氮掺杂还原氧化石墨烯负载铂催化剂的制备及甲醇电氧化性能

采用高温热解聚苯胺修饰的氧化石墨烯（PANI-GO）,得到了氮掺杂的还原氧化石墨烯碳材料（N-RGO）,以其负载Pt 制备了Pt/N-RGO纳米结构电催化剂. 采用透射电镜（TEM）、X射线光电子能谱（XPS）、X 射线衍射（XRD）谱及拉曼光谱等技术对N-RGO和Pt/N-RGO的形貌及结构进行了表征,用循环伏安、计时电流等电化学技术研究了Pt/N-RGO电极催化剂对CO溶出反应和甲醇电氧化反应的催化性能. 结果表明：高温热解PANIGO可同时实现GO的还原及其氮掺杂的过程,氮掺杂引起还原氧化石墨烯碳材料表面缺陷结构和导电性的增加;与相应的未掺杂氮样品Pt/RGO相比较,Pt/N-RGO样品上Pt 颗粒的分散更均匀,显示出更强的抗CO毒化能力和更高的甲醇电氧化催化活性及稳定性.     

氮掺杂还原氧化石墨烯负载铂催化剂的制备及甲醇电氧化性能

采用高温热解聚苯胺修饰的氧化石墨烯(PANI-GO),得到了氮掺杂的还原氧化石墨烯碳材料(N-RGO),以其负载Pt制备了Pt/N-RGO纳米结构电催化剂.采用透射电镜(TEM)、X射线光电子能谱(XPS)、X射线衍射(XRD)谱及拉曼光谱等技术对N-RGO和Pt/N-RGO的形貌及结构进行了表征,用循环伏安、计时电流等电化学技术研究了Pt/N-RGO电极催化剂对CO溶出反应和甲醇电氧化反应的催化性能.结果表明:高温热解PANIGO可同时实现GO的还原及其氮掺杂的过程,氮掺杂引起还原氧化石墨烯碳材料表面缺陷结构和导电性的增加;与相应的未掺杂氮样品Pt/RGO相比较,Pt/N-RGO样品上Pt颗粒的分散更均匀,显示出更强的抗CO毒化能力和更高的甲醇电氧化催化活性及稳定性.     

The Preparation of Compressible and Fire‐Resistant Sponge‐Supported Reduced Graphene Oxide Aerogel for Electromagnetic Interference Shielding

We here report a facile method to fabricate a sponge‐supported reduced graphene oxide aerogel (S‐RGOA) using a commercial melamine sponge and graphene oxide (GO). Firstly, GO sheets were self‐assembled within the melamine sponge by the assistance of a chemical cross‐linking agent; and then, freeze‐drying and thermal treatment were adopted to prepare S‐RGOA, in which continuous porous reduced graphene oxide (RGO) network formed between the skeleton. The resulting S‐RGOA exhibited a high electromagnetic interference shielding effectiveness (EMI SE) of 20.4‐27.3 dB in 8–12 GHz and the specific EMI SE could reach 1437 dB?cm³g^?1. The mechanical test suggests that the lightweight S‐RGOA is compressible and possesses low energy dissipation. Burning and TGA measurements indicate that S‐RGOA is fire‐resistant and has excellent thermal stability. Our work provides an economical and environmentally‐friendly method to fabricate RGO aerogels for using as electromagnetic interference materials.     

氮掺杂石墨烯的p型场效应及其精细调控

Functionalized graphene has attracted significant interest over the past decade due to its unique physical properties and potential applications. Graphene oxide (GO), a readily scaled-up product, is a basic material for further functionalization. Using reductive processes, highly conductive reduced graphene oxide (RGO) can be obtained, which exhibits electrical and optical properties analogous to those of graphene. Moreover, due to the presence of oxygen-containing functional groups, its chemical reactivity and electronic properties can be easily tailored by chemical doping with nitrogen. However, developing strategies for doping graphene is challenging and the fundamental roles of the doping atom configuration and its environment on the resulting properties of graphene remain poorly understood. These properties are important for electrical and catalytic applications of graphene. Thus, synthesizing specific configurations of nitrogen-doped graphene and consequently investigating the electrical and catalytic properties of the product is imperative. Herein, we demonstrate an approach that allows for successful production of nitrogen-functionalized RGO using Schiff base condensation between the amino groups in an o-aryl diamine compound and the carbonyl groups in GO. Three typical nitrogen-containing species including o-phenylenediamine (OPD), 2, 3-diaminopyridine (23DAP), and bis(trifluoromethyl)-1, 2-diaminobenzene (BTFMDAB) were used for functionalizing the GO samples, and the corresponding RGO derivatives (OPD-RGO, 23DAP-RGO, and BTF-RGO) were obtained by thermal annealing. Pyrazine nitrogen was successfully introduced into graphitic framework, as confirmed by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectra, thermal gravimetric analysis (TGA), Raman, and X-ray photoelectron spectroscopy (XPS). Field-effect transistors (FETs) based on the BTF-RGO exhibited hole-dominated ambipolar field-effect behavior with a Dirac point at a 9 V gate voltage and hole mobilities up to 2.5 times that of RGO. The weak p-type doping effect originated from the strongly electron-withdrawing trifluoromethyl groups. By studying the OPD-RGO and 23DAP-RGO-based FETs, containing pyrazine nitrogen and mixed pyrazine/pyridine nitrogen, respectively, we found that pyrazine nitrogen provided weak n-type doping effects, while pyridine nitrogen exhibited weak p-type doping effects due to its electron-withdrawing ability. Enhanced p-type doping effect was accompanied by the introduction of groups with stronger electron-withdrawing ability into the graphitic framework. Impressively, pyridine nitrogen in the pyrazine nitrogen-doped RGO yielded a weak p-type doped graphene due to the electron-withdrawing effect of the pyridine nitrogen. Nitrogen-doped graphene can be finely tuned from weak n-type to weak p-type doping by adjusting the electron-withdrawing ability of o-aryl diamine compounds. This study demonstrates the effect of nitrogen configuration and its surrounding environment on the electrical properties of RGOs, providing additional possible applications.     

Poly(9,9′‐diheylfluorene carbazole) Functionalized with Reduced Graphene Oxide: Convenient Synthesis using Nitrogen‐Based Nucleophiles and Potential Applications in Optical Limiting

Covalently functionalized reduced graphene oxide (RGO) sheet was prepared by treating nitrogen‐centered anions generated from poly(9,9′‐diheylfluorene carbazole) (PCF) with GO. The resultant hybrids with different chemical behavior were separated by centrifugation. The covalent modification was fully characterized by IR spectroscopy, UV/Vis spectroscopy, thermogravimetric analysis (TGA), Raman spectroscopy, TEM, and SEM. It was found that RGO‐PCF‐s, the soluble part, was split into small platelets with a size of about 200 nm, and the hydrophobic polymer PCF became hydrophilic after wrapping by RGO. The content of RGO in RGO‐PCF‐s was about 11.9 %, and the hybrid material showed good dispersion stability in water. Besides, RGO‐PCF‐i, the insoluble part, with larger size, displayed excellent optical‐limiting response, in which both nonlinear absorption and nonlinear scattering play important roles. As nitrogen‐centered anions are an important type of intermediates in chemistry, this one‐step “grafting‐to” strategy could be used to obtain RGO‐based materials with different applications.     

Hemin‐Functionalized Reduced Graphene Oxide Nanosheets Reveal Peroxynitrite Reduction and Isomerization Activity

Facile and efficient reduction of graphene oxide (GO) and novel applications of the reduced graphene oxide (RGO) based materials are of current interest. Herein, we report a novel and facile method for the reduction of GO by using a biocompatible reducing agent dithiothreitol (DTT). Stabilization of DTT by the formation of a six‐membered ring with internal disulfide linkage upon oxidation is responsible for the reduction of GO. The reduced graphene oxide is characterized by several spectroscopic and microscopic techniques. Dispersion of RGO in DMF remained stable for several weeks suggesting that the RGO obtained by DTT‐mediated reduction is hydrophobic in nature. This method can be considered for large scale production of good quality RGO. Treatment of RGO with hemin afforded a functional hemin‐reduced graphene oxide (H‐RGO) hybrid material that exhibited remarkable protective effects against the potentially harmful peroxynitrite (PN). A detailed inhibition study on PN‐mediated oxidation and nitration reactions indicate that the interaction between hemin and RGO results in a synergistic effect, which leads to an efficient reduction of PN to nitrate. The RGO also catalyzes the isomerization of PN to nitrate as the RGO layers facilitate the rapid recombination of ^.NO₂ with Fe^IV=O species. In the presence of reducing agents such as ascorbic acid, the Fe^IV=O species can be reduced to Fe^III, thus helping to maintain the PN reductase cycle.     

Hyperbranched polytriazine grafted reduced graphene oxide and its application

In this article, cyanuric chloride (CC) and hexamethylenediamine (HMD) as raw material, the grafting of hyperbranched polytriazine onto reduced graphene oxide surface (HBP‐RGO) was achieved by the repeated nucleophilic substitution between chlorine groups of CC and amino groups of HMD, respectively. The Fourier transform infrared, X‐ray photoelectron spectroscopic, Raman, transmission electron microscopic, thermogravimetric, and atomic force microscopic analysis showed that HBP‐RGO had been successfully prepared and the HBP had a dendritic structure on the surface of RGO. And then, the HBP‐RGO was added into polystyrene (PS) and the HBP‐RGO/PS composite was prepared by solution mixing. The micro‐morphology, thermal stability, and electrical conductivity of RGO/PS and HBP‐RGO/PS composites were characterized and compared. The scanning electron microscopic analysis showed that the HBP‐RGO can uniformly disperse in PS. Meanwhile, the HBP‐RGO/PS composite showed good thermal stability and electrical conductivity, the percolation threshold of the composites is low as 0.32 vol %. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2132–2140     

石墨烯衍生物负载的纳米催化剂用于氧还原反应

综述了用于燃料电池中氧还原反应(ORR)的石墨烯衍生物负载的各种纳米催化剂的最新进展。介绍了用于表征石墨烯基电催化剂的常规电化学技术以及石墨烯基电催化剂最新的研究进展。负载于还原氧化石墨烯(RGO)上的Pt催化剂的电化学活性和稳定性均得到显著提高。其它贵金属催化剂,如Pd, Au和Ag也表现出较高的催化活性。当以RGO或少层石墨烯为载体时, Pd催化剂的稳定性提高。讨论了氧化石墨烯负载Au或Ag催化剂的合成方法。另外,以N4螯合络合物形式存在的非贵过渡金属可降低氧的电化学性能。 Fe和Co是可替代的廉价ORR催化剂。在大多数情况下,这些催化剂稳定性和耐受性的问题均可得到解决,但其整体性能还很难超越Pt/C催化剂。     

Thermal kinetics and thermo‐mechanical properties of graphene integrated fluoroelastomer

In this work, the thermal properties of a fluoroelastomer enhanced by graphene were systematically investigated. Although graphene oxide (GO) is the most popular and cheapest source for graphene, its chemical and thermal properties were quite different from reduced graphene oxide (RGO). By comparing their influences on the thermal properties of elastomer, the effects from chemical structures and morphologies of graphene were analyzed. As the vulcanization and decomposition determine the properties of the elastomer proved by significantly different thermo‐mechanical properties of the fluoroelastomer reinforced by GO and RGO presented, this work provides a method to ultimate utilize graphene to reinforce elastomer. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1691–1700     

A novel graphene hybrid for reducing fire hazard of epoxy resin

Epoxy resin (EP) is more and more important in many fields, but its application is limited due to the inflammability in air of EP. Therefore, reducing the fire hazard of EP is necessary. In this work, a kind of hybrid flame retardant (α‐ZrP‐RGO) consisting of a 2‐dimensional inorganic reduced graphene oxide (RGO) modified with a planar‐like α‐zirconium phosphate (α‐ZrP) particles was prepared successfully via 1‐step hydrothermal method. The effects of α‐ZrP‐RGO on the thermal performance, flame retardancy, and smoke suppression of EP were investigated by preparing EP composites containing both EP and α‐ZrP‐RGO. Thermogravimetric results revealed that α‐ZrP‐RGO could improve the char yield of EP at 700°C obviously. In addition, compared with pure EP, the peak heat release rate and the total heat release of EP composites were decreased significantly, while the limited oxygen index of EP composites was increased. Meanwhile, the smoke production rate of EP composites was reduced obviously with the addition of α‐ZrP‐RGO. The enhanced flame retardancy and smoke suppression of EP composites were mainly attributed to not only the physical barrier effect of both α‐ZrP and RGO but also the catalytic effect of α‐ZrP during the combustion process of EP composites.     

Preparation of porous polyimide/in‐situ reduced graphene oxide composite films for electromagnetic interference shielding

Herein we report an easy and efficient approach to prepare lightweight porous polyimide (PI)/reduced graphene oxide (RGO) composite films. First, porous poly (amic acid) (PAA)/graphene oxide (GO) composite films were prepared via non‐solvent induced phase separation (NIPS) process. Afterwards PAA was converted into PI through thermal imidization and simultaneously GO dispersed in PAA matrix was in situ thermally reduced to RGO. The GO undergoing the same thermal treatment process as thermal imidization was characterized with thermogravimetric analysis, Raman spectra, X‐ray photoelectron spectroscopy and X‐ray diffraction to demonstrate that GO was in situ reduced during thermal imidization process. The resultant porous PI/RGO composite film (500‐µm thickness), which was prepared from pristine PAA/GO composite with 8 wt% GO, exhibited effective electrical conductivity of 0.015 S m^?1 and excellent specific shielding efficiency value of 693 dB cm² g^?1. In addition, the thermal stability of the porous PI/RGO composite films was also dramatically enhanced. Compared with that of porous PI film, the 5% weight loss temperature of the composite film mentioned above was improved from 525°C to 538°C. Moreover, tensile test showed that the composite film mentioned above possessed a tensile strength of 6.97 MPa and Young's modulus of 545 MPa, respectively. Copyright © 2016 John Wiley & Sons, Ltd.     

Surface and Interface Engineering of Graphene Oxide Films by Controllable Photoreduction

We report herein the engineering of the surface/interface properties of graphene oxide (GO) films by controllable photoreduction treatment. In our recent works, typical photoreduction processes, including femtosecond laser direct writing (FsLDW), laser holographic lithography, and controllable UV irradiation, have been employed to make conductive reduced graphene oxide (RGO) microcircuits, hierarchical RGO micro‐nanostructures with both superhydrophobicity and structural color, as well as moisture‐responsive GO/RGO bilayer structures. Compared with other reduction protocols, for instance, chemical reduction and thermal annealing, the photoreduction strategy shows distinct advantages, such as mask‐free patterning, chemical‐free modification, controllable reduction degree, and environmentally friendly processing. These works indicate that the surface and interface engineering of GO through controllable photoreduction of GO holds great promise for the development of various graphene‐based microdevices.     

Concurrent Phosphorus Doping and Reduction of Graphene Oxide

Doped graphene materials are of huge importance because doping with electron‐donating or electron‐withdrawing groups can significantly change the electronic structure and impact the electronic and electrochemical properties of these materials. It is highly important to be able to produce these materials in large quantities for practical applications. The only method capable of large‐scale production is the oxidative treatment of graphite to graphene oxide, followed by its consequent reduction. We describe a scalable method for a one‐step doping of graphene with phosphorus, with a simultaneous reduction of graphene oxide. Such a method is able to introduce significant amount of dopant (3.65 at. %). Phosphorus‐doped graphene is characterized in detail and shows important electronic and electrochemical properties. The electrical conductivity of phosphorus‐doped graphene is much higher than that of undoped graphene, owing to a large concentration of free carriers. Such a graphene material is expected to find useful applications in electronic, energy storage, and sensing devices.     

Rules of Boron–Nitrogen Doping in Defect Graphene Sheets: A First‐Principles Investigation of Band‐Gap Tuning and Oxygen Reduction Reaction Catalysis Capabilities

Introduction of defects and nitrogen doping are two of the most pursued methods to tailor the properties of graphene for better suitability to applications such as catalysis and energy conversion. Doping nitrogen atoms at defect sites of graphene and codoping them along with boron atoms can further increase the efficiency of such systems due to better stability of nitrogen at defect sites and stabilization provided by B?N bonding. Systematic exploration of the possible doping/codoping configurations reflecting defect regions of graphene presents a prevalent doping site for nitrogen‐rich BN clusters and they are also highly suitable for modulating (0.2–0.9 eV) the band gap of defect graphene. Such codoped systems perform significantly better than the platinum surface, undoped defect graphene, and the single nitrogen or boron atom doped defect graphene system for dioxygen adsorption. Significant stretching of the O?O bond indicates a lowering of the bond breakage barrier, which is advantageous for applications in the oxygen reduction reaction.     

Defect‐Rich Graphene Nanomesh Produced by Thermal Exfoliation of Metal–Organic Frameworks for the Oxygen Reduction Reaction

Although graphene nanomesh is an attractive 2D carbon material, general synthetic routes to produce functional graphene nanomesh in large‐scale are complex and tedious. Herein, we elaborately design a simple two‐step dimensional reduction strategy for exploring nitrogen‐doped graphene nanomesh by thermal exfoliation of crystal‐ and shape‐modified metal‐organic frameworks (MOFs). MOF nanoleaves with 2D rather than 3D crystal structure are used as the precursor, which are further thermally unraveled into nitrogen‐doped graphene nanomesh by using metal chlorides as the exfoliators and etching agent. The nitrogen‐doped graphene nanomesh has a unique ultrathin two‐dimensional morphology, high porosity, rich and accessible nitrogen‐doped active sites, and defective graphene edges, contributing to an unprecedented catalytic activity for the oxygen reduction reaction (ORR) in acid electrolytes. This approach is suitable for scalable production.     

Porous Molybdenum‐Based Hybrid Catalysts for Highly Efficient Hydrogen Evolution

We have synthesized a porous Mo‐based composite obtained from a polyoxometalate‐based metal–organic framework and graphene oxide (POMOFs/GO) using a simple one‐pot method. The MoO₂@PC‐RGO hybrid material derived from the POMOFs/GO composite is prepared at a relatively low carbonization temperature, which presents a superior activity for the hydrogen‐evolution reaction (HER) in acidic media owing to the synergistic effects among highly dispersive MoO₂ particles, phosphorus‐doped porous carbon, and RGO substrates. MoO₂@PC‐RGO exhibits a very positive onset potential close to that of 20 % Pt/C, low Tafel slope of 41 mV dec^?1, high exchange current density of 4.8×10^?4 A cm^?2, and remarkable long‐term cycle stability. It is one of the best high‐performance catalysts among the reported nonprecious metal catalysts for HER to date.     

Nitrogen,Phosphorus, and Fluorine Tri‐doped Graphene as a Multifunctional Catalyst for Self‐Powered Electrochemical Water Splitting

Electrocatalysts are required for clean energy technologies (for example, water‐splitting and metal‐air batteries). The development of a multifunctional electrocatalyst composed of nitrogen, phosphorus, and fluorine tri‐doped graphene is reported, which was obtained by thermal activation of a mixture of polyaniline‐coated graphene oxide and ammonium hexafluorophosphate (AHF). It was found that thermal decomposition of AHF provides nitrogen, phosphorus, and fluorine sources for tri‐doping with N, P, and F, and simultaneously facilitates template‐free formation of porous structures as a result of thermal gas evolution. The resultant N, P, and F tri‐doped graphene exhibited excellent electrocatalytic activities for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The trifunctional metal‐free catalyst was further used as an OER–HER bifunctional catalyst for oxygen and hydrogen gas production in an electrochemical water‐splitting unit, which was powered by an integrated Zn–air battery based on an air electrode made from the same electrocatalyst for ORR. The integrated unit, fabricated from the newly developed N, P, and F tri‐doped graphene multifunctional metal‐free catalyst, can operate in ambient air with a high gas production rate of 0.496 and 0.254 μL s⁻¹ for hydrogen and oxygen gas, respectively, showing great potential for practical applications.     

Nitrogen,Phosphorus, and Fluorine Tri‐doped Graphene as a Multifunctional Catalyst for Self‐Powered Electrochemical Water Splitting

Electrocatalysts are required for clean energy technologies (for example, water‐splitting and metal‐air batteries). The development of a multifunctional electrocatalyst composed of nitrogen, phosphorus, and fluorine tri‐doped graphene is reported, which was obtained by thermal activation of a mixture of polyaniline‐coated graphene oxide and ammonium hexafluorophosphate (AHF). It was found that thermal decomposition of AHF provides nitrogen, phosphorus, and fluorine sources for tri‐doping with N, P, and F, and simultaneously facilitates template‐free formation of porous structures as a result of thermal gas evolution. The resultant N, P, and F tri‐doped graphene exhibited excellent electrocatalytic activities for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The trifunctional metal‐free catalyst was further used as an OER–HER bifunctional catalyst for oxygen and hydrogen gas production in an electrochemical water‐splitting unit, which was powered by an integrated Zn–air battery based on an air electrode made from the same electrocatalyst for ORR. The integrated unit, fabricated from the newly developed N, P, and F tri‐doped graphene multifunctional metal‐free catalyst, can operate in ambient air with a high gas production rate of 0.496 and 0.254 μL s^?1 for hydrogen and oxygen gas, respectively, showing great potential for practical applications.     

Poly(N‐vinylpyrrolidone)‐Decorated Reduced Graphene Oxide with ZnO Grown In Situ as a Cathode Buffer Layer for Polymer Solar Cells

A ZnO@reduced graphene oxide–poly(N‐vinylpyrrolidone) (ZnO@RGO‐PVP) nanocomposite, prepared by in situ growth of ZnO nanoparticles on PVP‐decorated RGO (RGO‐PVP) was developed as a cathode buffer layer for improving the performance of polymer solar cells (PSCs). PVP not only favors homogeneous distribution of the RGO through the strong π–π interactions between graphene and PVP molecules, but also acts as a stabilizer and bridge to control the in situ growth of sol–gel‐derived ZnO nanoparticles on the surface of the graphene. At the same time, RGO provides a conductive connection for independent dispersion of ZnO nanoparticles to form uniform nanoclusters with fewer domain boundaries and surface traps. Moreover, the LUMO level of ZnO is effectively improved by modification with RGO‐PVP. Compared to bare ZnO, a ZnO@RGO‐PVP cathode buffer layer substantially reduces the recombination of carriers, increases the electrical conductivity, and enhances electron extraction. Consequently, the power conversion efficiency of an inverted device based on thieno[3,4‐b]thiophene/benzodithiophene (PTB7):[6,6]‐phenyl C₇₁‐butyric acid methyl ester (PC₇₁BM) with ZnO@RGO‐PVP as cathode buffer layer was greatly improved to 7.5 % with improved long‐term stability. The results reveal that ZnO@RGO‐PVP is universally applicable as a cathode buffer layer for improving the performance of PSCs.