吸收光谱法研究新型双钼配合物{Mo[S2CN(C2H5)2 4}{MOCl6)}的结构

双钼配合物〔Mo(DTC)₄〕〔MoCl₆〕(其中DTC=S₂CN(C₂H₅)₂)由于它在一个分子中同时包含两个处于不同配位环境中的、表观氧化态都是正五价的钼,即:一个Mo⁵⁺与四个DTC配体构成配位阳离子〔Mo(DTC)₄〕⁺;另一个Mo⁵⁺与氯离子配体构成配位阴离子〔MoCl₆〕^-而独具特色。本文首次发表了它的红外和紫外-可见吸收光谱数据,并通过初步的光谱分析,确定了上述配合物的结构特征。     

Synthesis,characterization and reactivity of thiolate-bridged cobalt-iron and ruthenium-iron complexes

Thiolate-bridged hetero-bimetallic complexes [Cp*M（Me CN）N₂S₂Fe Cl][PF₆]（2, M = Ru; 3, M = Co, Cp*= η⁵-C₅Me₅, N₂S₂= N,N’-dimethyl-3,6-diazanonane-1,8-dithiolate） were prepared by self-assembly of dimer [N₂S₂Fe]₂ with mononuclear precursor [Cp*Ru（MeCN）₃][PF₆] or [Cp*Co（Me CN）₃][PF₆]₂ in the presence of CHCl₃ as a...     

新型金属-双二硫杂戊烯(M-BDT)配合物的合成、表征及X射线的指标化

合成了4个新型NiBDT配位化合物,BDT为具有9个S原子的杂戊烯.元素分析、IR谱、UV谱确定这4个新配合物的化学式分别为[(CH₃)₄N]₂[Ni(C₅S₉)₂](1),[(C₂H₅)₄N]₂·[Ni(C₅S₉)₂](2),[(C₄H₉)₄N]₂[Ni(C₅S₉)₂](3),[(C₆H₅)(CH₃)₃N]₂[Ni(C₅S₉)₂](4).采用Ito法对配合物1的X射线粉末图进行了指标化,确定该晶体属单斜晶系,简单晶格,晶胞参数:a=0.680nm,b=0.714nm,c=2.302nm,γ=111.4°,Z=2.     

过渡金属-联咪唑-Dawson型钨磷酸盐杂化化合物的酶固定化性能

利用水热法和直接沉淀法, 设计合成了5例由过渡金属(TM)-联咪唑配阳离子与Dawson型钨磷酸阴离子构成的多金属氧酸盐(POM)基有机-无机杂化化合物[Ni(H₂biim)₃]₄[Ni(H₂biim)₂(P₂W₁₈O₆₂)₂]·2H₂O(1), [Co^III(H₂biim)₃]₂[P₂W₁₈O₆₂]·8H₂O(2), [Cu(H₂biim)₂]₃[P₂W₁₈O₆₂]·4H₂O(3), [Co^II(H₂biim)₃]₂H₂[P₂W₁₈O₆₂]·9H₂O(4)和 [Ni(H₂biim)₃]₃[P₂W₁₈O₆₂]·2H₂O(5); 并利用X射线单晶衍射分析(SC-XRD)、 红外光谱(IR)和热重-差热分析 (TG-DTA)等对其进行了表征. 化合物1~5作为载体用于固定辣根过氧化物酶(HRP)时, 显示出了较高的酶固定化能力. 另外, 利用圆二色光谱(CD)和激光扫描共聚焦显微镜(LSCM)等方法评价了固定化酶HRP/1~HRP/5的重复使用性、 储存稳定性和检测过氧化氢(H₂O₂)的性能. 由于该类POMs与HRP间存在强的相互作用, 利用简单的物理吸附法即可实现POMs对HRP的固载. POMs对酶的固定不但提高了HRP对使用及储存环境的耐受性, 同时也拓展了POMs在酶固定化领域的应用.     

基于三联吡啶-4-羧酸的系列配合物的结构多样性和发光性质（英文）

在溶剂热条件下制备了系列新配合物：[Cr₂(tpc)₂(HCOO)₂(OH)₂]·4H₂O (1)、[Ba(tpc)₂(H₂O)₂]_n (2)、[Zn₂(tpc)₂(NO₃)₂]_n (3)、[Pb(Htpc)(NO₃)₂]·2H₂O (4)和[Rh(Htpc)Cl₃]·CH₃OH·H₂O (5)(Htpc=2,2′∶6,2″-三联吡啶-4-羧酸)。X射线单晶衍射分析表明,有机配体呈4种不同的配位方式;配合物1～5通过C—H…O/N氢键和π…π相互作用形成了新颖的超分子网络。研究了这些配合物的发光性能。在365 nm紫外辐射下,晶体2～5分别呈现绿色、蓝色...     

新奇二茂铁甲基氮C60衍生物的合成、结构

尽管目前人们对富勒烯[C₆₀]的过渡金属有机物研究较多^[1],但通过氮卡宾方式连接的C₆₀二茂铁衍生物尚未见报道。鉴于对C₆₀反应的浓厚兴趣及二茂铁的广泛应用价值^[2]我们 利用C₆₀的缺电子性^[3]将其与二茂铁甲基氮卡宾进行[1+2]环加成反应,分离并表征了一种具有齿轮式结构的新奇C₆₀二茂铁衍生物(CpFeC₅H₄CH₂N)5C₆₀(l)。     

有机-无机型杂多酸相转移催化氧化脱硫性能研究

合成了四种有机-无机型杂多酸催化剂,包括[π-C₅H₅NC₁₆H₃₃]₃[PW₄O₁₆],[π-C₅H₅NC₁₆H₃₃]₃[PMo₄O₁₆],[π-C₅H₅NC₁₂H₂₅]₃[PW₄O₁₆]和[π-C₅H₅NC₁₂H₂₅]₃[PMo₄O₁₆]. 以有机硫的正辛烷溶液为模拟油品,H₂O₂为氧化剂,乙腈为萃取剂,在两相体系中,考察了上述四种催化剂对模拟油品中二苯并噻吩(DBT)氧化脱硫的催化活性. 结果表明,[π-C₅H₅NC₁₆H₃₃]₃[PW₄O₁₆]具有最佳的催化活性. 采用[π-C₅H₅NC₁₆H₃₃]₃[PW₄O₁₆]进行后续研究发现,反应完毕,[π-C₅H₅NC₁₆H₃₃]₃[PW₄O₁₆]以沉淀的形式析出,可以重复利用且脱硫效果很好. 研究表明,上述有机-无机型杂多酸属于相转移催化剂,氧化脱硫反应体系属于反应控制相转移催化体系. 在相同实验条件下,由于电子云密度和空间位阻效应共同的作用,DBT、噻吩(TH)、苯并噻吩(BT)和4,6-二甲基二苯并噻吩(4,6-DMDBT)脱硫由易到难的顺序为DBT >4,6-DMDBT >BT >TH,并分别通过GC-MS分析确定它们的氧化产物. 将[π-C₅H₅NC₁₆H₃₃]₃[PW₄O₁₆]进一步应用于柴油氧化脱硫,其中硫含量由355 mg/kg (mg/kg等同于ppmw)降至26 mg/kg,去除率达92.7%. 利用上述四种有机-无机型杂多酸作催化剂,研究DBT氧化反应过程动力学,确定DBT的表观反应级数均为一级,表观活化能为47.9～55.4 kJ/mol.     

二苯并噻吩及其氧化物与离子液体相互作用的理论研究

采用密度泛函理论方法比较了DBT/DBTO₂和[BMIM]⁺[PF₆]^-/[BMIM]⁺[BF₄]^-的相互作用。对最稳定的[BMIM]⁺[PF₆]^-、[BMIM]⁺[PF₆]^--DBT、[BMIM]⁺[PF₆]^--DBTO₂、[BMIM]⁺[BF₄]^-、[BMIM]⁺[BF₄]^--DBT、[BMIM]⁺[BF₄]^--DBTO₂进行了NBO和AIM分析。结果表明,DBT和[BMIM]⁺[PF₆]^-/[BMIM]⁺[BF₄]^-中的咪唑环彼此相互平行,NBO和AIM分析表明它们之间发生了π-π相互作用。H1'和H9'形成的F…H氢键有利于π-π堆积作用的形成。DBTO₂倾向于趋近C2-H2和甲基基团形成O…H相互作用;DBTO₂优先吸附在[BMIM]⁺[PF₆]^-/[BMIM]⁺[BF₄]^-。在模拟油中,[BMIM]⁺[PF₆]^-和[BMIM]⁺[BF₄]^-离子液体对DBTO₂的萃取能力大于DBT,其原因是可能是DBTO₂具有较大的极性和O…H与F…H的氢键作用。     

Self-assembly of three Ag-polyoxovanadates frameworks for their efficient construction of C–N bond and detoxification of simulant sulfur mustard

Three imidazole-modified Ag-polyoxovanadates frameworks（APFs） with a controllable molar ratio of Ag+to polyoxovanadates（POVs） [Ag（IM）₂]₂V₄O₁₂·2Ag（IM）₂（APF-1）, [Ag₂（1-e IM）₄]₂[Ag（1-e IM）₂]3·2Ag（1-e IM）₂·3（1-He IM）[V₁₀O₂₈]₂（APF-2） and [Ag（1-pIM）₂]₃[HV₁₀O₂₈]·2Ag（1-pIM）₂·2H₂O（APF-3）(IM = imidaz...     

三苯基膦：转换硫醇保护的纳米粒子成[Au25(PPh3)10(SR)5Cl2]2+

我们在此报道了一种未曾发现的有趣现象：尽管[Au₂₃(SC₆H₁₁)₁₆]⁻、Au₂₄(SC₂H₄Ph)₂₀ (Ph:苯环)、Au₃₆(TBBT)₂₈ (TBBTH:对叔丁基苯硫酚)、Au₃₈(SC₂H₄Ph)₂₄、混合Au_x(SC₂H₄Ph)_y团簇及3 nm的金纳米粒子有不同的组成、结构、尺寸和保护性硫醇配体,但它们在三苯基膦(PPh₃)作用下,均能统一地经由亚稳的[Au₁₁(PPh₃)₈Cl₂]²⁺最终转化为稳定的双二十面体[Au₂₅(PPh₃)₁₀(SR)₅Cl₂]²⁺ (SR:硫醇配体)。换句话说,三苯基膦是这些硫醇保护的纳米粒子的统一转化器。然而,聚乙烯吡咯烷酮(PVP)/柠檬酸盐(Citrate)保护的金纳米粒子和[Ag₂₅(SPhMe₂)₁₈]⁻ (Me:甲基)在同样的条件下,却不能转化为[Au₂₅(PPh₃)₁₀(SR)₅Cl₂]²⁺或[Ag₂₅(PPh₃)₁₀(SR)₅Cl₂]²⁺,暗示了硫醇保护的金纳米粒子具有与三苯基膦反应的独特性能。另外,我们考察了配体对双二十面体[Au₂₅(PPh₃)₁₀(SR)₅Cl₂]²⁺团簇荧光性能的影响。     

A STUDY OF THE REDOX CHARACTERISTICS OF THE TERNARY CLATHRATE COMPOUND Mo[S2CN(C2H5)2]4}+{FeCl4}-C6H5CH2SSCH2C6H5

The redox characteristics of the ternary clathrate compound {Mo[S₂CN(C₂H₅)₂]₄}⁺{C₆H₅CH₂SSCH₂C₆H₅}^-was studied by electrochemical measurement and quantum-chemical calculations.The cyclic voltammogram of this ternary clathrate compound in 0.1M KClO₄-DMF with a platinum electride had 2.pairs of redox peak.Both the electrochemical parameters derived from the voltammogram and the results of EHMO calculations indicate that the pair of redox peak at relatively positive potentials corresponds to the redox reaction of Fe(Ⅲ)/Fe(Ⅱ) which is irreversible in nature,while the pair of redox peak at more negative potentials corresponds to the redox reaction of Mo(Ⅴ)/ Mo(Ⅱ) which is semi-reversible.The calculations from experiment measurements are fairly agreement with the theoretical calculations.     

Mo-Fe-S三元包合物氧化还原特性的研究

本文结合电化学测量和量子化学计算对Mo-Fe-S三元包合物的氧化还原特性进行了研究。用铂电极测得的该包合物在0.1MKClO₄-DMF溶液中的循环伏安图显现出两对氧化-还原峰,由此得到的电化学参数与EHMO计算结果都表明,电位较正的一对峰相应于Fe(Ⅲ)/Fe(Ⅱ)的氧化还原,反应不可逆。电位较负的一对峰相应于Mo(Ⅴ)/Mo(Ⅳ)的氧化还原反应半可逆。     

Electron transfer of quinone self-assembled monolayers on a gold electrode

Dialkyl disulfide-linked naphthoquinone, (NQ-C_n-S)₂, and anthraquinone, (AQ-C_n-S)₂, derivatives with different spacer alkyl chains (C_n: n = 2, 6, 12) were synthesized and these quinone derivatives were self-assembled on a gold electrode. The formation of self-assembled monolayers (SAMs) of these derivatives on a gold electrode was confirmed by infrared reflection-absorption spectroscopy (IR-RAS). Electron transfer between the derivatives and the gold electrode was studied by cyclic voltammetry. On the cyclic voltammogram a reversible redox reaction between quinone (Q) and hydroquinone (QH₂) was clearly observed under an aqueous condition. The formal potentials for NQ and AQ derivatives were −0.48 and −0.58 V, respectively, that did not depend on the spacer length. The oxidation and reduction peak currents were strongly dependent on the spacer alkyl chain length. The redox behavior of quinone derivatives depended on the pH condition of the buffer solution. The pH dependence was in agreement with a theoretical value of E_1/2 (mV) = E′ − 59pH for 2H⁺/2e⁻ process in the pH range 3–11. In the range higher than pH 11, the value was estimated with E_1/2 (mV) = E′ − 30pH , which may correspond to H⁺/2e⁻ process. The tunneling barrier coefficients (β) for NQ and AQ SAMs were determined to be 0.12 and 0.73 per methylene group (CH₂), respectively. Comparison of the structures and the alkyl chain length of quinones derivatives on these electron transfers on the electrode is made.     

双二苯基-1-甲基咪唑膦氯化镍的制备及其电催化还原CO2的研究

以二苯基-1-甲基咪唑膦（dpim）为配体制备了一种新型的配合物催化剂Ni(dpim)₂Cl₂. 循环伏安研究表明,Ni(dpim)₂Cl₂配合物在氮气气氛下表现出两步还原的电化学行为,在-0.7 V下为两电子的不可逆还原,在-1.3 V下为单电子准可逆还原. 向电解液中通入CO₂后,在-1.3 V下的还原峰变得不可逆,且其峰电流从0.48 mA·cm^-2增大到0.55 mA·cm^-2. 在质子源（CH₃OH）存在的条件下,该还原峰电流可继续增大到0.72 mA·cm^-2. 该研究结果表明,Ni(dpim)₂Cl₂配合物对CO₂还原具有良好的电催化性能,且其电催化还原过程符合ECE机理. 在-1.3 V下恒电位电解得到的还原产物主要为CO,催化转换频率（Turnover of Frenquency, TOF）为0.17 s^-1.     

Keggin结构稀土钼钒磷四元杂多配合物的合成、表征及苯酚羟化制苯二酚的催化活性

合成了5种通式为(NH₄)₁₅[RE(PMo₉V₂O₃₉)₂]·xH₂O(RE=La³⁺,Ce³⁺,Gd³⁺,Y³⁺,Yb³⁺)的稀土钼钒磷四元杂多配合物,并用IR,UV,XRD,ICP,TG-DTA和CV等手段对其结构和性能进行了表征.催化活性实验表明,标题化合物对苯酚过氧化氢羟化制苯二酚反应有良好的催化活性.     

计时电量法求NiCl2(bpy)3在DMF中的扩散系数和速率常数

讨论了NiCl₂(bpy)₃(bpy：2,2-联吡啶)在DMF中的电化学行为. 控制电位使电极过程处于扩散控制下, 采用计时电量法求得了29 ℃时NiCl₂(bpy)₃在DMF中的扩散系数为5.99×10^－6 cm²•s^-1, 不同温度下的扩散系数随温度升高而增大. 选择合适的电极电位, 使电极过程处于扩散和电化学混合控制下, 采用计时电量法求得了不同电极电位下的反应速率常数k_f, 以及不同温度下的标准速率常数k⁰, 求得了表观活化能为14.4 kJ•mol^-1.     

Electrochemical properties of a ruthenium complex immobilized as thin films and in carbon paste electrodes

The electrochemical properties of mer-[RuCl₃(dppb)(4-pic)] (dppb = Ph₂P(CH₂)₄PPh₂, 4-pic = CH₃C₅H₄N), Rupic, in CHCl₃ are governed by the formation of species such as [Ru₂Cl₅(dppb)₂], [Ru₂(dppb)₂Cl₄(4-pic)] and trans-[RuCl₂(dppb)(4-pic)₂] upon the reduction of “[RuCl₂(dppb)]”. The overall behavior depends on whether Rupic is immobilized in cast or Langmuir–Blodgett (LB) films, or incorporated into a carbon paste electrode (CPE). In cyclic voltammograms, one redox process appears for LB/Rupic films and CPE/Rupic, at E_pa = 0.35 V, E_pc = 0.25 V vs SCE, and E_pa = 0.32 V, E_pc = 0.24 V vs Ag/AgCl, respectively. This redox process was ascribed to the Ru^III/Ru^II charge transfer. For cast films the redox pair was poorly defined, with E_pa = 0.27 V and E_pc = 0.20 V. The reason for the difference lies in the phase separation and formation of aggregates onto ITO for the cast film, in contrast to the LB film. With aggregation, the formation of species occurring in solution is impaired for Rupic in cast films. The electrochemical properties for Rupic in LB films and incorporated into CPE allowed the electrocatalytic activity of Rupic to be exploited in sensors for dopamine and ascorbic acid.     

Preparation and photoelectrochemical characterization of nano-particulate TiO2 and polyaniline composite films on Au

TiO₂ and polyaniline(PANI) composite film was obtained by electrochemical methods^[1] and investigated for solar energy conversion application. A strong rectifying effect was found in the cyclic voltammogram of the film in dark when the scan speed was slow enough (5 mV/s) and a quasi-reversible voltammogram of the film was observed when the scan speed was fast (100 mV/s). The results of both the cyclic voltammograms and the SEM images of the composite film show that the PANI film is almost completely covered with nano-particulate TiO₂. Two anodic photocurrent bands and a cathodic band was observed in the spectra of the photocurrent of the TiO₂/PANI/PATP(p-aminothiophenol)/Au film in 0.05 mol/L Fe(CN)₆^3-/Fe(CN)₆^4- solution. The band at 300~400 nm (3.1~4.1 eV) can be ascribed to the photocurrent band of TiO₂ particles and the bands at 450~730 nm (1.7~2.8 eV) can be ascribed to those of the PANI. The partially-oxidized PANI has internal photoemission function and the insulating matrix of PANI is verified to be reduced PANI with a 3.33 eV bandgap energy. The flat-band potentials of partially-oxidized PANI and TiO₂/PANI composite film in 1.0 mol/LHClO₄ solution are determined as 0.87 V and 0.09(SHE) from Mott-Schottky plots, respectively.     

Photophysical, electrochemical and electrochromic properties of copper-bis(4,4′-dimethyl-6,6′-diphenyl-2,2′-bipyridine) complexes

The synthesis, solution and solid state structural characterization, photophysical and electrochemical properties of two redox forms of an electrochromic copper-bis(4,4′-dimethyl-6,6′-diphenyl-2,2′-bipyridine) complex, [Cu(3)₂]ⁿ (n=+1, +2), are presented. Both complexes were characterized in the solid state by X-ray diffraction methods on single-crystals showing that both forms exist in a pseudo-tetrahedral coordination, and a comparison with other structures was made. Like most copper(I) complexes, the red [Cu(3)₂]⁺ complex shows a rather weak emission (Φ_em=2.7×10⁻⁴, dichloromethane). The lifetime of the emitting MLCT state is 34±1 ns, as observed with time resolved emission, and transient absorption (in deoxygenated dichloromethane). Typical emission and transient absorption spectra are presented. The transient absorption spectra indicate that the MLCT state absorbs stronger than the ground state, which is relatively uncommon for metal bipyridine complexes, i.e. no ground state bleaching is observed. The green [(3)₂Cu]²⁺ complex does not show any observable emission or transient absorption, which is a common feature for Cu(II) complexes of this type. The electronic absorption spectra of the chemically and electrochemically produced copper(I/II) complexes are identical. The repeated electrochemical conversion of the Cu(I) center into Cu(II) and vice versa does not cause any decomposition. This is consistent with a fully reversible Cu(I)/Cu(II) redox couple in the corresponding cyclic voltammogram, (E_1/2 (Cu(I)/Cu(II))=+0.68 V vs. SCE=+0.23 V vs. Fc/Fc⁺). These observations indicate that no large structural reorganization occurs upon electrochemical timescales (sub second), and that the different ways of generating the complexes does not effect their final structure, apart from the small differences observed in the X-ray structures of both forms. These characteristics make these complexes rather well suited for their incorporation into an electrochromic display configuration.     

碳热还原辅助溶胶-凝胶法制备氟代聚阴离子型嵌/脱锂材料LiVPO4F/C

采用碳热还原辅助溶胶-凝胶法合成了锂二次电池正极材料LiVPO₄F/C, 探讨煅烧温度和煅烧时间对所制备材料纯度、结构和电化学性能的影响. 采用X射线衍射(XRD), 扫描电子显微镜(SEM), 恒流充放电, 电化学阻抗谱(EIS)和循环伏安(CV)等手段对不同煅烧温度和时间所得的材料进行结构表征和电化学性能测试. 当煅烧时间为4 h 时, 温度为450 ℃时, 能够得到纯相LiVPO₄F/C, 在0.1C、0.5C和1.0C倍率下, 电池放电比容量分别为193.2、175.6 和173.7 mAh·g^-1. 随着煅烧温度升高, Li₃V₂(PO₄)₃杂相逐渐增多, 650 ℃煅烧后的材料Li₃V₂(PO₄)₃ 成为主相. 优化煅烧时间也能够有效控制Li₃V₂(PO₄)₃ 杂相的生成, 能得到电化学性能良好的LiVPO₄F/C. 当煅烧温度为550 ℃时, 反应3 h后得到的产物综合电化学性能最优.