Aerobic oxidation of primary alcohols catalyzed by copper complexes of 1,10-phenanthroline-derived ligands

Five copper complexes [(L(1))(2)Cu(H(2)O)](ClO(4))(2) (1), [(L(1))Cu(H(2)O)(3)](ClO(4))(2) (1a), [(L(3))(2)Cu(H(2)O)](ClO(4))(2) (2), [(L(5))(2)Cu(H(2)O)](ClO(4))(2) (3) and [(L(6))(2)Cu](ClO(4)) (4) (where L(1) = 1,10-phenanthroline, L(3) = 1,10-phenanthroline-5,6-dione, L(5) = 1,10-phenanthrolinefuroxan and L(6) = 2,9-dimethyl-1,10-phenanthrolinefuroxan), and in situ prepared copper complexes of 2,9-dimethyl-1,10-phenanthroline (L(2)) or 2,9-dimethyl-1,10-phenanthrolinedione (L(4)) were used for aerial oxidation of primary alcohols to the corresponding aldehydes under ambient conditions. The copper catalysts have been found to catalyze a series of primary alcohols including one secondary alcohol with moderate turnover numbers and selectivity towards primary alcohols. Copper(ii) complexes 1 (or 1a) and 2 were found to be the better catalysts among all other systems explored in this study. A copper(ii)-superoxo species is implicated to initiate the oxidation reaction. Structural and electronic factors of 1,10-phenanthroline-based ligands affecting the catalytic results for aerial oxidation of alcohols are discussed.     

A highly cis-selective synthesis of 2-ethynylaziridines by intramolecular amination of chiral bromoallenes: improvement of stereoselectivity based on the computational investigation

The base-mediated intramolecular amination of bromoallenes having an axial chirality is described. The treatment of (4S,aR)-4-alkyl-4-[N-(arylsulfonyl)amino]-1-bromobuta-1,2-dienes with NaH in DMF affords 2,3-cis-2-ethynylaziridines in good to excellent selectivity (2,3-cis:trans = 92:8-99:1). The reaction of (4S,aS)-bromoallenes with NaH/DMF also gives 2,3-cis-2-ethynylaziridines selectively (79:21-91:9). These experimental results have been rationalized by B3LYP density functional calculations together with the 6-31+G(d) basis set and the Onsager solvation model. The transition structures for cis-aziridine formation of both (4S,aR)- and (4S,aS)-bromoallenes in DMF are favored over the corresponding trans transition structures by 4.35 and 1.41 kcal/mol, respectively. Furthermore, the calculations predicted that a less polar solvent gives higher cis selectivity for (4S,aS)-bromoallenes. In fact, improvement of the cis selectivity to 99:1 has been realized by using a less polar solvent such as THF. The cyclization of bromoallenes bearing a beta- or gamma-amino group also affords four- and five-membered azacycles in a highly cis-selective manner.     

Direct catalytic asymmetric synthesis of highly functionalized (2-ethynylphenyl)alcohols via Barbas-List aldol reaction: scope and synthetic applications

A high-yielding asymmetric synthesis of functionalized (2-ethynylphenyl)alcohols 5/6 with good diastereo- and enantioselectivities was achieved by Barbas-List aldol (BLA) reaction of 2-alkynylbenzaldehydes 1 with various ketones 2 in the presence of trans-4-OH-L-proline or L-prolinamide derivative 3/4 as catalyst at the ambient temperature or -35 °C. This method also gives first time access to the novel double aldol addition compounds 6, which are of medicinal importance. Chiral functionalized (2-ethynylphenyl)alcohols 5/6 were transformed into acyclic and cyclic 1,4-triazoles 8/9 and cis-1,3-diols 10 in good yields with high selectivity through double click-reaction and Lewis acid-mediated NaBH(4) reduction respectively. Chiral products 8-10 may become good ligands and inhibitors in medicinal chemistry.     

Modular amino alcohol ligands containing bulky alkyl groups as chiral controllers for Et2Zn addition to aldehydes: illustration of a design principle

A new family of enantiomerically pure (1S,2R)-1-alkyl-2-(dialkylamino)-3-(R-oxy)-1-propanols containing a very bulky alkyl substituent (tert-butyl or 1-adamantyl) on their hydrocarbon chains has been synthesized from the corresponding enantiopure epoxy alcohols, arising from the catalytic Sharpless epoxidation, by protection of the primary hydroxy group and subsequent regioselective ring opening of the epoxide by a secondary cyclic amine (C-2 attack). The performance of these amino alcohols as ligands for the catalytic enantioselective addition of diethylzinc to benzaldehyde has been studied, with enantioselectivities of 92-96% being recorded. The best performing ligands, those with a bulky R-oxy group, also depict a convenient activity and selectivity profile in the addition of Et(2)Zn to a representative family of aldehydes. An anomalous structure/enantioselectivity relationship of some ligands in the tert-butyl series has been studied using PM3 calculations, and conclusions have been drawn on the possible effects of including in modular designs structural fragments giving rise to a variety of rotameric transition states.     

Competitive and selective Csp3-Br versus Csp2-Br bond activation in palladium-catalysed Suzuki cross-coupling: an experimental and theoretical study of the role of phosphine ligands

Phosphine ligands have been demonstrated to have an effect on reactivity and selectivity in the competitive intramolecular palladium-catalysed Suzuki-Miyaura coupling of dibromo sulfoxide 1a possessing two different hybridised electrophilic carbons. It was found that the bromine bond to the sp(3)-hybridised carbon is selectively replaced in the presence of unhindered phosphines such as PPh(3) or xantphos. The use of hindered phosphine ligands such as P(o-tol)(3) and P(1-naphthyl)(3) reversed the selectivity, conducting the cross-coupling at the Csp(2)-Br. Identical trends were observed in external competition experiments carried out with bromomethyl sulfoxide and different substituted bromoarenes. DFT and DFT/MM calculations showed that the selectivity observed is mainly due to the different facility of the ligands to dissociate. Bisphosphine catalysts favour coupling at the sp(3) carbon, whereas monophosphine catalysts prefer the sp(2) carbon.     

Diastereoselective addition of gamma-substituted allylic nucleophiles to ketones: highly stereoselective synthesis of tertiary homoallylic alcohols using an allylic tributylstannane/stannous chloride system

The diastereoselective addition of gamma-substituted allylic nucleophiles to ketones has been accomplished to give tertiary homoallylic alcohols. The reaction of tributylcinnamyltin 1a with simple ketones 2 in the presence of stannous chloride (SnCl(2)) gave the tertiary homoallylic alcohols 3, which include the anti form (based on Ph and OH), with high diastereoselectivity. In the reaction course, transmetalation of tributylcinnamyltin 1a with SnCl(2) proceeds to form an active nucleophile which is tentatively considered to be a cinnamyltin(II) species. A cyclic transition state A is favorable because the chlorinated tin(II) center is highly capable of accepting ligands. The other diastereomers (syn form) 4 were obtained in the reaction of tributylcinnamyltin 1a with ketones 2 by the use of BF(3) x OEt(2) instead of SnCl(2). This reaction proceeds through an acyclic transition state in which BF(3) acts as a Lewis acid for activation of ketones. When 3-tributylstannylcyclohexene 1b or 3-tributylstannylcyclopentene 1c was used with SnCl(2), high diastereoselective formation of the corresponding homoallylic alcohols 6 which have the syn form (based on ring chain and OH) was observed. The selectivity was also explained by the cyclic transition state B. When tributylcrotyltin 1d or 1e was used, the stereochemistry of the products depends on the additives (SnCl(2) or BF(3) x OEt(2)), substituents of ketones, and reaction temperature. It is interesting that those additives compensate for each other in terms of diastereoselective alkylation. The alkylation of alpha-alkoxy, aryloxy, or hydroxyketones 16 was achieved in extremely high selectivity using an allylic tributyltin 1a-c/SnCl(2) system. The chelation by carbonyl and beta-oxygens provides a rigid transition state (E or F) for selective reactions. It is noted that the hydroxyketone can be used without protection in this reaction system. The relative stereochemistry of the produced tertiary homoallylic alcohols was determined on the basis of X-ray analyses.     

Synthesis and crystal structure of a chiral lactam and three amino alcohols as potential protein tyrosine phosphates 1B inhibitors

Chiral lactam 2 and three chiral β-amino alcohols 3–5 have been synthesized and characterized by spectroscopic techniques. Regioselective ring opening reaction of chiral styrene oxide by an amine nucleophile was confirmed by X-ray diffraction data. Ligand 2–4 crystallizes in the tetragonal, orthorhombic and tetragonal crystal lattice system respectively. Ligands 2–6 have been used as potential inhibitors for protein tyrosine phosphatase 1B enzyme (PTP1B). The potential inhibitor effect of these molecules to the target protein was investigated by Dock and molecular dynamics calculations. Dock score analysis and Lipinski parameters suggested that ligands 1, 2, 4–6 are potential inhibitors towards PTP1B, thus indicating that the residues Arg24, Arg254 and Met258, Asp29 in the second active site of PTP1B are essential for the high selectivity of inhibitors. The results indicate that the polar hydrogen bonding interacts with Asp29, Gln102, and the amino acid residues of PTP1B are responsible for governing inhibitory potency of ligands 1–6.     

Less symmetrical dicopper(II) complexes as catechol oxidase models--an adjacent thioether group increases catecholase activity

Three new unsymmetrical compartmental dinucleating ligands, 4-bromo-2-(4-methylpiperazin-1-ylmethyl)-6-[{2-(1-piperidyl)ethyl}aminomethyl]phenol (HL1), 4-bromo-2-(4-methylpiperazin-1-ylmethyl)-6-[{2-(morpholin-4-yl)ethyl}aminomethyl]phenol (HL2), and 4-bromo-2-(4-methylpiperazin-1-ylmethyl)-6-[{2-(thiomorpholin-4-yl)ethyl}aminomethyl]phenol (HL3), have been synthesized in order to model the active site of type 3 copper proteins. The dicopper(II) complexes of these ligands give first hints about the influence of a thioether group close to the metal site. The bromophenol-based ligands have one piperazine arm and one other bidentate arm in positions 2 and 6 of the phenolic ring, respectively. With each ligand a dinuclear copper(II) complex was prepared and structurally characterized. The copper ions were found to have square pyramidal environments and a mixture of endogenous phenoxo and exogenous acetate bridging. The influence of a heteroatom in one arm of the ligand on catecholase activity and speciation in solution was studied by UV/Vis spectroscopy, ESI-MS experiments and, DFT calculations.     

Chiral organometallic triangles with Rh-Rh bonds. 2. Compounds prepared from enantiopure cis-Rh2(C6H4PPh2)2(OAc)2(HOAc)2 and their catalytic potentials

Enantiomers of the orthometalated dirhodium compound cis-Rh2(C6H4PPh2)2(OAc)2(HOAc)2 (R-1 and S-1) were prepared from carboxylate exchange reactions of the resolved diasteroisomers of cis-Rh2(C6H4PPh2)2(protos)2(H2O)2 (protos = N-4-methylphenylsulfonyl-l-proline anion) and acetic acid. These compounds react with excess Me3OBF4 in CH3CN, producing the enantiomers of [cis-Rh2(C6H4PPh2)2(CH3CN)6](BF4)2 (R-2 and S-2) which have six labile and replaceable CH3CN ligands in equatorial and axial positions. Reactions of R-2 and S-2 with tetraethylammonium salts of the linear dicarboxylic acids, terephthalic acid (HO2CC6H4CO2H), oxalic acid (HO2CCO2H), and 4,4'-diphenyl-dicarboxylic acid (HO2CC6H4C6H4CO2H) afford the enantiopure triangular supramolecules [cis-Rh2(C6H4PPh2)2(O2CC6H4CO2)(py)2]3, RRR-3 and SSS-3, Rh6(cis-C6H4PPh2)6(O2CCO2)3(py)5(CH2Cl2), RRR-4 and SSS-4, and Rh6(cis-C6H4PPh2)6(O2CC6H4C6H4CO2)3(py)4(CH2Cl2)2, RRR-5 and SSS-5, respectively. The absolute structures of each of the enantiomers of 1, 3, 4, and 5 were determined by X-ray diffraction analyses. The enantiomers of 3, 4, and 5 were found to be enantiomorphically isostructural, whereas R-1 and S-1 crystallized in different space groups. In 4 and 5, CH2Cl2 molecules coordinate to rhodium atoms in the axial positions. The 1H and 31P[1H] NMR spectra of all compounds are reported. The triangular compounds are redox-active, and their electrochemistry is also discussed. An assay of the catalytic activity/selectivity performance of the triangles for typical metal carbene transformation, using the model intermolecular cyclopropanation of styrene with ethyl diazoacetate in both homogeneous and heterogeneous phases, show that these chiral triangles are very active and have remarkable selectivity when compared with simple Rh2 paddle-wheel catalysts with chiral amidate ligands.     

Synthesis of fluorine and iodine analogues of clorgyline and selective inhibition of monoamine oxidase A

A series of fluorine and iodine analogues of clorgyline was synthesized and evaluated for inhibitory potency and selectivity toward monoamine oxidase A (MAO-A). Among them, N-[3-(2,4-dichloro-6-iodophenoxy)propyl]-N-methyl-2-propynylami ne (3d), N-[3-(4-chloro-2-fluorophenoxy)propyl]-N-methyl-2-propynylamine (3f) and N-[3-(2-chloro-4-fluorophenoxy)propyl]-N-methyl-2-propynylamine (3g) were found to have high inhibitory potency and selectivity toward MAO-A comparable to those of clorgyline itself. Thus, they were considered for advanced development as radiofluorinated and radioiodinated ligands that may be useful for functional MAO-A studies in the living brain with positron emission tomography and single photon emission computer tomography.     

Urease inhibition and anti-leishmanial assay of substituted benzoylguanidines and their copper(II) complexes

A series of N,N',N'-trisubstituted guanidines (1-6) and their copper(II) complexes, [κ(2)(O,N)-C(6)H(5)CONHC(NHC(6)H(4)Cl)NR](2)Cu(ii) (R = iso-propyl (1a), n-butyl (2a), sec-butyl (3a), tert-butyl (4a), benzyl (5a), and para-tolyl (6a)) were synthesized and characterized using elemental analysis, FTIR and NMR spectroscopy. DFT studies were used to assess the location of the protons in the free ligands. However, calculations have shown that, in all cases, hydrogen bonding from either N-H group gives conformations that are very similar in energy. Single crystal XRD studies were used to characterize ligands 1 and 4 and the related complexes 1a and 4a. The structures reveal that these complexes are mononuclear in the solid state and that copper adopts a regular square planar geometry. In both metallic species, the N, N', N'-trisubstituted guanidine ligands chelate the Cu(II) atom using the oxygen and one nitrogen. The synthesized compounds were investigated for urease inhibition using thiourea as a standard drug. Most complexes exhibit a better activity than the respective guanidines and compound 1a was found to be the most active with IC(50) = 9.83 ± 0.07 μM (the IC(50) for thiourea is 21.0 ± 0.1 μM). The species were also screened for their anti-leishmanial activity. However, all of the compounds were devoid of any significant activity.     

Bicyclo[3.2.1]octa-3,6-dien-2-yl cation: a bishomoantiaromate

Antiaromatic compounds with a closed loop of 4n p-electrons are relatively unstable and often difficult to study. We report in this article the synthesis of alcohols 2-(4'-fluorophenyl)bicyclo[3.2.1]octan-2-ol 11, 2-(4'-fluorophenyl)bicyclo[3.2.1]oct-3-en-2-ol 12, and 2-(4'-fluorophenyl)bicyclo[3.2.1]octa-3,6-dien-2-ol 13 and their transformations into corresponding carbocations 14-16, respectively, in a superacidic medium (FSO3H/SO2ClF) at -120 degrees C. Cations 14-16 are characterized by NMR analysis (1H, 13C, 19F), and 15 and 16 are further characterized by quenching in NaOCH3/H3COH at -120 degrees C. The relative stabilities of 14-16 are determined experimentally by 19F NMR spectroscopy. Cation 16 is found to be experimentally less stable than cation 15 by 3.7 kcal/mol. DFT calculations (structure and energy: B3LYP/6-31G(d); NMR: B3LYP/6-311+G(2d,p)) are performed for alcohols 11-13 and bicyclo[3.2.1]octyl cations 6, 7, 9, 14-16, 26, 28, and 30. In the case of 11-16, data from DFT calculations is in good agreement with experimental data. Because 6,7-dimethylenebicyclo[3.2.1]oct-3-en-2-yl cation 26 is more stable than cation 7 by 1.69 kcal/mol, the inductive effect of sp(2)-hybridized carbon atoms C6 and C7 in carbocations 6 and 16 cannot be the reason for the destabilization of 6 relative to 7 and 16 relative to 15. Destabilization of 6 relative to 7 and 16 relative to 15 and the calculated NICS of 6 (+4.17 ppm) and 16(+3.3 ppm) document that 6 and 16 are bishomoantiaromates.     

Insertion of CO2, ketones, and aldehydes into the C-Li bond of 1,3,5-triaza-7-phosphaadamantan-6-yllithium

The synthesis and structures of a series of new water-soluble phosphine ligands based on 1,3,5-triaza-7-phosphaadamantane (PTA) are described. Insertion of aldehydes or ketones into the C-Li bond of 1,3,5-triaza-7-phosphaadamantan-6-yllithium (PTA-Li) resulted in the formation of a series of slightly water-soluble beta-phosphino alcohols (PTA-CRR'OH, R = C6H5, C(6)H(4)OCH(3), ferrocenyl; R' = H, C(6)H(5), C(6)H(4)OCH(3)) derived from the heterocyclic phosphine PTA. Insertion of CO(2) yielded the highly water-soluble carboxylate PTA-CO(2)Li, S(2)5 degrees approximately 800 g/L. The compounds have been fully characterized in the solid state by X-ray crystallography and in solution by multinuclear NMR spectroscopy. The addition of PTA-Li to symmetric ketones results in a racemic mixture of PTA-CR(2)OH ligands with a single resonance in the (31)P{(1)H} NMR spectrum between -95 and -97 ppm. The addition of PTA-Li to aldehydes results in a mixture of diasteromeric compounds, PTA-CHROH, with two (31)P{(1)H} NMR resonances between -100 and -106 ppm. Three (eta(6)-arene)RuCl(2)(PTA-CRR'OH) complexes of these ligands were synthesized and characterized, with the ligands binding in a kappa1 coordination mode. All the ligands and ruthenium complexes are slightly soluble in water with S25 degrees = 3.9-11.1 g/L for the PTA-CRR'OH ligands and S(25) degrees = 3.3-14.1 g/L for the (eta(6)-arene)RuCl(2)(PTA-CRR'OH) complexes.     

Design, synthesis and evaluation of diazadibenzocrown ethers as Pb(2+) extractants and carriers in plasticized cellulose triacetate membranes

The ligands 4,7-diaza-2,3,8,9-dibenzo-15-crown-5 (L1), 4,10-diaza-2,3,11,12-dibenzo-18-crown-6 (L2), 4,10-diaza-2,3,11,12-di(4′-tert-butylbenzo)-18-crown-6 (L3) and N,N-di(methylenecarboxyethoxy) 4,10-diaza-2,3,11,12-dibenzo-18-crown-6 (L4) have been prepared. Partition coefficients and acid dissociation constants for these four diazadibenzocrown ether compounds were determined in water-chloroform. Their effectiveness was assessed in solvent extraction of Pb²⁺ from aqueous solutions into toluene. Ligands L3 and L4 provide high selectivity for Pb²⁺ over Cd²⁺ and Zn²⁺ in transport across plasticized cellulose triacetate membranes.     

Effective catalytic oxidation of alcohols and alkenes with monomeric versus dimeric manganese(II) catalysts and t‐BuOOH

Two new Mn(II) complexes, [Mn(C₆H₅COO)(H₂O)(phen)₂](ClO₄)(CH₃OH) ( 1 ) and [Mn₂(μ‐C₆H₅COO)₂(bipy)₄]?2(ClO₄) ( 2 ) (phen = 1,10‐phenanthroline; bipy = 2,2′‐bipyridine), were synthesized and characterized using UV–visible and infrared spectroscopies and single‐crystal X‐ray diffraction analyses. Complexes 1 and 2 have six‐coordinate octahedral geometry around the Mn(II) centre. Complex 1 is a monomer and consists of a deprotonated monodentate benzoate ligand together with two neutral bidentate amine ligands (phen) and a water molecule. Complex 2 has a dinuclear structure in which two Mn(II) ions share two carboxylate groups, adopting a two‐atom bridging mode, and two chelated bipy ligands. Both complexes catalyse the oxidation of alcohols and alkenes in a homogeneous catalytic system consisting of the Mn(II) complex and tert‐butyl hydroperoxide (TBHP) in acetonitrile. The system yields good to quantitative conversions of various alkenes and alcohols, such as styrene, ethylbenzene and cyclohexene to their corresponding ketones, and primary alcohols and 1‐octanol, 1‐heptanol, cyclohexanol, benzyl alcohols and cinnamyl alcohol to their corresponding aldehydes and carboxylic acids. Complexes 1 and 2 exhibit very high activity in the oxidation of cyclohexene to cyclohexanone (ca 80% selectivity) as the main product (ca 94% conversion in 1 h) and of cinnamyl alcohol to cinnamaldehyde (ca 64% selectivity) as the main product (ca 100% conversion in 0.5 h) with TBHP at 70°C in acetonitrile. In addition, optimum reaction conditions were also determined for benzyl alcohol with complexes 1 and 2 and TBHP. Copyright © 2016 John Wiley & Sons, Ltd.     

Noncovalent interactions of Zn+ with N-donor ligands (pyridine, 4,4'-dipyridyl, 2,2'-dipyridyl, and 1,10-phenanthroline): collision-induced dissociation and theoretical studies

The binding interactions in complexes of Zn(+) with nitrogen donor ligands, (N-L) = pyridine (x = 1-4), 4,4'-dipyridyl (x = 1-3), 2,2'-dipyridyl (x = 1-2), and 1,10-phenanthroline (x = 1-2), are examined in detail. The bond dissociation energies (BDEs) for loss of an intact ligand from the Zn(+)(N-L)(x) complexes are reported. Experimental BDEs are obtained from thermochemical analyses of the threshold regions of the collision-induced dissociation cross sections of Zn(+)(N-L)(x) complexes. Density functional theory calculations at the B3LYP/6-31G* level of theory are performed to determine stable structures of these species and to provide molecular parameters needed for the thermochemical analysis of experimental data. Relative stabilities of the various conformations of these N-donor ligands and their complexes to Zn(+) as well as theoretical BDEs are determined from single point energy calculations at the B3LYP/6-311+G(2d,2p) and M06/6-311+G(2d,2p) levels of theory using the B3LYP/6-31G* optimized geometries. The experimental BDEs for the Zn(+)(N-L)(x) complexes are in reasonably good agreement with values derived from density functional theory calculations. BDEs derived from M06 calculations provide better agreement with the measured values than those based on B3LYP calculations. Trends in the sequential BDEs are explained in terms of sp polarization of Zn(+) and repulsive ligand-ligand interactions. Comparisons are made to the analogous Cu(+)(N-L)(x) and Ni(+)(N-L)(x) complexes previously studied.     

Nitrilases catalyze key step to conformationally constrained GABA analogous gamma-amino acids in high optical purity

Five- and six-membered carbocyclic gamma-amino acids were prepared in high enantiomeric purity by nitrilase-mediated transformation of hitherto unreported gamma-amino nitriles. The nitrilases investigated reveal a strong enantiopreference for cis-isomers (up to 99% ee), whereas trans-isomers were available in up to 86% ee. The biocatalytic enantioselective syntheses of cis-3-aminocyclohexanecarboxylic acid (3b), trans-3-aminocyclohexanecarboxylic acids (4b, 6b, 8b) as well as trans-3-aminocylopentanecarboxylic acid (2b) are hereby reported for the first time.     

Ce-Cu-Co/CNTs催化剂催化合成气制低碳醇及乙醇的研究

采用共浸渍法制备了不同Ce含量的Ce-Cu-Co/CNTs催化剂,考察了其在合成气制低碳醇反应中的催化性能,借助X射线衍射(XRD)、程序升温还原(H2-TPR)、N2吸脱附实验(BET)、透射电镜(TEM)和CO程序升温脱附(CO-TPD)对这些催化剂进行了表征.结果表明,当Ce的质量分数为3%时,低碳醇的时空收率和选择性达到最高,分别为696.4 mg?g-1?h-1和59.7%,其中乙醇占总醇的46.8%,适量Ce的添加能提高Cu物种在催化剂上的分散度和催化剂的还原性能,能显著地增加催化剂吸附CO的能力,促进合成醇活性位的形成,进而明显提高催化剂的活性和总醇的选择性.研究表明,将具有高活性和高碳链增长能力的CuCo基催化剂与碳纳米管的限域效应结合,可实现缩窄产物分布、大幅度提高乙醇选择性的目的.     

Structure-activity relationships of alphaS1-casomorphin using AM1 calculations and molecular dynamics simulations

This paper investigates the structure-activity relationships of alphaS1-casomorphin (alphaS1-CM) using AM1 calculations and molecular dynamics (MD) simulations. Previous studies have shown that this peptide has remarkable opioid actions, and not only has a high affinity toward all three subtypes (kappa1-kappa3) of the kappa-opioid sites, but also inhibits the proliferation of the T47D human breast cancer cell line. The systematic conformer search performed by the AM1 calculations is based on the torsional angles of the Val2-Pro3 (omega2) and Phe4-Pro5 (omega4) amide bonds. The AM1 results reveal that the alphaS1-CM conformers strongly favor the cis/cis pair of the omega2/omega4 amide bonds in the minimized energy state. Furthermore, the picture of these stable conformers is found to be a strong interaction of the coulomb's force between two terminuses. MD simulations are performed to investigate the features of both the structural stability and pharmacological activity of alphaS1-CM in aqueous solution. The simulation results reveal that the omega2/omega4 amide bonds favor the cis/cis status in the stable state. Furthermore, the pharmacophoric distance between two aromatic rings is found to be 5.0 approximately 5.4A. The chi1 rotamers of the Tyr and Phe residues show a preference for gauche (-) and trans, respectively. The side chain rotamers of alphaS1-CM are competed to those of other opioid ligands with a known potency and selectivity for delta- and mu-opioid receptors. Finally, we address a likely kappa pharmacophore model compared to the delta pharmacophore model.     

Controlled Release of Perfumery Alcohols by Neighboring‐Group Participation. Comparison of the Rate Constants for the Alkaline Hydrolysis of 2‐Acyl‐, 2‐(Hydroxymethyl)‐, and 2‐Carbamoylbenzoates

A series of 2‐acylbenzoates 1 and 2 , 2‐(hydroxymethyl)benzoates 3 , 2‐carbamoylbenzoates 4 – 6 , as well as the carbamoyl esters 7 or 8 of maleate or succinate, respectively (see Fig. 2), were prepared in a few reaction steps, and the potential use of these compounds as chemical delivery systems for the controlled release of primary, secondary, and tertiary fragrance alcohols was investigated. The rate constants for the neighboring‐group‐assisted alkaline ester hydrolysis were determined by anal. HPLC in buffered H₂O/MeCN solution at different pH (Table 1). The rates of hydrolysis were found to depend on the structure of the alcohol, together with the precursor skeleton and the structure of the neighboring nucleophile that attacks the ester function. Primary alcohols were released more rapidly than secondary and tertiary alcohols, and benzoates of allylic primary alcohols (e.g., geraniol) were hydrolyzed 2–4 times faster than their homologous saturated alcohols (e.g., citronellol). For the same leaving alcohol, 2‐[(ethylamino)carbonyl]benzoates cyclized faster than the corresponding 2‐(hydroxymethyl)benzoates, and much faster than their 2‐formyl and 2‐acetyl analogues (see, e.g., Fig. 4). Within the carbamoyl ester series, 2‐[(ethylamino)carbonyl]benzoates were found to have the highest rate constants for the alkaline ester hydrolysis, followed by unsubstituted 2‐(aminocarbonyl)benzoates, or the corresponding isopropyl derivatives. To rationalize the influence of the different structural changes on the hydrolysis kinetics, the experimental data obtained for the 2‐[(alkylamino)carbonyl]benzoates were compared with the results of density‐functional computer simulations (Table 2 and Scheme 4). Based on a preliminary semi‐empirical conformation analysis, density‐functional calculations at the B3LYP/6‐31G** level were carried out for the starting precursor molecules, several reaction intermediates, and the cyclized phthalimides. For the same precursor skeleton, these simple calculations were found to model the experimental data correctly. With an understanding of the influence of structural parameters on the rate constants obtained in this work, it is now possible to influence the rates of hydrolysis over several orders of magnitude, to design tailor‐made precursors for a large variety of fragrance alcohols, and to predict their efficiency as controlled‐release systems in practical applications.