单分散SiO2/PS复合粒子的制备

聚合物包覆无机物的核一壳结构复合粒子研究长期以来受到关注,源于其应用广泛．根据表面性质要求对无机相或者有机相表面进行功能化,可使得到的复合粒子与不同的应用体系相匹配．这类聚合物包覆无机物的有机／无机复合粒子,已在光学器件、分离、药品、农业、涂料等很多领域有广泛和潜在应用．本文制备这类复合粒子用于石油工业模型催化剂和助剂．     

Anchoring of polyacrylate onto silica and formation of polyacrylate/silica nanocomposite particles via in situ emulsion polymerization

Polyacrylate/silica nanocomposite latex particles were prepared by in situ emulsion polymerization of acrylate monomers initiated by 2,2′-azobis(2-amidinopropane)dihydrochloride (AIBA) adsorbed by silica nanoparticles. The anchoring of polyacrylate (ACR) onto silica nanoparticles was achieved through the physical absorption and chemical grafting reaction. The elution and HF etching experiments showed that most silica nanoparticles were encapsulated by ACR to form the raspberry-like ACR/silica nanocomposite latex particles. The silica nanoparticles with a greater grafting degree of ACR tended to locate in the bulk of the polymer, and the silica particle with a lower grafting degree would not be combined with polymer latex particles and always remained in water phase. The formation of the final ACR/silica nanocomposite latex particles included the anchoring of ACR onto silica primary particles, aggregation of silica primary particles to form the silica-containing latex particles, and the growth of latex particles.     

高分散性SiO2/PMMA复合材料的制备与表征——纳米SiO2在MMA中的分散

用硅烷偶联剂3-(甲基丙烯酰氧)丙基三甲氧基硅烷(MPS)对分散于乙醇中的纳米SiO2进行偶联改性,再通过介质置换和原位本体聚合制得SiO2/甲基丙烯酸甲酯(MMA)单体分散液和SiO2/PMMA复合材料.红外光谱分析(FTIR)和热重分析(TG)结合洗提实验考察了SiO2表面MPS的偶联率和偶联效率,透射电镜(TEM...     

甲基丙烯酸甲酯/纳米SiO_2粒子分散液的细乳化和细乳液聚合

对包含纳米SiO2粒子的甲基丙烯酸甲酯(MMA)的细乳化和细乳液聚合行为进行了研究.发现在超声细乳化过程中,90%以上的分散于MMA相的纳米SiO2粒子将从油相逃逸到水相.采用甲基丙烯酸3-(三甲氧基甲硅烷基)丙酯(MPS)偶联剂处理SiO2粒子,可以增加其表面亲油性,抑止这种逃逸,经测定几乎全部SiO2粒子在超声细乳化后仍稳定停留在细乳化亚微液滴中.通过进一步细乳液聚合,得到了分散稳定、界面清晰的包裹有纳米SiO2粒子的聚甲基丙烯酸甲酯复合粒子乳液.     

硅胶基质高效液相色谱填料研究进展

高效液相色谱(HPLC)不仅是一种有效的分析分离手段,也是一种重要的高效制备分离技术。色谱柱是HPLC系统的核心,不同性能的填料是HPLC广泛应用的基础。硅胶是开发最早、研究最为深入、应用最为广泛的HPLC固定相基质,其制备方法主要有喷雾干燥法、溶胶-凝胶法、聚合诱导胶体凝聚法及模板法等。近年来,亚2μm小粒径硅胶、核-壳型硅胶、双孔径硅胶、介孔性硅胶、有机杂化硅胶等新型硅胶应用于HPLC并取得了色谱分离技术的飞速发展,例如基于亚2μm填料的超高压液相色谱技术、基于核-壳型填料的快速分离技术、基于杂化硅胶填料的高温液相色谱技术等。硅胶经表面化学键合、聚合物包覆等有机改性可制得先进的大分子限进填料、温敏性填料、手性填料等,大大扩展了HPLC的应用范围。本文对液相色谱用硅胶的制备方法、改性与修饰方法以及硅胶基质固定相的评价方法加以系统综述,概述了新型硅胶在HPLC中的应用进展,并对硅胶基质填料的发展方向与应用前景进行了展望。     

A new continuous fluorometric assay for acetylcholinesterase activity and inhibitor screening with emissive core-shell silica particles containing tetraphenylethylene fluorophore

Emissive core-shell silica particles with tetraphenylethylene moieties were prepared and characterized. Fluorescence quenching was observed for the silica particles upon addition of compound 2 (Dabcyl-ACh). This was attributed to the electrostatic interaction between the silica particles and 2 and the resulting photoinduced energy transfer between them. After incubation with AChE, the fluorescence intensity started to increase. The fluorescence enhancement became more significant when the concentration of AChE was higher. The reaction kinetic parameters for AChE were successfully estimated with the silica particles and 2. These results reveal that the ensemble of the silica particles and 2 can be utilized for AChE assay. Moreover, the fluorescence spectra of the ensemble of the silica particles and 2 containing AChE were also measured after further addition of either neostigmine or tacrine which are typical inhibitors of AChE. The results manifest that the ensemble of the emissive silica particles and 2 is also useful for screening the inhibitors of AChE.     

Structure control in PMMA/silica hybrid nanoparticles by surface functionalization

Hydrophilic silica particles need to be hydrophobized to be encapsulated in a polymeric environment, which can be achieved by different methods. We report on the relationship between different hydrophobization techniques of silica and the final structure of poly(methyl methacrylate)/silica hybrid nanoparticles obtained by miniemulsion polymerization. Hydrophobization by cetyltrimethylammonium chloride (CTMA-Cl) uses the ionic interaction between the positively charged ammonium salt and the negatively charged silica surface, as shown by isothermal titration calorimetry. In this case, the interaction between polymer and silica surface needs to be enhanced, so 4-vinylpyridine (4-VP) was used as a co-monomer. Alternatively, the condensation reactions of 3-methacryloxypropyltrimethoxysilane (MPS) and octadecyltrimethoxysilane (ODTMS) were used to provide a covalent bond to the silica surface. The condensation reaction of the trimethoxysilane groups onto the silica surface was proven by Fourier transform infrared spectroscopy and thermogravimetric analysis. Hybrid nanoparticles were successfully formed with silica particles functionalized with the different functionalization agents. However, the structure of the resulting hybrid particles (i.e., the distribution of the silica particles within the polymer matrix) depends on the agent. The MPS-functionalized silica particles copolymerize with poly(methyl methacrylate), leading to a fixation of the silica particles inside the polymer and to a homogeneous distribution. The CTMA-Cl- and ODTMS-functionalized silica particles cannot copolymerize, but aggregate at the interface, leading to a Janus-like structure.     

Determination of silica coating efficiency on metal particles using multiple digestion methods

Nano-sized metal particles, including both elemental and oxidized metals, have received significant interest due to their biotoxicity and presence in a wide range of industrial systems. A novel silica technology has been recently explored to minimize the biotoxicity of metal particles by encapsulating them with an amorphous silica shell. In this study, a method to determine silica coating efficiency on metal particles was developed. Metal particles with silica coating were generated using gas metal arc welding (GMAW) process with a silica precursor tetramethylsilane (TMS) added to the shielding gas. Microwave digestion and Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP-AES) were employed to solubilize the metal content in the particles and analyze the concentration, respectively. Three acid mixtures were tested to acquire the appropriate digestion method targeting at metals and silica coating. Metal recovery efficiencies of different digestion methods were compared through analysis of spiked samples. HNO₃/HF mixture was found to be a more aggressive digestion method for metal particles with silica coating. Aqua regia was able to effectively dissolve metal particles not trapped in the silica shell. Silica coating efficiencies were thus calculated based on the measured concentrations following digestion by HNO₃/HF mixture and aqua regia. The results showed 14-39% of welding fume particles were encapsulated in silica coating under various conditions. This newly developed method could also be used to examine the silica coverage on particles of silica shell/metal core structure in other nanotechnology areas.     

草莓型SiO2/PMMA纳米复合微球的制备

在纳米二氧化硅水分散体系中,借助于碱性辅助单体1-乙烯基咪唑(1-VID)与未改性纳米二氧化硅表面羟基之间的酸-碱作用,通过1-VID与甲基丙烯酸甲酯(MMA)的自由基共聚合,制备了草莓型的SiO2/PMMA复合微球.整个反应过程中,纳米二氧化硅无需表面处理,体系中无需另外加入乳化剂或助乳化剂,微球表面吸附的纳米二氧化硅对颗粒起稳定作用.用动态光散射粒度分布仪测得复合微球粒径在120-330nm之间,热重分析结果表明,复合微球中二氧化硅含量介于15%-20%之间.透射电镜和扫描电镜显示所得复合微球具有草莓型结构,二氧化硅富集在表面.     

Determination of the pore connectivity and pore size distribution and pore spatial distribution of porous chromatographic particles from nitrogen sorption measurements and pore network modelling theory

The pore connectivity, pore size distribution and pore spatial distribution of the porous structure of native and silanized silica particles were determined by matching the experimental nitrogen sorption data with the theoretical results obtained from pore network model simulations. The agreement between theory and experiment is found to be good. The results clearly indicate that the deposition of the silane layer to the pore surfaces of the native silica particles produces a silanized silica particle with a mean pore diameter and pore connectivity smaller than that of the native silica particle. Furthermore, the evaluation of the pore diffusivity of ribonuclease under unretained conditions shows that the lower values of the pore connectivity found in the samples of silanized silica particles, when compared with the values of the pore connectivity obtained for the native silica particles, increase the diffusional mass transfer resistance within the porous structure of the silanized silica particles.     

Synthesis of raspberry‐like silica/polystyrene/silica multilayer hybrid particles via miniemulsion polymerization

Organic–inorganic hybrid particles have many potential applications, but almost all research has been focused on hybrid particles with one kind of inorganic nanoparticle. This article presents a novel and facile preparation approach for raspberry‐like silica/polystyrene/silica multilayer hybrid particles via miniemulsion polymerization. In this method, larger, surface‐modified silica particles are first dispersed into monomer droplets to form a miniemulsion, and then raspberry‐like silica/polystyrene/silica multilayer hybrid particles are directly obtained when miniemulsion polymerization is performed in the presence of smaller, unmodified silica particles with 4‐vinylpyridine as an auxiliary monomer. Influential parameters such as the amount of 4‐vinylpyridine, the surfactant concentration, and the pH value of the system have been investigated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1028–1037, 2007     

ATRP技术用于热敏性高聚物在硅胶表面的接枝

在超细硅胶表面引入原子转移自由基聚合(ATRP)的引发基团,通过ATRP技术使N-异丙基丙烯酰胺(NIPAM)在硅胶表面接枝聚合,合成得到了具有温敏性的核-壳复合微粒.通过FTIR,TG,EA,SEM,DSC等分析方法对接枝前后的复合粒子进行了分析与表征,结果证明聚N-异丙基丙烯酰胺(PNIPAM)接在了硅胶表面.TG分析得出PNIPAM在硅胶表面的接枝率达到25.2%;DSC分析表明复合硅胶具有温度敏感性,在34.1℃时发生相转变行为;GPC分析得出从复合硅胶表面"劈下"的聚合物PNIPAM的数均分子量约为8000,分子量分布为1.06.复合微粒表面均匀平坦,显示出活性聚合的优越性.     

一种可精确控制粒径的SiO2微球合成方法

用改进的种子法合成SiO2微球. 微球生长过程中连续缓慢添加正硅酸乙酯,使用动态光散射法实时监控微球粒径的增长过程,调节正硅酸乙酯的添加,实现对粒径的精确控制. 为制备禁带位置位于1000 nm 的光子晶体,合成粒径为446 nm的SiO2微球,微球粒径在4 h内从193 nm 增长到446 nm,远远快于传统种子法,微球粒径与目标粒径偏差为±5 nm. 制得的SiO2微球被组装为光子晶体,其禁带位置恰好位于1000 nm.     

Synthesis of ellipsoidal hematite/silica/polymer hybrid materials and the corresponding hollow polymer ellipsoids

Ellipsoidal trilayer hematite/silica/poly(divinylbenzene) hybrid particles were prepared by distillation precipitation polymerization of divinyl benzene (DVB) in the presence of hematite/3-(methacryloxy)propyl trimethoxysilane (MPS)-modified silica (SiO(2)) core-shell particles as the seeds. The polymerization of DVB was performed in neat acetonitrile with 2,2'-azobisisobtyronitrile (AIBN) as initiator to coat the hematite/MPS-modified SiO(2) seeds through the capture of DVB oligomer radicals with the aid of a vinyl group on the surface of the hematite/MPS-modified silica core-shell particles in the absence of any stabilizer or surfactant. The other hematite/silica/polymer trilayer hybrid particles with different polarity and various functionality, such as hematite/silica/poly(ethylene glycol dimethacrylate) and hematite/silica/poly(divinyl benzene- co-methacrylic acid) could also be prepared by this procedure. Hematite/silica/poly( N, N'-methylenebisacrylamide) composite particles could be prepared with unmodified hematite/silica particles as seeds. Hollow poly(divinyl benzene) (PDVB) and poly( N, N'-methylenebisacrylamide) (PMBAAm) ellipsoids with movable hematite cores were subsequently developed after the selective etching of the silica midlayer in diluted hydrofluoric acid from hematite/silica/PDVB and hematite/silica/PMBAAm trilayer hybrids. Hollow PDVB ellipsoids were obtained by removal of the silica midlayer and hematite core of the trilayer hybrids with concentrated HF solution. The resultant trilayer hybrid particles and hollow polymer ellipsoids were characterized by transmission electron microscopy and vibrating sample magnetometer.     

高分散性SiO_2/PMMA复合材料的制备与表征——稀释分散性

以高无机含量SiO2/聚甲基丙烯酸甲酯(PMMA)接枝复合材料为预分散母料,与PMMA树脂进行熔融共混,制得低无机含量的SiO2/PMMA复合材料.通过切片透射电镜(TEM)观察熔融共混过程中预分散母料内堆积SiO2粒子分散状态的演化.发现预分散母料接枝状态对其影响最为显著,不经接枝修饰的SiO2粒子经熔融共混后,不可避免地会在熔体中产生大量亚微米级的立体团聚体;复杂接枝预分散母料内构成以SiO2粒子为交联点的立体交联结构,其中的堆积SiO2粒子不能在剪切场中得到有效解离和释放;只有在使用简单接枝预分散母料时,基体高分子链才能不断地渗透扩散进入预分散母料内,而预分散母料可被不断地溶胀和撕裂,因而其中的堆积SiO2才可不断地向基体相迁移和扩散,并最终在整个复合材料内实现初级粒子形式的高度均匀稳定分散.     

The properties of silica nanoparticles with high monodispersity synthesized in the microreactor system

A new combined micromixer/microreactor/batch reactor system for the synthesis of monodisperse silica particles was demonstrated, which showed superiorities over the batch reactor. The silica nanoparticles with different sizes (ranging from 20 nm to 2 μm) and size distributions could be controllably synthesized by varying the reaction temperature and reaction time. The narrowest size distribution of the silica particles was synthesized at 60 °C. The transmission electron microscopy characterization showed that the sphericities of silica particles got better as the particle size increased. Thermal gravimetry–differential thermal analysis and Fourier transform infrared characterization indicated that the amount of ethoxy groups of silica particles decreased and the hydroxyl groups increased with the reaction time increasing. And the hydroxyl groups in silica particles increased with the reaction temperature rising.     

Synthesis of spherical silica particles by sol‐gel method and application

Spherical silica particles were synthesized using the sol‐gel method by hydrolyzing tetraethyl orthosilicate (TEOS) with an alkali catalyst, and it was investigated how the experimental conditions (the reaction temperature, the concentration and dropping rate of the hydrolysis catalyst solution) affected the size and morphology of silica particles. Furthermore, the silica particles were doped with sodium fluoride to measure their ion release ability. The mean diameters of the silica particles changed according to the reaction temperature and the dropping rate of the hydrolysis catalyst, namely the higher the reaction temperature or the slower the dropping rate the smaller are the mean diameters. The surface area of the silica particles was significantly different depending on the dropping rate of the hydrolysis catalyst, namely the slower the dropping rate the larger the specific surface area. The specific heat capacity and thermal reduction (TG) of the silica particles were significantly different according to the reaction temperature, namely the higher the reaction temperature the lower the specific heat capacity and the TG. It was found that the fluoride‐retaining ability was proportional to the surface area of silica particles. The fluoride ion release was equilibrated on elapsing 5 min. Copyright © 2008 John Wiley & Sons, Ltd.     

Pickering乳液模板法制备Janus粒子

本文以SiO₂粒子稳定的水包油(O/W)型Pickering乳液作为模板, 在乳液连续相进行SI-ATRP, 将聚合物刷接枝到SiO₂粒子外半表面, 破乳得到半修饰的Janus粒子.     

纳米二氧化硅的表面改性研究

以γ-缩水甘油醚丙基三甲氧基硅烷(GPTMS)对酸催化水解正硅酸乙酯(TEOS)聚合得到的纳米二氧化硅胶粒表面进行接枝改性,用激光粒径仪测定二氧化硅颗粒的粒径,并用透射电子显微镜(TEM)观察了改性前后二氧化硅胶粒的分散状况,采用傅立叶红外(FTIR)光谱法对改性前后的二氧化硅粉体进行了分析,通过热失重分析(TGA)法对GPTMS接枝改性二氧化硅胶粒表面的接枝度进行分析计算,同时对颗粒溶胶的ζ电位进行了测试,结果表明:改性后二氧化硅胶粒分散性大大提高,硅烷偶联剂浓度对接枝度有显著影响,当GPTMS的浓度为1mL/S iO2(g)时,接枝度达到最大,且颗粒表面的物理化学性能发生显著变化。     

Development of an affinity silica monolith containing alpha1-acid glycoprotein for chiral separations

An affinity monolith based on silica and containing immobilized alpha(1)-acid glycoprotein (AGP) was developed and evaluated in terms of its binding, efficiency and selectivity in chiral separations. The results were compared with data obtained for the same protein when used as a chiral stationary phase with HPLC-grade silica particles or monoliths based on a copolymer of glycidyl methacrylate (GMA) and ethylene dimethacrylate (EDMA). The surface coverage of AGP in the silica monolith was 18% higher than that obtained with silica particles and 61% higher than that measured for a GMA/EDMA monolith. The higher surface area of the silica monolith gave materials that contained 1.5- to 3.6-times more immobilized protein per unit volume when compared to silica particles or a GMA/EDMA monolith. The retention, efficiency and resolving power of the AGP silica monolith were evaluated by injecting two chiral analytes onto this column (i.e., R/S-warfarin and R/S-propranolol). In each case, the AGP silica monolith gave higher retention plus better resolution and efficiency than AGP columns containing silica particles or a GMA/EDMA monolith. The AGP silica monolith also gave lower back pressures and separation impedances than these other materials. It was concluded that silica monoliths can be valuable alternatives to silica particles or GMA/EDMA monoliths when used with AGP as a chiral stationary phase.