Tough and self‐recoverable hydrogels crosslinked by triblock copolymer micelles and Fe3+ coordination

Tough hydrogels have great potentials in soft robotics, artificial muscles, tissue replacement, and so on. Here we introduce novel tough hydrogels crosslinked by triblock copolymer (F127DA) micelles and metal coordination. The gels showed outstanding tensile strength (∼1–11 MPa), toughness (∼4–32 MJ m⁻³), and excellent self‐recovery properties (∼56.8–87.2% toughness recovery in 9 min at room temperature). The mechanical and self‐recovery properties could be manipulated by varying contents of micelles and/or COO⁻ groups. Dynamic mechanical analysis of the hydrogels revealed apparent activation energy and relaxations for both physical interactions. In situ small‐angle X‐ray scattering measurements on hydrogels upon stretching revealed micelle deformations. XPS measurements on hydrogels before and after stretching revealed significant changes in the binding energy of Fe³⁺ ions in the gels, suggesting the rupture of coordination bonds. The experimental results strongly suggest a synergistic effect from the micelle‐crosslinking and Fe³⁺–COO⁻ coordination on the strength, toughness, and self‐recovery of the hydrogels. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 865–876     

Interpenetrating thermophobic and thermophilic dual responsive networks

Poly(N‐acryloyl glycinamide) (PNAGA)/poly(N‐isopropyl acrylamide) (PNIPAAm) interpenetrating network (IPN) hydrogels were made by UV‐light initiated radical polymerization in two‐steps. The IPN hydrogels showed a double thermoresponsive behavior due to the combination of PNIPAAm (thermophobic) and PNAGA (thermophilic) networks. Increasing the content of the thermophobic PNIPAAm network leads to a change from a broad thermophilic volume phase transition temperature of PNAGA to a thermophilic–thermophobic‐type dual transition for the prepared IPN. Due to the double thermoresponsive character of the IPN gels, the mechanical properties are dependent upon temperature as demonstrated by performing tensile tests in water at 15 and 50 °C. Furthermore, the IPN hydrogels were characterized using turbidity measurements, SEM, and the determination of the equilibrium swelling ratio. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 539–544     

Hydrogen bond-reinforced double-network hydrogels with ultrahigh elastic modulus and shape memory property

Development of tough hydrogels has greatly expanded their applications as load-bearing materials. However, the elastic modulus of tough hydrogels is usually lower than 1 MPa. It remains a challenge to design tough hydrogels with high modulus. We report here a series of tough double-network (DN) hydrogels with ultrahigh elastic modulus (up to 200 MPa) by forming robust hydrogen bonds between the first poly(acrylic acid) network and the second poly(N-isopropyl acrylamide) network. The dense cooperative hydrogen bonds greatly reduce the segmental mobility and thus improve the rigidity of gel matrix. Owing to the dynamic nature of hydrogen bonds, the modulus of hydrogels is strongly influenced by temperature and pH, affording the gels shape memory property. The strategy by forming robust noncovalent bonds between interpenetrating networks should be applicable to other systems for designing tough and versatile hydrogels with diverse promising applications. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1281–1286     

Synthesis and characterization of physically crosslinked N‐vinylcaprolactam,acrylic acid,methacrylic acid,and N,N‐dimethylacrylamide hydrogels

Physically crosslinked hydrogels based on N‐vinylcaprolactam/acrylic acid and N‐vinylcaprolactam/methacrylic acid were prepared via free radical polymerization. These temperature responsive hydrogels were characterized in terms of glass transition, phase separation temperature, potentiometric titration and swelling properties. Results showed that phase transition temperature was dependent on the pH value of the solution; increasing pH led to higher lower critical solution temperature (LCST) values which was related to the dissociative behaviors of the carboxylic group of MAc in the buffered solutions. Additionally, with the incorporation of N,N‐dimethylacrylamide into the system, cloud point measurements and MDSC showed an increased in the LCST. This increase was based on hydrophilicity, the hydrophilic–hydrophobic balance was disturbed, and consequently, the LCST behavior was shifted. The pKa of the copolymers ranged between 5.6 and 6.5, while for the terpolymers pKa ranged between 5.3 and 6. At high pH (>10), the ? COOH group is deprotonated and negatively charged (? COO^?), while at low pH (1–3) the carboxylic group remains protonated which results in hydrogen bonding between the hydroxyl groups (from NaOH) and the excess of HCl. These results correlate with swelling studies where above the pKa value the hydrogels dissolved rapidly compared to below pKa they did not dissolve at all. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1555–1564     

Toughening hydrogels by immersing with oppositely charged polymers

A very simple yet novel strategy to significantly enhance the mechanical properties of hydrogels is reported. Poly(acrylic acid) (PAA) hydrogels with aligned macroporous channels are immersed in the aqueous solutions of poly(dimethyl diallyl ammonium chloride) (PDMDAAC). Strong electrostatic interactions are formed between the anionic PAA and cationic PDMDAAC chains. In the resultant PAA/PDMDAAC hybrid hydrogels, the mass ratio of PDMDAAC to PAA is about 0.2 and PDMDAAC is uniformly distributed throughout the gels. The mechanical properties of the formed hybrid hydrogels are largely enhanced in comparison with the original PAA hydrogels. The hybrid hydrogels exhibit high tensile strengths (0.38–1.73 MPa), elastic moduli (0.21–1.59 MPa) and toughness (up to 3.0 MJ/m³), about several to more than 10 times those of the corresponding PAA hydrogels. In addition, the PAA/PDMDAAC hydrogels also show excellent and very rapid shape recovery ability in both air and deionized water. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2432–2441     

High-strength hydrogels: Microstructure design,characterization and applications

Hydrogels are a class of polymeric network materials embedded in a water-rich environment. They are widely applied in drug delivery, actuator, and sensor. However, conventional hydrogels encountered limits from their poor mechanical property. Recent researches in hydrogels have been focusing on mechanical enhancement, ranging from design of microstructures to adjustment of compositions in hydrogels. Here, the design and fabrication strategies of high-strength hydrogels, as well as major progress in their typical strength-support applications are systemically reviewed. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1325–1335     

A novel block copolymer with excellent amphiphobicity synthesized via ARGET ATRP

The poly(methyl methacrylate)‐b‐poly(2‐[[[[2‐(perfluorohexyl)]‐sulfonyl]‐amino]ehthyl] methacrylate) (PMMA‐b‐PC₆SMA) copolymers were successfully synthesized for the first time using activator regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) method. Under optimized reaction conditions, the degree of polymerization (DP) of resulting copolymers increased approximately linearly with monomer conversion. Structures of a well‐defined block copolymer were determined by GPC, FT–IR, and ¹H‐NMR spectra. Results from AFM and contact angle measurements of polymer films revealed the presence of block segments derived from PC₆SMA, as indicated by the obvious increase in hydrophobicity and oleophobicity. The relationship between surface composition and surface wetting ability was confirmed by XPS and AFM spectra. Compared with the random copolymer PMMA‐co‐PC₆SMA, C₆SMA dosages in the PMMA‐b‐PC₆SMA copolymers were greatly decreased, which retained its hydrophobic and oleophobic properties. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2040–2049     

Synthesis of a new hyperbranched,vinyl macromonomer through the use of click chemistry: Synthesis and characterization of copolymer hydrogels with PEG diacrylate

A new biodegradable, water‐soluble macromonomer based on the commercial hyperbranched polyester Boltorn^®H20 has been synthesized through the use of click chemistry. The macromonomer was developed with the aim of being injected with a comacromonomer, poly(ethylene glycol) (PEG) diacrylate, for in situ copolymerization to form biodegradable polymer hydrogels. Copolymer hydrogels were prepared from the macromonomer and PEG diacrylate (FW 700) by free radical copolymerization. A degree of phase separation of the hydrogels was observed during polymerization and with increasing incorporation of the Boltorn macromonomer an increasing tendency for the formation of macropores was observed. The swelling ratios of the gels in water and phosphate buffered saline solution, PBS, all increase with increasing Boltorn macromonomer concentration, as did the penetrant diffusion coefficients and the degradation rate in PBS. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A Sequential Debonding Fracture Model for Hydrogen-Bonded Hydrogels

Hydrogen bonds are known to play an important role in prescribing the mechanical performance of certain hydrogels such as polyether-based polyurethanes. The quantitative contribution of hydrogen bonds to the toughness of polymer networks, however, has not been elucidated to date. Here, a new physical model is developed to predict the threshold fracture energies of hydrogels physically crosslinked via hydrogen bonds. The model is based on consecutive and sequential dissociation of hydrogen-bonded crosslinks during crack propagation. It is proposed that the scission of hydrogen bonds during crack propagation allows polymer strands in the deformation zone to partially relax and release stored elastic energy. The summation of these partial chain relaxations leads to amplified threshold fracture energies which are 10–45 times larger than those predicted by the classical Lake–Thomas theory. Experiments were performed on a hydrophilic polyurethane hydrogel where urea additions were used to control the density of hydrogen bonds. The measured fracture energies were in good agreement with the calculated values. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1287–1293     

Thermoplastic amphiphilic conetworks

Our main objective was the design, synthesis, characterization, and testing of a novel class of materials, thermoplastic amphiphilic conetworks (TP‐APCNs). A further objective was the evaluation of TP‐APCNs as biomaterials, for example, as immunoisolatory membranes in a bioartificial pancreas, or as extended‐wear soft contact lenses. The synthesis of the first TP‐APCNs was accomplished by blending an amphiphilic graft polymer, poly(dimethyl acryl amide)‐g‐polydimethylsiloxane (PDMAAm‐g‐PDMS), with a commercial PDMS‐containing polyurethane (PU). The common PDMS segments coalesce and form a single phase, whereas the hard/crystalline segments of the PU physically crosslink the blend. The properties of TP‐APCNs can be controlled by the graft/PU ratio and segment molecular weights. TP‐APCNs with cocontinuous hydrophilic and hydrophobic phases were prepared as demonstrated by swelling in water and n‐heptane. Depending on the blend ratio and molecular weights, optically clear water‐swollen TP‐APCNs with 0.5–4 MPa tensile strength, 70–280% elongation, together with 2–11 × 10^?7 cm²/s glucose permeability, and 1.2–8 × 10^?8 cm²/s insulin permeability were prepared. TP‐APCNs are processible by casting and molding. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 682–691, 2009     

Double-networks based on interconnected amphiphilic “in–out” star first polymer conetworks prepared by RAFT polymerization

Double-network hydrogels were prepared using well-defined first networks comprising interconnected amphiphilic “in-out” star copolymers synthesized via sequential reversible addition-fragmentation chain transfer (RAFT) polymerization, and second networks based on a photopolymerized mixture of acrylamide and N,N′-methlyenebisacrylamide. All first and double-network hydrogels were characterized in terms of their aqueous degrees of swelling and mechanical properties in compression. The most hydrophobic first and double-network hydrogels exhibited the best mechanical properties, which may be attributed to their low aqueous swelling degrees and good mesoscale organization in water as revealed using small-angle neutron scattering (SANS) which showed that the size of the formed hydrophobic domains could be controlled by the polymer conetwork structure. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2161–2174     

Polyimide incorporated cyanate ester/epoxy copolymers for high-temperature molding compounds

The rapid development of high-power devices has driven the requirement for high-temperature stable epoxy molding compounds. In this work, a designed polymer blend system consisting of cyanate ester/epoxy copolymers modified by polyimide (CE/EP-PI) has been studied. Polyimide used in this study has shown excellent dispersity in the cyanate ester and epoxy copolymer network (CE/EP), exhibiting homogeneous phase with a denser polymer network structure. With this polymer blend structure, CE/EP-PI system was proved to have a glass transition temperature as high as ~270 °C, increased modulus, and largely enhanced fracture toughness up to 2.06 MPa m^1/2. CE/EP-PI resins showed outstanding long-term stability at high temperature with low mass loss and increased fracture toughness after aging at 200 °C. This work provides a novel insight into the development of molding compounds based on polymer blends system with excellent high-temperature properties. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2412–2421     

Self‐assembled graphene oxide–gelatin nanocomposite hydrogels: Characterization,formation mechanisms,and pH‐sensitive drug release behavior

Novel physically crosslinked graphene oxide (GO)‐gelatin nanocomposite hydrogels were obtained by self‐assembly. The hydrogels with various ratios of GO to gelatin were prepared, and characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, and scanning electron microscopy. The static and dynamic rheological properties of the hydrogels were investigated, along with the underlying hydrogel formation mechanisms. The storage modulus of the hydrogels (containing 98–98.5 wt % water) reached 114.5 kPa, owing to the relatively strong physical bonding (i.e., hydrogen bonding and electrostatic forces) between GO and gelatin. Drug release tests showed that the drug release from the hydrogel was pH‐dependent, with 96% of the model drug released in a neutral environment, compared to 28% released in an acidic medium. These hydrogels could have potential in pH‐sensitive drug delivery. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 356–367     

Poly(ethylene glycol)–poly(L‐lactide) star block copolymer hydrogels crosslinked by metal–ligand coordination

The aqueous solution behavior and thermoreversible gelation properties of pyridine‐end‐functionalized poly(ethylene glycol)–poly(L ‐lactide) (PEG–(PLLA)₈–py) star block copolymers in the presence of coordinating transition metal ions were studied. In aqueous solutions, the macromonomers self‐assembled into micelles and micellar aggregates at low concentrations and formed physically crosslinked, thermoreversible hydrogels above a critical gel concentration (CGC) of 8% w/v. In the presence of transition metal ions like Cu(II), Co(II), or Mn(II), the aggregate dimensions increased. Above the CGC, the gel–sol transition shifted to higher temperatures due to the formation of additional crosslinks from intermolecular coordination complexes between metal ions and pyridine ligands. Furthermore, as an example, PEG–(PLLA)₈–py hydrogels stabilized by Mn(II)–pyridine coordination complexes were more resistant against degradation/dissolution when placed in phosphate buffered saline at 37 °C when compared with hydrogels prepared in water. Importantly, the stabilizing effect of metal–ligand coordination was noticeable at very low Cu(II) concentrations, which have been reported to be noncytotoxic for fibroblasts in vitro. These novel PEG–(PLLA)₈–py metallo‐hydrogels, which are the first systems to combine metal–ligand coordination with the advantageous properties of PEG–PLLA copolymer hydrogels, are appealing materials that may find use in biomedical as well as environmental applications like the removal of heavy metal ions from waste streams. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,characterization, and evaluation of novel polyhydantoins as gas separation membranes

Novel polyhydantoins ( PHYs ) were synthesized from original aromatic diisocyanates and bisiminoacetates by a two‐step polycondensation procedure, which involved the cyclization of polyurea intermediates promoted by acid catalysis. The physical properties of the novel PHYs were evaluated by comparing them with a classical PHY derived from 4,4′‐methylenediphenyl diisocyanate. All PHYs were soluble and could be processed into dense films, which showed good mechanical properties (tensile strength up to 110 MPa) and thermal stability of >400 °C. High glass transition temperatures (T_gs), ranging from 260 to 410 °C, were observed. Fractional free volume (FFV) was strongly dependent on the chemical structure, and a linear correlation between gas permeability and FFV of PHYs could be found. The gas separation properties were comparable to those of the commercial polyimide Matrimid^®, with the exception of one of the PHYs which exhibited very promising properties as its gas productivity was comparable to the gas separation performance of well‐established experimental polyimides. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4052–4060     

Double network hydrogels with controlled shape deformation: A mini review

Double network hydrogels (DN gels), consisting of two networks with strongly asymmetric network structures and properties, are one of most investigated high strength hydrogels. In most cases, the first network of DN gels is rigid, brittle and tightly crosslinked, while the second network is soft, ductile and loosely crosslinked. Because of the tunable and diverse network structures, DN gels with controlled shape deformation have attracted great attention in recent years. The shape deformation of DN gels can be controlled by first network, second network, or both networks. In this mini review, the shape deformation of DN gels via different networks will be summarized, and the application and future perspectives also are discussed. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1351–1362     

Synthesis and characterization of thermoresponsive hydrogels cross-linked with chitosan

Hydrogels composed of N-isopropylacrylamide (NIPAAm) and acrylic acid (AAc) were prepared by redox polymerization with degradable chitosan cross-linkers. Chitosan degradable cross-linkers were synthesized by the acrylation of the amine groups of glucosamine units within chitosan and characterized with ¹H NMR. With the chitosan cross-linkers, loosely cross-linked poly(N-isopropylacryamideco-acrylic acid) [P(NIPAAm-co-AAc)] hydrogels were prepared, and their phase transition behavior, lower critical solution temperature (LCST), water content and degradation properties were investigated. The chitosan cross-linked P(NIPAAm-co-AAc) hydrogels were pliable and transparent at room temperature. The LCST could be adjusted at 32∼39°C by alternating the feed ratio. Swelling was influenced by NIPAAm/AAc monomer ratio, cross-linking density, swelling media, and temperature. All hydrogels with different feeding ratios contained more than 95% water at 25°C in the ultra pure water and phosphate-buffered saline (PBS, pH = 7.4 ± 0.1), and had a prospective swelling in the simulated gastric fluids (SGF, pH = 1.2) > 72.54%. In degradation studies, breakdown of the chitosan cross-linked P(NIPAAm-co-AAc) hydrogels was dependent on the cross-linking density. The chitosan cross-linked P(NIPAAm-co-AAc) hydrogels which can be tailored to create environmentally-responsive artificial extracellular materials have great potential for future use.      

Determination of glucosamine and its derivatives released from photocrosslinked gelatin hydrogels using HPLC

A simple, accurate and validated reverse‐phase high‐performance liquid chromatography (HPLC)/UV method is developed for the determination of glucosamine hydrochloride (GlcN), N‐acetyl‐glucosamine (NAG) and N‐acryloyl‐glucosamine (AGA) released from photocrosslinked gelatin hydrogels. The HPLC separation was achieved on a Shimadzu InertSustain amino column (250 × 4.6 mm, 5 µm particle size) at room temperature using a mobile phase of acetonitrile–phosphate buffer (75:25, v/v, pH 6.0) at a flow rate of 1.0 mL/min and UV detection of 194 nm. The method was validated for specificity, linearity, limit of detection and quantification, accuracy, precision, extraction recovery and solution stability. The calibration curves were with excellent linearity, with correlation coefficients (R²) >0.999 for all three drugs. The intra‐ and inter‐day variation was <3.10% and the relative error was between ?1.43 and 1.78%. The extraction recovery results ranged from 94.62 to 99.33%, demonstrating the absence of matrix effect. The sample and standard solutions were stable for more than 2 months. The method was successfully used for the analysis of released properties of drugs physically encapsulated and chemically crosslinked in the gelatin hydrogels. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and properties of novel sulfonated polyimides containing binaphthyl groups as proton‐exchange membranes for fuel cells

A novel sulfonated diamine monomer, 2,2′‐bis(p‐aminophenoxy)‐1,1′‐binaphthyl‐6,6′‐disulfonic acid (BNDADS), was synthesized. A series of sulfonated polyimide copolymers containing 30–80 mol % BNDADS as a hydrophilic component were prepared. The copolymers showed excellent solubility and good film‐forming capability. Atomic force microscopy phase images clearly showed hydrophilic/hydrophobic microphase separation. The relationship between the proton conductivity and degree of sulfonation was examined. The sulfonated polyimide copolymer with 60 mol % BNDADS showed higher proton conductivity (0.0945–0.161 S/cm) at 20–80 °C in liquid water. The membranes exhibited methanol permeability from 9 × 10^?8 to 5 × 10^?7 cm²/s at 20 °C, which was much lower than that of Nafion (2 × 10^?6cm²/s). The copolymers were thermally stable up to 300 °C. The sulfonated polyimide copolymers with 30–60 mol % BNDADS showed reasonable mechanical strength; for example, the maximum tensile strength at break of the sulfonated polyimide copolymer with 40 mol % BNDADS was 80.6 MPa under high moisture conditions. The optimum concentration of BNDADS was found to be 60 mol % from the viewpoint of proton conductivity, methanol permeability, and membrane stability. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 222–231, 2007     

In situ photocrosslinkable hyaluronic acid‐based surgical glue with tunable mechanical properties and high adhesive strength

Hyaluronic acid (HA), a naturally occurring linear polysaccharide, has been widely used as a key biomaterial in a range of cosmetic and therapeutic applications. Its excellent biocompatibility and bio‐functions related to tissue regeneration encourage the development of HA‐based hydrogels to expand its applications. This study details an in situ forming surgical glue based on photocrosslinkable HA, providing tunable mechanical properties and firm tissue adhesion under wet and dynamic conditions. Depending on the degree of photocrosslinkable methacrylate groups in HA polymer chains, the mechanical properties of hyaluronate methacrylate (HAMA) hydrogels prepared by UV photocrosslinking was improved. Ex vivo adhesion tests revealed that HAMA hydrogels exhibited 3‐fold higher shear adhesive strength compared to gelatin methacryloyl hydrogels and achieved firm adherence to the porcine skin tissue for several weeks. The high adhesive strength of HAMA hydrogels, under dry and wet conditions, suggests that it may have great promise as a tissue adhesive. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 522–530