Immobilization and electrochemistry of cytochrome c on amino-functionalized mesoporous silica thin films

The immobilization and electrochemistry of cytochrome c (cyt c) on amino-functionalized mesoporous silica thin films are described. The functionalized silica films with an Im3m cubic phase structure were deposited on conducting ITO substrate by co-condensation of tetraethoxysilane (TEOS) and 3-aminopropyltriethoxysilane (APTES) in the presence of Pluronic F127 under acidic conditions. The high specific surface area, large pore size and functional inner surface of mesoporous silica thin films result in a high cyt c loading, and the cyt c immobilization on this silicate framework is stable. After adsorption of cyt c, the ordered cubic structure of mesoporous silica and the redox activity of immobilized cyt c are retained as demonstrated by X-ray diffraction (XRD), Transmission electron microscope (TEM) and cyclic voltammetry. The redox behavior of the cyt c/silica film-modified ITO electrode is a surface-controlled quasi-reversible process for the experimental conditions used in this work and the electron transfer rate constant is calculated is 1.33 s⁻¹. The ITO electrode modified by cyt c/silica film possesses a high stability; even cyt c retains its redox activity following immobilization for several months. Furthermore, the electrocatalytic activities of the modified ITO electrode to hydrogen peroxide and ascorbic acid have been studied. Since these behaviors are quite pronounced, the modified electrode can be used for detection of hydrogen peroxide and ascorbic acid.     

Controlled nanozeolite-assembled electrode: remarkable enzyme-immobilization ability and high sensitivity as biosensor

An enzyme-immobilized nanozeolite-assembled electrode was prepared by controlled assembly of nanometer-sized Linder type-L zeolite (nano-LTL-zeolite) on an indium tin oxide (ITO) glass electrode surface, and subsequent immobilization of cytochrome c. Cyclic voltammetric (CV) and amperometric experiments showed that, relative to other reported electrodes, the enzyme-immobilized electrodes possess fast electron-transfer rates (2.2 s(-1)), a broad linear range (15-540 micromol L(-1)), a low detection limit (3.2 nmol L(-1)), a remarkably long lifetime (5 months), and high stability in the pH range 5-10. These characteristics could be due to the fact that nanozeolites assembled on ITO have high immobilization ability and facilitate interaction with enzymes. The function controllability of these enzyme electrodes, resulting from the facile manipulability of nanozeolite-assembled layers, may provide a possibility to rationally design biosensors.     

Study of the immobilization of alcohol dehydrogenase on Au-colloid modified gold electrode by piezoelectric quartz crystal sensor,cyclic voltammetry,and electrochemical impedance techniques

The immobilization of alcohol dehydrogenase (ADH) on Au-colloid modified gold electrodes has been investigated. Colloidal Au was first self-assembled onto gold electrodes through the thiol groups of an 1,6-hexanedithiol monolayer. Piezoelectric quartz crystal sensor, cyclic voltammetry, and electrochemical impedance techniques were used to investigate the immobilization of ADH on Au colloids. The cyclic voltammogram tends to be more irreversible with increased ADH concentration. In the impedance spectroscopic study, an obvious difference of the electron transfer resistance between the Au-colloid modified electrode and the bare gold electrode was observed. Using the piezoelectric quartz crystal sensor, the Michaelis constant, K(m), and the maximum initial rate, V(max), of the immobilized ADH were estimated as 6.03 x 10(-4) M and 0.63 Hzs (-1), respectively. The binding constant of ADH with nicotinamide adenine dinucleotide (NAD) was also determined as 1.87 x 10(4) M(-1). Experimental results showed that colloidal Au can be used as a biocompatible matrix for enzyme immobilization.     

Characterization of protein-attached conducting polymer monolayer

Cytochrome c (cyt c)-immobilized monolayers and multiple monolayers of a conducting polymer [poly(terthiophene-3-carboxylic acid) polymer (poly-TTCA)] were prepared, where the monolayer of monomer precursor was fabricated with the Langmuir-Blogett technique. Covalent immobilization of cyt c was achieved by the formation of an amide bond between the carboxylic groups of the conducting polymer and amines groups of lysine in cyt c. The monolayer of poly-TTCA and poly-TTCA/cyt c was characterized by cyclic voltammetry, XPS, EQCM, Auger electron spectra (AES), and atomic force microscopy (AFM). The immobilization of cyt c on the polymer layer reveals the direct electron-transfer processes of cyt c. Cyclic voltammetry of the poly-TTCA/cyt c-modified electrode showed a pair of reversible peaks at approximately +212/+201 mV (Epa/Epc) versus Ag/AgCl in a 0.2 M phosphate buffer solution (pH 7.0). The peak separation and the redox peak current of the poly-TTCA/cyt c-modified electrodes were gradually increased by increasing the number of poly-TTCA/cyt c layers on the electrode. The heterogeneous electron-transfer rate constant (ks) of cyt c at the poly-TTCA/cyt c-monolayer-modified electrode was estimated to be 0.874 s(-1). The method provides a novel route for the fabrication of protein (cyt c)-immobilized and/or lipid (palmitoyloleoylphosphatidic acid)-immobilized monolayers and multiple monolayers of a conducting polymer. Cyt c bonded on the conductive polymer layers was applied for bioelectronic devices with unique functionality.     

Covalent modification of glassy carbon electrodes with beta-alanine for voltammetric separation of dopamine and ascorbic acid.

beta-Alanine was covalently grafted on a glassy carbon electrode (GCE) by amine cation radical formation in the electrooxidation process of the amino-containing compound. X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV) proved the immobilization of beta-alanine monolayer on GCE. The electrode shows strong electrocatalytic functions to dopamine (DA) and ascorbic acid (AA), reducing the overpotentials by 0.20 V and 0.23 V, respectively. Due to its different catalytic effects toward DA and AA, the modified electrode resolved the overlapping voltammetric responses of DA and AA into two well-defined voltammetric peaks by CV or differential pulse voltammetry (DPV), which can be used for the simultaneous determination of these species in a mixture. The catalytic peak current obtained from DPV was linearly related to DA and AA concentrations in the ranges of 4.0 x 10(-6)-5.0 x 10(-4) mol/L and 2.0 x 10(-5)-6.0 x 10(-3) mol/L with correlation coefficients of 0.997 and 0.995, respectively. The detection limits (3 sigma) for DA and AA were 2.4 x 10(-6) mol/L and 1.2 x 10(-5) mol/L, respectively. The electrode shows good sensitivity, selectivity and stability, and has been applied to the determination of DA and AA simultaneously in samples with satisfactory results.     

吡啶、2-甲基吡啶存在下细胞色素c碱式异构化和配体细胞色素c配合物的电化学研究

用半胱氨酸修饰的金电极研究了吡啶、2 甲基吡啶存在下细胞色素c碱式异构化和配体结合细胞色素c的电化学。在此电极上 ,细胞色素c可发生准可逆的电极反应而吡啶结合细胞色素c和 2 甲基吡啶结合细胞色素c在循环伏安图上只给出还原峰。高浓度 (1.2 7mol·L- 1)的吡啶和 2 甲基吡啶可诱导碱式细胞色素c在中性条件下生成。进一步的研究表明 ,这种诱导作用与配体和细胞色素c的键合无关     

Preparation and characterization of polyoxometalate/protein ultrathin films grown on electrode surfaces using layer-by-layer assembly

We report a new electrostatic layer-by-layer assembly method for the controlled deposition of electrocatalytically active enzymes onto electrode surfaces using polyoxometalate as the counteranion. Cytochrome c (cyt c), a redox active protein, and P(2)W(18)O(62)(6-), a Dawson-type polyoxometalate, were deposited onto glassy carbon electrodes by two procedures: static dipping and electrochemical cycling. Cyclic voltammetry and UV-vis spectroscopy reveal that approximately 1.5 x 10(-10) mol/cm(2) of P(2)W(18)O(62)(6-) and 2.2 x 10(-11) mol/cm(2) of cytochrome c are deposited per cycle, which correspond to approximately one monolayer of each molecule. The thicknesses of the resulting films measured by atomic force microscopy also indicate that the films are formed in a layer-by-layer fashion. Experimental factors that affect electron-transfer rate in these films, such as scan rate and film thickness, were systematically analyzed. The use of {P(2)W(18)O(62)(6-)/cyt c}n films to catalyze hydrogen peroxide reduction was demonstrated.     

季铵盐掺杂聚苯胺电极的电容性能

采用循环伏安法,在铂电极表面聚合制备了季铵盐[CnH2n+1N(CH3)3]Cl(n=12,14,16,18)掺杂的聚苯胺修饰电极。 利用扫描电子显微镜、红外光谱以及X射线衍射对复合电极的表面形貌和结构进行了表征。 用循环伏安法、交流阻抗和恒电流充放电测试对电极的电化学性质和电容行为进行了系统研究。 结果表明,其中[C18H37N(CH3)3]Cl季铵盐掺杂的聚苯胺复合电极比表面积大,电容性能好,在2×10-3 A的充电电流下,初始比电容高达329.6 F/g,未掺杂电极比电容为199.0 F/g。 而且,复合电极的循环稳定性良好,经30次循环后比电容保持为252.4 F/g。     

A high-sensitive amperometric hydrogen peroxide biosensor based on the immobilization of hemoglobin on gold colloid/L-cysteine/gold colloid/nanoparticles Pt-chitosan composite film-modified platinum disk electrode

A hemoglobin (Hb)/gold colloid (nano-Au)/L-cysteine (L-cys)/nano-Au/nanoparticles Pt (nano-Pt)-chitosan (CHIT) composite film-modified platinum disk electrode (abbreviated to modified electrode) has been prepared to construct a biosensor for determination of H(2)O(2). The electrochemical characteristics of the biosensor were studied by cyclic voltammetry and chronoamperometry. The modified process was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The morphologies of different composite film were investigated with scanning electron microscopy (SEM) and the element of composite film was investigated with X-ray photoelectron spectroscopy (XPS). Analytical parameters such as pH and temperature were also studied. The linear range for the determination of H(2)O(2) is 1.4 x 10(-7) to 6.6 x 10(-3)mol/L with a detection limit of 4.5 x 10(-8)mol/L (S/N=3). The sensor achieved 95% of the steady-state current within 10s. The sensor exhibited high sensitivity (17.62 microA/(mmol L)), selectivity and stability. The method is applied to the determination of H(2)O(2) with satisfactory results.     

Electrochemical Investigation of Metal Oxide Conducting Electrodes for Direct Detection of Sulfide

This study examined the performance of four conducting metal oxide electrodes for the direct electrochemical analysis of sulfide; the electrode materials studied were indium tin oxide (ITO), fluorine doped tin oxide (FTO), aluminum doped zinc oxide (AZO) and gallium doped zinc oxide (GZO). Cyclic voltammetry (CV) results obtained using the ITO, AZO, GZO and FTO electrodes showed direct electrooxidation peak potential of sulfide at 381, 507, 400, and 850 mV vs. Ag/AgCl, respectively; however, the less positive oxidation potential and high catalytic current response of the ITO electrode made it the electrode of choice for the direct oxidation of sulfide. The effects of different electrolytes and buffer solutions on the CV responses were also evaluated. A linear concentration range up to 350 µM and a detection limit of 8.0 µM were achieved. CV response was highly reproducible, remaining unaffected even after 50 measurements. The sensor was found to have good selectivity, with no interference from sulfite, sulfate or chloride ions. The present findings demonstrate that the bare ITO electrode can be used as the basis of an inexpensive, sensitive, selective and robust sulfide sensor.     

Covalent modification of glassy carbon electrodes with glycine for voltammetric separation of dopamine and ascorbic acid

Glycine was covalently grafted on to a glassy carbon electrode (GCE) by amine cation radical formation in electrooxidation of the amino-containing compound. X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry proved the immobilization of glycine on the GCE. The modified electrode reduced the overpotentials of dopamine (DA) and ascorbic acid (AA) by approximately 0.15 V and 0.23 V, respectively, and resolved the overlapping voltammetric response of DA and AA into two well-defined voltammetric peaks in cyclic voltammetry (CV) or differential pulse voltammetry (DPV), unlike the unmodified GCE; this can be used for the simultaneous determination of these species in a mixture. The differential pulse peak current was linearly dependent on DA and AA concentration in the range 5 x 10(-6)-8 x 10(-4) mol L(-1) and 6 x 10(-5)-4 x 10(-3) mol L(-1), with correlation coefficients of 0.996 and 0.994, respectively. The detection limits (3delta) for DA and AA were 1.8 x 10(-6) mol L(-1) and 2.1 x 10(-5) mol L(-1), respectively. The modified electrode is very sensitive, selective and stable, and has been applied to the determination of DA and AA simultaneously in samples with satisfactory results.     

Facile deposition of [60]fullerene and carbon nanotubes on ITO electrode by electrochemical oxidative polymerization of ethylenedioxythiophene

It was found that [60]fullerene encapsulated in p-sulfonatocalix[8]arene and single-walled carbon nanotubes (SWNTs) solubilized by sodium dodecylsulfate can be readily deposited on the ITO electrode by electrochemical oxidative polymerization of ethylenedioxythiophene (EDOT) without chemical modification of these carbon clusters. The driving force for the deposition is an electrostatic interaction between the anionic complexes and the cationic charges of poly(EDOT) formed in the oxidative polymerization process. The surface morphology was thoroughly characterized by scanning electron micrograph: the [60]fullerene/poly(EDOT) film is covered by nano-particles with 20-100 nm diameters whereas the SWNTs/poly(EDOT) film is covered by nanorods with several microm length and ca. 100 nm diameter. The results indicate that the anionic complexes act as nuclei for the polymer growth in the oxidation polymerization. Interestingly, when these modified ITO electrodes were photoirradiated, the appearance of a photocurrent wave was observed. The action spectra showed that the photoexcited energy of [60]fullerene or SWNTs is efficiently collected by the electroconductive poly(EDOT) film and transferred to the ITO electrode.     

Direct determination of brucine by square wave voltammetry on 4-amino-2-mercaptopyrimidine self-assembled monolayer gold electrode

4-Amino-2-mercaptopyrimidine self-assembled monolayer (AMP SAMs/Au) was prepared on a gold electrode. The AMP SAMs/Au was characterized by using attenuated total reflection-fourier transform infrared (ATR-FTIR) and A.C. Impedance. The electrochemical behavior of brucine on AMP SAMs/Au was studied by cyclic voltammetry (CV) and square wave adsorptive stripping voltammetry (SWASV). The modified electrode showed an excellent electrocatalytic activity for the redox of brucine. The catalytic current increased linearly with the concentration of brucine in the range of 4.0 x 10(-7) to 2.0 x 10(-4) mol l(-1) by square wave voltammetry response. The detection limit was 6.0 x 10(-8) mol l(-1).     

Physicochemical properties and sensing ability of metallophthalocyanines/chitosan nanocomposites

Electroactive nanostructured films of chitosan (Ch) and tetrasulfonated metallophthalocyanines containing nickel (NiTsPc), copper (CuTsPc), and iron (FeTsPc) were produced via the electrostatic layer-by-layer (LbL) technique. The multilayer formation was monitored with UV-vis spectroscopy by measuring the increase of the Q-band absorption from metallophthalocyanines. Results from transmission and reflection infrared spectroscopy suggested specific interactions between SO(3)(-) groups from metallophthalocyanines and NH(3)(+) from chitosan. The electroactive multilayered films assembled onto an ITO electrode were characterized by cyclic voltammetry, with Ch/NiTsPc films showing higher stability and well-defined voltammograms displaying reversible redox peaks at 0.80 and 0.75 V. These films could be used to detect dopamine (DA) in the concentration range from 5.0 x 10(-6) to 1.5 x 10(-4) mol L(-1). Also, ITO-(Ch/NiTsPc)(n)() electrodes showed higher electrocatalytic activity for DA oxidation when compared with a bare ITO electrode. On the other hand, only the Ch/FeTsPc and Ch/CuTsPc modified electrodes could distinguish between DA and ascorbic acid. These results demonstrate that versatile electrodes can be prepared by incorporation of different metallophthalocyanine molecules in LbL films, which may be used in bioanalytical applications.     

Electrochemical,microscopic, and EQCM studies of cathodic electrodeposition of ZnO/FAD and anodic polymerization of FAD films modified electrodes and their electrocatalytic properties

Two kinds of chemically modified electrodes were prepared. In the first type of electrodes, zinc oxide (ZnO) and flavin adenine dinucleotide (FAD) molecules were deposited onto the glassy carbon-, gold-, and SnO₂-coated glass electrodes by using cyclic voltammetry from the bath solution containing aqueous 0.1 M zinc nitrate, 0.1 M sodium nitrate, and 1 × 10⁻⁴ M FAD. It was called as ZnO/FAD modified electrodes. The second type of modified electrode was prepared by the electropolymerization method. Electrochemical polymerization of FAD was carried out from the acidic solution containing 1 × 10⁻⁴ M FAD monomers onto electrode surfaces. This poly(FAD)-modified electrode yields a new redox couple in addition to the monomers redox couple. The influence of the concentrations, pH, and electrocatalytic properties of the ZnO/FAD- and poly(FAD)-modified electrodes are investigated by means of the in situ technique electrochemical quartz–crystal microgravimetry (EQCM) combined with cyclic voltammetry and the ex situ technique scanning electron microscopy. From these studies, it appears that the cathodic deposition of ZnO/FAD-modified electrodes gives only one redox couple, and the anodically polymerized FAD film-modified electrodes gives two reversible redox couples. The pH dependence of the redox responses were investigated and the kinetics of electron transfer was evaluated. In addition, the EQCM technique was employed to follow the deposition process of both kinds of modified electrodes in real time as well as the characteristics of the charge transfer associated with the surface-confined redox-active couples. The electrocatalytic activity of the poly(FAD)-modified electrode towards the reduction of hydrogen peroxide and the oxidation of dopamine and ascorbic acid was explored. The important electrocatalytic properties of poly(FAD)-modified electrode were observed for simultaneous separation of dopamine and ascorbic acid in neutral solution. This poly(FAD)-modified electrode has several advantages than the previously reported FAD-modified electrodes.     

A novel ferroceneylazobenzene self-assembled monolayer on an ITO electrode: photochemical and electrochemical behaviors

A novel ferroceneylazobenzene self-assembled monolayer (SAM) has been constructed on an indium-tin oxide (ITO) electrode via the covalent attachment of 4-(4'-11-ferrocenyl-undecanoxyphenylazo)benzoic acid ( FcAzCOOH) onto a silanized ITO substrate surface and verified by reflectance infrared spectroscopy and water contact angle. Atomic force microscopy (AFM) and cyclic voltammogram (CV) indicated that the FcAzCOOH formed a uniform and reproducible SAM on the ITO electrode with a surface coverage of ca. 1.9 x 10 (-10) mol/cm (2) (87 A (2)/molecule). The reversible photoisomerization behavior of the SAM was characterized by UV-vis spectra. The azo pi-pi* transition band intensity of the SAM gradually decreased with UV (365 nm) irradiation and was almost recovered again when subsequent exposure to ambient room light (400-800 nm). The increased tilt angle of the molecules on the ITO substrate after UV irradiation further confirmed the trans-to- cis isomerization of azobenzene moieties. The CV of the trans- FcAzCOOH modified ITO electrode showed a pair of waves due to redox of the ferrocene groups in the potential range of 0 to +800 mV (vs SCE), and the peak separation of the redox wave became larger after UV irradiation and almost returned to its original value after subsequent exposure to the visible light. Rate-dependent CV curves indicated that the charge transfer rate between the ferrocene species in the SAM and the ITO electrode was slowed down after UV irradiation due to the smaller porosity of the monolayer film and the more compact barrier layer between the redox species and the ITO electrode. It is the first time to directly observe the influence of photoisomerization of the azobenzene moiety on the redox behavior of redox species in the ferroceneylazobenzene-functionalized SAM. The present results provide profound insight into the role of redox microenvironment on electron transfer kinetics and also provide a simple and facile approach to the preparation of photocontrollable electrodes.     

Electrophoretically deposited polyaniline nanotubes based film for cholesterol detection

Polyaniline nanotube (PANI-NT) based films have been fabricated onto indium-tin-oxide (ITO) coated glass plates via electrophoretic technique. These PANI-NT/ITO electrodes have been utilized for covalent immobilization of cholesterol oxidase (ChOx) using glutaraldehyde (Glu) as cross-linker. Structural, morphological and electrochemical characterization of PANI-NT/ITO electrode and ChOx/Glu/PANI-NT/ITO bioelectrode have been done using FT-IR spectroscopy, SEM, electrochemical impedance spectroscopy and cyclic voltammetry techniques. Response studies of the ChOx/Glu/PANI-NT/ITO bioelectrode have been carried out using both linear sweep voltammetry and UV-Visible spectrophotometry. The results of the biosensing studies reveal that this bioelectrode can be used to detect cholesterol in wide detection range of 25-500 mg/dL with high sensitivity of 3.36 mA mg(-1) dL and fast response time of 30 s at pH 7.4. This bioelectrode exhibits very low value of Michaelis-Menten constant of 1.18 mM indicating enhanced interactions between cholesterol and ChOx immobilized onto this nanostructured PANI matrix.     

Electrochemical properties of myoglobin deposited on multi-walled carbon nanotube/ciprofloxacin film

We report the direct electrochemical and electrocatalytic properties of myoglobin (MB) on a multi-walled carbon nanotube/ciprofloxacin (MWCNT/CF) film-modified electrode. A highly homogeneous MWCNT thin-film was prepared on an electrode surface using ciprofloxacin (CF) as a dispersing agent. MB was then electrochemically deposited onto the MWCNT/CF-modified electrode. The MB/MWCNT/CF film was characterized by scanning electron microscopy and UV-visible spectroscopy (UV-vis). UV-vis spectra confirmed that MB retained its original state on the MWCNT/CF film. Direct electrochemical properties of MB on the MWCNT/CF film were investigated by cyclic voltammetry. The formal potential and electron transfer rate constant were evaluated in pH 7.2 buffer solution as -0.327V and 300s(-1), respectively. In addition, the MB/MWCNT/CF-modified electrode showed excellent electrocatalytic properties for the reduction of hydrogen peroxide (H(2)O(2)). The MB/MWCNT/CF-modified electrode was used for the detection of H(2)O(2) at concentrations from 1×10(-6)M to 7×10(-4)M in pH 7.2 buffer solution. Overall, the MB/MWCNT/CF-modified electrode was very stable and has potential for development as a H(2)O(2) sensor.     

Electrochemical characterization of a superoxide biosensor based on the co-immobilization of cytochrome c and XOD on SAM-modified gold electrodes and application to garlic samples

This paper describes the characterization and optimization of an amperometric cytochrome c (cyt c)-based sensor for the determination of the antioxidant capacity of pure substances and natural samples. The cyt c and the xanthine oxidase (XOD) enzyme were co-immobilized on the electrode using the combination of several long-chain thiols. The self-assembled monolayer (SAM) was optimized in terms of composition and ratio between thiols. The immobilization protocol for both cyt c and XOD and the SAM formation time were evaluated through electrochemical methods, such as cyclic voltammetry (CV), square wave voltammetry (SWV), chronoamperometry (CA) and impedance spectroscopy (IS). Finally, the biosensor was applied to the determination of the antioxidant capacity of pure alliin and two compounds extracted from garlic bulbs.     

Direct electrodeposition of gold nanoparticles onto indium tin oxide film coated glass: Application to the detection of arsenic(III).

Gold nanoparticle modified indium tin oxide (ITO) film coated glass electrodes were prepared for the first time through direct electrochemical deposition from 0.5 M H2SO4 containing 0.1 mM HAuCl4. The resulting electrode surfaces were characterized with AFM. Cyclic voltammetry and linear sweep voltammetry (LSV) of arsenic(III) on the modified electrodes were performed. After optimization, a LOD of 5 +/- 0.2 ppb was obtained with 60 s deposition at -0.6 V (vs. SCE) in 1 M HNO3 using LSV.