The pressure dependences of elastic and lattice dynamic properties of AlAs from ab initio calculations

Ab initio calculations,based on norm-conserving nonlocal pseudopotentials and density functional theory(DFT),are performed to investigate the structural,elastic,dielectric,and vibrational properties of aluminum arsenide(AlAs) with a zinc-blende(B3) structure and a nickel arsenide(B81) structure under hydrostatic pressure.Firstly,the path for the phase transition from B3 to B81 is confirmed by analyzing the energies of different structures,which is in good agreement with previous theoretical results.Secondly,we find that the elastic constants,bulk modulus,static dielectric constants,and the optical phonon frequencies vary in a nearly linear manner under hydrostatic pressure.What is more,the softening mode of the transversal acoustic mode at the X point supports the phase transition in AlAs.     

Electronic,elastic and dynamical properties of MgSe under pressure: rocksalt and iron silicide phase

The electronic, elastic and dynamical properties of MgSe in the rocksalt (B1) and iron silicide (B28) phase and the effects of pressure on these properties are investigated using first-principles method. The calculated electronic band structure indicates that the B1 phase of MgSe presents an indirect band-gap feature and the band gaps initially increase with pressure and subsequently decrease upon compression. Remarkably, an indirect-to-direct band-gap transition has been observed at the phase transition pressure. The elastic constants, bulk modulus, shear modulus, Young’s modulus, elastic anisotropy and B/G ratio of MgSe in the B1 and B28 phase at high pressure have also been investigated. The bulk modulus, shear modulus and Young’s modulus all increase monotonously with the increasing of pressure for the B1 and B28 phase of MgSe. The calculated phonon frequencies of the B1 phase at zero pressure agree well with available theoretical results. And the transverse acoustic phonon TA(X) mode of this phase completely softening to zero at 82 GPa. The phonon curves of the B28 phase under pressure have also been successfully investigated.     

高压下CaPo弹性性质和热力学性质的第一性原理研究

利用密度泛函理论的平面波赝势方法预测研究了CaPo从岩盐结构(B1结构)到氯化铯结构(B2结构)的相变以及B1结构CaPo高压下的弹性性质以及热力学性质等.通过等焓原理发现B1→B2的相变压力为22.8GPa. 同时计算了B1结构CaPo高压下的弹性常数以及剪切模量、杨氏模量等相关弹性参数,结果发现当压力超过20GPa时,B1结构CaPo开始不稳定了,这和等焓原理所得结果相符合. 最后通过Debye模型成功获取了B1结构C 关键词： 相变 弹性性质 热力学性质 CaPo     

Phase transition, elastic, thermodynamic properties of zinc-blend BeSe from first-principles

The structural phase transition, elastic, thermodynamics properties of BeSe in zinc-blende were investigated by performing first-principles calculations within generalized gradient approximation. The phase transition pressure P_t between the B3 phase and the B8 phase of BeSe was determined. The pressure dependencies of elastic constants, shear modulus, Young's modulus, and Poisson's ratio of BeSe are calculated. The thermodynamic properties of the zinc-blende structure BeSe are calculated by using the quasi-harmonic Debye model. The pressure and temperature dependencies of the heat capacity and the thermal expansion coefficient, as well as the Grüneisen parameter are investigated systematically in the ranges of 0–50 GPa and 0–1200 K.     

等静压下0.75Pb（Mg1/3Nb2/3）O3-0.25PbTiO3陶瓷的介电性能研究

研究了等静压对0.75Pb（Mg_1/3Nb_2/3）O₃-0.25PbTiO₃（PMN-25PT）陶瓷介电温谱的影响,PMN-25PT剩余极化随等静压变化和等静压压致相变.结果表明,随着压力增加,PMN-25PT的介电峰值温度T_m降低,/+{dT_m}/-{dP}≈-4℃/kbar,极化弛豫增强;剩余极化随压力增加连续减小;介电常数对压力的依赖关系与对温度场的依赖相似,压力诱导PMN-25PT发生弛豫铁电—顺电相变,相变为宽化的渐变过程,频率色散和极化弛豫更加强烈和普遍. 关键词： 铌镁酸铅-钛酸铅 等静压 介电弛豫 压致相变     

Characterisation of the high-pressure structural transition and elastic properties in boron arsenic

This paper carries out the First principles calculation of the crystal structures (zinc blende (B3) and rocksalt (B1)) and phase transition of boron arsenic (BAs) based on the density-functional theory. Using the relation between enthalpy and pressure, it finds that the transition phase from the B3 structural to the B1 structural occurs at the pressure of 113.42GPa. Then the elastic constants C₁₁, C₁₂, C₄₄, bulk modulus, shear modulus, Young modulus, anisotropy factor, Kleinman parameter and Poisson ratio are discussed in detail for two polymorphs of BAs. The results of the structural parameters and elastic properties in B3 structure are in good agreement with the available theoretical and experimental values.     

AlAs相变及热动力学性质的第一性原理研究

利用基于密度泛函理论的全势能线性糕模轨函法研究了闪锌矿（B3）,NiAs（B8）和岩盐（B1）结构的AlAs的相变、结构性质以及热动力学性质.对B3-B8和B3-B1结构的能量体积曲线做公切线,得到了B3→B8相变压力为5.44 GPa,并预测到B3→B1相变压力为6.46 GPa.同时计算了高压下B8相的结构性质,结果显示当V/V₀≈0.7—1.05时,c/a基本保持恒定（仅有约 0.2%的波动）;当V/V₀≈0.4—0.7,c/a随着V/V₀的减小而近似线性地增大.通过状态方程拟合,得到了AlAs的相对体积V/V₀与压强P的函数关系,B8相的状态方程与实验结果符合很好.最后利用准谐德拜模型得到了AlAs的体弹模量B随压力P的变化关系以及不同压强下热容C_V与温度T的关系. 关键词： 相变 热力学性质 第一性原理     

Elastic behaviour under pressure of the cluster compound (Ag6Ge4P12)Ge6

The elastic stiffness constants of the cluster compound (Ag₆Ge₄P₁₂)Ge₆ have been measured by the ultrasonic pulse-echo overlap technique and are found to conform quite closely with those of zincblende structure compounds. The hydrostatic pressure dependences of the elastic constants and also the third-order elastic constants have been measured. It is found that, unlike the zincblende structure compounds, this compound does not show any tendency towards shear mode softening under pressure, all the long wavelength acoustic mode Grüneisen gammas being positive.     

Structural phase transition and elastic properties of ZnSe at high pressure

We have evolved an effective interionic interaction potential to investigate the pressure-induced phase transitions from zinc blende (B3) to rock salt (B1) structure in II-VI [ZnSe] semiconductors. The elastic constants, including the long-range Coulomb and van der Waals (vdW) interactions and the short-range repulsive interaction of up to second-neighbor ions within the Hafemeister and Flygare approach, are deduced. Keeping in mind that both of the ions are polarisable, we employed the Slater-Kirkwood variational method to estimate the vdW coefficients. The estimated value of the phase transition pressure (P _t ) is higher than in the reported data, and the magnitude of the discontinuity in volume at the transition pressure is consistent with that data. The major volume discontinuity in the pressure-volume phase diagram identifies the structural phase transition from zinc blende to rock salt structure.

The variation of second-order elastic constants with pressure resembles that observed in some binary semiconductors. It is inferred that the vdW interaction is effective in obtaining the thermodynamic parameters such as the Debye temperature, the Gruneisen parameter, the thermal expansion coefficient and the compressibility. However, the inconsistency between the thermodynamic parameters as obtained from present model calculations and their experimental values is attributed to the fact that we have derived our expressions by assuming the overlap repulsion to be significant only up to the nearest second-neighbor ions, as well as neglecting thermal effects. It is thus argued that full analysis of the many physical interactions that are essential to binary semiconductors will lead to a consistent explanation of the structural and elastic properties of II–VI semiconductors.     

High pressure behavior of alkaline earth tellurides

We have predicted high pressure structural behavior and elastic properties of alkaline earth tellurides (AETe; AE = Ca, Sr, Ba) by using two body interionic potential approach with modified ionic charge (Z _m e). This method has been found quite satisfactory in case of the rare earth compounds. The equation of state curve, structural phase transition pressure from NaCl (B1) to CsCl (B2) phase and associated volume collapse at transition pressure of alkaline earth tellurides (AETe) obtained from this approach, so have been compared with experimentally measured data reveal good agreement. We have also investigated bulk modulus, second and third order elastic constants and pressure derivatives of second order elastic constants at ambient pressure which shows predominantly ionic nature of these compounds. First time, we have calculated the Poisson ratio, Young and Shear modulus of these compounds.      

Temperature and pressure dependences of the properties and phase transition in paratellurite (TeO2: Ultrasonic,dielectric and Raman and Brillouin scattering results

The effects of temperature and pressure on the ultrasonic propagation properties, dielectric constants and the Raman and Brillouin spectra in paratellurite (TeO₂) were investigated with emphasis on the behavior in the vicinity of the newly-discovered, pressure-induced phase transition. The transition is found to be second-order and purely strain-induced, driven by a soft shear acoustic mode propagating along a <110〉 and polarized along a (110) crystal direction. Such pure-strain transitions were previously discussed by Anderson and Blount and the transition in paratellurite is the first observation of this kind of transition. No evidence was found for any coupling of the soft mode to any other acoustic or optic mode, although small anomalies associated with lattice strains accompanying the transition were observed in some of the elastic and dielectric constants. Analysis of the effective elastic constant C, governing the soft mode velocity indicates that, within experimental uncertainty, the transition can be described by mean-field theory. Although the apparent attenuation of the soft mode increased significantly near the transition, it is concluded that this effect is probably due to the fact that the phase and group velocities are not parallel rather than to intrinsic dissipative processes in the crystal. With the exception of C₄₄, the remaining elastic constants and Raman-active phonon frequencies displayed normal increases with pressure. No soft Raman-active modes were observed in either phase. The static dielectric constants ?₁ are large, due to the large electronic polarizability of TeO₂, and the anisotropy in ? results almost entirely from the anisotropy in the optical dielectric constants ?_∞. In the low pressure tetragonal phase both ?_a and ?_c exhibit normal temperature dependences and ?_c decreases with pressure; however, ?_a exhibits an anomalous increase with pressure. Temperature, pressure and uniaxial stress measurements are combined to evaluate the various contributions to the temperature and pressure dependences of ?. Combining the ? data with available i.r. measurements demonstrated that the generalized Lyddane-Sachs-Teller relation is well obeyed for TeO₂. Finally, the Szigetti effective charge ratios were determined for the lowest frequency IR-active modes. These ratios were found to be quite low, being 0.27 and 0.18 for the a-axis responses, respectively, indicating that the bonding is highly covalent.     

High pressure behavior and structural properties of transition metal carbides

A pressure induced structural phase transition from NaCl-type (B₁) to CsCl-type (B₂) structure has been predicted in transition metal carbides, namely TiC, ZrC, NbC, HfC, and TaC by using an interionic potential theory with modified ionic charge (Z_m ), which includes Coulomb screening effect due to d-electron. The phase transition pressure (P_T ) relies on large volume discontinuity in pressure–volume relationship, and identifies the structural phase transition from B₁ phase to B₂ phase. The variation of second-order elastic constants with pressure follows a systematic trend identical to that observed in other compounds of NaCl-type structure. The Born criterion for stability is found to be valid in transition metal carbides.     

Investigations of phase transition, elastic and thermodynamic properties of GaP by using the density functional theory

The phase transition of gallium phosphide (GaP) from zinc-blende (ZB) to a rocksalt (RS) structure is investigated by the plane-wave pseudopotential density functional theory (DFT). Lattice constant a₀, elastic constants c_ij, bulk modulus B₀ and the pressure derivative of bulk modulus B₀' are calculated. The results are in good agreement with numerous experimental and theoretical data. From the usual condition of equal enthalpies, the phase transition from the ZB to the RS structure occurs at 21.9 GPa, which is close to the experimental value of 22.0 GPa. The elastic properties of GaP with the ZB structure in a pressure range from 0 GPa to 21.9 GPa and those of the RS structure in a pressure range of pressures from 21.9 GPa to 40 GPa are obtained. According to the quasi-harmonic Debye model, in which the phononic effects are considered, the normalized volume V/V₀, the Debye temperature θ, the heat capacity C_v and the thermal expansion coefficient α are also discussed in a pressure range from 0 GPa to 40 GPa and a temperature range from 0 K to 1500 K.     

高压下LiKSO4介电和弹性特性的反常及p—T相图

本文通过对不同温度T(150—350K)和压力p(0—10kbar)范围内LiKSO₄晶体介电和弹性性质的研究,发现在室温8.2kbar(对应于升压过程),和4kbar(对应于降压过程)附近介电和弹性系数有突变。我们把它归结为压力诱导的LiKSO₄相转变。这个相变过程伴随着很大的压力滞后现象。本文还给出了LiKSO₄在上述温度和压力范围内的p-T相图。并发现在3.8kbar和281K处存在一个三相点。 关键词：     

High pressure structural phase transition in uranium monochalcogenides

The pressure induced phase transition in uranium monochalcogenides, UX (X = S, Se, and Te) is studied by two-body potential approach. It is found that US, USe and UTe undergo a structural phase transition from NaCl (B1) type to CsCl (B2) type at 78.5, 21 and 9.5 GPa, respectively, which is in good agreement with the recent experimental data. In addition, second-order elastic constants (SOECs) (C ₁₁, C ₁₂ and C ₁₄) have been calculated which can be used to establish the nature of the forces in these materials. The present study shows that the considered two-body potential model can be used to predict the phase transition pressure in UX compounds provided the strength and hardness parameters in B1 and B2 phases are different.     

First principle calculation of elastic and thermodynamic properties of stishovite

Using ab initio plane-wave pseudo-potential density functional theory method,the elastic constants and band structures of stishovite were calculated.The calculated elastic constants under ambient conditions agree well with previous experimental and theoretical data.C13,C33,C44,and C66 increase nearly linearly with pressure while C 11 and C 12 show irregularly changes with pressure over 20 GPa.The shear modulus(C11-C12)/2 was observed to decrease drastically between 40 GPa and 50 GPa,indicating acoustic mode softening in consistency with the phase transition to CaCl 2-type structure around 50 GPa.The calculated band structures show no obvious difference at 0 and 80 GPa,being consistent with the high incompressibility of stishovite.With a quasi-harmonic Debye model,thermodynamic properties of stishovite were also calculated and the results are in good agreement with available experimental data.     

First-principles study of phase transition and elastic properties of ScSb and YSb compounds

The phase transition of ScSb and YSb from the NaCl-type (B1) structure to the CsCl-type (B2) structure is investigated by the ab initio plane-wave pseudopotential density functional theory method. It is found that the pressures for transition from the B1 structure to the B2 structure obtained from the equal enthalpies are 38.3 and 32.1 GPa for ScSb and YSb, respectively. From the variations of elastic constants with pressure, we find that the B1 phase of ScSb and YSb compounds are unstable when applied pressures are larger than 46.3 and 64.2 GPa, respectively. Moreover, the detailed volume changes during phase transition are analyzed.     

Phase transition,structural, mechanical and thermal properties of erbium pnictides under pressure

In this article, we have investigated the high-pressure structural phase transition of erbium pnictides (ErX; X?=?N, P and As). An extended interaction potential model has been developed (including the zero-point energy effect in three-body interaction potential model). Phase transition pressures are associated with a sudden collapse in volume. The phase transition pressures and associated volume collapses have been predicted successfully. The elastic constants, their combinations and pressure derivatives are also reported. The pressure behaviour of elastic constants, bulk modulus and shear modulus have been presented and discussed. Moreover, the thermophysical properties such as molecular force constant (f), infrared absorption frequency (υ ₀), Debye temperature (θ _D) and Grunneisen parameter (γ) have also been predicted.     

First-principles studies of structural,mechanical, electronic,optical properties and pressure-induced phase transition of CuInO2 polymorph

Using the first-principles density-functional theory within the generalized gradient approximation (GGA), we have investigated the structural, elastic, mechanical, electronic, and optical properties and phase transition of CuInO₂. Structural parameters including lattice constants and internal parameter, pressure effects and phase transition pressure were calculated. We have obtained the elastic coefficients, bulk modulus, shear modulus, Young's modulus and Poisson's ratio. We find that two phases of CuInO₂ are indirect band gap semiconductors (F–Γ and H–Γ for 3R and 2H, respectively). Optical properties, including the dielectric function, refractive index, extinction coefficient, reflectivity, absorption coefficient, loss function and optical conductivity have been obtained for radiations of up to 30 eV.