Double-networks based on interconnected amphiphilic “in–out” star first polymer conetworks prepared by RAFT polymerization

Double-network hydrogels were prepared using well-defined first networks comprising interconnected amphiphilic “in-out” star copolymers synthesized via sequential reversible addition-fragmentation chain transfer (RAFT) polymerization, and second networks based on a photopolymerized mixture of acrylamide and N,N′-methlyenebisacrylamide. All first and double-network hydrogels were characterized in terms of their aqueous degrees of swelling and mechanical properties in compression. The most hydrophobic first and double-network hydrogels exhibited the best mechanical properties, which may be attributed to their low aqueous swelling degrees and good mesoscale organization in water as revealed using small-angle neutron scattering (SANS) which showed that the size of the formed hydrophobic domains could be controlled by the polymer conetwork structure. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2161–2174     

Nanocomposite smart hydrogels with improved responsiveness and mechanical properties: A mini review

Responsive hydrogels have the ability to change their volume, transparency, or other properties in response to external chemical and/or physical stimuli. The responsiveness properties including responsive rate and degree, as well as mechanical properties such as Young's modulus, toughness, breaking strength, and breaking strain are crucial parameters of the smart hydrogels that determine the scope of hydrogel applications such as soft actuators, artificial muscles, and tissue engineering scaffolds. In this paper, the development of the nanocomposite smart hydrogels, which can achieve both improved responsiveness and mechanical properties, is reviewed. First, the fabrication approaches for building the nanocomposite networks by doping organic or inorganic nanomaterials via crosslinking or blending strategies are introduced. Then, the mechanisms used to improve both responsiveness and mechanical properties of nanocomposite responsive hydrogels are discussed. Finally, the perspectives as well as current challenges of such nanocomposite responsive hydrogels are addressed. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1306–1313     

Hydrogen bond-reinforced double-network hydrogels with ultrahigh elastic modulus and shape memory property

Development of tough hydrogels has greatly expanded their applications as load-bearing materials. However, the elastic modulus of tough hydrogels is usually lower than 1 MPa. It remains a challenge to design tough hydrogels with high modulus. We report here a series of tough double-network (DN) hydrogels with ultrahigh elastic modulus (up to 200 MPa) by forming robust hydrogen bonds between the first poly(acrylic acid) network and the second poly(N-isopropyl acrylamide) network. The dense cooperative hydrogen bonds greatly reduce the segmental mobility and thus improve the rigidity of gel matrix. Owing to the dynamic nature of hydrogen bonds, the modulus of hydrogels is strongly influenced by temperature and pH, affording the gels shape memory property. The strategy by forming robust noncovalent bonds between interpenetrating networks should be applicable to other systems for designing tough and versatile hydrogels with diverse promising applications. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1281–1286     

In situ photocrosslinkable hyaluronic acid‐based surgical glue with tunable mechanical properties and high adhesive strength

Hyaluronic acid (HA), a naturally occurring linear polysaccharide, has been widely used as a key biomaterial in a range of cosmetic and therapeutic applications. Its excellent biocompatibility and bio‐functions related to tissue regeneration encourage the development of HA‐based hydrogels to expand its applications. This study details an in situ forming surgical glue based on photocrosslinkable HA, providing tunable mechanical properties and firm tissue adhesion under wet and dynamic conditions. Depending on the degree of photocrosslinkable methacrylate groups in HA polymer chains, the mechanical properties of hyaluronate methacrylate (HAMA) hydrogels prepared by UV photocrosslinking was improved. Ex vivo adhesion tests revealed that HAMA hydrogels exhibited 3‐fold higher shear adhesive strength compared to gelatin methacryloyl hydrogels and achieved firm adherence to the porcine skin tissue for several weeks. The high adhesive strength of HAMA hydrogels, under dry and wet conditions, suggests that it may have great promise as a tissue adhesive. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 522–530     

Shape changing hydrogels and their applications as soft actuators

In nature, plants or animals change their geometric shapes and hence realize different functions or movements. Inspired by the shape changes of plants and animals, several hydrogels that can change their geometric shapes upon external stimuli have been developed. This article provides a brief overview of shape changing hydrogels. First, two strategies to realize the shape changes of hydrogels, that is, preparing hydrogels with inhomogeneous structures and applying inhomogeneous stimuli onto homogeneous hydrogels, are discussed. Then, external stimuli that can actuate the shape changes of the stimuli-responsive hydrogels are presented. The applications of shape changing hydrogels such as soft machines, soft robotics, drug carriers, microfluidic valves, and sensors have been provided in third part. Finally, we offer our perspective on open challenges and future areas of interest for the shape changing hydrogel actuators. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1314–1324     

Tough and self‐recoverable hydrogels crosslinked by triblock copolymer micelles and Fe3+ coordination

Tough hydrogels have great potentials in soft robotics, artificial muscles, tissue replacement, and so on. Here we introduce novel tough hydrogels crosslinked by triblock copolymer (F127DA) micelles and metal coordination. The gels showed outstanding tensile strength (∼1–11 MPa), toughness (∼4–32 MJ m⁻³), and excellent self‐recovery properties (∼56.8–87.2% toughness recovery in 9 min at room temperature). The mechanical and self‐recovery properties could be manipulated by varying contents of micelles and/or COO⁻ groups. Dynamic mechanical analysis of the hydrogels revealed apparent activation energy and relaxations for both physical interactions. In situ small‐angle X‐ray scattering measurements on hydrogels upon stretching revealed micelle deformations. XPS measurements on hydrogels before and after stretching revealed significant changes in the binding energy of Fe³⁺ ions in the gels, suggesting the rupture of coordination bonds. The experimental results strongly suggest a synergistic effect from the micelle‐crosslinking and Fe³⁺–COO⁻ coordination on the strength, toughness, and self‐recovery of the hydrogels. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 865–876     

Interpenetrating thermophobic and thermophilic dual responsive networks

Poly(N‐acryloyl glycinamide) (PNAGA)/poly(N‐isopropyl acrylamide) (PNIPAAm) interpenetrating network (IPN) hydrogels were made by UV‐light initiated radical polymerization in two‐steps. The IPN hydrogels showed a double thermoresponsive behavior due to the combination of PNIPAAm (thermophobic) and PNAGA (thermophilic) networks. Increasing the content of the thermophobic PNIPAAm network leads to a change from a broad thermophilic volume phase transition temperature of PNAGA to a thermophilic–thermophobic‐type dual transition for the prepared IPN. Due to the double thermoresponsive character of the IPN gels, the mechanical properties are dependent upon temperature as demonstrated by performing tensile tests in water at 15 and 50 °C. Furthermore, the IPN hydrogels were characterized using turbidity measurements, SEM, and the determination of the equilibrium swelling ratio. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 539–544     

Mechanically tough and recoverable hydrogels via dual physical crosslinkings

Development of functional tough hydrogels with new network structures and energy dissipation mechanisms has great promise for many applications. Here, a new type of physical hydrogel crosslinked by hydrophobic association and hydrogen bonds was synthesized by a facile micellar copolymerization of hydrophobic methyl acrylate (MA) monomers and hydrophilic N-hydroxyethyl acrylamide (HEAA) monomers in the presence of Tween80 micelles. Strong hydrophobic association between inner MA and Tween80 and hydrogen bonds between external polyHEAA and Tween80 provide two distinct crosslinkers to construct mechanically tough and recoverable network. Mechanical properties of polyHEAA-MA@Tween80 hydrogels strongly depended on network components (HEAA, MA; Tween80 concentrations). At optimal conditions, the hydrogels can achieve fracture stress of 700 kPa, fracture strain of 1687 mm/mm, elastic modulus of 195 kPa, and tearing energy of 1598 J/m². Due to the reversible nature of physical interactions, polyHEAA-MA@Tween80 hydrogels can achieve fast stiffness/toughness recovery of 60%/33% without any external stimuli and resting time at room temperature. This work demonstrates a new design strategy to fabricate a new a single-network hydrogel with high mechanical and self-recovery properties by incorporating both hydrophobic association and hydrogen bonds in the network, which may provide alternative viewpoint for the design of multifunctional tough hydrogels. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1294–1305     

A Sequential Debonding Fracture Model for Hydrogen-Bonded Hydrogels

Hydrogen bonds are known to play an important role in prescribing the mechanical performance of certain hydrogels such as polyether-based polyurethanes. The quantitative contribution of hydrogen bonds to the toughness of polymer networks, however, has not been elucidated to date. Here, a new physical model is developed to predict the threshold fracture energies of hydrogels physically crosslinked via hydrogen bonds. The model is based on consecutive and sequential dissociation of hydrogen-bonded crosslinks during crack propagation. It is proposed that the scission of hydrogen bonds during crack propagation allows polymer strands in the deformation zone to partially relax and release stored elastic energy. The summation of these partial chain relaxations leads to amplified threshold fracture energies which are 10–45 times larger than those predicted by the classical Lake–Thomas theory. Experiments were performed on a hydrophilic polyurethane hydrogel where urea additions were used to control the density of hydrogen bonds. The measured fracture energies were in good agreement with the calculated values. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1287–1293     

Triple redox/temperature responsive diselenide‐containing homopolypeptide micelles and supramolecular hydrogels thereof

Stimuli‐responsive polypeptides are receiving much attention for drug delivery systems and tissue engineering scaffolds; however, it is challenging to construct multiple‐responsive polypeptides and one‐component polymeric hydrogels. Herein, a novel type of triple redox/temperature‐responsive diselenide‐containing poly(methoxydiethylene glycol‐l ‐glutamate) homopolypeptide was facilely synthesized by selenocystamine‐initiated ring‐opening polymerization in DMF at 30 °C, and their chemical structures and physical properties were fully characterized by means of ¹H NMR, GPC, FT‐IR, WAXD, and CD. They self‐assembled into spherical micelles in aqueous solution, which possess a lower critical solution temperature, redox‐responsiveness inherited from diselenide bond, and the triple stimuli‐sensitive self‐assembly behaviors, as characterized by means of turbidity, DLS, TEM, and zeta potential measurements. The diselenide‐containing homopolypeptides formed supramolecular hydrogels at room temperature, exhibiting a thermal gel–sol transition. The rheological tests evidence that the mechanical modulus of the hydrogel is independent of angular frequency within 100 rad/s and at 25 °C, in which the storage modulus of G′ is order of magnitude greater than the loss modulus of G″, displaying a solid‐like elastic behavior. Moreover, the mechanical modulus of the hydrogel can be tuned by changing the chain length of the homopolypeptide, the 10‐mM 1,4‐dithiothreitol (DTT) reduction, and 1 mM H₂O₂ oxidation, respectively. Consequently, this work provides a simple strategy to fabricate triple‐stimuli responsive polypeptide micelles and one‐component hydrogels. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1067–1077     

Crosslinked anion exchange membranes with connected cations

The selective transport of ions has crucial importance in biological systems as well as modern‐day energy devices, such as batteries and fuel cells, and water purification membranes. Control over ion movement can be exerted by ligation, ion channel dimensions, solvation, and electrostatic interactions. Polyelectrolyte hydrogels can provide aligned pathways for counter ion transport but lack mechanical integrity, while polyelectrolyte membranes typically suffer from the absence of an ion transport channel network. To develop polymer membranes for improved ion transport, we present the design of a novel material that combines the advantages of aligned pathways found in polyelectrolyte hydrogel and mechanical robustness in conventional membranes. The ionic species were organized via controlled copolymerization of a quaternizable monomer. Additionally, dimensional stability was then incorporated through a cast/crosslinking method to lock in the network of connected cationic groups. This strategy resulted in dramatically enhanced ion transport, as characterized by ionic conductivities (>80 mS/cm for Cl^–, and ∼200 mS/cm for OH^–). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 618–625     

Strong and tough hydrogels crosslinked by multi-functional polymer colloids

Tough polymer hydrogels have great potential applications in soft actuators, artificial muscles, tissue engineering, and so forth. To improve the strength and toughness of hydrogels, numerous strategies have been developed to integrate efficient energy dissipation mechanisms into the hydrophilic networks. Among them, the use of macro-crosslinkers to replace conventional chemical ones has become promising to develop tough hydrogels. Polymer colloids—including nano-/microparticles, nano-/microgels, hydrophobic associates, and block copolymer assemblies—have been employed in literature as multi-functional macro-crosslinkers that link polymer chains through covalent bonds or noncovalent interactions. The dislocation, deformation, desociation, and rupture of polymer colloids upon loadings are the major mechanisms to dissipate energy. This article provides a comprehensive account of most recent progresses on tough hydrogels crosslinked by polymer colloids, and explores the toughening mechanisms. It aims to inspire novel designs of tough hydrogels with multi-functionalities. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1336–1350     

A soft lithography method to generate arrays of microstructures onto hydrogel surfaces

Materials bearing microscale patterns on the surface have important biomedical applications such as scaffolds in tissue engineering, drug delivery systems, sensors, and actuators. Hydrogels are an attractive class of materials that has excellent biocompatibility, biodegradability, and tunable mechanical properties that meet the requirements of the aforementioned applications. Generating patterns of intricate microstructures onto the hydrogel surfaces, however, is challenging due to properties such as the crosslinking density, low mechanical strength, adhesion, or chemical incompatibility of hydrogels with various molds. Here, we report the use of a soft lithography technique to successfully transfer arrays of micropillars onto a poly(2‐hydroxyethyl methacrylate)‐based hydrogel. The swelling of the hydrogel in solvents, such as phosphate‐buffered saline, deionized water, 60% ethanol, and absolute ethanol, facilitates the reproducible replication of the pattern. Furthermore, the micropillar pattern promotes the attachment of HeLa cells onto this hydrogel which is not inherently adhesive when unpatterned. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1144–1157     

Synthesis and characterization of acrylamide/acrylic acid hydrogels crosslinked using a novel diacrylate of glycerol to produce multistructured materials

In this work we propose a new crosslinking agent and the method to use it for the synthesis of acrylate based hydrogels. The use of this diacrylate of glycerol, synthesized in our laboratory, allows the generation of materials with well defined micro‐structures in the dry state, unique meso‐ and macro‐structures during swelling, and enhanced mechanical properties and swelling capacity in water. These properties depend on the crosslinking agent concentration, as well as synthesis thermal history. Poly(acrylamide‐co‐acrylic acid) hydrogels are commonly crosslinked with N, N′‐methylenebisacrylamide or N‐isopropylacrylamide. Here we obtain and use a new crosslinking agent, obtained from the reaction between glycerol and acrylic acid to produce a Diacrylate of glycerol (DAG). Two synthesis methods at equivalent molar ratio of acrylamide/acrylic acid (AM/AA) were analyzed. The mechanical properties, the swelling capacity, and the morphology at microscale of these hydrogels showed a well defined transition at a critical concentration of crosslinking agent. DAG induces the generation of hydrogels with hierarchichal structure. The micro‐structure surface morphology was investigated by scanning electron microscopy, the meso‐structure by polarized light microscopy and the macro‐structure by CCD imaging. The hydrogels with hierarchical structures showed improved mechanical properties when compared with structureless hydrogels. Control of the microstructure allows the generation of materials for different applications, i.e. templates or smart materials that interact with electromagnetic radiation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2667–2679, 2008     

Injectable hydrogels

Hydrogels are promising for a variety of medical applications due to their high water content and mechanical similarity to natural tissues. When made injectable, hydrogels can reduce the invasiveness of application, which in turn reduces surgical and recovery costs. Key schemes used to make hydrogels injectable include in situ formation due to physical and/or chemical cross‐linking. Advances in polymer science have provided new injectable hydrogels for applications in drug delivery and tissue engineering. A number of these injectable hydrogel systems have reached the clinic and impact the health care of many patients. However, a significant remaining challenge is translating the ever‐growing family of injectable hydrogels developed in laboratories around the world to the clinic. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Double network hydrogels with controlled shape deformation: A mini review

Double network hydrogels (DN gels), consisting of two networks with strongly asymmetric network structures and properties, are one of most investigated high strength hydrogels. In most cases, the first network of DN gels is rigid, brittle and tightly crosslinked, while the second network is soft, ductile and loosely crosslinked. Because of the tunable and diverse network structures, DN gels with controlled shape deformation have attracted great attention in recent years. The shape deformation of DN gels can be controlled by first network, second network, or both networks. In this mini review, the shape deformation of DN gels via different networks will be summarized, and the application and future perspectives also are discussed. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1351–1362     

A facile method to fabricate tough hydrogel with ultra-wide adjustable stiffness,stress, and fast recoverability

In this article, we report a synergistic strategy to develop dual physically cross-linked tough hydrogels via one-pot bulk copolymerization of N-vinyl-2-pyrrolidone, acrylic acid, and stearyl methylacrylate (SMA) without any adscititious surfactant. Due to synergic effects of hydrogen bonding and hydrophobic association, the resulted dual physically cross-linked hydrogels (DP Gel) with ultra-wide range adjustable Young's modulus (0.08–45.6 MPa), tensile stress (0.7–6.9 MPa), and toughness (3.3–23.1 MJ m⁻³). Stretching to 300%, DP Gel exhibited fast recoverability that remained ~95% of initial dissipated energy after resting in 60 °C for 3 min. Finally, scanning electron microscopy revealed that the microstructure of hydrogel changed from phase separation structure to micro phase separation as SMA added, which accounted for excellent performance of DP Gel. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1469–1474     

Nanocomposite hydrogel consisting of Na‐montmorillonite with enhanced mechanical properties

A new kind of nanocomposite (NC) hydrogel with Na‐montmorillonite (MMT) is presented in this article. The NC hydrogels were synthesized by free radical copolymerization of acrylamide and (3‐acrylamidopropyl) trimethylammonium chloride (ATC) in the presence of MMT and N,N′‐methylene‐bis‐acrylamide used as chemical cross‐linker. Due to the cation‐exchange reaction between MMT and ATC (cationic monomer) during the synthesis of NC hydrogels, MMT platelets were considered chemical “plane” cross‐linkers, different from “point” cross‐linkers. With increasing amount of MMT, the crosslinking degree enhanced, causing a decrease of the swelling degree at equilibrium. Investigations of mechanical properties indicated that NC hydrogels exhibited enhanced strength and toughness, which resulted from chemical interaction between exfoliated MMT platelets and polymer chains in hydrogels. Dynamic shear measurements showed that both storage modulus and loss modulus increased with increasing MMT content. The idea described here provided a new route to prepare hydrogels with high mechanical properties by using alternative natural Na‐MMT. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1020–1026     

pH/temperature double responsive behaviors and mechanical strength of laponite‐crosslinked poly(DEA‐co‐DMAEMA) nanocomposite hydrogels

A nanocomposite (NC) hydrogel crosslinked by inorganic Laponite XLG was successfully synthesized via in situ free radical polymerization of monomers N,N‐diethylacrylamide and (2‐dimethylamino) ethyl methacrylate (DMAEMA). Polymerization was carried out at room temperature due to the accelerating effect of DMAEMA. The as‐prepared hydrogels displayed controlled transformation in optical transmittance and volume in response to small diversification of environmental factors, such as temperature and pH. The compressive strength of swollen D_6:1G₆ hydrogels was as high as 2219 kPa while compressive strain was 95%. Cyclic compression measurement exhibited good elastic properties of NC hydrogels. This work provides a facile method for fabricating stimuli‐responsive hydrogels with superior mechanical property. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 876–884     

A novel sodium carboxymethylcellulose/poly(N‐isopropylacrylamide)/Clay semi‐IPN nanocomposite hydrogel with improved response rate and mechanical properties

A novel semi‐IPN nanocomposite hydrogel (CMC/PNIPA/Clay hydrogel) based on linear sodium carboxymethylcellulose (CMC) and poly(N‐isopropylacrylamide) (PNIPA) crosslinked by inorganic clay was prepared. The structure and morphology of these hydrogels were investigated and their swelling and deswelling kinetics were studied in detail. TEM images showed that the clay was substantially exfoliated to form nano‐dimension platelets dispersed homogeneously in the hydrogels and acted as a multifunctional crosslinker. The CMC/PNIPA/Clay hydrogels swell faster than the corresponding PNIPA/Clay hydrogels at pH 7.4, whereas they swell slower than the PNIPA/Clay hydrogels at pH 1.2. The CMC/PNIPA/Clay nanocomposite hydrogels showed much higher deswelling rates, which was ascribed to more passway formed in these hydrogels for water to diffuse in and out. The deswelling process of the hydrogels could be approximately described by the first‐order kinetic equation and the deswelling rate decreased with increasing clay content. The mechanical properties of the CMC/PNIPA/Clay nanocomposite hydrogels were analyzed based on the theory of rubber elasticity. It was found that with increasing clay content, the effective crosslink chain density, v_e, increased whereas the molecular weight of the chains between crosslinks M_c decreased. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1546–1555, 2008