(CF(3))(3))(4)](-). Complex 3 consists of two [Li[AlF(OC(CF(3))(2)Ph)(3)]] units linked via fluorine lithium contacts. Compound 1 is unstable in the SO(2) solution and decomposes to yield [AlF(OC(CF(3))(2)Ph)(3)](-), [(PhC(CF(3))(2)O)(3)Al(mu-F)Al(OC(CF(3))(2)Ph)(3)](-) anions as well as (NO)C(6)H(4)C(CF(3))(2)OH, while compound 2 is stable in liquid SO(2). The [small nu](NO(+)) in 1 and [NO](+)(toluene)[SbCl(6)] are similar, implying similar basicities of [Al(OC(CF(3))(2)Ph)(4)](-) and toluene.     

Structural diversity of lithium sulfenamides: 7Li NMR studies in solution and crystal structures of [Li2(eta2-(CH3)3C-NS-C6H4CH(3)-4)2(THF)2] and [Li2(eta1-4-CH3C6H4-NS-C6H4CH(3)-4)2(THF)4

Two lithium sulfenamides were prepared by reaction of (CH(3))(3)C-N(H)-S-C(6)H(4)CH(3)-4 (1) and 4-CH(3)C(6)H(4)-N(H)-S-C(6)H(4)CH(3)-4 (2) with an alkyllithium. The unsolvated sulfenamide Li[(CH(3))(3)C-NS-C(6)H(4)CH(3)-4] (3) was soluble enough for variable-temperature (VT) (7)Li NMR to provide evidence of a dynamic exchange of oligomers in solution. The crystal structures of the solvated sulfenamides of [Li(2)(eta(2)-(CH(3))(3)C-NS-C(6)H(4)CH(3)-4)(2)(THF)(2)] (4) and of [Li(2)(eta(1)-4-CH(3)C(6)H(4)-NS-C(6)H(4)CH(3)-4)(2)(THF)(4)] (6) consisted of dimers in which the anions display different hapticities. The VT (7)Li NMR spectra of 4 suggest that the two different structures exist in equilibrium in toluene-THF mixtures. These compounds are easily oxidized to the neutral thioaminyl radicals as identified by EPR spectroscopy.     

Trapping of hemiquinone radicals at Mo and P sites by phosphide-bridged dimolybdenum species: chemistry of complexes [Mo2(eta5-C5H5)2(OC6H4OH)(mu-PR2)(CO)4] and [Mo2(eta5-C5H5)2{mu-PR(OC6H4OH)}(CO)4]- (R = Cy, Ph)

The phosphide-bridged dimolybdenum complexes (H-DBU)[Mo2Cp2(mu-PR2)(CO)4] (R= Cy, Ph; DBU = 1,8-diazabicyclo[5.4.0.]undec-7-ene) react with p-benzoquinone to give the hemiquinone complexes [Mo(2)Cp2(OC6H4OH)(mu-PR2)(CO)4]. The latter experience facile homolytic cleavage of the corresponding Mo-O bonds and react readily at room temperature with HSPh or S2Ph2 to give the thiolate complexes [Mo2Cp2(mu-PCy2)(mu-SPh)(CO)4] or [Mo2Cp2(mu-PR2)(mu-SPh)(CO)2]. In contrast, PRH-bridged substrates experience overall insertion of quinone into the P-H bond to give the anionic compounds (H-DBU)[Mo(2)Cp2{mu-PR(OC6H4OH)}(CO)4], which upon acidification yield the corresponding neutral hydrides. The cyclohexyl anion experiences rapid nucleophilic displacement of the hemiquinone group by different anions ER- (ER = OH, OMe, OC4H5, OPh, SPh) to give novel anionic compounds (H-DBU)[Mo2Cp2{mu-PCy(ER)}(CO)4], which upon acidification yield the corresponding neutral hydrides. The structure of four of these hydride complexes [PPh(OC6H4OH), PCy(OH), PCy(OMe), and PCy(OPh) bridges] was determined by X-ray diffraction methods and confirmed the presence of cis and trans isomers in several of these complexes. In addition, it was found that the hydroxyphosphide anion [Mo2Cp2{mu-PCy(OH)}(CO)4]- displays in solution an unprecedented tautomeric equilibrium with its hydride-oxophosphinidene isomer [Mo2Cp2(mu-H){mu-PCy(O)}(CO)4]-.     

Fluoride-bridged {Ln(2)Cr(2)} polynuclear complexes from semi-labile mer-[CrF(3)(py)(3)] and [Ln(hfac)(3)(H(2)O)(2)

The trifluorido complex mer-[CrF(3)(py)(3)] (py = pyridine) reacts with 1 equiv. of [Ln(hfac)(3)(H(2)O)(2)] and depending on the solvent forms the tetranuclear clusters [Cr(2)Ln(2)(μ-F)(4)(μ-OH)(2)(py)(4)(hfac)(6)], 1Ln, and [Cr(2)Ln(2)(μ-F)(4)F(2)(py)(6)(hfac)(6)], 2Ln, in acetonitrile and 1,2-dichloroethane, respectively (Ln = Y, Gd, Tb, Dy, Ho, and Er; hfacH = 1,1,1,5,5,5-hexafluoroacetylacetone). Reaction with [Dy(hfac)(3)(H(2)O)(2)] in dichloromethane produces the dinuclear cluster [CrDy(μ-F)F(OH(2))(py)(3)(hfac)(4)], 3Dy. All the clusters feature fluoride bridges between the chromium(iii) and lanthanide(iii) centres. Fits of susceptibility data for 1Gd and 2Gd reveal the fluoride-mediated chromium(iii)-lanthanide(iii) exchange interactions to be 0.43(5) cm(-1) and 0.57(7) cm(-1), respectively (in the convention). Heat capacity measurements on 2Gd reveal a moderate magneto-caloric effect (MCE) reaching -ΔS(m)(T) = 11.4 J kg(-1) K(-1) for ΔB(0) = 9 T → 0 T at T = 4.1 K. Out-of-phase alternating-current susceptibility (χ') signals are observed for 1Dy, 2Dy and 2Tb, demonstrating slow relaxation of the magnetization.     

Oligomerization and oxide formation in bismuth aryl alkoxides: synthesis and characterization of Bi4(mu 4-O)(mu-OC6F5)6(mu 3-OBi(mu-OC6F5)3)2(C6H5CH3), Bi8(mu 4-O)2(mu 3-O)2(mu-OC6F5)16, Bi6(mu 3-O)4(mu 3-OC6F5)(mu 3-OBi(OC6F5)4)3, NaBi4(mu 3-O)2(OC6F5)9(THF)2, and Na2Bi4(mu 3-O)2(OC6F5)10(THF)2

Exposing [Bi(OR)3(toluene)]2 (1, R = OC6F5) to different solvents leads to the formation of larger polymetallic bismuth oxo alkoxides via ether elimination/oligomerization reactions. Three different compounds were obtained depending upon the conditions: Bi4(mu 4-O)(mu-OR)6(mu 3-OBi(mu-OR)3)2(C6H5CH3) (2), Bi8(mu 4-O)2(mu 3-O)2(mu 2-OR)16 (3), Bi6(mu 3-O)4(mu 3-OR)(mu 3-OBi(OR)4)3 (4). Compounds 2 and 3 can also be synthesized via an alcoholysis reaction between BiPh3 and ROH in refluxing dichloromethane or chloroform. Related oxo complexes NaBi4(mu 3-O)2(OR)9(THF)2 (5) and Na2Bi4(mu 3-O)2(OR)10(THF)2 (6) were obtained from BiCl3 and NaOR in THF. The synthesis of 1 and Bi(OC6Cl5)3 via salt elimination was successful when performed in toluene as solvent. For compounds 2-6 the single-crystal X-ray structures were determined. Variable-temperature NMR spectra are reported for 2, 3, and 5.     

Synthesis and structures of the [benzamidinato]3- complexes Li3(tmeda)(L1)]2 and [Li(thf)4][Li5(L2)(OEt2)2] [L1 = N(SiMe3)C(Ph)N(SiMe3) and L2 = N(SiMe3)C(C6H4-4)NPh

Reduction at ambient temperature of each of the lithium benzamidinates [Li(L(1))(tmeda)] or [{Li(L(2))(OEt(2))(2)}(2)] with four equivalents of lithium metal in diethyl ether or thf furnished the brown crystalline [Li(3)(L(1))(tmeda)] (1) or [Li(thf)(4)][Li(5)(L(2))(2)(OEt(2))(2)] (2), respectively. Their structures show that in each the [N(R(1))C(R(3))NR(2)](3-) moiety has the three negative charges largely localised on each of N, N' and R = Aryl); a consequence is that the "aromatic" 2,3- and 5,6-CC bonds of R(3) approximate to being double bonds. Multinuclear NMR spectra in C(6)D(6) and C(7)D(8) show that 1 and 2 exhibit dynamic behaviour. [The following abbreviations are used: L(1) = N(SiMe(3))C(Ph)N(SiMe(3)); L(2) = N(SiMe(3))C(C(6)H(4)Me-4)N(Ph); tmeda = (Me(2)NCH(2)-)(2); thf = tetrahydrofuran.] This reduction is further supported by a DFT analysis.     

Activation of carbodiimide and transformation with amine to guanidinate group by Ln(OAr)3(THF)2 (Ln: lanthanide and yttrium) and Ln(OAr)3(THF)2 as a novel precatalyst for addition of amines to carbodiimides: influence of aryloxide group

Reaction of Ln(OAr(1))(3)(THF)(2) (Ar(1)= [2,6-((t)Bu)(2)-4-MeC(6)H(2)] with carbodiimides (RNCNR) in toluene afforded the RNCNR coordinated complexes (Ar(1)O)(3)Ln(NCNR) (R = (i)Pr (isopropyl), Ln = Y (1) and Yb (2); R = Cy (cyclohexyl), Ln = Y (3)) in high yields. Treatment of 1 and 2 with 4-chloroaniline, respectively, at a molar ratio of 1:1 yielded the corresponding monoguanidinate complex (Ar(1)O)(2)Y[(4-Cl-C(6)H(4)N)C(NH(i)Pr)N(i)Pr](THF) (4) and (Ar(1)O)(2)Yb[(4-Cl-C(6)H(4)N)C(NH(i)Pr)N(i)Pr](THF) (5). Complexes 4 and 5 can be prepared by the reaction of Ln(OAr(1))(3)(THF)(2) with RNCNR and amine in toluene at a 1:1:1 molar ratio in high yield directly. A remarkable influence of the aryloxide ligand on this transformation was observed. The similar transformation using the less bulky yttrium complexes Y(OAr(2))(3)(THF)(2) (Ar(2) = [2,6-((i)Pr)(2)C(6)H(3)]) or Y(OAr(3))(3)(THF)(2) (Ar(3) = [2,6-Me(2)C(6)H(3)]) did not occur. Complexes Ln(OAr(1))(3)(THF)(2) were found to be the novel precatalysts for addition of RNCNR with amines, which represents the first example of catalytic guanylation by the lanthanide complexes with the Ln-O active group. The catalytic activity of Y(OAr(1))(3)(THF)(2) was found to be the same as that of monoguanidinate complex 4, indicating 4 is one of the active intermediates in the present process. The other intermediate, amide complex (Ar(1)O)(2)Ln[(2-OCH(3)-C(6)H(4)NH)(2-OCH(3)-C(6)H(4)NH(2))] (6), was isolated by protonolysis of 4 with 2-OCH(3)-C(6)H(4)NH(2). All the complexes were structurally characterized by X-ray single crystal determination.     

Yttrium complexes incorporating the chelating diamides [ArN(CH2)xNAr]2- (Ar = C6H3-2,6-iPr2, x= 2, 3) and their unusual reaction with phenylsilane

Novel yttrium chelating diamide complexes [(Y[ArN(CH(2))(x)NAr](Z)(THF)(n))(y)] (Z = I, CH(SiMe(3))(2), CH(2)Ph, H, N(SiMe(3))(2), OC(6)H(3)-2,6-(t)Bu(2)-4-Me; x = 2, 3; n = 1 or 2; y = 1 or 2) were made via salt metathesis of the potassium diamides (x = 3 (3), x = 2 (4)) and yttrium triiodide in THF (5,10), followed by salt metathesis with the appropriate potassium salt (6-9, 11-13, 15) and further reaction with molecular hydrogen (14). 6 and 11(Z = CH(SiMe(3))(2), x = 2, 3) underwent unprecedented exchange of yttrium for silicon on reaction with phenylsilane to yield (Si[ArN(CH(2))(x)NAr]PhH) (x = 2 (16), 3) and (Si[CH(SiMe(3))(2)]PhH(2)).     

Structural, electrochemical and oxygen atom transfer properties of a molybdenum selenoether complex [Mo2O4(OC3H6SeC3H6O)2] and its thioether analogue [Mo2O4(OC3H6SC3H6O)2

The first crystallographically characterized molybdenum(vi) selenoether complex [Mo(2)O(4)(OC(3)H(6)SeC(3)H(6)O)(2)] and its thioether analogue [Mo(2)O(4)(OC(3)H(6)SC(3)H(6)O)(2)] were synthesised. Their structural, electrochemical and oxygen atom transfer properties are compared. This is relevant for the molybdenum cofactors of the DMSO reductase family where the coordination of the active site metal occurs through O (serine/aspartate), S (cysteine) or Se (selenocysteine). Both structures are almost identical except for those parameters that are directly derived from the different sizes of the varied ligand atoms (Se and S). No trans influence was observed. The metal centered redox process (Mo(V)<-->Mo(VI)) is at slightly lower voltage for the sulfur than for the selenium complex. The selenium compound catalyses the oxygen atom transfer from DMSO to PPh(3) by a different mechanism and at a higher rate than the sulfur compound, which is an indication that cysteine and selenocysteine might be used for a purpose in the different molybdenum and tungsten cofactors.     

Homoleptic cobalt and copper phenolate A2[M(OAr)4] compounds: the effect of phenoxide fluorination

Two series of homoleptic phenolate complexes with fluorinated aryloxide ligands A2[M(OAr)4] with M=Co2+ or Cu2+, OAr-=(OC6F5)- (OArF) or [3,5-OC6H3(CF3)2]- (OAr'), A+=K (18-crown-6)+, Tl+, Ph4P+, Et3HN+, or Me4N+ have been synthesized. Two related complexes with nonfluorinated phenoxide ligands have been synthesized and studied in comparison to the fluorinated aryloxides demonstrating the dramatic structural changes effected by modification of OPh to OAr(F). The compounds [K(18-crown-6)]2[Cu(OArF)4], 1a; [K(18-crown-6)]2[Cu(OAr')4], 1b; [Tl2Cu(OArF)4], 2a; [Tl2Cu(OAr')4], 2b; (Ph4P)2[Cu(OArF)4], 3; (nBu4N)2[Cu(OArF)4], 4; (HEt3N)2[Cu(OArF)4], 5; [K(18-crown-6)]2[Cu2(mu2-OC6H5)2(OC6H5)4], 6; [K(18-crown-6)]2[Co(OArF)4], 7a; [(18-crown-6)]2[Co(OAr')4], 7b; [Tl2Co(OArF)4], 8a; [Tl2Co(OAr')4], 8b; (Me4N)2[Co(OArF)4], 9; [Cp2Co]2[Co(OAr')4], 10; and [(18-crown-6)])[Co2(mu2-OC6H5)2(OC6H5)4], 11, have been characterized with UV-vis and multinuclear NMR spectroscopy and solution magnetic moment studies. Cyclic voltammetry was used to study 1a, 1b, 7a, and 7b. X-ray crystallography was used to characterize 1b, 3, 4, 5, 6, 7a, 7b, 10, and 11. The related [MX4]2- compound (Ph4P)2[Co(OArF)2Cl2], 12, has also been synthesized and characterized spectroscopically, as well as with conductivity and single-crystal X-ray diffraction. Use of fluorinated aryloxides permits synthesis and isolation of the mononuclear, homoleptic phenolate anions in good yield without oligomerized side products. The reaction conditions that result in homoleptic 1a and 7a with OArF upon changing the ligand to OPh result in mu2-OPh bridging phenoxides and the dimeric complexes 6 and 11. The [M(OArF)4]2- and [M(OAr')4]2- anions in 1a, 1b, 3, 4, 5, 7a, 7b, 9, and 10 demonstrate that stable, isolable homoleptic phenolate anions do not need to be coordinatively or sterically saturated and can be achieved by increasing the electronegativity of the ligand.     

Iron-arylimide clusters [Fe(m)()(NAr)(n)Cl(4)](2)(-) (m,n = 2, 2; 3, 4; 4, 4) from a ferric amide precursor: synthesis,characterization, and comparison to Fe-S chemistry

Tetrahedral FeCl[N(SiMe(3))(2)](2)(THF) (2), prepared from FeCl(3) and 2 equiv of Na[N(SiMe(3))(2)] in THF, is a useful ferric starting material for the synthesis of weak-field iron-imide (Fe-NR) clusters. Protonolysis of 2 with aniline yields azobenzene and [Fe(2)(mu-Cl)(3)(THF)(6)](2)[Fe(3)(mu-NPh)(4)Cl(4)] (3), a salt composed of two diferrous monocations and a trinuclear dianion with a formal 2 Fe(III)/1 Fe(IV) oxidation state. Treatment of 2 with LiCl, which gives the adduct [FeCl(2)(N(SiMe(3))(2))(2)](-) (isolated as the [Li(TMEDA)(2)](+) salt), suppresses arylamine oxidation/iron reduction chemistry during protonolysis. Thus, under appropriate conditions, the reaction of 1:1 2/LiCl with arylamine provides a practical route to the following Fe-NR clusters: [Li(2)(THF)(7)][Fe(3)(mu-NPh)(4)Cl(4)] (5a), which contains the same Fe-NR cluster found in 3; [Li(THF)(4)](2)[Fe(3)(mu-N-p-Tol)(4)Cl(4)] (5b); [Li(DME)(3)](2)[Fe(2)(mu-NPh)(2)Cl(4)] (6a); [Li(2)(THF)(7)][Fe(2)(mu-NMes)(2)Cl(4)] (6c). [Li(DME)(3)](2)[Fe(4)(mu(3)-NPh)(4)Cl(4)] (7), a trace product in the synthesis of 5a and 6a, forms readily as the sole Fe-NR complex upon reduction of these lower nuclearity clusters. Products were characterized by X-ray crystallographic analysis, by electronic absorption, (1)H NMR, and M?ssbauer spectroscopies, and by cyclic voltammetry. The structures of the Fe-NR complexes derive from tetrahedral iron centers, edge-fused by imide bridges into linear arrays (5a,b; 6a,c) or the condensed heterocubane geometry (7), and are homologous to fundamental iron-sulfur (Fe-S) cluster motifs. The analogy to Fe-S chemistry also encompasses parallels between Fe-mediated redox transformations of nitrogen and sulfur ligands and reductive core conversions of linear dinuclear and trinuclear clusters to heterocubane species and is reinforced by other recent examples of iron- and cobalt-imide cluster chemistry. The correspondence of nitrogen and sulfur chemistry at iron is intriguing in the context of speculative Fe-mediated mechanisms for biological nitrogen fixation.